Aperture import stopped working?

I have used Aperture for about a year now and love it. Never really had much of a problem with it. I recently went to add photo's from my Rebel XT's CF card and it popped up like normal. I selected the photo's from the card to import and told it was folder to add it too. Everything took a few minutes as usual then showed it was import all the photo's BUT they were not in the folder or main library. I checked my storage location (Firewire external drive) and the photo's were built and added in the librarys folders. I then reboot the iMac to double check everything. Then I tryed to import them directly from the folder it added them too originally and still they did not show up in Aperture. Anyone have any ideas? This just suddenly start.
I am running Aperture with all updates and OS X 10.4.11 on an iMac 20 2.16 Intel with 2GB's of RAM and ATI Radeon X1600 256K Card.

No one has any suggestions...??? HELP!

Similar Messages

  • Some Aperture Brushes stop working??

    I have recently upgraded my iMac (i5 with 12GB RAM) from 10.8.5 to 10.9.3, upgraded Aperture to 3.5.1. Pretty much my first editing session, and I discover that about half the Aperture brushes have stopped working. This happens on previously unedited images, both JPG and RAW. All referenced images.
    These brushes seem to work fine:
    Retouch
    Skin Smoothing
    Burn
    Tint
    Definition
    Vibrancy
    Halo Reduction
    Highlights and Shadows
    Sharpen
    These brushes don't work - the brush menu comes up, I can change the setting, but the brush does not show, and I can't brush anything:
    Dodge
    Polarise
    Intensify Contrast
    Contrast
    Saturation
    Blur
    Sharpen
    Noise reduction
    Curves
    Enhance
    Levels
    I tried changing various brush settings, doesn't seem to help. I have submitted an a bug report to Apple.
    Any ideas from the forum, has anyone run into this?

    A reboot seems to have fixed it.

  • TMS import stops working

    Hi Gurus
    We have been importing transports into qas client 200 without any problems, we then created client 300 in qas and when we tried to import the transports that were already in the queue, the import started hanging, i checked the logs and saw that the RDDIMPPDP job had been stopped unexpectedly and i restarted the job and i was able to import into 300. The following day i tried to import the remaining transports but it was no longer importing, there is nothing in the. There are no entries in the import History, and the import monitor is just showing that the import is running. Can anyone help me out, what might be causing this???

    Hie Rishi Abrol
    Thanks for your prompt response, The Logical system is defined for client 300.
    I didnt understand when you said i should include the client 300configuratio and add the client 300 in the group, how do i do that?
    Configuration was done on DEV in client 100, and we were using clint 200 in QAS to test now we have creted a client 300 for training purposes but now import stopped functioning, i canolonger transport even to 200, so is it possible so is it possible to copy using scc1 from client 200 when there was no configuration done there, if possible pliz help me how to go about it, thanks in advance

  • IMovie import stopped working on my account

    I am using iMovie V 8.0.5 on a Mac Mini with Snow Leopard. After a few days of use, the "Import Movie" function started hanging (beach ball) when the form is displayed. Also, no files show in the folder area. This only happens in my account (Admin), so I suspect that it is a user problem and not an iMovie problem.
    Did I hammer a file somewhere that iMovie needs to run properly?

    Hi
    First. Delete iMovie Pref file then repair permissions - Else read list
    *Not knowing the origin to Your problem - General approach when in trouble is as follows.*
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
    • Delete iMovie pref file - or rather start a new user/account - log into this and re-try
    iMovie pref file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named. com.apple.iMovie.plist
    While iMovie is NOT RUNNING - move this file out to desk-top.
    Now restart iMovie.
    • Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
    iMovie updated ?
    QuickTime updated ?
    Mac OS version ?
    • Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
    • Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Screen must be set to Million-colors
    From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
    Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
    there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
    iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
    to my Sony camcorders worked properly as it did before.
    Lennart Thelander
    I run "Cache Out X", clear out all caches and restarts the Mac.
    Yours Bengt W

  • The Loupe in Aperture has stopped working just filled with grey whatever I settings I give it.

    Used to work fine. Am I missing something obvious here?!

    Aperture 2.1.4
    OS X Lion 10.7.5
    That what I suspected. The loupe is one of the features that does not work well with Aperture 2 in Lion and Mt. Lion, that is a known bug.
    For full compatibility with Lion and Mt. Lion you will need to update to Aperture 3. The version that is now available from the AppStore, is no longer as expensive as the earlier versions of Aperture used to be.
    Regards
    Léonie

  • Aperture Imports Not Working In Yosemite

    Running Aperture 3.6 and Yosemite 10.10.3.
    I have a large Aperture library and am trying to add to it.
    I have recently scanned a large number of images and want to import them into Aperture. They are in folders on my Macbook Pro. When I run "Import" in Aperture just as I have before, I get the original to relocate to the external file where I want them. However, while there is a "jump" in the file listing on the left like something is happening,  the photos do not show up in the Aperture projects that I have selected. The originals do move from my  SSD drive to an external drive. Just that the images do not show up in my Aperture projects. The unit counts do not show them either. If I go to do the import again and select "do not import duplicates" those images don't show up. so Aperture thinks they were imported. Bot they were not. I tried a search by the image name after the first one of these, but it did not find the image in Aperture.
    i can then manually import them from the external drive into Aperture, but it makes a duplicate of the image on the external. So I have to reassociate the image with the original that moved originally and delete the copy that i created in the external.
    I importing both jpeg's and tiff's.
    Any ideas?

    Have you tried to repair your Aperture library?
    To repair hold down the  alt/option and the command key simultaneously while double clicking the Aperture  application in the Applications folder  to launch the Aperture Library First aid tools. Hold down both keys firmly and long enough, until the First Aid panel will appear.
    The select "Repair database".  Repeat with "repair Permissions".
    If it still does not suffice, repeat with "Rebuild Library". But make a backup copy of the library before trying to rebuild.

  • LR 4.4 - Import stopped working, no msg

    LR 4.4 - Inserted SD Card- started import.  It sees the pics.  Selected all photos (and subsequently tried just one), then 'import' with same settings as always..
    Progress bar opens - but nothing ever moves
    Center Screen says Importing Files...
    CPU doesn't do any thing (task mgr report LR - 0%)
    Copied files to harddisk and same thing
    Rebooted machine (std MS win practice!) and same thing
    Develop module seems fine - was able to go there, then export a file to same disk as where import should be going.
    have all latest updates (for 4.4)
    thanks
    ..clark

    They must be somehow filtered out. Are you in a folder or a collection or
    smart collection? Any filters on?
    UPDATE:
    Doh... Sorry, Lightroom 1. No filters and no smart collections. Just the Metadata browser.

  • I have a corrupt Photo file, that makes Aperture stop working properly.

    I recently imported some of my old photos from a CD to the Aperture Library. Every time I open that project or try to work with any of those photos Aperture will stop working. (in a very aggressive way)
    The viewer wont update.!
    It wont make any change or save anything.!
    I have to quit and restart Aperture to have it working again, I don't know what is wrong.
    Any Idea?
    Maybe new aperture .5 will fix this??
    TKS
    G5 quad   Mac OS X (10.4.7)   big ram

    Another option would be to quit Aperture, remove the project from the Library using the Finder, reopen Aperture (the troublesome project will now be greyed out), throw the troublesome project out, and finally reimport the images back into Aperture. The only problem is you now have to re-do any adjustments etc. for that project. If he project has other images you do not want to re-do you could try just removing the problem import group, go back into aperture and then throw those images out, quit (you may have to force quit) Aperture and then restart Aperture. I did the above on a test Aperture library, but as usual you have to be carefull. Do not do any of this without first duplicating the troublesome library.

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

  • Every time I try to import a CD I get "iTunes has stopped working"

    I updated to the new 9.0.3.15 version of ITunes a couple of weeks back and ever since I have not been able to import CD's?
    It seems it works with every else syncing etc but not importing CD's.
    Every time I try to import a CD it will start then within a few seconds I get the message "iTunes has stopped working" and another message saying Windows is looking for a solution.
    I have tried going into Control Panel and Programs and repairing the installation but no luck.
    Anyone know how I can fix this.

    I can see messages for other programs that have had issues but nothing for iTunes.
    Hmmmm.
    Maybe try provoking the error another two or three times, taking a careful note of the time showing on the PC. Now head back into the Action Center. Is there a problem report for any application or operating system component that appears regularly at the same time as the iTunes errors?
    If so, paste a copy of a typical error report for that in a reply. (Fingers crossed that might get us a bit closer to understanding what is afoot.)

  • HI i have tried so many times to import images, both pictures and video from my hard drive to elements 131, and it keeps coming up with the error message " .....has stopped working we are looking for a solution to this problem etc " please help!

    After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found"  I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
    And some other questions...
    •What are you editing, and does your video have an orange line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

  • Adobe Photo Downloader stopped working; can't import from a DVD?

    I use Premiere Elements 4 (loaded with Adobe Photoshop Elements 6) on Windows Vista.
    When I attempt to import video from a DVD (via Get Media > DVD import) I am unable to do so and the message
    ADOBE PHOTO DOWNLOADER HAS STOPPED WORKING is produced by Windows.
    I would value any help with this problem!
    Many thanks, Don Varleyhall

    Well, if it was produced in an Adobe program, then it should be 100% DVD-compliant. The menuing structure should not be an issue, as it can with other programs (Roxio and Nero come to mind), or from a DVR-DVD unit. I have never seen one of those that did a DVD-compliant disc.
    This might point to something else going on.
    As a test, grab, or create a short Project in PrE with Menus, and then Burn it to Disc. Test this back in PrE, and see if it behaves exactly the same way. If not, then something might be odd with your first disc, or there could be some other issue. If the Importer fails again, I'd think about doing a Repair Install.
    If the test works, the first thing that I would do would be to Copy your DVD-Video. One can use the free burning utility, ImgBurn to do this, if they do not have Roxio, Nero or some other DVD Copy utility.
    As a thought, there are a lot of other programs, that can get in the way of many operations in PrE. You might find some tips on setting up your computer for an editing session, in this ARTICLE. Then, test with your DVD again.
    Good luck,
    Hunt

  • Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

    I have a problem with Adobe premiere Pro CS6  on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?

    >started roughly around the same time on both computers
    Most likely cause is a Windows update that changed "something" about the video system
    Check the vendor site (NOT Windows update) for a newer video driver
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Why would Lightroom video capabilities/iTunes import/Netflix streaming/Photoshop all stop working at once?

    Hi forum --
    Several programs all stopped working at the same time and will only work (briefly) right after I've restarted my computer including:
    - iTunes audio cd importing
    - Lightroom video importing and playback
    Netflix streaming (on both Safari and Chrome) won't work and Photoshop (CS4) won't open at all.
    Videos work without a problem in: Quicktime, iMovie, Final Cut Pro, and Bridge CS4 and CS6.  YouTube also works without a problem.
    Maybe the problems are conincidence, but this seems like it is posisbly a software problem with my computer, not my programs.
    I have tried reinstalling Ligthroom and resetting the preferences files but they don't help.
    The only things that I can think of that happened is that I:
    1. downloaded my own videos from my own YouTube acocunt after my external hard drive failed and maybe there was a virus?
    2. I deleted some programs with "Clean My Mac 2" and maybe it deleted some crucial file someplace?
    I am running a 2009 13" MacBook Pro with a 2.53 Ghz processor and 4 GB RAM and Mountain Lion (everything is up to date).
    Thank you for any suggestions!

    I had problems with streaming until I changed the WiFi channel that I was using.  The original one conflicted with my neighbor.  After that, MOST of my streaming problems vanished.  Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi).  I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another).  :-)

  • Itunes stops working when I import

    I'm trying to import book files from my attached storage device.  Everytime I click "add to itunes", I get an error message that iTunes has stopped working.

    there's a bug with 10.1.0.54 that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices.
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though) and/or switching off the option to convert files to 128 kbps AAC when syncing.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (2 and 3 do help with the device-syncing variation.)

Maybe you are looking for