Aperture freezes when performing a "Consistency Check"

Hi everyone,
today I have updated my Aperture 1.x library to a brand new Aperture 2.1 one.
Unfortunately the conversion process freezed (it looked like it was finished because the little conversion window had disappeared) and, after waiting a very long time, i forced-quit Aperture.
Everything seems to be fine (all the pictures are there...) but I still don't feel very safe.
So I decided to rebuild the library and perform a consistency check: the former went fine while the latter freezes Aperture (I have waited 1+ hour).
Is that a bug or am I doing something wrong?
Thank you.

I apologize for disturbing.
I did a fourth "Consistency Check" and it went fine.
Thank you!

Similar Messages

Aperture freezes when restoring vault

It's aperture 351 running on a macbook air 1.7 GHz Intel core i7 8GB 1600 MHz DDR3 Intel HD graphics 5000 and OS X 10.9.3.
Aperture library was in crashed external HD.
Aperture freezes when trying to restore library in vault.
What can I do?
Thanks.
Humberto

When I try to restore library from the original vault file I know it freezes because I can see in the "force quit" window that Aperture is "not responding".
The "not responding" does not necessarily mean that Aperture is hanging. It may be just too busy to respond.
It is hard to estimate the time it will take for the restore to complete. I have waited for about an hour to rebuild a library of 300 GB.
Where are you trying to restore the vault to? Do you have enough free disk space on the drive?
I've done that. It just doesn't work! Actually it seems to be trying to read something for hours. Don't low how long it takes to open a 320 GB library.
That is a pity. How is the drive formatted, where your vault is located? Is it formatted MacOS Extended (Journaled)? Otherwise you may have problems with pathnames and files not found.
Also, have you set the "Ignore ownership on this volume" flag for the drive with this library?
You can do this from the File > Get Info" panel for the drive.
If the file system is o.k., and also the "Ignore ownership" flag, try the library first Aid Tools on your vault with the the changed filename extension. Try to repair the permissions, the database, and to rebuild the library, in this order:
Make a copy of the vault, if you do not have a backup.
Hold down the key combination alt/option ⌥ and command ⌘ at the same time, while launching Aperture by double-clicking the vault. Keep holding down the keys firmly, until you see the First Aid panel.
Select "Repair database" from the panel. This may take a long time for a large library. Don't interrupt it.
If Repair does not suffice, do a Rebuil as well.

Aperture freezes when trying to export photo

Everytime I edit a photo in Aperture, the program freezes when I try to export the photo. Why? I can't even "force close" the program, I have to turn off the computer!

I can't even "force close" the program, I have to turn off the computer!
Try to send a signal from the Terminal, as described in this user tip:
If Aperture is unresponsive, how to quit?
Everytime I edit a photo in Aperture, the program freezes when I try to export the photo.
What is your Aperture version?
Have you tried any trouble shooting steps?
First of all check, if you have enough free disk space for the export. The oprating system needs working space in addition to the size of the of the exported image file. Keep at least 10GB free.
Where are you exporting to? To a folder on your system drive or an external drive? Do you have write permissions on that folder?
Try to repair your Aperture library - see this Manual page:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If repairing the database does not help, try "repair permissions" as well, and finally "Rebuild". Make a backup of your library, before trying to rebuild.
-- Léonie

My iPhone keeps freezing when I tap to check emails, then it returns to home screen HELP

Please help, my iPhone has a mind of it's own, it freezes when I check my my email, it returns to the home screen then it takes about 30secs to work again.

Try here. It also containes a link for XP
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Mac Pro Freezes when performing certain Tasks?

My Mac pro has been freezing recently which requires me to hard boot and I'm not quite sure whats going on. Let me go a bit more into detail.
Now when I say freeze, I don't mean beach balling, I mean literally the entire screen is motionless and I must hard reboot. Its odd really, the computer only freezing when doing certain tasks, such as when I render 3D graphics with Cinema4D, or whenever I play certain games on steam.
I have recently installed windows as a partition for bootcamp, but I don't believe that is the issue. I have experienced the freezes while running my machine in both Windows and Mac.
Its important to note that when booting my Mac in SAFEMODE, the freezing does not occur while performing the same tasks. So this leads me to believe there is a process going on thats causing the computer to freeze up?
What I think I have managed to rule out as problems:
- Not a Hard Drive failing issue, I booted from my backup hard drive and the freezing still occurs.
- Not a Heat issue, I've installed iStat and my top temperature barely raises to 60 degrees celsius when freezing occurs.
- Not an issue with the Windows partition, as I booted from my backup drive that is without the partition and the freezes still occur.
- Not a Ram issue, I took my ram cards out and swapped them around.
One other things... Not sure if this is relevant, but upon one of the freezes, I rebooted and got this on my startup screen, It was bizaar and it froze here as well. This only occured once but I snapped a photo of it.
Any ideas? Could it be a graphics card issue?
Thank you for your help!
Specs:
Mac Pro (Early 2009)
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro4,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.26 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per core):          256 KB
L3 Cache (per processor):          8 MB
Memory:          8 GB
Processor Interconnect Speed:          5.86 GT/s
ATI Radeon HD 4870:

That panic was not caused by third-party software. If it's a recurring problem, the remaining possibilities are (1) a damaged Mac OS installation; (2) a hardware fault, which could be internal or in a wired peripheral device; and (3) an obscure bug in the Mac OS.
You can rule out the first possibility by reinstalling the Mac OS. Probably there will be no change. In that case, make a "Genius" appointment at an Apple Store to have the machine tested.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the Lion recovery partition, if present.

Aperture freezes when syncing to Smugmug

Upgraded to 3.5 and added Smugmug account for sharing. I can click on the Smugmug option in the projects leftside toolbar and photos are displayed. I attempted to create a new Smugmug gallery from an existing project and Aperture freezes. Have tried multiple times with same result. I must Force Quit to get out of Aperture. Is anyone else having this issue?
Thank You,
Jonathan Tarr

I do not have a solution for you, but just so you know, mine has been working fine. I just wish they would add export presets so I can upload as different size files.

Aperture freezes when loading

When i open Aperture the loading window in the photographs is frozen as if the picture will not load,,,,,,any suggestions

When I try to restore library from the original vault file I know it freezes because I can see in the "force quit" window that Aperture is "not responding".
The "not responding" does not necessarily mean that Aperture is hanging. It may be just too busy to respond.
It is hard to estimate the time it will take for the restore to complete. I have waited for about an hour to rebuild a library of 300 GB.
Where are you trying to restore the vault to? Do you have enough free disk space on the drive?
I've done that. It just doesn't work! Actually it seems to be trying to read something for hours. Don't low how long it takes to open a 320 GB library.
That is a pity. How is the drive formatted, where your vault is located? Is it formatted MacOS Extended (Journaled)? Otherwise you may have problems with pathnames and files not found.
Also, have you set the "Ignore ownership on this volume" flag for the drive with this library?
You can do this from the File > Get Info" panel for the drive.
If the file system is o.k., and also the "Ignore ownership" flag, try the library first Aid Tools on your vault with the the changed filename extension. Try to repair the permissions, the database, and to rebuild the library, in this order:
Make a copy of the vault, if you do not have a backup.
Hold down the key combination alt/option ⌥ and command ⌘ at the same time, while launching Aperture by double-clicking the vault. Keep holding down the keys firmly, until you see the First Aid panel.
Select "Repair database" from the panel. This may take a long time for a large library. Don't interrupt it.
If Repair does not suffice, do a Rebuil as well.

How long should Aperture take to run a consistancy Check. (15,000 items)

Running on a mac pro for reference
It seems to have stopped at "running VACUUM on database". No movement for 30 mins.
Does this procedure take a long times
Thanks

I also would like to know as I have a aperture file of about 35000 items and running on an iMac, it has been running for days with the progress bar about 3/4 complete but no longer seems to be moving. The Activity Monitor shows it taking up CPU time and performing context switches and Mach Messages Out, Mach System Calls, and Unix System Calls. But it is also only using about 0.8% of the CPU.

FCP keeps freezing, when performing color correction on new macbook pro

I'm trying to do some color correction on a couple of videos. No problems doing this, until I try to render them: sometimes it'll do the job just fine, but more than often it just gets stuck about halfway through rendering, and everything freezes up. I tried using a seperate hard drive instead of the standard hard drive in my macbook pro, but this did not seem to help things.. Any other advice?

Motion JPEG?
Not really a good editing codec.
Convert your MPEG 2 to Quicktime using at least the DV codec or one of the others as found in the Easy Setups menu.

Consistency check error 38011: Logical tables from multiple subject areas..

I received multiple 38011 errors when performing a consistency check after merging repositories:
For example:
Logical tables from multiple subject areas associated, OHRP and Enterprise Warehouse
(OHRP and Enterprise Warehouse refer to different business models)
I'm really not sure what this means, and Metalink and Google aren't turning up anything.
Thoughts?
-John

John,
Does it say anything about Assertion Failure? Also, this is straight up from help regarding import (through file menu) "Use this option when the objects you import are unrelated to objects already in the repository such as when the business model and physical layer objects do not exist. If an object of the same name and type exists, the import process overwrites the existing object with the new object. When you import objects from one repository into another, the repository from which you are importing must be consistent."
Sometimes Merge does bring unexpected (and unwanted results) - especially if there're presentation aliases, duplicate business models, or naming conflicts. If it's not too late, I suggest you use Import,rather than Merge, also, preferably starting with a new RPD file. This would enable you to bring items piece-by-piece and hopefully would allow you to isolate the problem.
Also, depending on the size - it's sometimes preferable to just reproduce missing part(s). I hope this is helpful.
Also, I forgot to say - the Import is deprecated and not supported. They suggest you use Project Extract and Merge. If Merge isn't working out for you and Import isn't an option - maybe you could try Project.
Edited by: wildmight on Mar 9, 2009 7:58 AM

When do consistency check for a sharepoint content databse : that RBSID in table AllDocStreams registered with RBS is invalid

Hi
In my sharepont farm a web application configured with RBS and its working fine,
when users upload pdfs the no of files are increased in RBS file system folder,
but when i run Consistency check before running RBS maintainer for cleaning garbage dta for this web applications content database , i faced below issue , its saying
C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer>Microsoft.Da
ta.SqlRemoteBlobs.Maintainer.exe -ConnectionStringName RBS_2 -Operation Consiste
ncyCheck -ConsistencyCheckMode c
Starting Maintainer tasks.
Starting RBS consistency check with check only.
The column <RbsId> in table <dbo.AllDocStreams>
registered with RBS is invalid.
and also when i repair consistency checks its saying same message, that RBSID in table AllDocStreams registered with RBS is invalid.
and also its recommended to check consistency before cleaning garbage data from content database
adil

http://social.technet.microsoft.com/Forums/sharepoint/en-US/e9bda580-b9e7-48c5-b18c-485e016677a1/rbs-maintainer-not-cleanup-files-in-file-system-sharepoint-2010?forum=sharepointadminprevious
The GC of RBS maintainer just purges BLOBs in SQL Server. And FILESTREAM GC is needed to purge the files in file system.
http://www.sqlskills.com/BLOGS/PAUL/post/FILESTREAM-garbage-collection.aspx : (FILESTREAM GC)... runs as part of the database checkpoint
process. This is what causes some confusion - an old FILESTREAM file will not be removed until after it is no longer needed AND a checkpoint runs.
Yes, In Simple recovery mode, just run SQL statement:
CHECKPOINT;
In Full recovery mode, two transaction log with CHECKPOINT are needed. Detail in the link above.
http://blog.avtex.com/2011/05/16/remote-blob-store-rbs-and-sharepoint-2010-part-2/
If this helped you resolve your issue, please mark it Answered

OBIEE Consistency Check is taking too much time

Hi,
When I run consistency check globally, it takes too much time. Itt is waiting after completing about %80 of it. I can't click on it, the application is freezing. How can I recover it? What can be the cause of this problem?
Thank you for your attention,
Regards

Hello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh

Routing Consistency Check in batch ?

Hey folks!
A business requirement has been raised to perform a consistency check for all Routing Task Lists for a specific plant. I'm aware of the consistency check within the Routing that can be performed online. Anyone know of a batch/background job that can validate routings and report errors?
The business case is as follows: Reference Operation Sets are utilized within Routing Task Lists. If a change is made to the Reference Operation Set (say add additional operations) and these additional operations conflict in the routing this ROS is utilized, this will cause a routing error. Yet there is no way to identify this error until someone checks the routing or writes a production order against.
Any help on the above would be great. Points are waiting to be awarded!

Nathan,
I do not think there is a background program that can run to check for such inconsistency.
However when MRP runs system will detect routing inconsistency & will display exception message against planned order.
So nett result is MRP controller will know about this much before he converts planned order to production order.
They can look for exception messages either under Tcode: MD04/ MD05 or collectively under MD06/MD07 group by exception message.
Message 62 - Scheduling: Master data inconsistent is one such message & it falls under Exception group 4 in standard SAP.
So if MRP controller checks Tcode : MD06 & limits selection criteria by exception group 4 messages he can nail down all such errors in advance.
Thanks,
Ram

Force Consistency Check??

I'm trying to create a VPC between two 5ks to a single server but when I bring them up the VPC never changes from the down state.... Below shows the config of each and some show commands. It seems like 5k2 hasn't performed a consistency check but 5k1 has and it shows successful.
5k1
int eth 1/12
channel-group 204 mode active
interface port-channel204
switchport access vlan 1072
speed 10000
vpc 204
5k1# show port-channel summary
Flags: D - Down        P - Up in port-channel (members)
        I - Individual H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
        M - Not in use. Min-links not met
Group Port-       Type     Protocol Member Ports
      Channel
1     Po1(SU)     Eth      NONE      Eth1/31(P)
204   Po204(SD)   Eth      LACP      Eth1/12(I)
5k1# show vpc br
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link
vPC domain id                   : 5
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
Per-vlan consistency status     : success
Type-2 consistency status       : success
vPC role                        : secondary
Number of vPCs configured       : 9
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -
Graceful Consistency Check      : Enabled
vPC Peer-link status
id   Port   Status Active vlans
1    Po1    up     1-9,33,36,43,46,329,1050-1059,1070,1072-1073,1101-
                   1116,1997
vPC status
id     Port        Status Consistency Reason                     Active vlans
204    Po204       down* success     success                    -
5k2
5k2# show run int port 204
!Command: show running-config interface port-channel204
!Time: Tue Dec 17 09:35:46 2013
version 5.1(3)N1(1a)
interface port-channel204
switchport access vlan 1072
speed 10000
vpc 204
interface Ethernet1/12
channel-group 204 mode active
5k2# show port-channel summary
Flags: D - Down        P - Up in port-channel (members)
        I - Individual H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
        M - Not in use. Min-links not met
Group Port-       Type     Protocol Member Ports
      Channel
1     Po1(SU)     Eth      NONE      Eth1/32(P)
204   Po204(SD)   Eth      LACP      Eth1/12(I)
5k2# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link
vPC domain id                   : 5
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
Per-vlan consistency status     : success
Type-2 consistency status       : success
vPC role                        : primary
Number of vPCs configured       : 41
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -
Graceful Consistency Check      : Enabled
vPC Peer-link status
id   Port   Status Active vlans
1    Po1    up     1-9,33,36,43,46,329,1050-1059,1070,1072-1073,1101-
                   1116,1997
vPC status
id     Port        Status Consistency Reason                     Active vlans
204    Po204       down* Not         Consistency Check Not      -
                          Applicable Performed

Hi Justin,
The Link Aggregate you've configured is what's referred to as dynamic, and as such it will use the Link Aggregation Control Protocol (LACP) to negotiate with the link partner i.e., the server, on a number of parameters to use for the forming and control of the aggregate.
What we can see from the show port-channel summary command is that the links are in the Individual (I) state. This is usually an indication that the remote device is not sending LACPDU frames. You should be able to see this by checking the Recv column in the output of show lacp counters interface port-channel 204 command. It will most likely be 0.
If that's the case you'll need to check with the server guys how they have the aggregate configured. It must be using NIC teaming software supporting something along the lines of IEEE 802.3ad Dynamic (HP), IEEE 802.3ad or mode=4 (Linux) or LACP with VMware ESXi.
If you're connecting to a server whose OS only supports static link aggregation e.g., VMware ESXi prior to version 5.1, then you should change the Nexus configuration to use static Link Aggregation with the channel-group 204 mode on command under the Ethernet1/12 interface. Note that you can't change the keywords used with the channel-group command, but have to remove it and add it back using the on keyword.
Regards

Connection dropped between DPM and Agent during consistency check, following DPM 2012 SP1 to DPM 2012 R2

Recently I have updated a DPM 2012 SP1 standalone server to DPM 2012 R2. That it’s self was a challenge... Following the upgrade most of the protection groups required consistency checks. For some time I have been having problems performing these consistency
checks on remote servers over a 10Meg link.
On the DPM server I would kick off a ping to the remote host, then start a consistency check. Within a few seconds I would start to get dropped pings, and very large ping response times, 3000ms plus. Within 3 minutes the pings would time out completely and
no connections can be made to the remote server, RDP etc. However any other server on the network can connect to the remote client. Eventually the DPM jobs times out and sometime later the pings also return.
The resolution to this has taken some digging but this is what I have found. The DPM agent update does not seem to fully work and requires a reinstall. Here is my process:
Logon to remote client server
Install .net 4 (a raw install of the client requires this, may not be needed when done via DPM)
Via Add Remove Programs, remove DPM agent
Clean up Reg
Delete "HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager"
Delete "HKLM\System\CurrentControlSet\Services\DPM**" (However this key is not there for me)
Back onto DPM Server
Modified protection groups as required to remove all instances of the client server
Remove Agent for client server
Install agent via DPM (watch for the glitch right at the end where it does a failed, then succeed…)
REBOOT client server
Add back into protection group
Consistency check kicked off automatically
This seems to have fixed the issue.

Hi,
The prerequisite required for DPM 2012 SP1 that must be installed is a re-rerelease of UR3 which is 4.1.3317.0 - please download and install the update specified.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Aperture freezes when performing a "Consistency Check"

Similar Messages

Maybe you are looking for