Aperture library conversion to AP3 just Fails - every time

I just upgraded to AP3 from AP2 with the upgrade disc - and it wont allow any library conversion at all - just pops up "update failed" after only 1 sec EVERY time.
tried deleting and reinstalling AP3 same thing
help???

You should get a request to login that is used for the activation on the subscription services.

Similar Messages

  • I am trying to export the PDF file and conversion fails every time.

    I am trying to export the PDF file and conversion fails every time. File is too large of too complex. What do I do? One file is about 55 mb and the other is 58 mb.

    Try extracting part of the file and see if the extracted part can be Exported. If so, repeat with the next set of pages. When done, try to load all into the first file.

  • ITunes loses my entire library with artwork, playlists and podcasts every time I close the program. Any advice very welcome

    iTunes loses my entire library with artwork, playlists and podcasts every time I close the program. Upon restarting it takes at least 15 minutes to rebuild the library and podcasts and a lot longer to replace the artwork, I also lose playlists. I would really welcome some feedback and assistance here and am losing faith in the Apple product. Since iTunes has been updated to version 11 it seems to have caused a lot of issues for many people. I am hopeful of a reply and a resolution. I have approx. 1200 albums at just under 90 Gb. Thanks in advance for any help.

    Ditch AVG (at this stage it really does seem to be the problem for some people) and install Microsoft Security Essentials...
    tt2

  • I am trying to convert a Microsoft Publisher Document to PDF but it fails every time although the reason is not clear. Any ideas?

    I am trying to convert a Microsoft Publisher Document to PDF but it fails every time although the reason is not clear. Anyone else had problems like this and how do I solve it? Thanks. Ray

    Hi raythree,
    I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
    Clear your browser cache (steps to do this vary by browser).
    If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
    Try another web browser.  A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
    Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
    I hope this helps. But let us know if you need further assistance.
    Best,
    Sara

  • I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

    I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

    Im wondering why my post hasn't been answered yet.  I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him.  I can understand why my phone couldn't be replaced because of the small crack.  I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems)  but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update.  I dont think it is fair to have to pay that as well. In addition,  because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm.  Verizon has cut this off.  Im very dissatisfied and I have been a customer of Verizon for 13 years.  Im hoping for a response this time.

  • Interclue fails to initalise upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time.

    Interclue fails to initialize upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time. What would cause this situation. Never had problems with this add-on with Firefox until I downloaded Firefox 4.0. I can disable, re-start, enable,re-start, and it works fine. The same scenario holds true if I uninstall and then re-install add-on.

    Just a guess, but I wonder if you have some application or process hanging up that's stopping it from shutting down? You might try closing each application individually and see if this helps.
    Good luck!

  • Update to 10.5.1.A.0.283 fails every time

    Update to 10.5.1.A.0.283 fails every time
    It is Xperia Tablet Z SGP321, no branding, no SIM lock.
    In the past only Sony original firmware were flashed.
    Currently 10.4.1.B.0.101 is inside.
    Update to 10.5.1.A.0.283 using PCC fails on every attempt.
    PCC was updated to latest available version.
    The whole progress looks like following
    - first PCC carries out the preparation stage
    - than PCC reports to carry out download
    - as soon as progress bar at approx. 50% of whole scale the preparation stage 
     is entered again
    - it takes very long time, between 5 and 10 minutes, till the progress bar reaches 
    nearly 100%
    - download procedure ends with following message
     error code 10, a hint to check firewall settings if PCC and Sony Update Engine
     are passed through, a hint to retry later
    - switch off firewall
    - switch off antivirus
    - disable all protection mechanism in Windows EMEA
    - uninstall PCC, reboot, install  PCC of current version again
    All the above measures do not help.
    One week ago the Sony Support claimed I should retry some time later.
    How long do I have to wait for retry? a week, a month, a year, 10 years, 20 years?
    It is a big effort to get this device close to the windows desktop device
    with PCC installed and running on it, to get connected this device with such windows desktop device,
    to invoke PCC and the update procedure. All this effort just to see in the end the update
    does still no succeed!!!!
    How long do I have to live with Xperia and obsolete Android on it?

    The point of trying a different computer is that it gives information. 
    If it works you know that your PC is the problem. 
    If not, you have to look further. 
    And finally - if nothing works  - you can try to flash it. 
    My Sony z is working like reborn after a clean install. 
    It takes some time to learn,  but after that it isn't that difficult. 
    My tablet works like before KitKat (sd-card) ,  but with the new functions. 
    No serious bugs whatsoever anymore.! 

  • Time Machine Backup  fails every time "Backup could not be completed"

    I want to do a new Time Machine Backup on my iMac2007 Snow Leopard 10.6.8 fails every time with message  "Backup could not be completed."
    Console says "Error 11" Some Files allways can not be copied/saved by Time Machine,  i search an exclude them in TM not to save them, try again, new ones po up every time.
    Does anyone know a solution?

    One thing which may help.
    I had similar issues....a few times.
    Have done all the renaming (<8 characters) etc etc as detailed in these forums.
    The first time, I erased TC HD and started again. This fixed things for a few days, and then the same issue came back again.
    The next time, I simply copied the sparsebundle file (so I had two sparsebundles, one called xxxxxxxx.sparsebundle, and the other called xxxxxxxx copy.sparsebundle (luckily I had room on the HD to do this)). Then I deleted the original sparsebundle, and before I could rename the copy back to the original filename, the image mounted and started backing up....to the sparsebundle with " copy" still in its name.......so I left it be.
    A week or so went by, and then I got the same "unable to mount" error message.
    Rather than going thru the whole process again, I simply took the " copy" out of the sparesbundle filename, and all was well again.
    I continue to get "unable to mount" error messages occasionally, so I simply rename the sparsebundle file (either by adding or removing " copy"), and it seems to resolve the problem, at least for a while.
    While not a fix, it seems to be a workaround for me until Apple works out what the issue is, and fixes it.
    Hope this helps someone.
    P.S. One word of caution. I just had the thought, while writing this, that I have not actually gone into Time Machine to check that previous backups (eg, one hour ago, one week ago, original backup) are there and are able to be accessed, should the need arise. Because the back-ups appeared to be working, I assumed, and assume, they were. Won't be able to check this for a few days as I am on the road.

  • Updating Adobe Community Help files fails every time after starting

    Hello,
    I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
    Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
    Any hints there would be appreciated.
    Thanks!

    Thanks, Mister Kapoor,
    that solved my problem!
    All the best to you, sincerely,
    Olaf Mueller
    Mit freundlichen Grüssen,
    Olaf Müller
    COMPLOT AG  Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13 
    Tel. ++41 31.313 30 33
    Fax ++41 31.313 30 39
    [email protected]
    http://www.complot.ch
    THE ULTIMATE PARTNERS
    - RITTER KREATIV
    Unternehmensberatung+Kommunikation,
    integrales Marketing, Werbung, Promotion, PR
    - Complot AG Multimedia Project
    Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
    - FOTarena
    Studio-Pool für Foto, Video, Bildbearbeitung
    Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
    Re: Updating Adobe Community Help files fails every time after starting
    created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
    Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
    Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
    Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
    Hope that Helps!.
    Arpit
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Backups Fail Every Time

    So I am wanting to back up my MacBook to time capsule. I have time capsule all configured and the drive shows up just fine to all of the computers on my network. When I go into time machine preferences, the disc shows up so I add it. Last night I plugged my computer in over ethernet first before doing the first backup. I went to bed and woke up the next morning with an error saying "Unable to complete backup. An error occurred while writing to the directory" or something similar to that. The disk image (sparsebundle) was still mounted on my desktop and I am unable to unmount it without restarting. I restarted and tried again and it said it was unable to mount the image. I then deleted the image to start over and also excluded lots of stuff just to see if i can get anything backed up. It creates the image and starts copying stuff over and gives me the same error I got the first time.
    What is causing it to fail each time?
    Thanks!

    Mine is doing the same thing - it backs up about 50% of the way through, then fails with the same message. It was working for a while, now it's stuck and fails every time, and I haven't found a way to get backups to work again. Prior to this, it had occasional errors while trying to access data, but this is a new behavior. The Time Capsule has been a miserable experience so far...
    I've pretty much given up on assuming my data is actually safely backed up with this product.

  • Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    I would say to start by looking on their web site... unfortunately, that appears to be dead.
    Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

    I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

    Hi Emilemny,
    Welcome to Apple Support Communities.
    The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    -Jason

  • Import from iphoto fails every time.

    Import from iphoto fails every time.

    It should not be a serious flaw, since this something that you only do ONCE. You don't want to use both organizer and iphoto. You'll have two sets of photos with no knowledge of each other. Import from iphoto is not meant to be a regular use item, only for the one time after you've decided organizer is what you prefer. It's fine to make a small test catalog while you decide whether iphoto or organizer suits you better, but to keep on using both is going to make you crazy in short order.

  • HT4623 ios7.0.6 fails every time trying to update now what?

    ios7.0.6 fails every time trying to update now what?

    Are you updating over wi-fi, or cellular data?  Or through iTunes. If you get the mesaage that the update is not available . Make sure you have the correct date and time on you phone. then try again.

Maybe you are looking for