Aperture hangs when adjusting the exposure....

After upgrading to Aperture 3, I've discovered that it often hangs when I try to adjust the exposure...have to force quit....happened three times today. Is this a known issue?

Yes. Read other threads on this. I work around by first clicking on an exposure adjustment without moving a slider. Just clicking sets Aperture to 'process.' Once you see 'processing' has stopped, you will likely be good to go. Also, if an image freezes Aperture, after relaunching the application, go back to that image and force a regeneration of the thumbnail (or preview). This too will help. And report to Apple. The more they hear, the more likely to repair the issue.

Similar Messages

  • How do I disable the sound effect on my MacBook Air when adjusting the volume

    how do I disable the sound effect on my MacBook Air when adjusting the volume

    Thanks Ralph, that fixed it, I did uncheck that box earlier however I had not restarted the computer. Thanks again.

  • Adobe reader XI crash and hangs when open the pdf file

    After update the adobe reader xi 11.0.10, the reader always crashes and hangs when open the pdf file. Please help me how to do.

    Ben Leung wrote:
    HThis situation is started after I clear the pop up advertisement.
    What kind of advertisement?  In Adobe Reader?  Can you post a screenshot of that: https://forums.adobe.com/thread/1070933
    Regarding the crash, can you try disabling Protected Mode through the registry: download, unzip, then run the registry script https://files.acrobat.com/a/preview/49eeb48b-07c5-4502-984c-8a25259914fa

  • When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

    When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
    Thank you.

    Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

  • Weird ticking sound when adjusting the volume...

    Hi all
    When adjusting the volume using the F3 F4, my new ibook 12" g4 makes a weird ticking sound before it catches up an adjusts the volume with the normal "blop" sound. Is this normal? Batteri is on "normal."
    Thanks
    Erlend

    I have this same problem with my new 1.33Ghz iBook G4. I've had the logic board replaced twice and the top assembly with the speakers replaced twice also. It still makes the ticking noise and it's quite specific to reproduce so none of the Apple tech have spent the time to reproduce it. I think this problem is more wide spread than Apple realizes.
    Here are the factors that HAVE to exist for this problem to be reproduced:
    1. The computer must be have the AC adapter unplugged and running off of the battery.
    2. Un-click "Play feedback when volume is changed" in System Preferences under "Sound" (While this is not exclusive to having the "ticking audio" problem occur, it is easier to notice with this box unchecked)
    3. 10.4.2 or 10.4.3 (even happens on a fresh install)
    4. Push the F4 and F5 keys to change the volume for at least 10-20 seconds and the "ticking sound" will occur. (the lagging after the tick is most annoying.)
    Launching iTunes and playing audio will temporarily make this problem subside. Once this problem occurs with "Play feedback when volume is changed" unchecked, it will continue until audio is played or the sound preference panel is accessed. Often the sound balance will be 100% to the left after this problem has started occuring. (Checking the Sound preference panel shows this)
    Has anyone had this problem fixed permanently? Apple seems to be unaware of this problem. 10.4.4 could fix it. Unfortunately we are not even sure if this is a hardware problem or a software issue. I will post with details of what happens when I bring my machine in to the Apple store for the 4th or 5th time.
    Power Mac G5 1.8Ghz DP, 1.25GB RAM. G4 iBook 1.33Ghz   Mac OS X (10.4.2)  

  • I'm using LR 5.6.  The Enter key should increase the exposure but it increases Contrast instead.  How can I make the Enter key adjust the exposure?

    Hello
    As explained in the heading, I'm using LR 5.6 on a PC (Win 7).  The Enter key should increase the exposure but it increases Contrast instead.  How can I make the Enter key adjust the exposure, as it should?  I have reset the settings to Default in the Develop module but to no avail.  Please help!  Thanks.
    Kind Regards
    Farrukh Hyder

    I am not aware that the ENTER key should increase exposure, and it certainly does not increase exposure (or any other slider) on my Lightroom 5.6 (Windows 7)
    If you click on the word Exposure, then the + and - keys increases or decrease exposure by 0.1 or -0.1

  • SAP system hang when start the addon.

    Dear Expert,
    I just upgrade one of the SAP B1 server from 2007A to SAP B1 8.8 PL15, everything going smooth both server and clients.
    Except one client (new laptop with Win 7 Pro x86), this laptop fail to start the addon.
    Others clients with same specs Win 7 Pro have no problem to start addon.
    Addon started manually.
    After click start button for that addon, the system hang. If without the addon system working fine.
    If anyone have ideas to check much appreciate and thanks in advance.
    Regards,
    Mat

    Hi Bala,
    I did try your steps, but no luck. System still hang when start the addon.
    But, I can start SAP addon , example i try Screen Painter, and can start successfully. Only our addon cannot start.
    I'm not suspect our addon because others client working smooth, even the server also working fine.
    I did re-install DIAPI, even re-install SAP client a few time, but still fail to start addon (delete SAP client folder before install).
    Any one face this problem?
    Regards,
    mat
    Edited by: Mat Mat on Apr 21, 2011 10:43 AM

  • Aperture crashes when using the Crop Tool

    I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
    THIS is happening more frequently.
    Help!!

    I had a similar problem. I solved it with these instructions on my blog.
    http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
    Max

  • When adjusting the date of a photo I can not enter the year

    When in I photo , and I need to adjust the date of the photo that I have scanned in, I go to that drop down menu and try to enter the year but can not do so.

    I go to that drop down menu
    Which menu would that be?  Have you tried the Photos ➙ Batch Change ➙ Date menu option?  That menu option should add the Image Capture date to the EXIF data for the photo.
    OT

  • Audio and Video sound cuts out when adjusting the volume whilst playing powerpoint presentations

    I have just bought a new hp laptop and when running power point presentations with embedded media (for my job) I cannot adjust the volume of the sound when the audio or video file is playing. It simply cuts out and stops the video or sound from playing. I thought at first that this might be an Office 2010 issue but now it seems more likely to be a setting on the laptop. If anyone has any answers they would be much appreciated!! Many Thanks

    I hear you on this. I just tested out the 3GS video for a concert where band mixed electronica and guitars.. boom boom satellites and I noticed when close to the speaker side of the stage the sound cut in/out. But when I moved farther away sound remained consistant.
    What I may suggest is lowering the volume to mid range when closer to your sound source then
    correct (if needed) using outside software.. iMovie Final Cut, etc..
    Yes, I wasn't to please about losing sound on a what I recorded.. ~A~

  • My white macbook screen only works shortly when booting and when adjusting the brightness (turning it all the way down and up from there) and only stays on for seconds. any idea what to do?

    Hi. I'm having quite an issue here. My macbook screen is only lid when i boot and when i adjust the brightness of the screen (going all the way down and up from there). either way it goes black again after a few seconds. External monitor works though.
    Any ideas on how to solve this?
    Lasse

    I buy the dirty theory as well.  plug and unplug a whole bunch of times - you may be able to dislodge whatever is causing the issue.  Also - make sure the plug is fully seated - (some of the pad jacks are vert tight, and you really have to work them in).  I gather you are out of warrenty?  Blow in the hole.
    last resotr - take a toothpick, dip the end in fingernail polish, get rid of the xs, then very very gently, insert the pick and try to rub the contacts.  very gently as you do not want to bend them.

  • Javaw.exe hangs when activating the console

    When activating the console in WebStart, it looks like WinXP doesn't release javaw.exe, even when the application gets closed. This never occurs when the console is not activated.
    A possible bug ?
    - Pierre-Yves

    I have searched so many forums and every body (if any at all) state I need to edit my code to sort this out. Well here's a shocker! :) i dont write any code. I am installing J2RE1.4.1_02 and unfortunately due to our other applications, can only use this version. I am installing it on XP images and so far have only had a 60% success rate. Could there be an application installed or a process that is preventing the console from opening? I noticed the way the data is entered into the registry is slightly different from the successful ones. Is there a work around?
    Please I am desperate as I am installing this onto 400 PC's.

  • Aperture crashes when adjusting print settings.

    Hello,
    Macbook Pro OSX 10.4.11
    Aperture 1.5.6
    ATI Graphics Card
    I've had Aperture crash on me about 6 times today. Each time I am adjusting my print settings. Very frustrating. Within the last 48 hrs. Aperture has lost a handful of images. They were there one minute, the next they were gone. Now it's crashing when I'm adjusting print settings.
    Also... probably shouldn't post this here but... My computer shuts down when running on less than 33% battery power. Just shuts itself right down... no warning, nothing.
    Any help... HUGELY appreciated.

    Did you ever figure this out? My MBP is doing the same thing. I'm trying to print contact sheets. I can configure the images for the sheet, but the "Printer" box show "No printer selected" and I cannot click on the text to add or type in a printer.
    Below it, the "Print Settings" button is active, but clicking on it crashes Aperture within 3 or four seconds.
    I think this must be an Aperture problem as I can print from PS and from the various Nikon programs I have.

  • Solstice backup 6.1 hang when invoking the autochanger "SUN Storedge L8 "

    My company have a SUN Storedge L8 attached to a SUN Solaris 9 (SPARC) while I can only do a tar to the /dev/rmt/0, whenever I tried to interact with the jukebox with the solstice backup, the program hang definitely.
    grep '/usr/kernel/drv/lus' /var/sadm/install/contents
    /usr/kernel/drv/lus f none 0555 root bin 34624 12073 993189557 SUNWsbus2
    /usr/kernel/drv/lus.conf f none 0444 root bin 3754 45438 993190441 SUNWsbus2
    /usr/kernel/drv/lus32 f none 0555 root bin 33444 4422 993213667 SUNWsbus2
    pkginfo -l SUNWsbus2
    PKGINST: SUNWsbus2
    NAME: Solstice Backup (Backup/Recover) Device Drivers
    CATEGORY: system
    ARCH: sparc
    VERSION: 6.1,REV=Build.186
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    PSTAMP: gelato010622054128
    INSTDATE: Apr 08 2003 13:25
    STATUS: completely installed
    FILES: 48 installed pathnames
    44 executables
    37896 blocks used (approx)
    this machine has installed the solstice backup manager
    pkginfo | grep -i Solstice
    system SUNWmibii Solstice Enterprise Agents 1.0.3 SNMP daemon
    system SUNWsacom Solstice Enterprise Agents 1.0.3 files for root file system
    system SUNWsadmi Solstice Enterprise Agents 1.0.3 Desktop Management Interface
    system SUNWsadml Solstice Launcher.
    system SUNWsadmx Solstice Enterprise Agents 1.0.3 Desktop Management Interface Libraries (64-bit)
    system SUNWsasnm Solstice Enterprise Agents 1.0.3 Simple Network Management Protocol
    system SUNWsasnx Solstice Enterprise Agents 1.0.3 Simple Network Management Protocol Libraries (64-bit)
    application SUNWsbuc Solstice Backup (Backup/Recover) Client
    application SUNWsbum Solstice Backup (Backup/Recover) Man
    application SUNWsbun Solstice Backup (Backup/Recover) Storage Node
    application SUNWsbus1 Solstice Backup (Backup/Recover) Server
    system SUNWsbus2 Solstice Backup (Backup/Recover) Device Drivers
    under the server->registration, I found that the registration contains :-
    Autochanger Module, 9 slots/9
    ClientPaks for Windows/1
    Networker for UNIX, Workgroup edition (8 clients per server)1 server
    Networker Module for Oracl/1
    BTW, inquire shows:-
    /etc/LGTOuscsi/inquire
    [email protected]:TOSHIBA DVD-ROM SD-M14011009|CD-ROM
    [email protected]:ADIC FastStor 2 A12r|Autochanger (Jukebox)
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    where cfgadm -alv shows:-
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c0 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
    c0::/dev/lus connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM n /devices/pci@8,700000/scsi@6:scsi::/dev/lus
    c0::dsk/c0t6d0 connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM y /devices/pci@8,700000/scsi@6:scsi::dsk/c0t6d0
    c1 connected configured unknown
    unavailable fc-private n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc
    c1::21000004cfe34092 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34092
    c1::21000004cfe34350 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34350
    c2 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
    c2::lus1 connected configured unknown
    unavailable unknown n /devices/pci@8,700000/scsi@6,1:scsi::lus1
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    c4 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@5:scsi
    c4::lus3 connected configured unknown
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@5:scsi::lus3
    usb0/1 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-kbd n /devices/pci@8,700000/usb@5,3:1
    usb0/2 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:2
    usb0/3 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-mouse n /devices/pci@8,700000/usb@5,3:3
    usb0/4 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:4
    nsrjb shows
    Jukebox L8:
    slot volume pool volume id recyclable
    1: dwbak.inc.day0.wk0.001* 2481680129
    2: dwbak.inc.day0.wk0.002 DW Incremental 2481704705 no
    3: dwbak.inc.day0.wk0.003 DW Incremental 2481729793 no
    4: -* -
    5: dwbak.inc.day0.wk0.005 DW Incremental 2481779201 no
    6: dwbak.inc.day0.wk0.006 DW Incremental 2481804289 no
    7: dwbak.inc.day0.wk0.007 DW Incremental 2481829889 no
    8: dwbak.inc.day0.wk0.008 DW Incremental 2481854209 no
    *not registered in the NetWorker media data base
    drive 1 (/dev/rmt/0cbn) slot 5: dwbak.inc.day0.wk0.005
    nsrjb -HE hang indefinitly, so does nsrjb -HHE. devfsadm -c tape also hang while simply devfsadm can run without problem and cfgadm -alv c3 provide the following:-
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    nsjrb result should be past history, coz I am doing tar and manually changing the slot for quite some time already. Now I unconnect the cable and run devfsadm and then cfgadm -alv shows
    cfgadm -alv
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c0 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
    c0::/dev/lus connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM n /devices/pci@8,700000/scsi@6:scsi::/dev/lus
    c0::dsk/c0t6d0 connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM y /devices/pci@8,700000/scsi@6:scsi::dsk/c0t6d0
    c1 connected configured unknown
    unavailable fc-private n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc
    c1::21000004cfe34092 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34092
    c1::21000004cfe34350 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34350
    c2 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
    c2::lus1 connected configured unknown
    unavailable unknown n /devices/pci@8,700000/scsi@6,1:scsi::lus1
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    c4 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@5:scsi
    c4::lus3 connected configured unknown
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@5:scsi::lus3
    usb0/1 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-kbd n /devices/pci@8,700000/usb@5,3:1
    usb0/2 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:2
    usb0/3 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-mouse n /devices/pci@8,700000/usb@5,3:3
    usb0/4 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:4
    and inquire still shows
    [email protected]:TOSHIBA DVD-ROM SD-M14011009|CD-ROM
    [email protected]:ADIC FastStor 2 A12r|Autochanger (Jukebox)
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    and then I reconnect the cable I saw a lot of error message in dmesg:-
    Jun 19 13:47:37 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:47:37 server Received unexpected SCSI Reset
    Jun 19 13:47:37 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:47:37 server Received unexpected SCSI Reset
    Jun 19 13:51:30 server scsi: [ID 107833 kern.notice] /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:30 server Failed to Get Features
    Jun 19 13:51:50 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:50 server ISP: Firmware cmd timeout
    Jun 19 13:51:50 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:50 server Fatal error, resetting interface, flg 1
    and devfsadm hang. So I double check the past demsg and found a lot of similar SCSI error message as below:-
    Jun 19 13:43:12 server probe request for LUN 0 denied: max LUN -1
    Jun 19 13:43:12 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@5 (qus1):
    Is that represent a hardware failure either on the jukebox or the SCSI controller? Or it is indeed a software corruption that can only be solved by reinstallation? But unfortunately I don't have the media on hand.
    PS.a more details can be found under expert exchange thru the links below:-
    http://www.experts-exchange.com/OS/Unix/Solaris/Q_23413012.html#a21749881
    http://www.experts-exchange.com/OS/Unix/Solaris/Q_23478147.html

    My company have a SUN Storedge L8 attached to a SUN Solaris 9 (SPARC) while I can only do a tar to the /dev/rmt/0, whenever I tried to interact with the jukebox with the solstice backup, the program hang definitely.
    grep '/usr/kernel/drv/lus' /var/sadm/install/contents
    /usr/kernel/drv/lus f none 0555 root bin 34624 12073 993189557 SUNWsbus2
    /usr/kernel/drv/lus.conf f none 0444 root bin 3754 45438 993190441 SUNWsbus2
    /usr/kernel/drv/lus32 f none 0555 root bin 33444 4422 993213667 SUNWsbus2
    pkginfo -l SUNWsbus2
    PKGINST: SUNWsbus2
    NAME: Solstice Backup (Backup/Recover) Device Drivers
    CATEGORY: system
    ARCH: sparc
    VERSION: 6.1,REV=Build.186
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    PSTAMP: gelato010622054128
    INSTDATE: Apr 08 2003 13:25
    STATUS: completely installed
    FILES: 48 installed pathnames
    44 executables
    37896 blocks used (approx)
    this machine has installed the solstice backup manager
    pkginfo | grep -i Solstice
    system SUNWmibii Solstice Enterprise Agents 1.0.3 SNMP daemon
    system SUNWsacom Solstice Enterprise Agents 1.0.3 files for root file system
    system SUNWsadmi Solstice Enterprise Agents 1.0.3 Desktop Management Interface
    system SUNWsadml Solstice Launcher.
    system SUNWsadmx Solstice Enterprise Agents 1.0.3 Desktop Management Interface Libraries (64-bit)
    system SUNWsasnm Solstice Enterprise Agents 1.0.3 Simple Network Management Protocol
    system SUNWsasnx Solstice Enterprise Agents 1.0.3 Simple Network Management Protocol Libraries (64-bit)
    application SUNWsbuc Solstice Backup (Backup/Recover) Client
    application SUNWsbum Solstice Backup (Backup/Recover) Man
    application SUNWsbun Solstice Backup (Backup/Recover) Storage Node
    application SUNWsbus1 Solstice Backup (Backup/Recover) Server
    system SUNWsbus2 Solstice Backup (Backup/Recover) Device Drivers
    under the server->registration, I found that the registration contains :-
    Autochanger Module, 9 slots/9
    ClientPaks for Windows/1
    Networker for UNIX, Workgroup edition (8 clients per server)1 server
    Networker Module for Oracl/1
    BTW, inquire shows:-
    /etc/LGTOuscsi/inquire
    [email protected]:TOSHIBA DVD-ROM SD-M14011009|CD-ROM
    [email protected]:ADIC FastStor 2 A12r|Autochanger (Jukebox)
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    where cfgadm -alv shows:-
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c0 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
    c0::/dev/lus connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM n /devices/pci@8,700000/scsi@6:scsi::/dev/lus
    c0::dsk/c0t6d0 connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM y /devices/pci@8,700000/scsi@6:scsi::dsk/c0t6d0
    c1 connected configured unknown
    unavailable fc-private n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc
    c1::21000004cfe34092 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34092
    c1::21000004cfe34350 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34350
    c2 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
    c2::lus1 connected configured unknown
    unavailable unknown n /devices/pci@8,700000/scsi@6,1:scsi::lus1
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    c4 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@5:scsi
    c4::lus3 connected configured unknown
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@5:scsi::lus3
    usb0/1 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-kbd n /devices/pci@8,700000/usb@5,3:1
    usb0/2 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:2
    usb0/3 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-mouse n /devices/pci@8,700000/usb@5,3:3
    usb0/4 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:4
    nsrjb shows
    Jukebox L8:
    slot volume pool volume id recyclable
    1: dwbak.inc.day0.wk0.001* 2481680129
    2: dwbak.inc.day0.wk0.002 DW Incremental 2481704705 no
    3: dwbak.inc.day0.wk0.003 DW Incremental 2481729793 no
    4: -* -
    5: dwbak.inc.day0.wk0.005 DW Incremental 2481779201 no
    6: dwbak.inc.day0.wk0.006 DW Incremental 2481804289 no
    7: dwbak.inc.day0.wk0.007 DW Incremental 2481829889 no
    8: dwbak.inc.day0.wk0.008 DW Incremental 2481854209 no
    *not registered in the NetWorker media data base
    drive 1 (/dev/rmt/0cbn) slot 5: dwbak.inc.day0.wk0.005
    nsrjb -HE hang indefinitly, so does nsrjb -HHE. devfsadm -c tape also hang while simply devfsadm can run without problem and cfgadm -alv c3 provide the following:-
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    nsjrb result should be past history, coz I am doing tar and manually changing the slot for quite some time already. Now I unconnect the cable and run devfsadm and then cfgadm -alv shows
    cfgadm -alv
    Ap_Id Receptacle Occupant Condition Information
    When Type Busy Phys_Id
    c0 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
    c0::/dev/lus connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM n /devices/pci@8,700000/scsi@6:scsi::/dev/lus
    c0::dsk/c0t6d0 connected configured unknown TOSHIBA DVD-ROM SD-M1401
    unavailable CD-ROM y /devices/pci@8,700000/scsi@6:scsi::dsk/c0t6d0
    c1 connected configured unknown
    unavailable fc-private n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc
    c1::21000004cfe34092 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34092
    c1::21000004cfe34350 connected configured unknown SEAGATE ST373307FSUN72G
    unavailable disk n /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::21000004cfe34350
    c2 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
    c2::lus1 connected configured unknown
    unavailable unknown n /devices/pci@8,700000/scsi@6,1:scsi::lus1
    c3 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@4:scsi
    c3::lus2 connected configured unknown HP Ultrium 1-SCSI
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@4:scsi::lus2
    c3::rmt/0 connected configured unknown HP Ultrium 1-SCSI
    unavailable tape n /devices/pci@8,600000/pci@1/scsi@4:scsi::rmt/0
    c4 connected configured unknown
    unavailable scsi-bus n /devices/pci@8,600000/pci@1/scsi@5:scsi
    c4::lus3 connected configured unknown
    unavailable unknown n /devices/pci@8,600000/pci@1/scsi@5:scsi::lus3
    usb0/1 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-kbd n /devices/pci@8,700000/usb@5,3:1
    usb0/2 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:2
    usb0/3 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no cfg str descr>
    unavailable usb-mouse n /devices/pci@8,700000/usb@5,3:3
    usb0/4 empty unconfigured ok
    unavailable unknown n /devices/pci@8,700000/usb@5,3:4
    and inquire still shows
    [email protected]:TOSHIBA DVD-ROM SD-M14011009|CD-ROM
    [email protected]:ADIC FastStor 2 A12r|Autochanger (Jukebox)
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    [email protected]:HP Ultrium 1-SCSI E3 |Tape
    and then I reconnect the cable I saw a lot of error message in dmesg:-
    Jun 19 13:47:37 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:47:37 server Received unexpected SCSI Reset
    Jun 19 13:47:37 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:47:37 server Received unexpected SCSI Reset
    Jun 19 13:51:30 server scsi: [ID 107833 kern.notice] /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:30 server Failed to Get Features
    Jun 19 13:51:50 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:50 server ISP: Firmware cmd timeout
    Jun 19 13:51:50 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@4 (qus0):
    Jun 19 13:51:50 server Fatal error, resetting interface, flg 1
    and devfsadm hang. So I double check the past demsg and found a lot of similar SCSI error message as below:-
    Jun 19 13:43:12 server probe request for LUN 0 denied: max LUN -1
    Jun 19 13:43:12 server scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@5 (qus1):
    Is that represent a hardware failure either on the jukebox or the SCSI controller? Or it is indeed a software corruption that can only be solved by reinstallation? But unfortunately I don't have the media on hand.
    PS.a more details can be found under expert exchange thru the links below:-
    http://www.experts-exchange.com/OS/Unix/Solaris/Q_23413012.html#a21749881
    http://www.experts-exchange.com/OS/Unix/Solaris/Q_23478147.html

  • CS6 hangs when selecting the pencil tool

    CS6 hangs for about a minute when I select the pencil tool.  Everything just freezes up and then after about a minute I'm good to go.  I'm running Lion 10.7.3 with 12GB Ram.

    You have "standard" set as your curser preference. To change it Edit<Preferences<Display and Cursors.
    http://help.adobe.com/en_US/PhotoshopElements/7.0_Win/WSAF9F0406-654F-4770-913A-C56B7BFD60 BB.html

Maybe you are looking for

  • Does the dv6-6c20eo support SATA 3?

    I want to replace the slow 5400rpm mechanical hd with a faster SSD disk. I would be nice if it said somewhere if this computer support SATA3 or the slower SATA2.

  • Finishing from a digital source

    a friend of mine shot some footage using a still camera in photo-jpg. i'm on a pokey powerpc, so i transcoded the footage given to me to dv so i could work in real time(color correction, etc). i've got the cut, so now i have to finish this thing with

  • Error: Serious Error Please Help Somebody/anubody

    Hi, The below Text are the error im getting while using the jasper reports in my project. I have included all the libraries in my add library field in my net beans. Please help as soon as possible Thanking You R.Muthu Kumar type Exception report mess

  • Can't launch photoshop debug

    I'm trying to trick extension builder 3 under eclipse to work as a debug environment for photoshop cc 2014.  I followed the advice at Adobe Extension Builder and Creative Cloud 2014 to change path names etc. When I try to debug-as a photoshop extensi

  • Selection without selection bounds

    I'm using CS2 so I can't call on selection bounds (which seems to be the preferred method of working with selections) var sb = activeDocument.selection.bounds; var sbWidth = sb[2]-sb[0]; var sbHeight = sb[3]-sb[1]; alert(sbWidth + " , " + sbHeight) S