Aperture error - The operation couldn't be completed. (OSStatus error -1.)

I'm getting an error quite frequently from Apeture. THe error looks like this - The operation couldn’t be completed. (OSStatus error -1.).
Any idea what this error is, why this is happening and how to fix it ?

Do you have Facebook enabled as an account in the "Web" preference tab in the Aperture preferences? This looks like a typical Facebook-problem to me, when Facebook cannot contact the server.
If yes, and you do not need to sync to Facebook, disable "Automatically check for published albums".
If yes, but you need to sync to Facebook, look in the Console window for additional diagnostics, that are appering at the same time as the error message, and check your network settings.
If none of the above applies, post back with any additional information on what you are doing, when the error message pops up.
Reards
Léonie

Similar Messages

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!

but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD

Software Update App Store 10.8.2 Error - The operation couldn't be completed (NSURLErrorDomain error -1100.)

When trying to run a software update in 10.8.2 from the App Store I recieve the error - The operation couldn't be completed (NSURLErrorDomain error -1100.)
Any help would be appreciated.
Thanks
Anthony

I found the answer by looking over towards the right on this page...to the More Like This section.
The answer is that this indicates a server overload with Apple's App Store server. Give it some time and try again.
Here's the link where this was discussed:
https://discussions.apple.com/message/19553195#19553195

The operation couldn't be completed, OSStatus error -1

After leaving the Aperture app open for a day I get the above mentioned dialog box message and I need to force quit it. Once I started clicking on "OK" and it took 98 clicks to get the dialog boxes to finally disapear. Usually I don't have that much time. Internet works fine and Facebook works fine. Aperture version 3.4.3
What's going on?

The OSStatus error -1 may indicate a network problem, even if your internet is working fine now. You may see these alert boxes, if Aperture cannot connect to Flickr or Facebook, when it awakes from sleep.
I'd disable the option "automatically check for newly published albums" in the "Web" preferences of Aperture.
This will prevent Aperture from trying to connect to Facebook, each time it wakes up.

HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc

Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"

Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
Within the System Preferences, Users and Groups - when we attempt to sign into the notebook using any AppleID - we receive the following error message:
Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
We have a Macbook Pro, MAC OS X Lion 10.7
This occurs whilst using any AppleID - we have tried two separate accounts.
I have created a new user profile, with administrator access, same fault occurs.
We can log in to iTunes on the notebook, the AppleID account registers and works OK.
No related articles with common Google search results.
I'm hoping to avoid a re install of the operating system if possible.
Many thanks,
Tim

Has anyone else possibly heard of this particular error? I'm really hoping to seek some support suggestions for this as it is occurring to one of our top line managers. Much appreciated.

PLEASE HELP i get error:The operation couldn't be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be dmg but how?

i get error:The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be .dmg file but how?

Student_245,
are you certain that you’ve completely downloaded the .pkg file — that the download didn’t end prematurely?

Receiving error: "The operation couldn't be completed. Permission denied."

When I startup Final Cut Pro X under 10.7.2 on a Mac Pro I'm receiving the error "The operation couldn't be completed. Permission denied." Then after I press "OK," FCPX finishes loading. I've searched the Community but haven't found an answer to why this is happening or how to fix this. Does anyone know?
I also have Final Cut Studio loaded on this machine.
Thanks very much.

I've seen this, and I'm sure it was something simple.
Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
Can't guarantee it, but it's worth a try.
Andy

I get this error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" when trying to latest mountain lion updates (for safari and RAW) on macbook pro running osx 10.8.2

I am trying to update the latest patches for safari and RAW, however I get the following error "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)" is anyone else having the same issues? I am currently running Mountain Lion 10.8.2

IDEM problem... grrrrrrrrrrrr
MacBook Pro OS X Mountain Lion 10.8.2 (12C60)
I have found this link...
http://9to5mac.com/2012/11/01/apple-updates-safari-6-0-2-iphoto-9-4-2-and-apertu re-3-4-2/

Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help

Try to remove the account in the Internet Accounts preference pane.

Time Machine and Iomega NAS - The operation couldn't be completed. Error 2

Hi - I sure hope someone is able to help?
I have just purchased an Iomega Storcenter IX2-200 4TB NAS device.
I have tried to use it as a TimeMachine device but when I select the TimeMachine disk from the preferences panel I receive the error 'The operation couldn’t be completed. (OSStatus error 2.)'
I have not created any users etc, the device is as it came out of the box. The TimeMachine disk automatically appeared in the Finder when I connected the IX2
Is there a 'special' userid/pw I should be using for the TimeMachine? When prompted for those details from the TM preferences I use admin/<password> and receive the above error - any other entry results in a message stating that the userid/password info is incorrect.
I don't want to return it because I see it as a useful device to back up my three Macs.
If anyone is able to help they will be my friend for life!!
Kind regards,
Dave.

The anwser is quite simple. Enter the Storcenter's configuration page en go to "settings", "Back up" and " Time Machine". When you configured the NAS correctly there is a + button roughly in the middle of the page.
Press this button and enter the name of the Mac and the ethernet/mac adress (this is the adress of the network adapter you use to connect to the network, something like aa.11.bb.22.cc.33, can be found on the advanced section of the networkadapter settings). Click "ok", log off and close the window. You can now configure time machine using the administrators name and password.
(sorry if the translation is a bit "foggy", I'm writing this with a Dutch version of the software...)
Jan

HT5568 I can't download this update. Am getting error: The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102). Any ideas?

When trying to download the update through Software update I'm getting the error: The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102).
when tring to access through the support/download section the download package can't be found.
any tips?
Many thanks.
Just saw in a different post a download link which is working. problem solved :-)
here the link
>http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

Download and install > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

The operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)

Good Morning,
I am running into an issue when trying to process an update in the appstore on my macbook pro. I get the following error after clicking on the "update" button:
the operation couldn't be completed (NSURLErrorDomain error -1012.)(-1012)
Any help would be greatly appreciated!

James6 I love you, this problem has been annoying the **** out of me for months!
Thanks! Just turned off Kaspersky and low and behold a multitude of updates available!
Brilliant, good work fella

HT1222 when i update iTunes 11.1.0 i got error "The operation couldn't be completed. (NSURLErrorDomain error -1102.)(102)"

when i update iTunes 11.1.0 i got error "The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102)"
Can anybody helps me pleaaaaaase

just keep clicking on download through the app store and try restarting it... this worked for me

I can no longer access Safari on my ipad. I get the error:the operation couldn't be completed. Cannot allocate memory. Help please!

I am not able to access Safari on my ipad. I get the error message: The operation couldn't be completed. Cannot allocate memory. Can anyone help please??

Try this first.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reboot the iPad - or quit all apps and restart.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.

Aperture error - The operation couldn't be completed. (OSStatus error -1.)

Similar Messages

Maybe you are looking for