Aperture Facebook Connection Issues

So I just installed Aperture 3 and want to connect to Facebook but cannot or do not know how to. Please help! I also installed the plug-in but do not seem to be able to even know how or where to access or use that either. I have been reading and searching everywhere but cannot find the answer. If it is my first time using Aperture how do I connect to my Facebook account is basically what I am asking. Thank you!

Ok...so I had to import at least one image into Aperture for the Facebook icon above to not be greyed out. Lets see what happens now! :O

Similar Messages

Facebook connection issue

Hello,
I have a problem with the Facebook application. Since yesterday, my application has not been able to refresh my news. I have the following message on my screen : "There was a problem connecting to Facebook. Please check your connection and try again. " My connection is working because I use the WIFI and the 3G, I can use the Internet.
Also, I don't always receive the notifications from the Hub when one of my events is updated.
Who can help me?

Hello,
I am confused...what device are you using? You have, in your forum profile, a "Bold 9700" listed. But, in your post, you mention "the Hub", which is a BB10 feature. So, please clarify your exact device.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP PhotoSmart 7510 suddenly has severe connectivity issues

I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!

I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not.

Facebook connection error in Bridge CS6 - Windows 8.1

Good evening all!
I have an HP Pavillion Laptop with and i5 and 12gigs RAM running Windows 8.1
CS6 Master Collection
Action:
Bridge / Export to Facebook
From export panel select Facebook module.
Select add present
Select "Sign Into Facebook
Error:"An error occurred when request Facebook Connection"
I read in another forum that others were having this problem too but no solution and that post was from a year ago. I am hoping that this has be solved and one of you good folks knows how.
Thank you for your attention

CCSDSoftware wrote:
We did not experience these issues at all on Windows 7.
Thoughts?
I'm trying my best here, but you are making it really difficult...

The Game Center is "unable to load data due to network connectivity issues or errors".

The Game Center is "unable to load data due to network connectivity issues or errors".
My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

PC has Connectivity issue, I am going to tell every one about poor performing HP notebook PC

PC does not connect well; all my devices do except for pc. The worst I ever experienced; I always thought good of HP. Very disappointed with HP, as this is a known connectivity issue. I had for 3 mon. previously called & was rushed a box to ship for repair, but not that is not enough. I bought pc for wrk and I cannot be without. I am very frustarted, because the connectivity issue such a nuisance & inconvenience. I am considering contacting BBB, Attorney General , Facebook. HP should do bttr. I expected more from a big, so called reputable manufacturer. I should not have to be without a pc. I bought it to make a living. This is rediculous. I understand mstakes happen, but be accoutable, as I only want a fair resolution.
Frustrated Customer.

Hi Rachel
Sorry to hear your having connection issues with your machine , Can you tell me exactly what the problem is and any ( If any ) error messages you receive regarding your connection issue.
Kind Regards
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Connectivity issues after 8.1.1 update please help! :(

Hi all. Here's the situation.
I got my Iphone 6 on release day.
Not had one single problem with it.
On Monday however I do a general software update to IOS 8.1.1
Now ever since then I cannot keep a steady connection to both WIFI AND my roaming internet.
BOTH show as connected however load EXTREMELY slowly or not at all. No matter where I am.
I have done a soft reset.
Switching on and off.
And resetting Network Settings.
Done all these 3 or 4 times and they are not helping.
It is too coincidental to not be because of the software update.
Can someone please help me?

Still no help for you? I updated my iPhone 6 to 8.1.1 this past weekend and now have huge connectivity issues too. My home WiFi signal is 5 bars but runs very slow for example Facebook, the phone cannot update messages or photos. Try to connect for online banking, forget it. I have turned off WIFI and try using my Verizon signal which is 3 out if 5 bars, same problem. Don't understand why Apple cannot fix this apparent bug. Will call Apple Care in a few minutes and let you know what they say.

NetTv Connection Issues.

Hi, I don't often use the NetTv or other Smart Tv apps connected to my TV, so it's been a couple of months but when my nephew was over last week and tried to use the Youtube and Facebook apps, nothing worked for him. When the NetTv app is clicked on my remote, the TV picture gets smaller like it used to when the apps would appear but now nothing happens, no apps, the picture just goes back to the way it was before.When I click on the Yahoo widgets or Facebook widget, the spinning loading symbol appears but then nothing happens, nothing ever loads up.The network connection is listed as being both connected and strong. Is there something I'm overlooking? I really can't figure out what the problem is, I'd really appreciate any suggestions.Thanks

I have model 47TL515U and I have been unable to connect to NetTv or the widgets menu. I have unplugged the tv, reset the tv, upgraded my router and all I get is a blank screen whenever I select these options. I am able to load and watch Netflix. I tried calling tech support but was advised I needed to pay a fee for 14 days of tech support for one issue. They did confirm I have the latest software upgrade. Any suggestions on what else I can do. This problem started a few months ago but I thought it was an internet connection issue....

Connection doctor and connection issues

I have nothing blocking my internet connection, however mail is a nightmare for me. I continually receive connection issues via the connection doctor for imaps, pops, and icloud.
Are my settings wrong? I have checked with each of the settings and they are set per instructions provided. Some are google, some yahoo, icloud, etc.
This is really annoying and I could really use some help.
Here is a typical message: Could not connect to this Google IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the 'Use SSL" checkbox in the Advanced tab of Account Preference"
I have done all of this and am still having troubles.
I am also receiving SMTP connection issues - "Trying to log into this SMTP account failed. Verufy that the username and password are correct."
I have checked and all are correct. Even more confusing, these issues are not present all the time - however I have not changed anything between when times are good and bad.
Sigh - I hope someone has an idea to help me out.
Thanks in advance for your time and thoughts.
Patti
I am running osx 10.8 mail 6.2 and use xfinity for my internet (as I mentioned, I disabled their firewall trying to fix this)

Hi there Japps1,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
-Griff W.

Excel ODBC Connection Issues

I'm having some issues importing external data from an Oracle 9i database.
Here is what is happening:
I am initially able to import data from the table I want to into Excel.
I do this through "Data -> Import External Data -> New Database Query" where I have my .ORA data source. I'm able to log in using my user and password and import the table. My problems come after I import this first set of data.
If I try to "Edit Query…" I get an error box that says "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
If I try to "Refresh Data" I get two error boxes. The first is just: "[Microsoft][ODBC driver for Oracle][Oracle]" and the next says: "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". It then prompts me for the User name and password of the DB I'm connecting and after I enter the information, I get the same two error messages.
Also, if I attempt to establish another connection following the "Data -> Import External Data…" steps I run into a different problem. Upon entering the information for the User Name and password prompt I get two error messages. One says "!" and the next box says "Couldn't read this file". Once I click "OK" in those boxes, the Microsoft Query window automatically opens with nothing in it.
I can't seem to figure out why I can initially pull down data and then cannot succeed afterwards. I'm unable to connect to the DB I have through Excel until I completely closed all Microsoft Excel instances.
I also use this data source in Microsoft Access without any problems.
My Excel version is 2003.
I'm using Oracle Drivers I'm using are from an "Instant Client" package.
Any thoughts why I'm having these connections issues?
Thanks in advance.

This issue is closed.
The solution was:
"Data -> Import External Data -> Import Data"
Select "New Source" and select the "Oracle" data source and filled in the appropriate information. This was similar to the database query but it actually works.

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

Connection issues with Safari 3

I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.

There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard.

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

X1 Carbon (20AX series) wifi connectivity issues

Dear Lenovo Support and all others,
I am posting this in hope that someone can help with my problem and also to share my unpleasant experience with a new Lenovo product.
Lenovo Thinkpad X1 Carbon
Model: 20A8A00VSG
OS: Windows 7 Pro 64bit
Purchase date: 27th February 2014
Since the first day I purchased the system, I have been having an issue with my wireless connection:
1. I am unable to reliably get a wireless connection to wireless access points (e.g. free wifi coffee outlets or malls) and personal mobile hotspots (mobile phone hotspots). It constantly says "LIMITED CONNECTIVITY". In other words, I cannot get internet access. Even when it does connect to the network and get internet access, there is a tendency for the connection to drop back to "LIMITED CONNECTIVITY".
The only time I can get a reliable connection is when I am connected to my home wireless router. The system does not seem to have problems on home wifi networks. Since the problem seems limited to wireless access points and hotspots, I believe its a hardware/software problem.
Please note that I have other wireless devices (laptops and mobile phones) that can connect to the same networks that I am trying to connect to and have no issues.
I have tested the networks with my friends' wireless devices as well and they have no issues accessing the internet so I am fairly certain that there is no issue with the networks themselves.
2. I have already called in twice and been given advice on both occasions but the problem still persist. I have updated all drivers, uninstalled and reinstalled and updated the BIOS for the system and also performed a system recovery but nothing has worked so far.
I have also tried disabling and/or deleting any anti-virus software and firewalls but it does not fix the problem.
I have also been advised that I need to go down to the Lenovo service center to have my laptop checked out by the technicians and that there MIGHT be a firmware upgrade for the wireless card itself.
NOTE: MIGHT? The support staff doesn't even know for sure whether there is an upgrade available.
3. Rebooting my computer, the wireless card or the hotspots does not solve the problem. It might work for a shortwhile before it reverts back to it's non working state or stops working again once I reboot the system.
I am really unhappy with the purchase so far. It's actually a good laptop per se when all is working, but without internet access, it is pretty much like a dead fish. And thats 90% of the time.
Like I said, this problem has been happening since day one and I've tolerated it long enough.
I hope someone can help me with this problem.
Thanks all.
UPDATE - 3/24/2014
I borrowed an ASUS Wireless USB adapter from a friend and installed it on the laptop. Lo and behold there are no connectivity issues to my iPhone wireless hotspot.
INTEL DUAL BAND WIRELESS AC 7260 - NO CONNECTION/LIMITED ACCESS
ASUS USB N10 WIRELESS ADAPTOR - CONNECTIVITY AND INTERNET ACCESS
I think this narrows it down to the software/hardware in the computer....

Hi, all
there is an issue bugged driver or even card firmware related. Intel confirmed that. Wait some time for the new release.
For the test purpose only disable 2,4 ghz band support and switch to 5 ghz. N-band seems unstable so switch to G-band. As the Linux users report the same issue it's firmware bug basically.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

Aperture Facebook Connection Issues

Similar Messages

Maybe you are looking for