Aperture Import Date Problem

I'm importing photos and have noticed repeatedly that when I tell it to automatically split projects, it's not breaking them in the right place. It would appear that all photos before 11am are thrown onto the previous date. I have played with (and double-checked) the time zones and they appear to be in sync.
Tonight, I have discovered a new wrinkle to this. I'm rebuilding my database and I knew this problem was happening, so I've been manually (ugh!) choosing each group and putting it in the proper place. Now, I can see that the above is still happening, but now it's doing this:
For example, I have 10 images showing up as January 1st. The first 5 are really January 1st, but the next 5 are January 2nd before 11am. I download the first 5 images to a January 1st folder and when I go back to import, the next 5 are NOW showing up as January 2nd as they should have to start with.
Has anyone else experienced a problem like this? I'm going SO crazy having to manually sort these in the right place. I'm on the first of 3 SD cards I need to import and it's going to be about 7 months of photos and 30gb of data. If anyone knows a solution, I'm all ears!
Oh, and I went to the genius bar last week about this with no luck. I'm hoping there's a solution out there now and that I don't have to just report it and wait for a bug fix...
Thanks!
MorrowClan

To be honest while its something you want to avoid if at all possible its not the end of the world. I've been forced to do it on a number of occasions and haven't had anything really bad happen. Do you have a recent backup? That helps to relieve the anxiety
If you do force quit it make sure the very next thing you do is run a library repair. Hold own the option and command keys while starting Aperture to get the repair window. Once that is done (and it may take a while to run) and Aperture comes up look for a project Recovered Photos (or something like that, its been a while since the last time its happened to me) . If that is there there were images in your library that the repair function found but couldn't figure out where they belonged. You'll need to sort them out yourself.
Again, if you haven;t already, start a good backup routine for your libraries. That will go a long way towards alleviating your stomach distress
good luck

Similar Messages

Excel import date problems

Please tell me why when I import dates from excel to P6 7.0 the current date not what is in the excel spreadsheet is what appears in P6. How do I fix this problem?

Are there any solutions to the data truncation/rounding problem?
I am trying to import Excel data into tables through SQL Developer and notice that the preview screen displays truncated/rounded numbers even after I have deliberately formatted the data in Excel as numbers in 3.2 format. Is there a workaround?
Thanks for any advice you can give.
Frank Eichel
Forest Inventory Analyst
Natural Resources Canada
Victoria, Canada

Import Date Problem

I recently installed iphoto 6. Previously when I imported photos they were automatically dated the date I imported them. Now the import date on all imports is January 1, 2003. It is a hastle to redate every roll I import. What can I do?
G4 Mac OS X (10.3.9)

ouman
Welcome to the apple discussions.
Try deleting the com.apple.iPhoto.plist file from, Home / Library/ Preferences and re-start the Application.
Regards
TD

Import data problem

Hi all,
when trying to import from an export file with rows previously exported from one database, the import process did not import the rows at all. Suspects that the constraint checking is imposed and thus disable them on the target db. but still unable to import the rows into the database. Have anyone came across such as manage to solve this...?? using 8.0.4 Thanks in advance.

clearly, constraint checking is imposed when import is being made, so that data rows are not successfully imported. Tried to disable constraints before import but still same problem.
Therefore what may be the solutions?
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by venuraja gopal rao ([email protected]):
specify your problem in detail and also clearly.<HR></BLOCKQUOTE>
null

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Problem in importing data in oracle 10g from 9i backup

Hi ,
Am trying to import data in oracle 10g..but it does not importing constraints, and stop doing anything by the msg.
About to enable constraints.....
after this msg it does not work.
plz help,
Regards,
Neha

Hi Neha,
You have a lot of options. I'll supose you can test first, and you're using an export file.
First forget about the data, think in your database structure. So you can do this:
exp userid=... file=exp_norows.dmp full=y rows=n statistics=none
Now you have the structure of your database. Create the database, in 10g, empty, check you have all filesystem, etc. for you new datafiles. And do the import with parameter ignore=y, you'll see a lot off errors on SYSTEM schema, don't worry about it.
Now you have the structure of you database in 10g. You can take a look in the import log file, looking for some possible errors come from your schemas. so check the objects, and check the schemas.
Bear in mind things like CONNECT role in 9i it's different in 10g, you can't create db_links in 10g with "IDENTIFIED BY VALUES" because you'll get an ORA-00600, etc.
Well, fix all problems on source database (9i) and repeate this procedure until you don't recieve any more errors (not a SYSTEM schema errors).
When you have everything solved, you can try to import the data.
I hope, this method can help you. If you have any problem do not hesitate to ask me.
John Ospino Rivas

HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

Importing data into an existing table from excel problem

Hopefully I am posting this in the right place..
I am having trouble importing data from Excel into an oracle table using the 'import data' wizard in SQL developer.
The problem is that the I want to import data into a table which all ready has data and I want the new data to be imported into the first row of the table not in a new row at the end of the table.
This is probably best shown by example:
create table todelete (
     site_no varchar2(2),
     data1 number,
     qa number);
insert into todelete values ('w1',1,null);
insert into todelete values ('w1',2, null);
insert into todelete values ('w1',3,null);
Now I want to import the following data from excel into the QA column starting at w1:
SITE_NO
QA
w1
4
w2
4
w3
4
However, when I import the QA column it goes into a new row:
SITE_NO
DATA1
QA
w1
1
NULL
w2
2
NULL
w3
3
NULL
NULL
NULL
4
NULL
NULL
4
NULL
NULL
4

The problem is that the I want to import data into a table which all ready has data and I want the new data to be imported into the first row of the table not in a new row at the end of the table.
No - the PROBLEM is that a table does NOT have a 'first' row or a 'row at the end of the table'.
Rows in a table are like balls in a basket; there is NO 'first' ball.
As already suggested please mark this thread ANSWERED and repost it in the sql developer forum where it belongs.

Aperture 3.3 problems RAW+JPG Import

After the update on Aperture 3.3 I have the following problem: Before import everything looks normal (see picture one). Aperture imports none jpg and Raw files as picture pairs and the Raw import looks completely colour-wrong. Moreover, there is no field more than Raw treatment
Any idea for solving this problem?

Also using a Panasonic (.RW2) I have had exactly the same problem, with exactly the same "colour effects". I did some varitions of importing and observed the following. The test shots were RAW only on a newly initialized SDHC card.
In the import dialog, if RAW only was selected, no previews were shown. Same if JPG only. If RAW & JPG selected, a preview was shown (even there were no jpgs on the card).
No presets, Auto Enhance and several others had no effect (i.e. same error).
The photos imported perfectly using iPhoto, and were then perfect in Aperture.
After thinking some, I suspect the preview image is the problem (I wished I'd exported them as tiff to see, but it was yesterday and I deleted the dodgy imports).
I had some pictures (also .RW2) not in the library at all (I'd been using them to try out LR4). I drag/dropped them from a Finder-folder into Aperture, (not import) by droppong them into the Inspector panael of Aperture; they were perfect BUT said they were RAW/JPG pairs which they were not.
Come on Apple. There was a time when your software was bug-free. Nostalga isn't enough.

Problem while importing data schema not found

Hi,
I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
Regards,
Abbasi

Hi,
Here is complete listing
bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39165: Schema XYZ was not found.
Regards,
Abbasi

Problem import data blackberry dekstop manager from 8900 to Z30

Hi,
My old bb is model 8900.
I have update bb dekstop manager 7 & try to switch data from bb 8900 to Z30 but it failed.
Then I try to downgrade version dekstop manager but it also fail to import data to my new bb.
The dekstop manager cannot connected with my bb & hang..
Please help me!
Solved!
Go to Solution.

Hi and Welcome to the Community!
The Desktop Software is not capable of working with the new BB10 devices...you must use LINK:
http://us.blackberry.com/support/transferring-to-bb10-device.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem Importing Data from Raiser's Edge into Crystal Reports

This is likely going to be a very simple one for the expert community. I am a novice Crystal Reports user. We received our license for the app bundled with the Raiser's Edge donation tracking software.
In previous versions of Crystal, when importing data from a Raiser's Edge export, the default method of data linking was a Left Outer Join.
However, for the latest version, it appears this has defaulted to using an Inner Join, which does not display data the way we'd like it to in our reports.
The fix we use right now (supported by Raiser's Edge support team) is simply to go in and manually adjust all of the reports table links. This can be time-consuming, however.
I would like to know if there is a way to get Crystal to import, by default, using something other than an Inner Join. Simply using the Add Command when importing the data isn't an ideal option as building a custom SQL query each time is about as time-consuming as manually changing each of the links via the Crystal GUI. (part of the reason this would be so time-consuming is that the Raiser's Edge database tables aren't intended to be directly interacted with by the end-user, so getting the information on what table names would be in play is a bit of a process).
The version of Crystal we are running is: 11.0.0.1282, Crystal Standard.
Please let me know if I've left off any vital information needed to help with this query. I'll do my best to fill in any gaps I may have left here.

Hi Michael,
Raiser's Edge db is not ideally supported with Crystal Reports.However, what you may try as of now,is to upgrade the application to release 2 and then check for the results.
Following is the link:
http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CRXIR2
Please choose the "Service Pack 2 - Full build - ZIP - 1.03 GB - released April 2007" hyperlink.
The same keycode will work for this version also.
Thanks
Prathamesh

Writing GPS data to Exif after aperture import cause lost faces information

i want my GPS informations to be hard written to RAW files (with ExifTool)
if i hard geotag my images after aperture import and faces recognition i loose faces information and i have to redone the job.
bummer ....
apertur should provide such a functionnality

i want my GPS informations to be hard written to RAW files (with ExifTool)
if i hard geotag my images after aperture import and faces recognition i loose faces information and i have to redone the job.
bummer ....
apertur should provide such a functionnality

Will Aperture Import Metadata from Windows?

I have been using Windws Live Photo Gallery to edit and organize a library of about 100k JPGs. I have added faces, GPS, Keywords, ratings, and captions to the pitcures. All of this information is stored in the metadata of each picture.
I have used iPhoto in the past and would like to move back to my Mac for editing/organizing my library. If my memory is correct, iPhoto only really imprts the keywords and GPS data, not the ratings or captions.
Does Aperture import more of the metadata?
Also, does Aperture support expoting the metadata (Keywords, Ratings, GPS) to the file? I seem to recall iphoto allows you to export the keywords and GPS, but not the ratings.
I was thinking that if iPhoto nor Aperture does not import/export ratings, I could do a work around by selecting my photos by rating and then just add keywords based on those ratings. (one-star, two-star, etc). I could then do a reverse process in Aperture/iPhoto... Select the keywords and then give the photos the ratings.
Am I making any sense?
Mike
BTW, I am using an older 27" iMac i7 with 8GB... Need to update my profile.

Hi Mike. I don't know the answer to your larger question (though you might try with a few images and see what you get). I do know that what you propose here:
Mike Delaney wrote:
I was thinking that if iPhoto nor Aperture does not import/export ratings, I could do a work around by selecting my photos by rating and then just add keywords based on those ratings. (one-star, two-star, etc). I could then do a reverse process in Aperture/iPhoto... Select the keywords and then give the photos the ratings.
works, and works well. I have done this a few times (for ratings as well as for color labels and for other groupings). In practice, it goes quickly. Every "tag" of information that you can translate to a keyword will be preserved, and within the limits of the "moving to" software can be re-assigned.
(Don't get fancy with a keyword outline, though: Aperture flattens any keyword outline on import and leaves you with a simple single-level list of keywords. You can't group your keywords, but with clever naming: e.g. "StarOne", "StarTwo", "StarThree", you can at least have these show next to each other in an alpha-sorted list. Similarly, "ColorRed", "ColorBlue", etc. Although I've not seen any problems recently, I still avoid non alpha-numeric characters, including {space}.)

Aperture Import Date Problem

Similar Messages

Maybe you are looking for