Aperture is not showing up on iWeb or iMovie

My library in Aperture is not showing up on iWeb or iMovie. All that shows up is iPhoto which I dont have much on there so right now my temp fix is transferring the photos I need to iPhoto and then using but shouldnt Aperture integrate the same way.

but shouldnt Aperture integrate the same way.
It definitely should. Have you set Aperture to always share Previews with the iLife and iWorks Appications?
Aperture main menu -> Aperture -> Preferences -> The Previews Tab
Set this to "Share previews with iLife and iWorks", also to "New Projects automatically generate previews" and select a reasonable preview size, the size of your screen would be perfect.
If you already had sharing enabled, update the previews: Photos -> Update Previews
or Photos -> Delete Previews, and then "Update"
If this did not help, you may have a problem, that the Media Browser does not recognize your Library:
Create a new (temporary) Aperture Library: File -> Switch to Library -> Other/new
Then Quit Aperture, open Aperture again,
Switch to your old Library: File -> Switch to Library -> Your main Aperture Library
Quit Aperture again.
Hopefully the iApps now will show Aperture.
If not, maybe there are problems with your Preferences or the Library needs fixing: Then go thru the drill of the Trouble Shooting basics:
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
If this does not help, report back.
Good luck

Similar Messages

Aperture library not showing in mail, iweb or iphoto

After upgrading to 3.1 my Aperture Library is not coming up in other applications. It also is not showing up as an option for screen saver. Anyone have this issue?

Do you have everything looking right inside the library? Can you go into your Aperture library bundle and see if you have the following files: an ApertureData.xml file, an iLifeShared folder, and inside the iLifeShared folder a file called ApertureDatabaseTimestamp?

Aperture previews not showing up in media browser (and iweb)

some of my images in aperture projects do not show up in iweb or in the media browser at all....the projects are listed and most other project show all images, but some don't....
i tried several things including consistency check and rebuilding the entire library....nothing works....
this is very annoying...one of the few reasons (but a major one for me) to stick with aperture over LR is the system wide integration....but it has to work....

thanks for that info....i actually managed to fix it by rebuilding my previews.....but there was no reason at all for the previews not to show up....and it actually took 2 times to rebuild them all....some still did not show up after the first run....
i really hope we will see an upgrade soon....some things just have to be smoothed out....and a few added....

Websites not showing up in iWeb

I have some websites that were created in an earlier version of iWeb that show up in the Sites folder on the MobileMe website, but they DO NOT show up in iWeb. I cannot figure out how to "sync" my local iWeb with what is on MobileMe. Any Suggestions?

GoldwingTX wrote:
I cannot figure out how to "sync" my local iWeb with what is on MobileMe. Any Suggestions?
There is no way to "sync" your local iWeb with what is on MobileMe. Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
You can manually back up the Domain file, or use Backup to back it up.
By the way, for searching purposes it may be useful to know that an iWeb '06 Domain file is called "Domain.sites" and iWeb '08 & '09 Domain files are called "Domain.sites2" — although the “.sites” extension is usually invisible.
If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html

Aperture library not showing up in upload browser

When I go to upload Aperture photos to the web, my Aperture library is not listed in the media browser. Only iPhoto and Photo Booth is there. I've had to go into Aperture and export the photos to upload them. This started to happen after I upgraded to Lion. Any suggestions?

Aperture did not show up in any other apps, but I found an discussion started by someone with the same issue, and the issue was resolved by creating a new library, then swicthing back to your original library. I tried this and it worked for me also. Here is the discussion: https://discussions.apple.com/thread/2338518?start=0&tstart=0
Thanks for your help

Aperture is not showing all photos in photo stream.

Aperture is not showing all photos in photo stream. I have re-set photo stream from within the aperture app, but it only downloads a small fraction of my photo stream. Any ideas?

Sorry but you're wrong, as the article that you quoted pointed out
Since your Mac has more storage than your iOS devices, your photos automatically download and your Mac keeps every photo from your Photo Stream by default

Drop Shadows not showing up with iweb 2.04 in firefox please help!

Drop Shadows on my frame are not showing up with iweb 2.04 and firefox please help!
They show up with safari but not firefox. I've read that publishing to mobile me solves it but I publish to my hard drive and ftp to my host (not mobile me).
Thanks for any help

Drop shadows, borders etc are a bad idea in that they increase the file size and the download time of your page.
Create your image, drop shadow etc on your iWeb page, take a screenshot, crop it and replace the original image with the, much reduced, JPEG>
Example....
http://roddymckay.com/PhotoStuff/PhotoFile.html

APERTURE GALLERY NOT SHOWING IN IWEB WIDGET.

It happens if you have published Photo gallery with exactly the same name of a Video Gallery with Aperture 2.1. iWeb09 Widget does not show the PhotoGallery with that name.
Just rename it and ... it will be there to drag into your web page.

Sorry I posted this as question but it should be as a bug.

New Aperture photos not showing up in iLife browser

I recently upgraded from Aperture 2 to version 3. When I open the Media Browser in any of the iLife apps, I can see all the photos/projects which existed in Aperture prior to the upgrade, but any pictures I've added since do not show up.
I've tried all manner of repairing permissions, turning off face recognition, creating blank libraries, turning preview sharing off and on, but nothing seems to help.
Does anyone have a possible solution?

I had this problem, and what I actually did was a rebuild on the Aperture database which fixed the problem. I got it from Scott Bourne's link below. After rebuilding the Aperture database, I restarted iTunes and the Aperture libraries showed up with the correct count.
http://photofocus.com/2010/02/27/aperture-library-rebuild
It’s been a while since I’ve talked about this but I recently received a question for the podcast that might be answered here on Photofocus.com.
If you use Aperture (II or III) and you have a large library or make lots and lots of changes to even a small library, the Aperture library can bog down or even become unstable.
This has something to do with the database and can lead to symptoms like pictures not showing up or slow scrolling to occasional thumbnail rendering and overall slower performance. I personally also believe it’s tied to a memory leak in the program. In any event, when this happens, rebuilding the Library is often the fix.
Before you rebuild your Library, back up everything to your Vault. Then, quit Aperture. Press and hold Option + Command and launch Aperture by double clicking on the application icon. Follow the prompts to start the rebuild.
It will take some time for the rebuild to be complete. I have my images stored in multiple Libraries of 10,000 image. Rebuild time is about 45 minutes on average.
At the end of the process, you should see snappier performance. This can also be a fix if things are just going haywire without reason.
When you are confident that you haven’t lost any images, back up this newly-rebuilt Library to your Vault and you’re finished.
I recommend that you do this every three months or so and more often if you are a heavy Aperture user or have very large Libraries.

Aperture photos not showing up in other apps

I just noticed that all my aperture photos arent showing up in other applications that provide an aperture hook. EXCEPT for the latest images that I have imported.
All my images are the and I can see the folders fine in other apps, but they show empty. I did have to do an archive and install lately so am sure that I had some files that didnt make it over..
How can I recreate my library in order to fix this?
am not missing anything in aperture, just the integration with other apps, I tried exporting and then importing my library but lost all the organization that i had done. so reverted
thanks.
Darrin

I had updated the previews with no luck, I just restored my library from the vault and it is rebuilding everything now.
that worked! maybe update previews was different than a rebuild of previews, but i didnt see that option.
thanks

Photos not showing up when iweb site published

Once the website has been updated to iweb 08 the photos on pages do not show up.
Has anyone found a solution to this?

I am having the same problem and I built my site from iWeb 2.02 from the start. The curious thing is that the pictures show up on my G4 but not on my old G3 which runs OS X 10.3.9. Most of my friends are getting the pictures too. Could it be a computer problem instead of an iWeb publishing problem!?!

Aperture 3 Not Showing Pictures in Edit But Otherwise OK

Hi,
Aperture 3 is not showing pictures in the edit screen. Previews are ok. Moreover, when I zoom in in the edit window, pictures are showing correctly. Also they are shown a second after an adjustment is applied (and, actually, if you hold the slider you can see the picture the whole time). It exports fine.
I've tried:
repairing permissions;
repairing database;
rebuilding database;
creating a new library and importing;
manually repairing the library as per https://discussions.apple.com/message/11700059#11700059
re-installing Aperture;
reparing permissions system-wide.
Nothing helps. I don't have the backup, obviously. System is Macbook Air 1.7 GHz i5, 4Gb.
Could anyone, please, help?
Thanks in advance,
G.

OK first off the procedure you referenced re: manually trying to rebuild a library is a last ditch, library is on fire, crashes the world procedure. It is never to be done as a first wave troubleshooting step and it is never to be done without a complete backup of the library. Hopefully that hasn;t added anything to the problem.
Ok that's out of the way. You should start by removing the filter you have on the browser. It's most likely not causing this but there is no need for it and it's only adding a layer of complexity we don;t need now.
What version of Aperture? If it is 3.2.3 (the latest from yesterday) did this start happening the? If it is not the latest you should upgrade.
Does this happen with all images in the library or only some? What type of images RAW or JPG?
If you create a new empty library and import a few images into it does the problem still happen? What if you make a new user and run Aperture as that user on a new library?
When did the problem start? Was it working OK before with this library?
Finally have you rebooted since this problem started?

Albums in Aperture 3 not showing upon IPhone/IPad "Photos" App

Hello;
Some of the Albums I have on file in Aperture 3 are not showing up on my IPhone nor IPad in the "Photos" App.
Am I missing a setting?
Thanks Mark

What happens if you select the Photos icon in the Library tab of the Inspector?

Aperture does not show my Photostream adjustments

I know that everything involving Aperture, Photostream, etc are all up in the air for the time being (or at least until Yosemite/Photos are released) but I was wondering if I was missing something.
When I take a photo on my iPhone 6 (obviously running iOS 8) and then do some adjustments using the Photos app, the final image will appear properly (read after adjustments) on our other iOS devices (an iPhone 5 and two iPad Minis) but not on my Mac running Aperture - latest version. Any ideas on why or what I am missing/doing wrong?
Thanks,
Steve

Hi Leonie,
Not in front of my iMac now but whatever the latest release version of Aperture (I think it is 3.5.1 or something like that) is what I am running.
Yes - with "photo stream" - even though the iOS 8 devices no longer call it that. (If you mean am I using a "shared family photo stream", no, not yet, though that was suggested in another forum as a possible solution because then the edited version should show up in either Aperture or iPhoto.) The pictures taken from the iPhone 6 do get "uploaded" and do appear in Aperture in Photo Stream, but not showing the edits.
I don't see anything called "iCloud Photo Library Beta" in the settings for any of my iOS 8 devices. What I see under iCloud is "Photos" and then the option to turn on My Photo Stream (which is on) and iCloud Photo Sharing (which while also ON, as I said before I have not tried yet). If you are referring to "iCloud Drive", no that is not turned on as neither of my iMacs would be able to see it until Yosemite is released anyways.

Aperture does not show tick box for shared photo stream as promised on the help screen

I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?

You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84

Aperture is not showing up on iWeb or iMovie

Similar Messages

Maybe you are looking for