Aperture has lost the masters in my library,
I'm not aware I've done anything to lose them but they appear lost, where have they gone and how do I get them back?
This is very traumatic, I do havebackups of most but not all.
Thanks
Paula
I'd start by running the steps shown in Aperture 3: Troubleshooting Basics
How do you know that the masters are not referenced? If they are managed they should be i the Aperture library. If they are in a folder on the desktop that would seem to indicate that they are referenced.
Do the troubleshooting steps and post back if that doesn't fix the problem.
good luck
Similar Messages
-
Aperture has lost all my adjustments
aperture has lost all my adjustments from a project.. a weeks eyestraining work
Thanks for getting back to me.
Nothing to tell other than having worked very hard on a project shoot of 570 pics. Some, not all, of the pics have lost all the adjustments I individually applied. Cannot understand how that could happen.
I am using the library, on an external hard drive, that I always use.
If I had switched libraries, I would not be able to see the pics surely?
Thanks.. -
I updated to 10.6.8 and now my VPN connection is unstable. It has lost the connection to the host after 30 minutes on three different occasions. Before updating, I was able to be connected for hours with no interruption.
The error reads: "A configuration error occurred. Verify your settings and try reconnecting."
Adding to the problem is that the problem only corrects itself after I restart my computer.
Is anyone else having this problem? Is there a fix I should be looking for?
Thanks!I'm sorry I didn't post back earlier, I haven't been using my VPN lately. However, today, I did use it for hours and the problem persisted exactly as explained. I did some more searching and found the following solution on a similar thread. Worked like a charm:
the vpn daemon has to be restarted. after that it works perfectly.
1. Open Terminal
2. Unload the VPN daemon using the following command (for those who don't know, don't include the % sign when typing in Terminal):
% sudo launchctl unload /System/Library/LaunchDaemons/com.apple.racoon.plist
Note: After you type the command in, Terminal will give you a warning and ask you if you want to continue. Enter your password and continue.
3. Reload the VPN daemon in Terminal (again, not typing the % sign) :
% sudo launchctl load /System/Library/LaunchDaemons/com.apple.racoon.plist
That should do it! Thank you to everyone who tried to help me. Hopefully this helps others out there...
P.S. For those that are unfamiliar with terminal. When you type in the commands, that's not a hard return in there before the path /System/Library... etc. The line break is just because the path is too long to fit on that line.
See the other person's VPN problem thread here:
https://discussions.apple.com/thread/3173994?start=0&tstart=0 -
The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?
I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).
-
My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,
Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound. -
Magic mouse has lost the cursor
Magic Mouse scrolls and responds to clicks but has lost the cursor. Eating batteries very often as well, related issue?
This does happen occasionally when the batteries are low and the memory (RAM) is inadequate. This article may be helpful; read it and check it out.
http://osxdaily.com/2013/07/19/disappearing-mouse-cursor-mac-os-x/ -
My Mac has lost the keyboard command to zoom in and out (Apple/shift/ /-) How can I restore this?
try doing an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
also go into your keyboard options and make sure the settings are correct there. -
After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?
why did they erase something usefull and easy to use?
-
Hi...my movie project has lost the audio track. I can see it but nothing plays.
The movie record has its audio but the imported iTunes track is silent.This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.
-
My Firefox has lost the "go back to the previous site" arrow. PLEASE HELP
My Mozilla Firefox browser has lost the "back arrow" in the toolbar.
I have no way to go back to the previous website I visited.
PLEASE HELP.
THANKSIf the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
I have a Powerbook G4, from a friend but he has lost the disc,s in a house move, I have all Apps except Iphoto, and cannot transfer my photo's, what can I do. Running 10.5.8 Prachal
By all means get iLife but just for the record you don't HAVE to use Apple's photo application;
there are many more around, quite a lot of them free.
This http://download.cnet.com/mac/digital-photo-software/?tag=rb_content;main
is a good site to look through for candidates - some will be free some shareware and some paid for.
Alternatively Kodak provides free photo software - navigate through this site to what's right for you:
http://www.kodak.co.uk/ek/GB/en/Home_Main/Kodak_Store/Software.htm
I think its probably this one:
http://support.en.kodak.co.uk/app/answers/detail/a_id/16434/selected/true
Edit :Just remembered another site for you to explore:
http://www.macupdate.com/
Put "photo" in the search box..... -
Grep command has lost the "-P" option
The grep command has lost the "-P" option. It now supports a non-standard "-p" option that doesn't work on previous versions of OS X or Linux. It also doesn't support the long form version of "--perl-regexp". Any portable solutions?
In addition, the command line usage still shows "-P" as an option, but the man page doesn't list it.The grep command has lost the "-P" option. It now supports a non-standard "-p" option that doesn't work on previous versions of OS X or Linux. It also doesn't support the long form version of "--perl-regexp". Any portable solutions?
In addition, the command line usage still shows "-P" as an option, but the man page doesn't list it. -
Just downloaded the Maverick OS and ARCH...my image manager (for Advance Direct dashboard for website) has lost the Insert & Cancel buttons so I'm stuck in Image Manager without an option to move forward HELP!
HI,
You can order the HP Recovery Discs online or by calling HP Tech Support...Hp Recovery discs will not require any product keys..
Here is the link that will guide you to order the discs online..
Ordering your Recovery Discs!
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed. -
Some reason my computer has lost the iTunes
My computer has lost the iTunes, how do I reload iTunes onto my computer. There isn't even an icon for it
Try reinstalling iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/
Maybe you are looking for
-
How can I remove devises from my iCloud/apple account?
I just got divorced and need to remove her cell phone from my apple account. Any help would be appreciated.
-
Application hanging after commit issued, how to tell why?
Hi All, We're using adf bc, jsp's and jdev 10.1.2. The scenario is this.. I have 2 views based on the same entity(called Milk). One view is the control view Milk i.e. straightforward select, no where clause. The other one is based on a join with anot
-
Is there any way the apple store can transfer all of my music from one ipod to a new ipod?
i have an ipod touch and i want a new ipod classic but not all of my music is on my itunes library if i brought the itouch to the apple store could they transfer everything? thanks
-
Housebank and payment method for vendor
Hi While doing MIRO, i want housebank and payment method to populate from vendor master data. I maintained both these details in VM data but its not populating automatically in MIRO. Please help. (m using ECC 6) Sadhana
-
WORD document not showing up in Apple Recent Items Documents
I work on a certain WORD document every day, maybe serveral times a day. I edit it each time, making numerous cuts, copies, pastes and saves. I remember when I first got the computer, it would show up in my Apple list of recent documents and as such