Aperture does not support Pentax K 3 RAW format. Any advises?

I just bought a Pentax K - 3 camera. Aperture does not support RAW format. Does anyone else have the same problem? Is there going to be Digital Camera RAW Compatibility Update for Pentax K 3?
I would be very pleased if someone could give me some advise,
Heikki

Only Apple knows when and if a specific camera's Raw format will be supported and they never say before they release the update.
In the meantime there a few different ways to work around this. One is to shoot Raw & JPG and use the JPG now and the Raw if and when the camera is supported. The other is to convert to DNG.
In the meantime let Apple know you want support for the camera, Aperture->Provide Aperture Feedback. Don;t know how much good is does but it can;t hurt.
regards
The list of supported cameras is here http://support.apple.com/kb/HT5955
Message was edited by: Frank Caggiano

Similar Messages

IPhoto does not support Canon Powershot S45 RAW Format

Hi,
It seems iPhoto does not support Canon Powershot S45 RAW file format. Can this be added to be supported!?
Does anyone know how to report this to Apple and request this as a feature enhancement?

Or this link: http://www.apple.com/feedback/iphoto.html

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Aperture does not support the more expensive Lumix cameras from Panasonic!

Aperture does not support RAW in the GF!, G1 or GH! cameras - cameras hailed as breakthroughs. Does anyone know why or when it may do so?

I believe that you posted in the AirPort forum by mistake. It appears that you intended to post this in the Aperture forum.

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

Aperture does not support SONY's new DSLR A100!!!

Just bought a SONY's new DSLR A100 and found Aperture does not read the camera's RAW file ( *.arw ). Is there any solution for this or I can only wait until Apple issue a software update for this?

The "format" will undoubtedly be the same or very similar: where the numbers representing each pixel are stored within the file, and where the metadata is kept. But what differs is the mapping of the number values to (I'm simplifying here a bit) actual colours. Different camera models from the same manufacturer have different sensors, and these output on different scales.
What Apple (and others) have to do is work out the ratios required for a given camera model, to get the right colours. Whilst you could probably edit the properties file yourself to make Aperture and MacOS recognise the file format, you'd have to do some work to decide the correct numbers (in some cases, you can use others work - there was an explanation on this forum previously about using DCraw source to determine good starting values for an Olympus camera.)
The DSLR-A100 has a different sensor from the 5D. There's another 4MP for starters. (Actually, I just had a glance at the latest DCraw code, and it looks like the A100 raw file is treated differently from other KM and Sony cameras. So perhaps they have got a new format.)

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?

I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

QuIcktime X does not support the .qtl media link format?

In the past I have been able to view NASA TV with Quicktime. I just go to the site and click the Quicktime link... I found out last night when I upgraded to Snow Leopard's QT X that the .QTL format used to connect to streaming Quicktime media no longer works...
What is the deal with that? QTL is a Quicktime format correct? It this just an outdated format?
Edit: I had to use RealPlayer instead. Yikes!
Message was edited by: JupiterGPL

I can reproduce this problem and installing Quicktime 7 from the optional installs in the DVD does not address the problem. QTL files can be used for streaming - the user downloads the qtl file which contains a link to an rtsp stream which then opens in the player.
http://developer.apple.com/legacy/mac/library/documentation/QuickTime/QT4WebPage /samplechap/special-11.html
This is described here and has worked forever. We use this to provide an open stream in Quicktime option in our software product - which does not work in snow leopard.

Confirmed: Aperture Does Not Support FZ30 RAW

Just a quick note to let everyone know that the Panasonic FZ30's RAW files are not recognized by Aperture.

I have emailed Panasonic asking them to work with apple to get support for panasonic RAW incorporated. I'd email Apple a well, but I've done it before without result.
Dustin.

Aperture does not support raw files from my Leica d-lux 6.

When will Aperture support RAW files from a Leica d-lux 6?

You can download a free copy of Adobe DNG Converter. You then can use this program to convert the D Lux RAW files into DNG RAW files. Aperture will be able to read the DNG files. This is a bit of pain but it will work until Apple supports the D Lux in its usual glacial time span.

Aperture does not support Small Raw files from Canon EOS 5D MK II

Hi,
I recently bought a new Canon EOS 5D MK II camera and started shooting on SmallRaw format, but Aperture simply refused to process those files. It only shows a preview of around 3 inches only. I don't know what's wrong either with my OS 10.5.6 or Aperture 2.
Now that I've returned to Digital Photo Professional from Canon to process the image. Please help, I don't want to break my workflow.
regards,
ashesh.

http://www.apple.com/feedback/aperture.html
or if you look at the application menus, it is in there too ...

Image cannot be rendered for editing b/c Aperture does not support this for

It's been about 3 weeks now. I've tried almost everything (short of uninstalling aperture). All of a sudden, when i tried to run my nik plugins through aperture I get this error message.
Im using a 450d, shooting RAW and never had a problem in the past. I've tried repairing, rebuilding and inspecting my library. I've tried restarting, i've tried merging it with a new library. I've tried updating everything, all to no avail.
Anyone have any advice?
Cheers
Message was edited by: simonnca
<Edited by Host>
erm, censored by apple?
Message was edited by: simonnca

Welcome to the discussions!
You mention that you get an error message, what is the message?
Try the following steps,
Delete you Aperture user preferences as detailed on the Aperture 3: Troubleshooting Basics page;
http://support.apple.com/kb/HT3805
Have you checked that your Nik plug-ins are up to date wi the latest release of Aperture, 3.1.1?
Let us know how this goes.
Tony

VLC does not support the audio or video format

"XVID" or "DIV3" which used to run fine on the same machine. VLC is not givin very much hints here:Unfortunately there is no way for you to fix this.
What needs to be installed after vlc to play these formats I used to do?

OK, quite randomly VLC appears to be able to play videos again.
T
Last edited by theking2 (2010-03-07 21:32:37)

Aperture does not support Pentax K 3 RAW format. Any advises?

Similar Messages

Maybe you are looking for