Aperture in iMovie Media Browser
I have looked in the Aperture manual, in the iMovie help, and I did a search on this forum. So far, I can't find an answer and I hope you can help. I recently upgraded from iPhoto to Aperture 3 and everything is working fine in Aperture 3. In Aperture 3, I have the projects sorted by date, which is the way I want them. that works fine. But when I use the Media Browser to access my Aperture projects, they are sorted alphabetically, not by date. This was not a problem when I used iPhoto, so I don't understand what the issue is. Is there some way to get the iMovie media browser to use the same sort order I have specified in Aperture 3? Thanks in advance for the help.
naperdan, thanks for your response. No, I had not seen that thread before, but it doesn't address my issue. Aperture 3 is working just fine for me, and I am not having any of the problems after importing my iPhoto libraries into Aperture 3 that the OP indicated. I can see all of my Aperture projects and albums in the Media Browser, I just can't find how to show them by date rather than by name. I could, I suppose, rename all 46 projects (e.g., change "photos0810" to "0810photos" and that would probably force the Media Browser to work the way I want it to. I just don't understand why it would show the iPhoto library in the sort order I specified in iPhoto but the Media Browser is treating the Aperture 3 library differently.
Similar Messages
-
help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!
That is your answer then.
Large is 960x540
Medium is 640x480 (or 720x480)
Mobile is probably 480x272.
It is offering you the sizes that make sense given the size of your source material.
As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work. -
Images Shuffled Randomly in iMovie Media Browser?
When creating an imovie slide show and opening my AP3 projects in the media browser the images are not in the same sequence as when I view them in AP3. Can this be corrected? I've posted this ? in iMovie forum as well.
Aperture's iLife previews currently only sort by version name or manual sort. You'll need to set your albums/projects to sort by one of those options if you want the order to be predictable.
I also recommend you voice your displeasure about this annoying bug to Apple: http://www.apple.com/feedback/aperture.html -
IPhoto doesn't show up in iMovie media browser
I have the fully installed iLife 06, and when I am in iMovie and go to the media browser to pick an image, nothing shows up to populate the browser. It seems as if the browser is not seeing iPhoto. I have tried this with iPhoto open and closed. No difference. I have thrown out the iLife media browser plist. Still no luck. Threw out the iPhoto plist. No luck. Repaired permissions and restarted. Stilll no luck. Coincidentally, the mark/space photo conduit for my in The Missing Sync cannot see iPhoto also. It's as if other programs have no clue that iPhoto is installed. Anybody have this happen? What's the fix?
SGMS,
Welcome to the Apple Discussions.
You are right. That example describes the keyword information from the AlbumData.xml file, not the keyword list in iPhoto.
In the iPhoto keyword list, click on your first keyword to select it. Then use the down arrow key to highlight each keyword in succession. If you come across a blank space in the list that becomes selected, click on the - symbol below the list to delete it. I have seen several reports of a blank keyword causing the problem. Another easy check is to click on a keyword, then click Rename to highlight it. If you see a blank space before or after the keyword, delete the space.
If that's not it, I'll explain further. Dave E's instructions are for how to read the AlbumData.xml file to help identify if you have a faulty keyword. The xml file is just inside your iPhoto Library Folder. You have to access it through the Finder. (Be warned not to change anything you find from the Finder, though.) Right-click (control-click) on the AlbumData.xml file. Choose Open with > Other... then navigate to the Application Text Edit. When it opens, type Command F (Find) and in the Find box enter "List of keywords". The document will scroll down to show you the text where the keyword information is listed. This is where it looks like the description by Dave E. If you see 2 keywords lumped together, then you close the xml file, go back to the keyword list in iPhoto Preferences, and edit or delete the words that did not have the same format as the others. -
Still can't see iPhoto in iMov Media Browser after deleting "&'s" and prefs
Combed the discussions - many references to this problem - I tried deleting ALL question mark symbols "?" from ALL my iPhotos - an arduous task but I know I got them all - then deleted the preferences and rebuilt iPhoto with command option - everything in it... Still no luck viewing my iPhoto libraries in iMovie - so can't increase duration times because "show photo settings" grays out - does ANYbody have a fix?
thanks!
iMac G4 superdrive Mac OS X (10.4.5) iBook G4I saw your post earlier when I was having the same difficulty. A recent post suggested rebuilding the iPhoto Library using Shift Option when opening the application. I tried that and it created a new iPhoto Library_2 folder. That folder showed up in the Media Browser, so I just imported all the photos in my previous iPhoto folder into the new one. It worked for me; I hope it works for you.
-
I made an iMovie from very sharp photos, moved it to iDVD via Media Browser, Made "Professional Quality" DVD in iDVD. When I play the DVD back on eiher my iMac oxs 10.7.5 "DVDPlayer" or my DVD player hooked to my Sony TV set, the resulting movie from the DVD is unsharp, very fuzzy and very disappointing. I am using Memorex DVD-R discs. The playback colors of the made DVD are also changed from the original photos I used from i Photo.
Is this normal to loose so much sharpness and clarity in going from iPhoto to iMovie to iDVD?Hi
OR the long long answer is something like this:
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
iMovie’08 or 09 or 11 are not meant to go to iDVD.
They drop every second line in the picture.
Go via Media Browser (and then use MEDIUM - as HD does get a BAD Scale down quality) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
- iDVD - set Burn Speed in iDVD Pref. / Advance - BEST IS NOT BEST - x2 or max x4
- Roxio™ - set in burn process
- Disk Util tool - set in burn process
BEST IS NOT BEST
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
Use Verbatim DVD-R (absolutely no +/-RW)
Set down burn speed to x4 - less burn errors = plays on more devices
No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
Save as a DiskImage (calculating part)
Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
Use Verbatim DVD-R (absolutely no +/-RW)
Set down burn speed to x4 - less burn errors = plays on more devices
No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
Minimum of 25Gb free space on Start-Up hard disk for SD-Video Quality and about 4 - 5 times more - if it is a HD-Project.
No other programs running in BackGround e.g. Energy-Saver
Don’t let HD spin down or be turned off (in Energy-Save)
Do not have more external devices connected as is of urgent need. Move hard disks that are not to be used to Trash - Or to be disconnected/turned off
Goto Spotlight and set the rest of them under Integrity (not to be scanned)
Set screen-saver to a folder without any photo
First - then make an active corner (up right for me) and set pointer to this
Secondly - turns on screen saver
Then - to show that it has nothing to show
No File Vault on - Important
NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
if a project is in a real hurry
First - Then Start a new User-Account and
Then - log into this and iMovie get's faster too
And let Mac run on Mains - not just on battery
Yours Bengt W -
Can't drag quicktime movie into iMovie media browser
I've created a file in Keynote, exported it to quicktime and would like to import into iMovie. iMovie keeps giving me this error message: Unknown error: the file could not be imported. Can someone help?
Hi
As I get it QuickTime or .mov files are not just one type but to be viewed on
like a container that can keep just anything.
iMovie can't import just anything esp. up to version 6. I can import only type and
that is streamingDV so in QuickTime I secure as to save as this.
I really wish for a description of all file types and "containers" so that it was
easier to select right one and right quality.
Yours Bengt W -
Can't import quicktime movie made from Keynote into iMovie media browser
I've created a file in Keynote, exported it to quicktime and would like to import into iMovie. iMovie keeps giving me this error message: Unknown error: the file could not be imported. Can someone help?
Rarely am I able to solve my own problems, regardless of how much effort. But I did figure this one out, simply by trial and error. *To recap... I have created a sample slide show to use as a test run through Keynote (to get the best builds and transitions), to Quicktime Pro, into iMovie (to marry the features of iMovie with the Keynote slides) then back to Quicktime Pro as a final product.* It was a crash course with all 3 applications, so a huge learning curve for me.
Quicktime Kirk helped me successfully with my first go round with this. But with so many nested compression windows and so many combinations of choices, I eventually forgot which settings had worked correctly to give me the quality resolution that I had achieved the first time.
So I posted several messages asking for some clue where I was going wrong. Kirk did get back to me, but told me that I needed to create my project entirely without iMovie. Very frustrating because I knew I had done it before with iMovie.
After literally hours of analyzing all the working files and duplicating the exact settings I used before, two scenarios were happening. One, the end product had terrible resolution quality (not even close to the first time around). *Or two, when trying to import the first Quicktime file created from Keynote into iMovie, there was an error message saying that the file could not be imported*.
So, I eventually decided to try the following:
*1. Create Keynote file*
*2. Export to QT with "Full Quality/Large" setting checked, and "Include Transparency" checked.*
*3. Open QT file to check quality. If acceptable, export this QT file as a QT file again using the highest quality settings - preferably ones that match the first export from Keynote to QT.*
*4. Open iMovie file and import this new QT file.*
*5. Do my thing with it.*
*6. Export (Share) iMovie file as a final QT file with "Full Quality" setting checked in the first pop-up compression window.*
This sequence proved to be successful with the same high quality resolution as the very first go round with it. I KNOW, though, that this wasn't the sequence I used the first time because I didn't do step 3.
I am just happy that I got what I needed. Now I can create my full presentation without worrying about the outcome in the end.
*Because I'm on a Mac, and the AIC default is used, my next feat is going to be identifying codec settings that are going to work both on Mac and PC (newer machines AND older machines).*
*So, does anyone have a clue how to do this?* -
Imovie media browser export audio
I get a meesage that says i "Song Not Authorized". I have authorized all of my accounts and it still won't let me use the music. What do I have to do?
welcome Petesmith to the boards ...
have you installed all latest updates, specificly Quicktime 7.2.?
after doing so, quit all apps, launch Disk Utility, run a 'repair permissions'
then, launch iTunes, play a few purchased songs...
then launch iM... -
Some Aperture stills not appearing in iMovie 11 Media Browser
Hello all,
I have been importing images into Aperture for a while now and just realized that iMovie (09 and 11) are not reading some of the stills I have stored in it. I have made sure that all my images are stored in an Aperture managed library and not as reference files. When I start up iMovie it takes a while and scans for new videos but I'm concerned with the stills that are not appearing. I can see the project and album titles appearing in the Media Browser but iMovie states that there are no files inside. I've also told Aperture to always share previews with iLife and iWork. Any ideas?
Thanks in advance!Welcome to the forums.
The fact that you are able to see the Ap library and the project suggests that there maybe no previews available for that project.
At the top of the Library tab is a little cog, within here is an option for previews, also in the Ap preferences is another option for creating previews, check that these are set correctly.
Tony -
Some Aperture photos and projects missing from iLife Media Browser
Good evening - having a little bit of trouble getting Aperture to work smoothly with my iLife media browser (i.e., inserting photos into Mail, Pages, Keynote, etc).
I currently have 5699 photos and 131 projects in Aperture. But the iLife Media Browser only shows me 5131 photos and 130 projects; when clicking on individual projects in the browser, anywhere from 3 to 70 photos per project are missing. Tried repairing permissions, repairing the database, and rebuilding the database - this improved the issue, but didn't completely resolve it as 5679 photos now show in the Media Browser, and 20 remain missing. Also tried deleting, and generating previews for all my photos in the library. No change.
My library is mostly referenced, with a few photos managed.
Obviously in the grand scheme of things 20 photos missing in the Media Browser not that big a deal. But wanting to get to the root cause though because without solving this issue, I'm concerned about a larger underlying problem that may only get worse as my library grows.
Has anyone had, or resolved a problem similar to this? And can anyone offer any additional suggestions? Are there any specific files that feed the iLife Media Browser that I can delete and rebuild that may solve this issue?
thanks,
MarkI think I've ironed this out. Several intertwined issues. I took a moment to type out my notes; hopefully it helps you guys solve this quickly if you get a call from someone else on this down the line.
[1] original problem of several hundred items missing in Media Browser: probably an issue of previews not being built. Mostly fixed when I regenerated previews for my library, but repairing permissions and repairing the database may have helped too.
[2] Residual problem of 20 items still missing (5698 items displayed in Aperture when selecting Inspector > Library > Photos; 5677 items displayed in Mail Photo Browser). My issue wasn't as much with 20 missing items in a browser as it was with trying to understand the root cause and whether I had an underlying Aperture, Aperture Library, or OS problem that would bite me later. Turns out several things were causing this problem:
[2a] In Aperture, when you select Inspector > Library > Photos , all your content is displayed: photos, videos, and any audio clips you may have imported (e.g., a recorded audio clip on your camera narrating shoot, location, client, exposure value etc). So even though you've selected "Photos", your "xxx items displayed" count on the bottom of the screen reflects all your imported content. This is not the case in the Media Browser - of which there are two variants in Mac OS:
[2a.1] Mail has a Photo Browser, which behaves much like a "Media Browser Lite: the title bar says "Photo Browser", it only accesses your Aperture and iPhoto Libraries, and only shows photos and video.
[2a.2] iWork applications have a more comprehensive Media Browser, where you can select between Audio, Photos, and Movies. If you select Audio the iWork Media Browser will show any audio files present in your Aperture or iTunes library. If you select Movies, the iWork Media Browser will show any movie clips present in your Aperture or iMovie libraries. Photos behaves the same way as "Photo Browser" in Mail, showing any photos present in your Aperture (or iPhoto if installed) libraries.
Turns out I had three audio clips in my Aperture library. When selecting "Photos" in either the Mail or iWork browsers, the total item count will only show photos and videos - no audio clips. So now 17 missing items remain.
[2b] Stacks - one project contained nine photos grouped into a stack. Only the key photo of a stack is previewed/shown in Media Browser. So a stack of nine photos will only show as one in the browser - unstacking the photo will allow them all to appear. So now nine missing items.
[2c] Seven photographs somehow had broken links to their referenced masters, and needed to be reconnected. Down to two missing items.
[2d] One photo simply wouldn't cooperate - no matter how many times I regenerated the preview, or deleted the preview and then regenerated it, nothing worked. I deleted it from the library and reimported it. One missing item remains.
[2e] Final missing item was a photograph I rejected. Makes sense; as media browser does not display rejects.
Problem solved!! Hopefully this might be of help to somebody in the future.
cheers,
Mark -
Media Browser not loading with Aperture 3.1
I upgraded to Aperture 3.1 with the automated software update and have come across a debilitating problem - the media browser can no longer load Aperture photos. When I click on Aperture the browser that shows up in a standard file open dialog window just has a spinning grey circle. Media from iPhoto or iMovie will load, so it's something specific to Aperture after upgrading. This is a big deal - are there any recommended solutions? Have others comes across this problem with Aperture 3.1?
Hi,
See the discussion at the link below -- I can only confirm the problem, and am not confirming the one posted solution because I have not tried it yet, and have not reasoned why it works, although it very well may.
http://discussions.apple.com/message.jspa?messageID=12521337#12521337
Ernie -
Can't access Aperture 3 previews in iLife Media Browser
I know this has been posted before but I don't think I've seen a resolution yet ....
Since migrating all of my data etc from my MacBook to new iMac I can't see the Aperture previews in the Media Browser. I've tried reinstalling Aperture and previews are set to be shared with iLife (in Preferences).
Any ideas?
Thanks in advance.
JonThanks for this - it didn't work, but something else did!!
Turns out there's actually a Knowledge Base answer on a similar matter (discovered after calling Apple Support). Just open Aperture from the dock whilst holding Option + CMD and then select to Repair the library - middle option. Worked straight away!
Thank you
http://support.apple.com/kb/ts2875 -
iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped! -
iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.
Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
THe Share to iDVD option is only activated if your source material is DV or AVCHD.
Maybe you are looking for
-
Media encoder CC all black screen
Hello, 1 week ago my media encoder CC started having an all black screen when opened. There are no buttons no tekst. The only thing you see is the top bar. I have reinstalled Media encoder, installed the latest version. But it still has a black scree
-
About to back up iTunes to XHD. Have old version 10.6.3. Have been afraid to update with 40GB of music. Been digitizing vinyl. In this version, playlists export as m3u, which needs to be converted to MP3-Song by song??? Goal is to also be able to b
-
A problem with vlan.dat retrieval in the RME
Hello, the customer has LMS 3.1 and he uses RME for the backup of config files and vlan.dat files from netwrok devices. It is working fine, but he has problem with backuping vlan.dat files from the following switches: Cat2960-8TC,-24TC, Cat2960G-24TC
-
Need a better screensaver or find the options in mountainlion screensaver
Hi! I am gonna use a Macmini as a commersialhub that will show "commersial"pictures in a flow, infinitive loop. I thought I could simply use the built in screensaver in MountainLion and simply "play" a loop of pictures inside a defined folder. BUT it
-
How can we use Java to access contents in an excel file and convert the info into a message and mail this through MS Outlook? Plz reply to [email protected]