Aperture does not show my Photostream adjustments

I know that everything involving Aperture, Photostream, etc are all up in the air for the time being (or at least until Yosemite/Photos are released) but I was wondering if I was missing something.
When I take a photo on my iPhone 6 (obviously running iOS 8) and then do some adjustments using the Photos app, the final image will appear properly (read after adjustments) on our other iOS devices (an iPhone 5 and two iPad Minis) but not on my Mac running Aperture - latest version. Any ideas on why or what I am missing/doing wrong?
Thanks,
Steve

Hi Leonie,
Not in front of my iMac now but whatever the latest release version of Aperture (I think it is 3.5.1 or something like that) is what I am running.
Yes - with "photo stream" - even though the iOS 8 devices no longer call it that. (If you mean am I using a "shared family photo stream", no, not yet, though that was suggested in another forum as a possible solution because then the edited version should show up in either Aperture or iPhoto.) The pictures taken from the iPhone 6 do get "uploaded" and do appear in Aperture in Photo Stream, but not showing the edits.
I don't see anything called "iCloud Photo Library Beta" in the settings for any of my iOS 8 devices. What I see under iCloud is "Photos" and then the option to turn on My Photo Stream (which is on) and iCloud Photo Sharing (which while also ON, as I said before I have not tried yet). If you are referring to "iCloud Drive", no that is not turned on as neither of my iMacs would be able to see it until Yosemite is released anyways.

Similar Messages

Aperture does not show tick box for shared photo stream as promised on the help screen

I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?

You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84

TS2518 I have Aperture 3.1.2 running on os 10.6.8. Aperture does not show focus points on my Nikon D7100, nor does it recognize the RAW files. Will upgrading Aperture allow me to see the focus points and RAW files again? Also, do I need to upgrade my os f

I have aperture 3.1.2 running on os 10.6.8 mac book pro. Lost some features in aperature when I upgraded my camera (no longer shows focus points, does not recognize RAW files) Would like to upgrade to aperture 3.5, but do not want to loose any pictures in my extensive library. Do I have to upgrade one vesion at a time, or can I jump? I believe I also need to upgrade my os, but not sure which to do first? Any help would be appreciated...

1. Can I get Icloud without having to upgrade to OS Lion?
Nope, you need 10.7.
2. If I upgrade to OS Lion, does this automatically put me onto ICloud
No, you set that up yourself.
3. I have three mobile me email addresses. One for myself, one for my wife and one I use for my business. What happens to these.
You can convert them to be used in iCloud.
4. My wife and I also use mobile me to sync our calendars across an Ipad (original) and two Iphones (3Gs). Both Iphones and Ipad are still currently using IOS4, and I am reluctant to upgrade this to IOS 5 as I have heard some horror stories. If I fail to upgrade to IOS 5, will this create confusion with my Apple ID's. (There already is a lot of confusion with these- Apple appear to not have down their homework)
If you don't change the settings you have now, I'm sure it will stay working. I believe Apple is phasing out MobileMe and you'd be forced to upgrade eventually.
5. Will Icloud allow me to transfer my Icalendar across seamlessly? This is Ical 4.04 whic came with my Imac. Does this get upgraded if I update to Lion?
Yes, it will get upgraded. I have my calendar on Lion and my iPhone 5.0.1 working seamlessly at the moment. That doesn't mean you won't have problems because with new technology that can be expected. Make sure you do a back up if you're worried about losing data.

Aperture does not show all the transition effects in slideshow

Hello,
I am making my first slideshow in Aperture since I thought it would be better than iphoto.
Finding it not as intuitive as I expected, have to say.
I want to control how each transition between the slides works, but when I get the inspector ( and even that wouldn't appear - I had to troubleshoot it, reboot and change the displays then set up a dummy slideshow to even get that to appear ) - there is only two options on each slide - default and selected slide, and even then I can only change the background colour and the "photo effect" to black and white - the options that show on the manual are not there.
I thought it might be because I was still using the Trial Version of Aperture, so I changed libraries and import the slideshow - only 1 photo appeared and still no options to change anything. Try again ... ok, now the photos are there but I have the same options as before - i.e. none. I tried to change the theme to Ken Burns and NOW the options appear, but does that mean you can only change the slideshow options in this theme and none of the others?
And I also can't figure out how to import a video onto the end of the photo slideshow ... When I have the slideshow screen up, there is no other option availabale ( that I can see ) to impot a video .. I'm starting to think imovie is the only way to do this?
Can anyone suggest anything ??
Thanks,
M

You'll want to check the status of the delivery - if it's waiting interfaces, you could have an inventory interface issue or possibly interface trip stop hasn't run. You can also check the workflow of the particular line to see what step is is stuck at.

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Round trip to PS CS3 does not show the saved image in Aperture 2.1.1

Good evening everyone; I hope someone can help me to solve this.
I have PS CS3 set as my external photo processing app (exports are PSD 16-bit 300 dpi) in Aperture 2.1.1. When I process the picture in CS3 and then save it(mind you I only SAVE, I do not do SAVE AS) as PSD (or TIFF) Aperture only shows me the original file in preview with the little circle informing me about the round trip to CS3. So the processed file does not show. Instead I only see two identical versions of the same photo.( I mean, I see the master and the version with the little circle).
If I save the work in PS CS3 as jpeg and then import into Aperture, it shows fine. When trying to import the processed and saved PSD and TIFF files, Aperture only shows the original file.
If it helps, I am working on layered pictures (HDR) where I use different parts of different pictures to get wide dynamic range. I export 3 or so photos from Aperture at once to CS3, process them into one, flatten the picture and save it.
And then Aperture just shows me the original file as version.
I have done this before 2.1.1 and it worked. Not sure if I have changed anything that might be causing this.
Thank you for your ideas.

I am sure it is not stacked under the original, unfortunately. Any other tips?
Also, as I mentioned earlier, even if I save the processed file in CS3 as PSD (so I use SAVE AS) and then try to import it into Aperture, it "magically" only shows the orginal (as if it was just importing some layer).

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

In my aperture the camera file name does not show under the photo how do I get it to show

In my aperature dislay the camera file number does not show how do I get it to show

Where exactly is the filename missing? Aperture has plenty of places to display metadata.
You configure and enable the display of metadata by defining Metadata presets. One place todo this is the little baggage label icon below the browser:
Press the icon,enable the display of metadata overlays for Browser and Viewer, then press "Edit" to customize the display of the tags you want to be displayed.
-- Léonie

In iPhoto 09 Info does not show tags on aperture, time, iso etc. Other tags like place, pixels are shown. There is no little arrow on this info menu to go to full info box. How come ?

in iPhoto 09 Info does not show tags on aperture, time, iso etc. Other tags like place, pixels are shown. There is no little arrow on this info menu to go to full info box. How come ?

It does. Photos Menu -> Show Extended Photo Information.
Then note the disclosure arrows as indictaed in this thread:
https://discussions.apple.com/message/16512794#16512794
Regards
TD

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Photostream does Not show up old photos on new iPad

I have Set up New iPad and it does Not show old photos in photostream.
How can I get them?
Thanks

Hey guys,
I have the following situation:
I've upgraded to Mountain Lion recently, and I decided to install a fresh copy (hence, backed up all the important data on my Mac)
However, after switching on the PhotoStream on the freshly installed iPhoto, I'm only able to see several of my photos. I'm sure that I saw many of my photos (e.g. from 2011) in my iPhoto's PhotoStream section, and I never copied them anywehre else (but still used to see them there).
Does it mean that if I never copied some of my older photos to my real HDD or to other drives, they are lost forever?
Thanks in adavance,
/A.

How to upgrade to aperture 3.5 when the app store does not show the update. I did buy aperture 3 on DVD not thru the app store. what to do?

I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?

If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
Have you already updated to Aperture 3.4.5 from the Support page Aperture 3.4.5?
Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
For some forum members it helped to set the main system language to English U.S. to make the update finally show.
Léonie

Need help Aperture 3 does not show thumbnails

Hello, after installing the Aperture 3, I found does not show thumbnails, tried to do everything he could, but nothing helped. Can anyone encountered this problem?

I've been having what seems to be permission related problems with previews. When you see no thumbnails, highlight all the images, right click on them and "delete previews", then "rebuild previews".
See if that fixes it.

When I open an image in Photoshop from Lightroom it does not show any adjustments, without restarting photoshop between each picture.

I am using Macbook Pro, Photoshop CC, and Lightroom 5.
The problem is: When I start edit in photoshop from Lightroom, the adjustment in Lightroom does not showing up in Photoshop. This has never been happen before while using Photoshop 6.
I have tried to reinstall the products several times, including OS Yosemite. But it does not help.

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

Aperture does not show my Photostream adjustments

Similar Messages

Maybe you are looking for