Aperture Exported Slide Show Does not show last few photos

I exported an Aperture Slide show for an AppleTV (720P). The slide show has over 2000 photos from a recent trip. The slide show is about 115 minutes long.
Everything works fine until about the last few minutes, the music works fine but the screen goes black for about 7 photos, comes back on for 2-3 then goes black for the last 5 or so photos. Does anyone have any idea why the end of the exported slide show is doing this? If I watch the preview on my MAC everything looks fine all the way to the end.

In my case it was because my hard drive was nearly full. I emptied the trash (had not done this in quite sometime) and it freed up a lot of disk space. The full slide show compiled fine after this. I found this when another recompile warned me that there was not enough disk space to compile. Hopes this helps.

Similar Messages

Premiere Pro CS4 "Export Settings" window does not show up.

Hello,
I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
-Ben

Ben,
THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
Hitting ALT+Space,
Down Arrow,
Enter,
and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
Again, a BIG Thank You!!!
Tony Salso
[email protected]
Cedar City, UT 84720
Tony—Professional Digital Pictures
--Videographer and Webmaster
Red Hills Southern Baptist Church
Serving Jesus in Southern Utah
[email protected]
www.redhillssbc.org

My exported (shared) iMovie does not show up on my iPad iTunes . . .

I made a short little test movie on my iPad2 with iMovie (and iOS5).
I've sent the project to iTunes from with the iMovie program . . . watched the progress bar and received the following confirming message, "Your project will appear in the file sharing section of iTunes as: My Project"
Can't find it -- anywhere -- no matter what I do.
I'm obviously doing something wrong but have no clue what?
The video doesn't show in iTunes or in Videos from the main screen or anywhere else.
Can anyone point me in the right direction?
Thanks.

if it is NTFS then you need Paragon Software NTFS for Mac.
NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
If it is not NTFS then you need more details. Need more anyway.
PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

Scrubbing playhead does not show slide effects

In the Timeline and Effects windows, scrubbing the playhead or pressing the play button or the space bar does move the playhead, but the slide above does not show the effects I designated to its elements. Can you please help me with this issue? I am using a Powerbook with OS 10.9.5. Thanks.

Effects will only show when doing a real preview, not Play slide which is not a real preview; and that is what you get when scrubbing as well. In the effects panel you can use Live Preview button to
see effect.

Need help Aperture 3 does not show thumbnails

Hello, after installing the Aperture 3, I found does not show thumbnails, tried to do everything he could, but nothing helped. Can anyone encountered this problem?

I've been having what seems to be permission related problems with previews. When you see no thumbnails, highlight all the images, right click on them and "delete previews", then "rebuild previews".
See if that fixes it.

Both my Apple TV as well as my iTunes does not show the option "TV Shows". How can I add this basic feature?, Both my Apple TV as well as my iTunes does not show the option "TV Shows". How can I add this basic feature?

Guys, when opening up Apple TV as well as my iTunes, the option for "TV Shows" does not show up.
Any help appreciated.

Welcome to the Apple Community.
Are you in a location that has TV shows.

Round trip to PS CS3 does not show the saved image in Aperture 2.1.1

Good evening everyone; I hope someone can help me to solve this.
I have PS CS3 set as my external photo processing app (exports are PSD 16-bit 300 dpi) in Aperture 2.1.1. When I process the picture in CS3 and then save it(mind you I only SAVE, I do not do SAVE AS) as PSD (or TIFF) Aperture only shows me the original file in preview with the little circle informing me about the round trip to CS3. So the processed file does not show. Instead I only see two identical versions of the same photo.( I mean, I see the master and the version with the little circle).
If I save the work in PS CS3 as jpeg and then import into Aperture, it shows fine. When trying to import the processed and saved PSD and TIFF files, Aperture only shows the original file.
If it helps, I am working on layered pictures (HDR) where I use different parts of different pictures to get wide dynamic range. I export 3 or so photos from Aperture at once to CS3, process them into one, flatten the picture and save it.
And then Aperture just shows me the original file as version.
I have done this before 2.1.1 and it worked. Not sure if I have changed anything that might be causing this.
Thank you for your ideas.

I am sure it is not stacked under the original, unfortunately. Any other tips?
Also, as I mentioned earlier, even if I save the processed file in CS3 as PSD (so I use SAVE AS) and then try to import it into Aperture, it "magically" only shows the orginal (as if it was just importing some layer).

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

The sequence does not show when exporting media from premiere

hi
i have the following setting for my sequence-
editing mode- main concept bluray
time base-25.00
preview file format -mpeg bd 1080 50i vbr 34 mbps
width 1920
height- 1080
maximum render quality
issue is when i export media the adobe media encoder does not show the sequence
and when i export in some other format- it only shows h.264 option and not h.264 bluray. as a consequence cannot write any bluray since all the option are progressive
do i need to reinstall something/anything
issue with mainconcept?
is there a tab where one can add presets in media encoder?
thanks

If you installed AME through the Creative Cloud, then this is a known issue which was fixed in an update released just a couple of days ago. To get this update, select Updates in the Help menu.
If you're not on Creative Cloud, then please specify which product or suite you installed that included AME, and also indicate whether it's activated or running in trial mode.

I set up a location based reminder in notification last week to test it out. Worked great, but now I cannot get rid of it. It does not show up in any list on the notifications pages, but can be found in search. How can I get rid of this notification?

Last week I set up a location based reminder in notifications to test it out. Worked great. However, I can't get rid of it. It does not show up on any of the pages, either reminders or completed. I can search and find it, shows it should be in reminders page, but it is not there for me to remove. Any ideas?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Exporting pdf does NOT show my headers and footers

I export number files to my administrators. I've noticed when I print my file directly from my computer in iWork/Numbers it prints and show the footer and header. However, when I send a bcc to myself when I attach the pdf file to my administrator, it does not show or print my headers and footers. Any ideas?

Re-reading the original question, it does appear that Gogoette is exporting to PDF then attaching the file to an email versus using the "Send via email as PDf" operation. In that case, setting it to Page View for the export will solve the problem. I had originally thought "Send via email as PDF" was being used. What I noticed is that it doesn't give you the choice of page versus sheet view but if you first go through the motions of exporting, it sets it up. In prior threads about exporting to PDF, we have all recommended using Print, not export, and choosing Print to PDF (rather than to a printer) as the best way to create a PDF. It gives more flexibility, such as allowing you to choose which pages to "print to PDF".

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

HT4352 appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped

Aperture Exported Slide Show Does not show last few photos

Similar Messages

Maybe you are looking for