Aperture exports most images fine but some have less color.

This started very recently. If I choose a batch of images to export, most of them export fine but some of them have a lot less color. Its very obvious it wasnt exported correctly. Then I just export that single image after the batch is done and it exports fine by itself. Tried deleting Aperture and reinstalling, deleting the user preferences, deleting presets and whatnot, repair permissions, repair database, and rebuild database. None of those have helped.
2 X 2.4GHz Quad Core, 20GB RAM, AMD Radeon HD 7950.

I usually have always done JPEG Original Size but the quality at 11. I just tried all sorts of JPEG exports and the same thing happens for everything I tried. Same for PNG. BUT, if I export as a TIFF, there is no issue on original size 16-bit, but on anything else the issue comes back. If I export the originals, it exports the uncorrected RAW files and they are fine too. Im goint to attach an example image that is messed up, and also a correct one so yall can see how off it is.

Similar Messages

I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives. I've double checked email address. Anyone have a solution?

I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives. I've double checked email address. Anyone have a solution?

This has been reported numerous times in the past. It seesms that from time-to-time the response system responsible for sending the key goes away.
Take a look at the More Like This box on the right hand side of this page. Some users have had success getting the key sent in various ways.

I have an external HD with mostly mp3 music, but some important docs I need to keep, I want to buy a mac desktop, will I be able to use my HD on the mac?

I have an external HD with mostly mp3 music, but some important docs I need to keep, I want to buy a mac desktop, will I be able to use my HD on the mac

Yes, though if the drive is formatted as NTFS, Mac OS X will not be able to write to the drive without you either installing third-party NTFS drivers or reformatting the drive.
Regards.

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod speaker even though the buds are properly connected.

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod and iPhone speaker even though the buds are properly connected. Does anyone know why and is there a solution?

Assuming you are using Bluetooth headphones, do the apps have the option to use Bluetooth?
The app should have an option to select the speaker (or wired earphones) or the Bluetooth headphones.
You can also try:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

I have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

i have transferred my pictures from a PC to iPhoto but some have remained in a pictures folder. How can I move them to pictures?

what is WP files?
You want to always use iPhoto with a default referenced library (the preference to copy imported item to the iPhoto library is checked) ad then delete the source photos
LN

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I just got new ipad mini....I want to delete all of the music that was synced from my itunes account. I have went through and deleted some songs one by one but some have a cloud icon with a red arrow on them.....is there a simple way just to delete them?

I just got new ipad mini....I want to delete all of the music that was synced from my itunes account. I have went through and deleted some songs one by one but some have a cloud icon with a red arrow on them.....is there a simple way just to delete them?

Yes there is. Those songs are not actually on your iPad. They are in iCloud ready for download if you choose to do so. If you want to remove them go to Settings>iTunes & App Store>Show All>Music>Off. You can also do this in Settings>Music>Show All Music>Off.

TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
Been to my parents with the i pad and this will connect to their wireless router.
Can not think of anything else to try

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Aperture gets "Unsupported Image Format" on some JPG images

I'm using Aperture 1.5.2 "trial" on PB 15" with OSX 10.4.9. I am getting "Unsupported Image Format" on about half of the 15,000 JPG images that I have on my HDD. But not all of them - even though all images come originally from my D100 camera and are JPEG images. These are all JPEG images with extensions JPG, jpg and jpeg. No RAW or TIFF.
My images are currently catalogued in iVew MediaPro [IVMP] and I'm interested in switching to Aperture. So I've gotta find a way to import those photos.
Here's a clue: When I put the CF card from my camera into the computer yesterday and tried to add the images to Aperture it reported that all the images on the CF chip were "Unsupported Image Format." I was not copying the images - just leaving them im place. As a test, I then used IVMP to import from the CF card onto the HDD, into a directory. Afterward, I fired up Aperture and it could properly index and display the files. I noticed that the pre-existing images that are viewable in Aperture all have previews when viewed in the Finder. Also, they've all been imported from CF to HDD using IVMP, so there may be some processing going on there. I also tried reading files into Photoshop and rewriting them with previews, which I verified in the Finder, and those files also can not be viewed in Aperture. So it is not just a question of having a preview - it's something else about the files.
Another clue - when I shoot more than one CF of photos in a day, I use IVMP to import the first CF batch, and those are always visible in Aperture - but IVMP doesn't let you import two batches on the same date (pretty goofy huh?) - so to import an additional batch I have to (Finder drag-drop) copy from the CF to the HDD into a directory - and those files have no previews, have not been imported thru IVMP, and interestingly are not viewable in Aperture.
So I'd have to conclude that iView MediaPro is doing something to "tame" the files' format that makes them acceptable to Aperture. But I want to dump IVMP, so there has to be some other way to make these D100 files acceptable to Aperture.
I either need to "fool" Aperture into reading the files or find a way to tweak 'em and make 'em acceptable to Aperture. Any ideas from other iView/Aperture users out there?
PB 15" Mac OS X (10.4.9)

Good idea, but I checked it... I mentioned reading right from the card in order to illustrate that the JPG files are "unsupported image format" even *right from the camera*. *In fact* the CF is not the differentiating factor between renderable and non-renderable. The real factor is whether the files went thru iView Media Pro or not. Files that were drag-dropped from the CF into a folder are not renderable by Aperture and files that were imported first (from the CF or from another folder) thru IVMP into a folder are renderable.
Yesterday I confirmed again that GraphicConverterX does not fix the files if I import and then rewrite with additional options turned on. It also sees the same IPTC data and EXIF on both a "good" file and a "bad" file. Identical. I also fixed the OS9 creator and filetypes so they're <none> and that didn't fix anything - some good files and some bad files have this configuration.
Ah another COOL THING - I just loaded a CF card into the computer and brought up Aperture - it immediately recognized the card and showed me two previews - one for a NEF (Nikon RAW) and one for a JPG. The previews looked fine. I clicked to have it import the photos. Once imported, the NEF looked OK, but the JPG had a grey preview and then "Unsupported Image Format" on the large version. I think this confirms the file format is a problem, but then why was Aperture able to gen a preview when the file was on the CF chip but not after it was copied to the HDD?
I double-checked this by copying in Finder drag-drop from the CF card to the HDD and then importing the same two photos (NEF and JPG) from the HDD, and indeed the NEF was renderable and the JPG was not. For me this confirms that there's something about the file format that Aperture can't deal with.
I then imported the same two files using IVMP (Media Pro) and as expected, both files could then be "imported" and rendered by Aperture. So IVMP is doing something that makes Aperture really happy.
In case someone can actually compare the two files - I have put up a "bad" and a "good" JPG - it's the same image from a Nikon D100, but one of them (bad) is right from the camera and the other (good) was imported by IVMP and somehow is acceptable to Aperture. Any intelligence that anyone can add based on these files would be useful.
http://fire.red7.com/aperture-tests/DSC_0070-good.JPG
http://fire.red7.com/aperture-tests/DSC_0070-bad.JPG
PB G4 15" Mac OS X (10.4.9)

MacBook Pro scans images fine, but only saves as gray page with banding

I purchased a new MacBook Pro recently. I used my HP Deskjet F4580 to scan with my old MacBook and it worked fine. Now when I scan the image it appears fine on my screen, but when I go to save, there is no trace of the image, just a full gray page with some banding. I tried another printer/scanner: HP Officejet 7310 and I got the same results. I have tried saving as a pdf, jpeg, png. I read other ways to operate the scanner with a Mac, still no success. I would appreciate any help. Thank you.

Hi Julie,
In order to help you better. Would you let me know which application/Service of Adobe you are using?
And what are you steps to scan the file and save it. And if you are using any Non-Adobe application to scan the documents are you able to save them perfectly?
Regards,
Ajlan Huda.

Growing image fine, but shrinking image loses quality???

I am new to vector, but what I know is that it is suppose to look the same whether 30x30 o
r 3000x3000...
Several times now I have created an image at about 500x500 and then wanted to use this image in a document.
Well when I put the image into the doc and shrink it significantly, lets say to 75x75, it is nothing like it should be anymore.
Some objects lose their effects (scribble for example loses line marks) and others just lose their porportion.
Am I missing something?
Should I be working with small images and grow them to my needs instead?

Nice! Thanks
It wasnt checked... Lets hope that was it.
I save as .AI

Internet works fine but some applications won't work (wrt54g2)

So my connection works just fine with most applications and browsing, but when I try logging into a ventrilo server I'll just get stuck on synchronizing.
When playing Heroes of Newerth too, for an instance, I'm not able to connect to any games or download the game list.
I've opened all related ports and also set my computer up as DMZ to see if that was the problem, still didn't work.
The router is WRT54G2 updated to the newest firmware.
I also have a D-LINK router and both ventrilo and heroes of newerth work just fine on that router.
Any ideas?

Who is your ISP....?
Are you able to login in the ventrilo server when connected directly to the modem...?
As you have upgraded the router's firmware,I would suggest you to reset the router for 35 seconds,power cycle the router and re-configure it from scratch...Now,try to open the required ports on the router and check.

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine, but I have another machine with just "Reader" installed - is there als

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?

The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
So, yes, you need to buy Acrobat. Standard is cheaper than Pro.

From nt to 2000: vis work but some have error: in device 52 on flex_read_adc

we just moved an application from windows nt to windows 2000. we use a pci-flexmotion 6c and the 5.1.1 driver with a patch. the application is generally working, but with some vis there comes the error-box: "in device 52 on flex_read_adc".
Attachments:
Fehler_PM13_1.jpg ‏149 KB

From the appearance of that error dialog it doesn't seem to belong to any error generated by the FlexMotion driver. It looks a lot more like a user defined error dialog that might have been made by whoever coded your application. I would ask them, or , if you prefer, you could send us your code by contacting an applications engineer at 1-866-ASK-MYNI or posting it here. We will gladly ty to reproduce the problem and let you know where the error is coming from.

Aperture exports most images fine but some have less color.

Similar Messages

Maybe you are looking for