Aperture Import Extremely Slow

Hi all,
I recently inherited an iPad from my dad, and before I could erase and sync it with my computer I had to get all the photos off. There are about 10 GB worth of photos on the iPad, so I understand why that would go slow. But I checked, and an event which had seven pictures in it took close to 30 minutes. Any ideas?
-Torin

I would have plugged-in first (with its authorized computer), then went to the photo tab and unchecked the sync button..ie, sync no photos.

Similar Messages

  • R12.1.2/11.1.0.7 PO Import extremely Slow

    Hi All
    We are struggling with performance on a 100,000 PO import using POXPOPDOI (Standard Purchase Order Import program) on R12.1.2 and 11.1.0.7 (HP-UX 16GB 2 x Intel(R) Itanium 2 9100 series processors (1.67 GHz, 18 MB) B.11.31.
    I know it’s a lot of PO’s to import and the PO Import process has always been slow, but 3 days to import 100,000 records is a bit over the top, to say the least. POXPOPDOI is a single threaded process. The PO’s are all open PO’s and have to be loaded prior to go-live. I know not why.
    Anyone else having similar issues ? We have tried running with smaller batches, it's slightly faster but not fast enough.
    Thanks
    Dave

    Can you enable trace to see what the performance issue is ? Pl see these MOS Docs
    R12 : POXPOPDOI: Interface : Performance Issue (Doc ID 564140.1)
    https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=564140.1&h=Y
    Performance Issue When Importing Hundreds Of Purchase Orders (Doc ID 568042.1)
    https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=568042.1&h=Y
    How To Diagnose Problems With Importing Standard Purchase Orders (Doc ID 781351.1)
    https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=781351.1&h=Y
    HTH
    Srini

  • Import extremely slow from 9i to  10G

    I am preparing a 10.2.0.4 database for testing, (upgrading from 9i) because we are also moving to a new server, I am going to use the exp/imp method. I created a new database after installing and patching the software, then created the necessary tablespaces and users before using imp on the last export taken from the 9i database. Also turned off archive logging for the sake of importing an testing.
    This is usually not the fastest process, the dump file is 13gb from the 9i DB, but when I refresh 9i test or dev databases quite often using the same method and do not experience the slowness I am seeing right now in 10G. It has been running for almost 8 hours on one table, which has just over 4 million rows in it, no blob, lob etc.. columns, and nothing of note in the alert log.
    9i database is on Windows 2000 advanced server, 10G is on windows 2003 server with plenty of horsepower and RAM, but the cpu is never over 1-3% used
    Any ideas here?

    Hi,
    Try this:
    1- Analyze only after import (Analyze=n)
    2 -Have de dump to import on a different disk than the DB files.
    3- Use commit=n
    4- Use only a big rollback segment and put the others offline during the import
    5- USe indexes=n and create them after import had finish
    6- Use a big buffer during import, example:
    (import option - time sec - Improvement %)
    commit=y - 120 - 0
    commit=y,buffer=64000 - 100 - 17%
    commit=n,buffer=30720 - 72 - 40%
    commit=n,buffer=64000 - 67 - 44%
    7- Pre-create tables before with scripts and use ignore=y
    8- use bigger db_cache_size and log_buffer parameters
    9- stop archive generation, (ALTER DATABASE NOARCHIVELOG;)
    After import is finish, don't forget create all indexes and generate new statistics.
    Regards,
    Francisco Munoz Alvarez.

  • Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

    After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

    Download LR 5.3 and install it
    By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

  • Fuji x-trans raw files import extremely slow

    WIn 7 pro 3.6 AMD quad core 16 gb ram 1.2 tb raid 0 WD Velociraptor drives. Lightroom 5.6
    I have a fairly quick system and my 24mp Sony raw files import and render full sized previews reasonably quickly -but it takes about 5x longer for my Fuji X-T1 raw files to import and render full size previews.  If I import into Capture One Pro 7 or 8 or into Photo Ninja both the Sony and the Fuji files import and render previews quickly. It is only Lightroom that is so incredibly slow with the Fuji raw files.
    I have used LR since version one and my files have always imported reasonably fast , however, the Fuji raw files have been slow to import from the very first import.  Ex - yesterday I imported 312 raf files (Fuji raw files) and it took 31 minutes to complete. I also imported 257 Sony raw files and the import  plus full sized preview rendering was completed in just under 5 minutes.
    Am I missing something in the preferences or import workflow?
    Thanks for any help
    BOb

    Thanks for the quick reply! :-)
    The setup is identical as when I work with my Nikon-files; I always start by "manually" copy the files from the memorycard to correct location/disk.
    In LR I use the "Add" option when I import to my catalog, so the file transfer is not part of the equation....
    Even the large files from Nikon D810 is faster to "add" than the files from the X-T1.
    But, as you write, it might come down to X-Trans-files (RAF) is not as optimal for Adobe processing as the Nikon raw files (NEF)...
    M.

  • Importing extremely slow

    I'm trying to import several audio books on my mom's computer. It has Windows 7 and I've upgraded to the latest version of itunes. It is taking a full minute per TRACK, so about 15 minutes total per CD. At this rate it will take me all night! Error correction is unchecked. It's currently set to AAC Encoder, if that helps.

    Download LR 5.3 and install it
    By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

  • Why is Aperture 3 sooooo slow?

    Let me first say I just started using Aperture 3 after using Photoshop/Lightroom for years and so far over all I LOVE it.
    However I'm finding it to be extremely slow at processing images.
    I made a default preset in adjustments that I would like to use on all of my images in a folder. So I lift the settings off one picture and then stamp them to the rest of the photos. (I suppose I could just highlight them all and apply the preset also?) A folder of pictures I'm working on now has 432 pictures and it will take over an HOUR.
    This same process in Lightroom using synchronize would take a minute or so at the most. Often times in lightroom I would like to make a change to a picture and apply it to more pictures, which takes seconds. How can I possibly get anything done when I have to wait forever for it to process settings in Aperture?
    I've tried disabling certain things like faces, installed the newest update, but its not making a difference.
    This is an amazing program, but this is just ridiculously slow.
    Any help would be appreciated, but I have a feeling not much can be done. I figured I'd ask anyway
    Thanks

    TheCipher wrote:
    I tried everything suggested, still no luck. Slow as ever.
    A simple -.5 contrast adjustment to 400 pics takes an hour, in Lightroom it would be seconds. I just don't get it.
    Not sure what to make of that. It should not take an hour (perhaps a couple of minutes).
    My understanding of how Aperture works is this:
    1 - Import images > Thumbnails and Previews created for each image > completed Preview for the first Version is ready to work on once loaded in viewer.
    2 - The process of creating the first Version and it's attendant Preview was achieved by reading the Master > applying the Apple recommended 'RAW Fine Tuning' settings (or using the JPEG information if JPEG Masters) > rendering the settings into the first Version (at this point you have the edit list file - 'XMP'? - in the database for this Version).
    3 - When you make an adjustment, you are writing to the edit list file, which Aperture then uses to re-render the Version image.
    Although this takes obvious processor power, I am not sure why the big difference between programs for you. I believe Adobe uses the processing pipeline a bit differently (although I am not sure whether they write to the edit list file in the database, or use a cache based system like Bridge).
    In Aperture, since you are writing to the edit list, you are saving in real-time. When you export, you flatten the file for final use.
    Sorry I could not help more. Good luck.

  • My macbook pro (late 2011) is extreme slow, freezing, crashing and lagging too often.

    I am new to the forum, I hope this is the good topic to post my problem.
    I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
    My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
    Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
    Thank you in advance!
    (and sorry for my english - it is not my mother language)
    EtreCheck version: 2.1.2 (105)
    Report generated 2014. december 11. 12:59:29 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      10 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1280 x 800
      SyncMaster 1680 x 1050 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:55:58
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      StoreJet Transcend StoreJet Transcend 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 67
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Applications/KeyRemap4MacBook.app
      [loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
      /Applications/PMHMac.app
      [not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
      /Applications/Toast 11 Titanium/Spin Doctor.app
      [not loaded] com.hzsystems.terminus.driver (4) [Support]
      /Applications/Toast 11 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      /Library/Extensions
      [not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
      /Library/StartupItems/DoubleCommand
      [not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
      /System/Library/Extensions
      [loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) [Support]
    Startup Items: ℹ️
      DoubleCommand: Path: /Library/StartupItems/DoubleCommand
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
      [failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
      [running] com.bjango.istatmenusagent.plist [Support]
      [running] com.bjango.istatmenusnotifications.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.sony.SonyAutoLauncher.agent.plist [Support]
      [loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
      [failed] XR_3045NI_Startup_Fax.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.bombich.ccc.plist [Support]
      [loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
      [running] com.spotify.webhelper.plist [Support]
      [running] homebrew.mxcl.mysql.plist [Support]
    User Login Items: ℹ️
      Flux Alkalmazás (/Applications/Flux.app)
      iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
      Caffeine Alkalmazás (/Applications/Caffeine.app)
      Google Drive Alkalmazás (/Applications/Google Drive.app)
      Dropbox Alkalmazás (/Applications/Dropbox.app)
      DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
      RescueTime UNKNOWNHidden (missing value)
      Alfred 2 UNKNOWN (missing value)
      SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
      Skype Alkalmazás (/Applications/Skype.app)
      uTorrent Alkalmazás (/Applications/uTorrent.app)
      Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
    Internet Plug-ins: ℹ️
      nplastpass: Version: 2.0.11 [Support]
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      ViewRightWebPlayer: Version: 3.5.0.0 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      ResponsiveResize
      Save to Pocket
      Awesome Screenshot
      LastPass
      feedly
    3rd Party Preference Panes: ℹ️
      Double Command  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Growl  [Support]
      Java  [Support]
      MacFUSE (Tuxera)  [Support]
      Perian  [Support]
      Xmarks for Safari  [Support]
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
      Destinations:
      Transcend 2TB [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 367.91 GB X 3)
    Top Processes by CPU: ℹ️
          21% WindowServer
          12% Console
          8% parentalcontrolsd
          6% backupd
          6% Activity Monitor
    Top Processes by Memory: ℹ️
      462 MB mysqld
      290 MB mds_stores
      290 MB Safari
      204 MB Finder
      183 MB WindowServer
    Virtual Memory Information: ℹ️
      2.20 GB Free RAM
      6.06 GB Active RAM
      809 MB Inactive RAM
      1.66 GB Wired RAM
      1.87 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
      Dec 11, 2014, 12:04:08 PM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

    Dear Apple Support Community.
    As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
    I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
    For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
    Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
    So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
    Hardware Information:
    iMac (24-inch, Early 2009)
    iMac - model: iMac9,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
    8 GB RAM
    Video Information:
    ATI Radeon HD 4850 - VRAM: 512 MB
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 1.9 - SDK 10.9
    AppleAVBAudio: Version: 2.0.0 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
    OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
    Disk Information:
    WDC WD1001FALS-40K1B0 disk0 : (1 TB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    OPTIARC DVD RW AD-5670S 
    USB Information:
    Apple Inc. Built-in iSight
    Canon CanoScan
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    WD My Passport 071D 800mbit - 800mbit max
    EFI (disk1s1) <not mounted>: 209.7 MB
    disk1s2 (disk1s2) <not mounted>: 2 TB
    Boot OS X (disk1s3) <not mounted>: 134.2 MB
    Thunderbolt Information:
    Kernel Extensions:
    com.f-secure.kext.fsauth          (1.0.0d1)
    Problem System Launch Daemons:
    [failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
    Problem System Launch Agents:
    Launch Daemons:
    [loaded] com.adobe.fpsaud.plist
    [invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
    [loaded] com.f-secure.fsavd.dbhelper.plist
    [loaded] com.f-secure.fsavd.plist
    [loaded] com.f-secure.fsmac.firewall.plist
    [loaded] com.f-secure.fsmac.fsupdated_guts2.plist
    [loaded] com.f-secure.fsmac.licensetool.plist
    [loaded] com.macpaw.CleanMyMac2.Agent.plist
    Launch Agents:
    [loaded] com.babylon.activation.plist
    [loaded] com.bjango.istatlocal.plist
    [loaded] com.f-secure.relauncher.plist
    [loaded] com.f-secure.trasher.plist
    User Launch Agents:
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.google.keystone.agent.plist
    [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
    [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
    [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
    User Login Items:
    iTunesHelper
    Dropbox
    F-Secure Anti-Virus for MAC
    3rd Party Preference Panes:
    Flash Player
    Internet Plug-ins::
    FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
    AdobePDFViewer: Version: 11.0.04 - SDK 10.6
    DivXBrowserPlugin: Version: 2.1
    Flash Player: Version: 11.9.900.170 - SDK 10.6
    OfficeLiveBrowserPlugin: Version: 12.2.8
    Google Earth Web Plug-in: Version: 6.1
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins::
    Picasa: Version: 1.0
    Bad Fonts:
    None
    Old applications:
    None
    Time Machine:
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
    Destinations:
    XooS5 TM [Local] (Last used)
    Total size: 2 
    Total number of backups: 32
    Oldest backup: 2013-09-15 01:11:39 +0000
    Last backup: 2013-12-07 12:48:45 +0000
    Size of backup disk: Too small. Backup size 2  < (Disk used 753.90 GB X 3)
    Time Machine details may not be accurate. All volumes being backed up may not be listed.
    REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
    Top Processes by CPU:
    5%          backupd
    5%          Mail
    5%          WindowServer
    3%          Finder
    3%          Dropbox
    Top Processes by Memory:
    1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
    82 MB          Finder
    74 MB          Mail
    49 MB          softwareupdated
    49 MB          Dropbox
    Virtual Memory Statistics:
    97 MB          Free RAM
    1.21 GB          Active RAM
    1.19 GB          Inactive RAM
    1.21 GB          Wired RAM
    1.83 GB          Page-ins
    36 MB          Page-outs
    Please find now some additional measurements collected with iStat while running EtreCheck:
    Practically:
    The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
    Aperture has becomre to slow to be useable
    If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
    Conclusions
    From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
    Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
    The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
    Intended action plan
    Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
    Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes  and DVD player.
    In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
    Yours sincerely
    Core

    ... what anti-virus would you recommend using?
    Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Disable Java in Safari > Preferences > Security.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

    Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
    Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
    Any idea what could be causing this???  I was told that to many pictures slow down the system, I have only 700 pic on file

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Disk access extremely slow after 10.5.2 Update

    I did the update to 10.5.2 today.
    1. I tried to update via Software Update. The update started but then stopped with an Error message (Contact Support) and the system freezed. There was just the spinning wheel on blue background for more than one hour. No more harddisk activity. I finally rebooted (hard way). After a reboot I had a somehow upgraded system. But many things did not work anymore (most applications crashed, mail could not access keychain items anymore, etcpp)
    2. Then I downloaded the complete Update package to do a manual update (happily firefox still worked). After a manual install it worked. It installed fine and rebooted. Now everything works as it should with the only problem that everything is extremly slow. Starting an application lasts about double the time as normal, loading files takes 3 to 4 times more time than with 10.5.1
    To fix these issues I tried several things:
    - Fixed permissions
    - Cleared all cache files and forced system to rebuild them
    - Severall reboots
    - Waited until backup completed and Spotlight index was rebuilt
    Bootup time is now fine (more or less). Just a little slower than 10.5.1. Application start is still slow but better. But the file access is still extremly slow. This can be observed very well in Parallels which still works fine, but needs 3 to 4 times longer to start (so do all applications within parallels). I checked CPU (Activity Monitor) but could not see anything special.
    Any ideas what could be the reason for this behaviour and (more important) how to possibly fix this? I'm thinking about going back to 10.5.1 with time-machine and then try it again with the package install.
    Any help/ideas would be appreciated.

    Is it slow wireless LAN behavior affecting Time Machine? Check out the third page of this thread, specificallly the post by John Albergo about "delay_ack."
    http://discussions.apple.com/thread.jspa?threadID=1394485&start=30&tstart=0
    It helped me a lot.

  • Extremely slow wireless printing with HP Photosmart Premium C309g-m

    I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
    If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
    Printer: HP Photosmart Premium C309g-m
    Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
    OS: Mac OS X 10.6.2 with all available updates installed
    Computer connection method: Wired Ethernet connection to wireless router
    Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
    Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
    Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
    IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
    The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
    Attempted remedies:
    1. Rebooting and powering off, waiting, powering on computer
    2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
    3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
    None of these worked.
    This question was solved.
    View Solution.

    I don't think there is anything wrong with the DSL modem HW.  There might be an issue with how print data is being routed though.
    Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page.  Open the printer's internal web page by browsing to its IP address.  Select Networking and then Wireless (802.11).  Under the IPv4 Configuration tab, select Manual IP:
    For Manual IP Address, use the existing printer IP address.
    For Manual Subnet Mask, use 255.255.255.0
    For Manual Default Gateway, leave blank.  This is important.
    Select Manual DNS Server:
    Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty.  This is important.
    Press Apply.
    Turn off the DSL modem, the printer and all computers connected to your network.  Wait 60 seconds then turn on the DSL modem and then turn on the printer.  Then turn on the computers.  See if this corrects the printing speed.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Macbook Pro running extremely slow since updating to Yosemite

    Hello All,
    I am new to the community and I'm hoping your pooled expertise can assist me with my issues. I went ahead and posted the results of my diagnostic scan below. My main concerns are that my Macbook Pro is now extremely slow after OSX updates. Also, laptop is running extremely hot to touch. I have mentioned other ongoing issues. I offer thanks in advance for any assistance.
    Problem description:
    Macbook Pro 13":
    Purchased in mid-2010.
    Most Recent Issue (Main Concern):
    (1) I recently updated OS X from Mountain Lion to Maverick. Computer began running extremely slow and “jerky.”
    (1.1) Shortly after this I updated to OS X Yosemite. Computer runs, and types, even slower than before.
    Ongoing Issues (Greater than one year):
    (1) Extremely short battery life (may last two hours on full charge)
    (2) Macbook runs extremely hot to touch (fan runs continuously but can’t begin to keep it cool)
    (3) SD Card reader doesn't recognize/open an SD card when inserted.
    Lex Cschellings Requested the Following:
    No obvious elements in the list.
    This may well be a dying disk and/or a very bad battery.
    Do following:
    make a new etrecheck list and in the problem description put what Applications->Utilities->SystemInformation says about the battery (under the Power heading in the left panel): give cycle count and battery condition.
    Then post the link in a new thread.
    In the meantime the crash report is probably a French Dictionary issue (font? garcon garçon) you have installed, uninstall that and see if it happens again.
    Lex
    Battery Information is as follows:
    Battery Information:
      Model Information:
      Serial Number: W00324SYZD3LA
      Manufacturer: SMP
      Device Name: bq20z451
      Pack Lot Code: 0
      PCB Lot Code: 0
      Firmware Version: 201
      Hardware Revision: 000a
      Cell Revision: 165
      Charge Information:
      Charge Remaining (mAh): 3205
      Fully Charged: No
      Charging: No
      Full Charge Capacity (mAh): 4350
      Health Information:
      Cycle Count: 987
      Condition: Normal
      Battery Installed: Yes
      Amperage (mA): -2489
      Voltage (mV): 11143
    EtreCheck version: 2.1.5 (108)
    Report generated January 4, 2015 at 11:09:57 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 1:57:26
    Disk Information: ℹ️
      ST9250315ASG disk0 : (250.06 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Untitled (disk0s2) / : 249.20 GB (85.96 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
    [killed]      com.apple.CallHistoryPluginHelper.plist
    [killed]      com.apple.coreservices.appleid.authentication.plist
    [killed]      com.apple.sbd.plist
    [killed]      com.apple.spindump_agent.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
    [killed]      com.apple.AssetCacheLocatorService.plist
    [killed]      com.apple.ctkd.plist
    [killed]      com.apple.icloud.findmydeviced.plist
    [killed]      com.apple.ifdreader.plist
    [killed]      com.apple.MobileFileIntegrity.plist
    [killed]      com.apple.nehelper.plist
    [killed]      com.apple.softwareupdate_download_service.plist
    [killed]      com.apple.softwareupdated.plist
    [killed]      com.apple.tccd.system.plist
      [killed]      com.apple.wdhelper.plist
    [killed]      com.apple.xpc.smd.plist
      11 processes killed due to memory pressure
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.google.Chrome.framework.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Google Drive Application (/Applications/Google Drive.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 10.1.7 [Support]
      AdobePDFViewer: Version: 10.1.7 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Google Earth Web Plug-in: Version: 7.0 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% ARM
          5% Google Chrome
          2% launchservicesd
          0% AppleSpell
          0% WindowServer
    Top Processes by Memory: ℹ️
      90 MB Google Chrome
      38 MB Google Chrome Helper
      21 MB mds
      17 MB WindowServer
      17 MB System Information
    Virtual Memory Information: ℹ️
      25 MB Free RAM
      952 MB Active RAM
      944 MB Inactive RAM
      578 MB Wired RAM
      9.26 GB Page-ins
      278 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 3, 2015, 09:13:10 PM Self test - passed

    Lex,
    I'm not sure if I did this correctly, or if posting this is what you meant, but here is the DriveDX Health report.
    ### SYSTEM INFORMATION ###
    Report Timestamp                     : January 6, 2015 3:09:15 PM CST
    Report Timestamp (ISO 8601 format)   : 2015-01-06T15:09:15
    Application Name                     : DriveDx
    Application Version                  : 1.3.0.444
    App SubBuild                         : 0
    Application Edition                  : 1
    DriveDx Knowledge Base Revision      : 1/1
    Computer Name                        : <BLOCKED>
    Host Name                            : <BLOCKED>
    IP Address                           : <BLOCKED>
    Computer Model                       : MacBookPro7,1
    OS Boot Time                         : 2015-01-06T13:54:46
    Time Since Boot                      : 01h 14m 29s
    OS Name                              : Mac OS X
    OS Version                           : 10.10.1
    OS Build                             : 14B25
    OS Kernel Version                    : Darwin 14.0.0
    ATA Command Support Tolerance        : verypermissive
    N of drives with S.M.A.R.T support   : 1
    ### DRIVE 1 OF 1 ###
    Last Checked                         : January 6, 2015 2:59:53 PM CST
    Last Checked (ISO 8601 format)       : 2015-01-06T14:59:53
    Advanced SMART Status                : OK
    Overall Health Rating                : GOOD 100%
    Overall Performance Rating           : GOOD 100%
    Issues found                         : 2
    Serial Number                        : 5VCK3CCN
    WWN Id                               : 5 000c50 029e6a4c3
    Volumes                              : Untitled
    Device Path                          : /dev/disk0
    Total Capacity                       : 250.1 GB (250,059,350,016 Bytes)
    Model Family                         : Seagate Momentus 5400.6
    Model                                : ST9250315ASG
    Firmware Version                     : 0008APM2
    Drive Type                           : HDD 5400 rpm
    Power On Time                        : 7,694 hours (10 months 20 days 14 hours)
    Power Cycles Count                   : 4,772
    Current Power Cycle Time             : 1.2 hours
    === DEVICE CAPABILITIES ===
    S.M.A.R.T. support enabled           : yes
    DriveDx Active Diagnostic Config     : Seagate HDDs config [hdd.seagate]
    Sector Logical Size                  : 512
    Sector Physical Size                 : 512
    Physical Interconnect                : SATA
    Removable                            : no
    Ejectable                            : no
    ATA Version                          : ATA8-ACS T13/1699-D revision 4
    SATA Version                         : SATA 2.6, 1.5 Gb/s
    Attributes Data Structure Revision   : 10
    SMART Command Transport (SCT) flags  : 0x103f
    SCT Status supported                 : yes
    SCT Feature Control supported        : yes
    SCT Data Table supported             : yes
    Error logging capabilities           : 0x1
    Self-tests supported                 : yes
    Offline Data Collection capabilities : 0x73
    Offline Data Collection status       : 0x0
    Auto Offline Data Collection flags   : 0x0
    Bay #                                : 1
    I/O Path                             : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice
    [Known device                       ]: yes
    [Drive State Flags                  ]: 0xc0000000
    [Last State Change Timestamp        ]: 2015-01-06T14:52:48
    [Last State Change Flags            ]: 0x40000000
    [Last State Change Diff Flags       ]: 0x1
    === CURRENT POWER CYCLE STATISTICS ===
    Data Read                           : 2.2 GB
    Data Written                        : 768.4 MB
    Data Read/Write Ratio               : 2.91
    Average Throughput (Read)           : 2.6 MB/s
    Average Throughput (Write)          : 865.2 KB/s
    Operations (Read)                   : 43,921
    Operations (Write)                  : 28,114
    Operations Read/Write Ratio         : 1
    Throughput per operation (Read)     : 52.2 KB/Op
    Throughput per operation (Write)    : 28.0 KB/Op
    Latency Time (Read)                 : 0 ns
    Latency Time (Write)                : 0 ns
    Retries (Read)                      : 0
    Retries (Write)                     : 0
    Errors (Read)                       : 0
    Errors (Write)                      : 0
    === PROBLEMS SUMMARY ===
    Failed Indicators (life-span / pre-fail)  : 0 (0 / 0)
    Failing Indicators (life-span / pre-fail) : 0 (0 / 0)
    Warnings (life-span / pre-fail)           : 2 (2 / 0)
    Recently failed Self-tests (Short / Full) : 0 (0 / 0)
    I/O Errors Count                          : 0 (0 / 0)
    Time in Under temperature                 : 0 minutes
    Time in Over temperature                  : 0 minutes
    === IMPORTANT HEALTH INDICATORS ===
    ID  NAME                                         RAW VALUE            STATUS
      5 Reallocated Sector Count                     0                    100% OK
    197 Current Pending Sectors Count                0                    100% OK
    198 Offline Uncorrectable Sector Count           0                    100% OK
    199 UDMA CRC Error Count                         20,154               100% Warning
    === TEMPERATURE INFORMATION (CELSIUS) ===
    Current Temperature                  : 31
    Power Cycle Min Temperature          : 29
    Power Cycle Max Temperature          : 34
    Lifetime Min Temperature             : 0
    Lifetime Max Temperature             : 46
    Recommended Min Temperature          : 3
    Recommended Max Temperature          : 62
    Temperature Min Limit                : 0
    Temperature Max Limit                : 65
    === DRIVE HEALTH INDICATORS ===
    ID   | NAME                                        | TYPE      | UPDATE | RAW VALUE        | VALUE | THRESHOLD | WORST | STATUS      
       1   Raw Read Error Rate                           Life-span   online        0x173A0E        120           6     99     100%  OK         
       3   Spin Up Time                                  Pre-fail    online           0            100           0     99     100%  OK         
       4   Start Stop Count                              Life-span   online         5,034           96          20     96    95.0%  OK         
       5   Reallocated Sector Count                      Pre-fail    online           0            100          36    100     100%  OK         
       7   Seek Error Rate                               Pre-fail    online       0x5391F35         79          30     60     100%  OK         
       9   Power On Hours                                Life-span   online         7,694           92           0     92    92.0%  OK         
      10   Spin Retry Count                              Pre-fail    online           0            100          97    100     100%  OK         
      12   Power Cycle Count                             Life-span   online         4,772           96          20     96    95.0%  OK         
    184   End-to-End Error                              Life-span   online           0            100          99    100     100%  OK         
    187   Reported Uncorrect                            Life-span   online           0            100           0    100     100%  OK         
    188   Command Timeout                               Life-span   online      0x500050192       100           0     94     100%  OK         
    189   High Fly Writes                               Life-span   online           0            100           0    100     100%  OK         
    190   Airflow Temperature Celsius                   Life-span   online           31            69          45     56    43.6%  OK         
    191   G-Sense Error Rate                            Life-span   online          239           100           0    100     100%  OK         
    192   Power-Off Retract Count                       Life-span   online         3,162           99           0     99    99.0%  OK         
    193   Load Cycle Count                              Life-span   online        720,544           1           0      1     1.0%  Warning    
    194   Temperature (Celsius)                         Life-span   online           31            31           0     44    31.0%  OK         
    195   Hardware ECC Recovered                        Life-span   online        0x173A0E         50           0     43    50.0%  OK         
    197   Current Pending Sectors Count                 Life-span   online           0            100           0    100     100%  OK         
    198   Offline Uncorrectable Sector Count            Life-span   offline          0            100           0    100     100%  OK         
    199   UDMA CRC Error Count                          Life-span   online         20,154         200           0    199     100%  Warning    
    254   Free Fall Sensor                              Life-span   online         2,441            1           0      1     100%  OK         
    === DRIVE ERROR LOG ===
    error log is empty
    === DRIVE SELF-TEST LOG ===
    #   | LIFETIME (H)   | TEST TYPE         | PROGRESS | STATUS                          | LBA of 1st error
    1          7694        Short offline         100%     Completed without error              -    

  • Mavericks extremely slow on MacBook Pro Mid-2010

    Hi all,
    Since i installed Mavericks its been impossible to work on my Mac. I've already done a clean install and no signs of improve.
    I use Eclipse IDE to work, and its extremly slow now. Even can have some video playing on Youtube without some cuts when working.
    What should i do? Downgrade to ML? Sell this laptop? Buy new RAM?
    I've attached below the EtreCheck.... i don't know if theres something on my OS that may be causing this.
    PS: ....and the OS already indexed all the files.
    Big thanks for any help given.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 22:23:30
    Disk Information:
              Hitachi HTS545025B9SA02 disk0 : (250,06 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 249,2 GB (211,39 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Microsoft Microsoft® Nano Transceiver v2.0
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
    Launch Agents:
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
    User Login Items:
              iTunesHelper
              Dropbox
              uTorrent
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins::
              FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
              Flash Player: Version: 11.9.900.152 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              Default Browser: Version: 537 - SDK 10.9
    Bad Fonts:
              None
    Old applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          mds
                   3%          STS
                   2%          EtreCheck
                   1%          WindowServer
                   0%          DashboardClient
    Top Processes by Memory:
              479 MB          STS
              123 MB          softwareupdated
              106 MB          Safari
              86 MB          Finder
              61 MB          Skype
    Virtual Memory Statistics:
              91 MB          Free RAM
              1.23 GB          Active RAM
              1.14 GB          Inactive RAM
              502 MB          Wired RAM
              5.31 GB          Page-ins
              1.18 GB          Page-outs
    Best,
    Paulo Seixas    

    First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I have iMac and need a good photo editing program to use.  Reviews say aperture runs really slow with Lion, any suggestions?

    I need a program where I can remove objects and touch up dead grass, etc.

    Reviews say Aperture runs really slow with Lion, any suggestions?
    To add on to Corky02 answer:
    The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
    Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing  the original image files over the network, insufficient RAM, or corrupted or  ill-designedAperture databases.
    Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also  repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
    To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
    But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
    Regards
    Léonie

Maybe you are looking for