Aperture fails to import images from an iPhone

Since I upgraded to Aperture 2.1.4 aperture has stopped being able to import from my iPhone.
I get shown 3 empty frames ie pictures with nothing in them. Importing results in a message "Import from Capture Card Completed with Errors"
In console I see 7/09/09 9:39:52 AM Aperture[19686] NSScanner: nil string argument
Deleting all photos from the phone and still the same problem persists. That is Aperture still shows 3 blank frames and results in the same error.
Other cards are fine.
Other programs like PhoneView can see all of the pictures on the iPhone and can download them.
There must be some magic that can resolve the problem but so far I have failed to find it.

same problem here. Aperture not recognizing iPhone 3GS photo.

Similar Messages

  • Imported images from my iPhone became corrupted after importing.

    I Imported images from my iPhone and they became corrupted after importing. They appeared fine just after import, so I unfortunately erased my phone. When I reopened the aperture project where they were stored they had streaks, some were only partially visible, and others had no image just an exclaimation point with the words "incompatible file". thanks in advance for any suggestions or help.

    What you describe are very typical symptoms: You import; the images look to be o.k.; you go ahead and delete them. The problem is that during the import you only see the previews created by your camera, not the actual images you are importing. When you afterwards try to edit or to enlarge the images Aperture will recreate its own, better previews and needs to access the original master image files. If Aperture cannot find the master image files or cannot open them, you may see warnings (unsupported) or corrupted thumbnails. Only then you will notice if the images have been imported correctly, and that may be too late, if you deleted the images from your camera.
    How did you import? Are the imported master image files managed or referenced, i.e. included in the Aperture Library or referenced outside?
    I'd suggest you look directly at the master image files to check if they are o.k. and can be read by other applications.
    If your master image files are managed you'll find the images in the Aperture Library by right-clicking the Aperture Library package and selecting "Show Package Contents". Then Browse the folder "Masters". The master image files are stored in subfolders organized by the date of the import session.
    If your master image files are referenced, open the folder where you told Aperture to move them to.
    Check for two things:
    Have all your images really been imported?
    What is the  format and the state of the images? Try to open the images with Preview, or any other image editor you have and check if they really are corrupted, or if only Aperture has a problem to access them.
    If all your images are there, but Aperture cannot access them, your Aperture library may need fixing.
    Back up your Aperture library (just a precaution) and use the Aperture Library First Aid Tools to repair the permissions or/and to repair the database; see this section of the Aperture 3 User Manual on how to do that: Repairing and Rebuilding Your Aperture Library
    If repairing and rebuilding did not help, but you found the original masters and can read them, then copy them to a location outside Aperture and try to convert them to another file format with Preview or another application that can read them. Then try again to import those files to Aperture.
    Post back, if you have more questions.
    Good Luck
    Léonie

  • Aperture fails to import albums from iPhoto

    I have been using the combination iPhoto/Photoshop for many years. For some time I have considered either Aperture of Lightroom. With the chopped price and supposedly improved interface with the new version, I decided to buy it today. So far it looks like a big mistake! One major reason for choosing Aperture rather than Lightroom was Apertures's advertised smooth import of the iPhoto library, and to import albums in iPhoto. I have spent a lot of time over several years to find a good system of album organization in iPhoto. It was consequently a big disappointment to discover that Aperture failed to import most of my some 30 albums and my slideshows from iPhoto. I have searched both the manual and help to find out how I can get my album organization of some 20 000 pictures into Aperture, but so far without success. Can anyone give me a clue. Both regular albums as well as smart albums are missing. I cannot figure out how I so totally have misunderstood what Aperture is capable of.

    There is always local issues involved. No two Macs are alike. Different files, temporary files, plug-ins etc. can and do cause problems. When software updates and upgrades are created, the developer, in this case Apple, need to test the software in different environments. Developers are pushed by steadily shorter deadlines, at the same time applications are also steadily becoming more complex. When I am critical to Apple, it is because there are only Apple applications involved in my case, on a brand new (2 weeks old newest version of MacBook Pro), and the very same issue has happened to too many others. Just take a look at Apple discussions. I have used iPhoto since it was launched the first time, and I have only experienced problems a couple of times before. I am not saying that the problem is iPhoto or Aperture alone, it is the two of them which do not handle the integration. Keep in mind also that most Aperture users are different than the average Mac user in that they work a lot with photo files. This is the environment that Apple has to take into account when launching upgrades and updates.

  • Aperture fails to load images from CF card, now not able to open

    I have a new Canon 5D Mark III camera and was sold a  Lexar SD Professional 32 GB card and a Lexar Professional UDMA 7 Compact Flash 32 GB card.  Downloading the images from the camera is a problem.  I am using  a Mac Book Pro 15" with operating system OSX 10.6.8.   Aperture is on a Lacie external hard drive and now fails to open.  Yesterday, a message saying 'unreadable files' would show and a few images would be saved to Aperture.  Also, later, an 'unrecognizable format' message would appear. Before it stopped working, it would download one or two selected images but not a large number of images.
    Any solutions?  Any comments would be appreciated.  Thank you!

    Thanks Ernie!  The images would not load from the camera with the USB camera supplied cable.  Yes, the MBP has slot for the SD card and it downloads the images. 
    The Aperture library is on the LaCie external HD.  Don't know if the drive is formatted as OS X extended.
    After posting the entry, I went to the local Staples store and purchased a Verbatium card reader and lo and behold, the world is fine.  The Aperture has returned and I was able to download all the CF card images.  The card reader would not read the SD card despite having it listed as one of the cards it's able to read.  Don't know what's happening here but at least I can use the MBP slot.
    To me, it's strange!  It was all looking quite grim!  Thank you for your assistance!

  • Aperture: Will not import images from a device connected to my macbook pro USB port

    so i've scanned and scanned many iscussions and came up with no answers to my problem and i know there must be a simple solution. why can't i sync my photos anymore and why are some of my previews missing? from my iphone even though they are ON my iphone just not in the previews? what am i missing?? is there help out there in the ether world??
    thanks

    Need more info :-) .  What problem are you trying to solve?  In what way is the behavior of Aperture different from what you expct?
    "Preview" means something specific in Aperture.  Is that what you mean?
    What photos are you trying to sync?
    You mention "import" in your subject but not in your message.  It is not possilble to provide good advice without knowing what you are asking.
    Ask for clarification if you don't know what "Previews" are, or what "import" means.  Don't worry about asking -- Aperture is a very complex and difficult program.
    (Sent from my magic glass.)

  • Imported images from iphone are unsupported in aperture?

    When I try to import images from my iphone into aperture, they come in as gray boxes. When I click on these I get a message that the file format is unsupported. Anyone else running into this?!

    Also, I tried image capture and tried to open the jpg's in preview. This also didn't work and said the format is unsupported. Photoshop gives the following message:
    Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).

  • How to import images from iPhone 5 into Lightroom 4?

    After a recent iTunes software update, I can't import images from my iPhone 5 into Lightroom 4.  Now Lightroom doesn't even recognize that the iPhone is connected, nor does the Finder, which explains why I can't choose it as an import source.  Instead the iPhone only shows up in iTunes when connected.  Surely someone else has run into this issue.  Any known solutions/suggestions/work-arounds?

    http://lmgtfy.com/?q=how+to+import+videos+from+iphone

  • Trouble importing images from Canon EOS to iPhoto

    When I returned from my daughter's wedding with about 400 irreplacable photos I discovered that I could not import photos from my Canon EOS to iPhoto on my iMac.  When I initially connect my camera to the computer the images display perfectly. However, when I click "import all" the downloaded images all appear completely blank (gray).  I don't have any difficulty importing images from my iPhone.

    I have had a similar experience with a few greyed out images I did not bother too much because it was not important at the time. I was wondering if you could save them into another format or file and then try importing them from there.

  • I can't import photos from my iPhone

    Okay:  I have Lion, I have iOS 5.  I have the latest version of iPhoto.  However, When I open iPhoto and have my phone unlocked, I am no longer automatically presented with images from my camera roll ready for import.  Nothing happens.
    How can I get my mac to see my iphone so that I can import images from my iphone?
    Any suggestions?
    Thanks

    Hi Daniel!
    I have an article here that can help explain how to do this through a couple of methods on your new MacBook Pro:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Specifically, these are the instructions relevant to your situation:
    If you have a Mac
    You can import pictures from your iOS device using iPhoto (if installed):
    Connect the device to your computer. iPhoto should automatically launch into its import window with your device's images and videos listed.
    Note: If iPhoto does not automatically open, you may wish to enable the behavior.
    Click Import All. If you want only some of your images imported, select the images and videos you would like to import into iPhoto, then click the Import Selected button.
    When the photos finish importing, you will be presented with a dialog asking whether you'd like to delete the original photos from your Camera Roll. Click Delete Photos.
    Note: Deleting photos after importing helps to reduce Camera Roll size, and it improves backup and restore times. You may choose Keep Photos if you wish to import the photos to additional computers.
    If you do not have iPhoto installed on your computer, you can import pictures from the device using Image Capture:
    Connect the iOS device to the computer.
    If Image Capture does not open automatically, you can navigate to your Applications folder and open Image Capture from there.
    Choose the location to which you'd like to import pictures.
    Click Options.
    Click the Options tab if it isn't already selected.
    Enable the option "Delete items from camera after downloading".
    Note: Deleting photos after importing helps to reduce Camera Roll size, and it improves backup and restore times. You may choose Keep Photos if you wish to import the photos to additional computers.
    Click OK.
    Click Download All.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Aperture failed to import from Image Capture

    Is there any way to rescue all the images (I deleted before finding out )that failed to import (for who knows what reason!) into Aperture from Image Capture (off my iPhone)?

    I'd appreciate an answer to this also as I frequently receive an "Aperture failed to import" message unless I directly import images from my camera (i.e., I can't use a card reader or import images saved to an import folder).

  • Aperture isn't importing videos from iPhone, only photos. I've tried plugged in and over wifi. Help?

    Aperture isn't importing videos from iPhone, only photos. I've tried plugged in and over wifi. Help?

    How did you transfer the photos from your other iPhone? If you did it by importing them from the old phone to a computer and then used iTunes to sync them back to the new phone, then you would delete them by syncing again using iTunes but this time change the selection of which photos are to be synced. Each time you sync using iTunes, it sets the non-Camera Roll photos on the phone to match the current settings/selection in iTunes.

  • HT204022 Dear sir/madam,  I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.  Thank you  

    I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.
    Thank you  

    Use the backup you make to iCloud or a computer.
    iTunes: About iOS backups - http://support.apple.com/kb/HT4946

  • When importing photos from my iPhone black boxes appear in place of random photos in the library and in Photostream.

    When importing photos from my iPhone black boxes appear in place of random photos in the iPhoto library and in Photostream. It has no apparent pattern, the photos are just blank. It's not just icons, when I go to edit the photos externally in Photoshop it opens an image filled with nothing but black.
    This is more than annoying. It's effectively deleting photos I'm taking on vacation and so forth.
    Anyone?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • Cant import photos from my iphone 4 to iphoto (8.1.2)

    i can no longer import photos from my iphone 4 to iphoto (8.1.2). it freezes on "preparing to import" each time. Any suggestions?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Recently i lost my laptop, how i want to upload all image from my iphone back to my new laptop?

    recently i lost my laptop, how i want to upload all image from my iphone back to my new laptop?

    importing pics from iphone to computer http://support.apple.com/kb/HT4083

Maybe you are looking for

  • Power Mac G5 dual 2.0ghz (late june 2004) - trouble upgrading video card

    Hi, I'd really appreciate any help. I have a PowerPC G5 Tower, dual 2.0 GHz, DVI/AGP version (June 2004 model) with 8gb ram. I recently got the Apple 30" monitor and wanted to run it along side my 20" apple monitor, so I bought the ATI Radeon 9650 du

  • EDI IDOC error message

    Dear Team, may I kindly ask you to help me with regard to an error message I am getting for inbound idoc message type INVOIC. The message is "Field format is incorrect" and 'Field content is incorrect". Segment E1EDS01. I have tried various ways of f

  • Problem during loadgae of file

    Hello, I am trying to modify Loader.java sample to load simple HelloWorld applet to the JCOP simulator. During the execution the problem with call to the installForInstallAbdMakeSelectable aperas. The error code returned by he simulator is just 6a80

  • CSS files not updating correctly

    I'm having some trouble with the css files that are uploaded throught the application builder. When uploading an update to an existing css file, the file is not updated in the browser. Even after closing all browser windows and deleting the temporary

  • Can I use CS5.5 with Business Catalyst

    Hi All, Do I need cloud subscription to use Business Catalyst. Or can I create the site with CS5.5 and manage it through cs5.5 and online editing. Cheers Dave