Aperture does not support the more expensive Lumix cameras from Panasonic!

Aperture does not support RAW in the GF!, G1 or GH! cameras - cameras hailed as breakthroughs. Does anyone know why or when it may do so?

I believe that you posted in the AirPort forum by mistake. It appears that you intended to post this in the Aperture forum.

Similar Messages

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

J2sdk1.4.2_12 does not support the 64 bit data model

Hi guys,
I need support for instalation NW2004R1 for windows x64bit.
in the step "define parameters" I need set JDK Directory, I setting C:\j2sdk1.4.2_12 and when click in botton next, I receive the message " The JDK installed in directory C:\j2sdk1.4.2_12 does not support the 64 bit data model. Choose a different JDK. "
I search documents but not found.
Anybody can help-me ???
thanks
Henrique Mattos.

Hi,
You can get more information related to your issue from
service.sap.com
https://sdlc2e.sun.com/ECom/EComActionServlet;jsessionid=606D9ABC1A37F8F6D7517A9B77ACA38B
Regards
Agasthuri Doss

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

AFP - Apple Filing Protocol
The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing. Time Machine needs some specific features that are not typically available on generic networked storage devices.
There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.

PC Suite does not support the connected phone........

Hi...
I have a big problem in the delivery of mobile and my type is N70 with Computer shows a message saying that some files missing from the mobile and this is the message that appears when connectivity.
PC Suite does not support the connected phone. PC Suite settings file is missing from the phone. Switch off your phone, switch it on, and try again.
Please assist in this matter, I can either send a site that I downloaded through by mobile phone.
thank you very much..
Moderator note: telephone number removed. It is not advised to publish personal contact information on a publically-accessible web forum.
Message Edited by michaels on 14-Feb-2008 08:40 PM

Hi Guys,
It always better to give more information when you are posting your issues....Please try to give your system info, versions of the pc suite you are facing the issue :-( so that it may help others to narrow down ur issues :-)

This app does not support the language of the OS adobe illustrator

this app does not support the language of the OS adobe illustrator
The system language is Russian, so fellow connoisseurs help someone is not difficult

What system? What version of AI? You need to be more specific.
Mylenium

Aperture does not support Pentax K 3 RAW format. Any advises?

I just bought a Pentax K - 3 camera. Aperture does not support RAW format. Does anyone else have the same problem? Is there going to be Digital Camera RAW Compatibility Update for Pentax K 3?
I would be very pleased if someone could give me some advise,
Heikki

Only Apple knows when and if a specific camera's Raw format will be supported and they never say before they release the update.
In the meantime there a few different ways to work around this. One is to shoot Raw & JPG and use the JPG now and the Raw if and when the camera is supported. The other is to convert to DNG.
In the meantime let Apple know you want support for the camera, Aperture->Provide Aperture Feedback. Don;t know how much good is does but it can;t hurt.
regards
The list of supported cameras is here http://support.apple.com/kb/HT5955
Message was edited by: Frank Caggiano

Acrobat XI does not support the conversion?

I have Acrobat XI when I take a batch of PDF files and try to combine them into one PDF file I keep getting this error message......
"Acrobat does not support the conversion of one or more of your files to PDF. Please remove these files or go to Settings and choose the PDF Portfolio option". I am making a electronic disk and the Portfolio option won't work for what I am doing. Does anyone know how to fix this? I have converted these files before and never had any problems with this. I have tried this on a new computer and now I get the error message. I attached a picture of the error.
I have Acrobat XI on a
Dell Optiplex 3020
Windows 7 Pro 64 bit

I just got done and went through every file and opened them to check the Document properties, then security tab, then security method and all of them say no security. Have any other ideas?

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Aperture does not support the more expensive Lumix cameras from Panasonic!

Similar Messages

Maybe you are looking for