Aperture Freezes after 3.5 update after trying to share on Photostream

Trying to share photos after latest 3.5 update. App freezes and pictures appear in forefront regardless of the app I choose. Suggestions?

Hi tomfromlandenberg,
If you are having issues with Aperture freezing after a recent update, you may find the following article helpful:
Aperture 3: Troubleshooting Basics
http://support.apple.com/kb/ht3805
Regards,
- Brenden

Similar Messages

IMac never came back on after installing some updates and trying to restart

I installed some updates and tried to restart, but it was taking for ever so I turned it off from the main power button but sktill does not come back on, it just stays on the first white screen where you see the apple logo and the circle going around!
Very frustrating any ideas how should I start it up again! Should I take it to the shop or is there a way to finally turn on?

Great thank you! It worked after I did that and read the articles you, link, you provided, but I finally did the archive install and have access to previous accounts too except my pictures and videos! It has a small "one way" sign on the folder pictures of the previous user (me) and it says I don't have privileges!
Any idea how can I recover these type of folders onto a new hard drive before I proceed to a new system update?
Thank you

I am no longer able to edit my phone contacts after the ios5 update. i tried to restore and get latest updates and still no solution.

After updating, I noticed that I am unable to edit entries to existing phone contacts nor delete contacts.

Go to iCloud on a different device sign in and from there youy can also edit your contacts

HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?

I have and Ipad Model A1458 and serial number DMPJVX72F183 I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

What happens after downloading iPod Updater-after clicking restore?

I have a problem with my ipod that's a bit complicated and can anyone just help? See what happened was, my ipod was in a scan mode, so my cousin tells me. After the battery died, I recharged it, hoping it would stop but it didn't. The next day, all the songs in my ipod are gone and now, I downloaded the ipod updater and plugged in my ipod and clicked restore, and now I don't know if it's ok now. It still says Do Not Disconnect. Should I or shouldn't I? what the **** is up?

It could probably be in the Hard Drive mode. If its not, I would recommend resetting.
Turn on hold, then turn off. Then hold Menu, and the center button at the same time for about 6 seconds, should make the apple logo show and it should fix it.

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

IE 11 links open to Blank page after last Window update

IE 11 links open to Blank page after last Window update, I tried every trouble shooting and suggestions I could find in all forums but to no avail.
Operating system Win 8.
will try any suggestions and report back.

Hi,
Not sure whether you have tried these methods, if yes, keep trying the others.
1.Run IE with no add-ons firstly.
Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
If works, please follow the steps to narrow down which add-on cause the issue.
Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
2.Try resetting IE.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
3. This is caused due to some registry problems occurred. To resolve this issue, follow the below steps:
Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type regsvr32 actxprxy.dll in the Open box, and then click OK.
If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
Restart the Internet Explorer
4.if still not work, run system restore.
Start>type system restore in the search box>click system restore>follow the steps in the wizard to choose a restore point.
For more information, please see:
Nothing happens when you click a link in Internet Explorer
http://support.microsoft.com/kb/175775/en-us#method4
Hope this helps,
Ada Liu
TechNet Community Support

After your last update, the print font in my email is too small

THE PRINT SIZE IN MY EMAIL SHRUNK AFTER YOUR LAST UPDATE
== after your last update

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/

Windows could not start after SP-3 update

Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.

Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000

Aperture freezes after update!!

Hello everyone.
I updated Aperture when i heard of the new update, but now Aperture freezes my Mac completly, so that i have to hold down the power button to shut down the computer.
It only happens after maybe 15 min of use. Only the mouse is working, everything else is frozen.
I just bought the new Macbook Pro 13", i never had the problem before with my old Mac from 2009.
But it seems like it´s the update that causes the problem.
Anyone experienced this or know what to do?

Your mobile strategy seems similar to the mobile strategy I used for a long time, but a very large constraint was that within 3-4 months, the AP library on the internal drive of the MBP became sufficiently large that it needed to be moved off the internal drive and a new AP library needed to be started. All of these libraries used referenced RAW files on an external drive. I only have 160 GB. The other huge issue was the requirement that I do all my project editing on my MBP prior to finalization or I had the onerous task of 'synchronization' I only edit on my MBP when absolutely necessary. Otherwise I would prefer my desktop.
My current model is simplier, assuming that it works. I place my active project pictures in managed libraries with distinct project names on an external drive. I can then load those individual libraries with the Aperture that resides on my laptop or on my desktop and not have to worry about which library is most up to date because I am always working on the same library. After the initial creation of the project specific library, I copy it to a 4TB FW drive and back that up to a second 4TB drive. So before I start working on the library, I have three copies of the library and the original RAW files.
Once the project is completed, I import it into the master library and back up, and archive the final project.
I guess I don't agree with your perspective about the relative importance of getting AP to play nice with USB drives, assuming that is the problem to begin with. I am doubtful, but it certainly is worth testing. I had work to get done today but hopefully I can spend time on this subject tomorrow.
For the looker-ons, I am wondering if anyone else places managed AP libraries on external USB drives and do extensive brush tool editing? If yes, do you have problems with AP crashing? Whose drive do you use, how large is your library and how much editing do you do on a regular basis?

Motion 3 still freezing after after MBP Software Update 1.1

I have just started to use Motion 3 with my new Hi Rez 17" MBP and had a couple of occasions where Motion would freeze completely with the only option being to turn off the MBP and reboot it. I checked the Motion discussions and found that a lot of people had been having trouble with Intel MBP's and Motion after software update 1.0. I was pleased to hear that software update 1.1 was supposed to fix the issues and duely downloaded and installed it.
However, in the past 3 hours I have been trying to work on a motion project (a pretty simple one at that) and motion would have FROZEN AT LEAST 6 TIMES. Disappointed to say the least!
Has anyone else with a similar MBP experienced the same issues with Motion 3 after installing software update 1.1? As it is Motion is next to impossible to use and because the app is not crashing I can't even send off a report to Apple.
Cheers
Pete

Hi Jose,
Although we don't seem to be any closer to a fix, its good to know I'm not the 'Lone Ranger' on this issue.
A bit more info, in case somebody has any ideas. Since my post, at the suggestion from the guys I bought the MBP from I ran the Extended Hardware Test on the OSX install CD in case I might have some issues with something like the MBP's memory (I am running the full 4GB of RAM by the way). It came up completely fine.
Another thing is that I noticed today that there is a new software update available - the 'MacBook MacBook Pro Software Update 1.0'. It doesn't say in the notes that it has anything to do with any motion fixes but I found the naming convention a bit strange. Maybe this is normal but just because they stick 'MacBook' in front I would have thought Apple would have given a different version number considering MacBook Pros have already had a software update 1.0. I was wondering if I try to run software update 1.1 again whether this might have the desired effect but I think I am probably clutching at straws.
Any other feedback is greatly appreciated.
Cheers
Pete

System 10.3.9 freezes at startup after installing Security Update 2006-007

I installed the security update 2006-007 this morning and upon restart everything froze once the words "login window starting" appeared.
I tried a bunch of troubleshooting suggestions from the support pages ("Your Mac won't startup in OS X - 10.3.9 or earlier") including starting in safe mode, single user mode and dumping login preferences, network prefs, reset certain priveleges. None of these solved the problem.
Is the only work around for this to re-install the system?
PowerMac g4 dual proc. Mac OS X (10.3.9)

Ed,
I admit to being somewhat perplexed by your experience. But let me ramble a bit here anyway.
My opinion is that problems of the sort that you are experiencing (freeze after a software update) are almost always due to some software problem. (I base this opinion to a large extent on the experiences of other people in these forums.) The fact that your system works okay with Tiger is consistent with this idea.
But, if it is a software problem, why did it not go way when you re-installed Panther? I am wondering how you did the re-install. Was it an Archive and Install? That is the easiest approach and the first one to try, but there are some things it cannot fix. For one, if user settings and preferences are maintained during the A&I and the problem is related to these settings or preferences, then the problem will remain. In that case, an Erase and Install would be needed to clear out everything. Of course, this also deletes all of your data, so it is something you do not want to do unless you have a backup (which you said that you have).
Another thing that an A&I cannot solve is corruption of the filesystem (computer loses track of where some files start and stop on the hard drive). This problem can usually be detected and often repaired by booting off your install CD and using Disk Utility to repair the disk. You said that you used Disk Utility but gave no other details. I take that to imply that you detected no problems. If there are problems and Disk Utility is unable to fix them, a more powerful utility can sometimes do the job, and sometimes there is no solution except to reformat the hard drive and re-install the operating system. This of course destroys all data on the drive.
If there were a hardware problem behind this, the most likely thing in my view would be some bad blocks on the hard drive. I am pretty sure that Disk Utility, as used above, will look for bad blocks and mask them out if any are found. You mentioned something about 1 Gig of RAM. I think that RAM is unlikely to be the culprit. Problems with RAM usually are manifested as more erratic behavior that what you are experiencing.
You have already exhausted many of usual tricks, so what are your options? It sounds like you do not want to buy a copy of Tiger just to fix this and I can understand that. So, you could go to more and more extreme versions of re-installing your software. By this I mean using your Panther install disks to do an Archive and Install, then to do an Erase and Install if the first did not work, then to reformat and do an install if the Erase and Install did not work. Before doing either of these last two step,s you want to be sure that you have backup that you know works. You have said that "re-installing Panther does not fix the problem" and also that you "haven't done a system restore". It is not really clear to me what you mean by re-installing Panther. Was this from a backup or from your install CD?
If you want to avoid a re-install from your install CD as long as possible, then my suggestion is to attempt to troubleshoot the problem further by booting into Single User mode (which I think you have done). Once you get the disk mounted, I would suggest looking in the system.log file for an error message. Once you have mounted the disk, you can look at the end of the system.log file with the command
tail /var/log/system.log
Look to see if any of the messages look like they might be indicative of a problem. If you see nothing, you can print out more lines by doing this:
tail -40 /var/log/system.log
which will cause the last 40 lines to be printed. If you see any message that might be hinting at a problem, post it back here and perhaps someone will get a clue. I should say at the outset that this way of doing things takes a lot of patience and is not guaranteed to provide a solution.
I hope this ramble helps a bit. I know your are frustrated and I hope you get a solution soon.
Rich

After iOS 8 update doesn't sign in my FaceTime and email account keeps saying incorrect password even after putting right password I tried reset option already still says the same incorrect Please Help

After iOS 8 update doesn't sign in my FaceTime and icloud email account keeps saying incorrect password even after putting right password
I have already tried reset option already still says the same incorrect Please Help

Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

Aperture Freezes after 3.5 update after trying to share on Photostream

Similar Messages

Maybe you are looking for