Aperture library on external drive that just died...

Not sure if this is the right place to post, but here goes.
I recently moved my Aperture library to an external firewire drive. I set my Time Machine to back it up from the external drive. Its the only thing I backup from that drive, all other backups come from my built-in interal drive on my iMac. Problem is, I don't remember the name of the drive and where I put the library file. So I am planning to get a new drive and I want to restore it from the backup. Any ideas?
If you know of a better area to post this, please advise.
Thanks

Alfredo,
Is your old drive no longer available?
You can browse your Time Machine backups like a disk in the Finder. Perhaps you can tell, what the name of your old drive and the name of the Aperture Library was. For example, my Backup drive "Lacie RaidBackup" looks like this in a Finder window:
It has a folder "Backups.backupdb" and with in folders for each Computer, then folders for each drives. Here you can see the backed up drives on your machine.
You can search the backup for Aperture libraries:
Select the the backup of your external drive and type ":aplibrary" into the search field, then set the search range to the name of your exterternal HD.
The Path bar at the bottom of the search window will show you the location of your Aperture library.
To restore your Aperture Library from Time Machine, open a Finder Window showing your "Computer" with all drives in "Column View" - set the Finder's Preferences to show all devices in the Sidebar, if you have not already done so:
With this window the frontmost Finder window dive into the Time Tunnel from the TM menulet:
Go back in time, until you are seeing your external drive appear in that window:
If you named your new drive exactly like your old drive, you should be able to restore your library using the "Restore" button .
For more general Information on TM see Pondini's excellent page: Time Machine - Frequently Asked Questions
Reagrds
Léonie

Similar Messages

Aperture library on external drive - Aperture not responding

as my laptop filled up - I created an external Aperture library on an external drive - with a matching drive used as a vault - worked fine - then I was deleting images from the laptop library that were also in the library on the external drive and when I re-connected the external library drive Aperture would be unable to start, had to force quit - I can not open the library on the external drive in Aperture - I can open the library on the laptop - but I need the images in the external drive - the vault was updated 6 days ago -
I am in the process of restoring the library from the vault - my question -
can anything be done to open the current library on the external drive? - any kind of work around?

Well, yes and no. When my laptop drive got full, I copied the laptop library to the external 500gb drive and gave it a different name. Then I proceeded to use it as the primary library as I shot 3 weddings. So, yes, I have 2 separate libraries, the one on my laptop and the one on my external drive(s), both have masters (no referenced files), the external drive has everything that the laptop has - the external drive has probably 100 gigs more than the laptop (the laptop has about 85 gigs of files) - I also have a second matching 500gb external drive that backs up the first external drive which is where the vault for the first 500gb drive is located.
I just restored the library from the vault (from December 1) to create yet another new library on another totally spare drive just to see if it would work - that was successful now it is recovering the 41 projects
that were in the vault - it looks to be running pretty smoothly - although the process has so far taken several hours. Recall, however, that this vault backup is 6 days old. The most current library still will not load. This new restored library opens fine. So, there is something corrupted (a bad image perhaps?) in the most current 500gb library that is hanging Aperture.
I still have the original cards that I shot in the past 6 days (about 20 gigs) which were not in the vault, but I did a lot of work with those files and would like to recover the projects from the library
that can't currently open. I have a desktop at my studio and I am thinking I will try opening the problem library (on the 500gb external) there and see what happens.
This whole thing started when I figured I could clear some files from the laptop that were both on the laptop and the external drive. I have done this before to create more working space on my laptop.
Have I clearly answered your questions? - thank you for your P.S. - I didn't know I could get the .approject files out - I may try that -

Backing up Aperture library on external drive.

Lately I haven't been using Aperture, I've just been organizing all my pictures into folders, and keeping the folders in my Pictures folder. Then making a copy of the whole thing onto my external. I decided to start using Aperture.
I finally just finished organizing everything the way I want it. But how should I go about saving a backup to my external.
I have 2 libraries. I also have 2 vaults saved (one for each library). So when I go in my Pictures Folder, I see Aperture Library, Aperture Library 2, and my 2 vaults. Is it enough to just put the Vaults on my external? Or do I need to put the whole "Library" on the external. I would think it would be enough to put the Vaults, cause that's what I would think the vaults are for. To completely restore the library incase anything goes wrong. But I just wanna be sure before something happens to my computer, and all I have are Vaults that don't do me any good.

Issues,
I would think it would be enough to put the Vaults, cause that's what I would think the vaults are for. To completely restore the library incase anything goes wrong. But I just wanna be sure before something happens to my computer, and all I have are Vaults that don't do me any good.
Yes, that is what vaults are for. With a vault you can restore everything that was in your library. Remember that referenced photos are not stored in your library and therefore not backed up in a vault. Also remember that the most likely reason to use a vault is because the disk with your library is damaged or unavailable in some way. For instance, my MacBook internal drive bit the dust absolutely, completely, just before Christmas. No booting up; the Apple store couldn't even look at the hard drive by attaching it as a secondary drive to a different computer. If you find yourself in that situation, your vaults in their current state would be completely useless.
nathan

Large aperture library on external drive; too large to move to internal before switching to photos

I have a 395gb aperture library on an external drive. It used to reside on my old macbook pro, but i got a new one (retina) with a smaller hard drive and i haven't found a way to bring it over yet. My plan was (and i started) to slim it down by getting rid of photos and projects that I don't need, but it'll take a while.
I was hoping i could bring it over piecemeal, like by exporting some folders/projects as aperture libraries, and then importing them into photos, but i'm not sure that's possible.
I tried opening the aperture library (on the external) in photos so it would migrate, but it said i need much more space (the external is pretty full). Any ideas?
Thanks,
Adam

jpvp wrote:
Hi,
NoisyScott: do I understand it correctly that your masterfiles on the server are just sitting in a folder individually, or are they within an aperture library that is on the server that just has your masterfiles???
And FINALLY: can you back up your referenced files (or versions) as well, and how do you go about that?
My master files are just sitting in folders on the server. I leave the Aperture Library on my laptop hard drive as it just contains thumbnails, previews and the actual Aperture database.
You can back up your master images any way you want; a separate hard drive, a Network Attached Storage device, Mozy.com, Amazon S3, etc. The issue is that backing up these images is now up to you as you can't use the Aperture Vaults with referenced masters.
For what it is worth, moving master images around in Aperture is ridiculously easy once you get used to it. You can Reference your masters to a new location at any time you want, as many times as you like then change your mind and consolidate them to your Aperture Library (and thus make them managed masters again) all without Aperture missing a beat.
The critical thing to remember is you must do any and all Master Image file operations through Aperture.
If you decide to re-organize your Master Image folder structure through the finder, Aperture will no longer be able to connect to those Master Images and you then have to attempt to re-connect the images to the references in the Aperture database. This sounds like it should be easy, but for some reason Aperture has a very difficult time doing this. If you only ever use Aperture to move the files around, everything works swimmingly.
Try all of the Relocate and Consolidate Masters functions with a small test project or two at first until you are comfortable with how you want to organize all of your files and then go for it.
Good luck.

Aperture - library on external drive Firewire 800 or S-ATA?

Hi
Which is the best kind of connections to store and edit images on Aperture library?
Do you suggest FW or S-ATA external drive?
thanks
Koferc

While eSATA is marginally faster in real world use than FW800, the fact that you have to retrofit it makes the calculation a little more difficult. I have a MacPro and was thinking of using the Newer Technology upgrade kit ($25) to add this to my setup. But after reading the experiences of a number of users regarding the complexity of the upgrade compared to the benefit, I decided to hold off. You can see some comments by people who've actually done the upgrade after the article.
http://www.macworld.com/article/133689/2008/05/newertechesata.html?
It seems that eSATA on a MacPro is a bit faster than FW800 on writes and about the same on reads. I was looking for a huge speed increase connecting a Nexto DI Extreme unit I use on the road, as it is limited to eSATA and USB2 (SLOWWWWW). But I only use this unit once a month, and once I factored in spending an hour taking my MP apart I decided it was better to do file transfers while I was out of the office. The cheapest way to "speed things up" - just do them when you aren't looking!

Aperture library on external drive for multiple computers

I would like to store my aperture library and all masters on an external hardrive (with a backup). Ideally I'll be able to only transport this external drive to work to edit photos and return home to my personal computer and continue where I left off. I've tried something similar but ran into problems with lost adjustments, etc and am wondering what the simplest method is that others have discovered.
Cheers

All the editing work is stored in the *****.aplibrary file.
THe most obvious way will be to keep it on the external drive. If you experience it is to slow with USB you could probably have a better performance with FW800. Probably not so much with FW400.
I have no experience with ***-aplibrary on external drive. Probably ist it to slowdown the editing.
The best way to edit on 2 different macs will need in my opinion some extra preparation.
Set both Aperture in exactly the same way pointing to referenced files on the external drive.
Keep the *****.aplibrary file on the HD of the mac you are using and at the end of your work copy it somewhere (may be on the same external HD where you keep the referenced masters). Before starting to work on the second mac copy this ****.aplibrary on it. You will need to do the same reversed to go back to the other mac.
This will probably give you the fastest editing but you will need time to copy the *****.aplibrary files, may be a lot of time. Even if you use a program like Tri-Backup to do the copy you will se that even if the *****-aplibrary has few changes it takes a lot of time to overwrite the older copy.
Keep projects and libraryes as small as possible, or you will waste more time coping it compared to the more speed in editing.
This is only my opinion, and I am not 100% sure of it. I'm giving it to you only as a suggestion you could try and see if it works for you.
Regards
Walter

Aperture Library on External Drive Keeps Locking Up

Hello all!
I have the aperture library that I created after my most recent wedding shoot on an external hard drive. Since I was importing photos out in the field, I created the library on my external from my laptop. I now want to edit photos on my desktop mac at home, and am able to launch aperture to my wedding library on my external, and browse for up to a few minutes, but then it freezes, and sometimes will unfreeze after a few minutes, but sometimes I am simply forced to force-quit. The external is properly formatted (Extended, Journaled), and is connected via USB 3.0. What could I be doing wrong?
Paul

and browse for up to a few minutes, but then it freezes, and sometimes will unfreeze after a few minutes, but sometimes I am simply forced to force-quit.
Have you repaired the Aperture library after the Force -Quitting? That is strongly recommended.
Next time you launch Aperture, open the Activity viewer (From the Windows menu > Show Activity). This way you will see, which media Aperture is currently processing, when it is starting to hang.
You may have a corrupted video or photo in your library, that cannot be processed and is causing Aperture to hang. You can test that by launching Aperture while holding down the Shift-key. This will defer the generation of preview images. If Aperture does not hang when launched this way, it is very likely, that a corrupted file is causing this, and you have to try to identify it.
If the shift-key does not make a difference, test with a new, empty Aperture library and add a few test images. DO you have the same problem with a different library?

Cannot access old iPhoto library in external drive that i used white macbook

I just bought new MBP and I tried holding down the command key and selected my old white macbook iPhoto library but it does not show any photos- help? (i already repaired permissions based on some instructions i found here - alt+command and double click iphoto) but still does not show the photos.
Please help, I have almost 200gb of photos here

move the library to the new machine - Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

Timemachine doesn't show external drive (that has now died)

Hi, I've had timemachine backing up my HD and two external firewire drives (one with my 11gb iphoto library on it).
If I open the timemachine generated Backups.backupdb folder in the finder, the contents of the 3 drives are all there in separate folders. Fine.
One of the external drives has just died, so I want to restore my iphoto library (i.e. move it from timemachine to the other external drive).
But when I enter timemachine, the dead drive doesn't show up.
If I try to copy the file I want to restore via the finder, it says it will take 450 hours!
What can I do?

Do NOT copy the folder via the Finder.
See #E3 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

This is a tricky one.
Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....." You may be asked for your adminstrator password at this point.
It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

Moving iTunes library to an external drive that already has music on it?

I want an external drive that contains music to be designated as my iTunes library. How do I do it?
Note: I do not want to move an existing library to the external drive, just start fresh with the library on the drive.
Thanks!

pbay wrote:
I want an external drive that contains music to be designated as my iTunes library. How do I do it?
Note: I do not want to move an existing library to the external drive, just start fresh with the library on the drive.
welcome to the discussion area, pbay !
1) launch iTunes with the option key pressed. choose to create a new library when prompted.
2) in preferences > advanced make sure iTunes is pointed to the external drive and that +keep iTunes media folder organized+ and +copy files to iTunes media folder when adding to library+ are checked.
3) from the iTunes file menu, choose +add to library+ and start populating iTunes with the tunes you want.
when you have added all tunes to your new library, make sure they play fine. right-click on random files and +get info+. look at the summary tab and check if the path leads to the correct location (your external drive).
when satisfied, the original files can be deleted.
happy computing ...

The memory on my MAC is full. It holds 4GB of RAM of which 79GB are photos. I would like to back up my photos to an external drive but just don not know how. I do not wish to use time machine. How do I back up my photo library, then delete the them t

The memory on my MAC is full. It holds 4GB of RAM of which 79GB are photos. I would like to back up my photos to an external drive but just do not know how. I do not wish to use time machine. How do I back up my photo library, then delete them from my MAC to free up that 79GB? Thank you.

Hi
Just to clarify a couple of points in your post.
RAM (memory) is different from hard drive space. You have 4GB of RAM, but that has no bearing on the amount of drive space you have, of which we know that 79GB are photos.
If those photos are in iPhoto, you should be able to move the entire iPhoto Library, from the Pictures folder, to your external hard drive. You can just drag and drop. Do not have iPhoto open while you're doing this. Once it's done, you can double-click on the moved iPhoto Library file to associate it with iPhoto, so that the app remembers where the library is for next time.
One more thing. When you move a file to a different location, and then delete the original, you don't have a backup. You still only have one copy. So if that external drive dies, you will lose all your photos. Time Machine is a very good way to prevent this from happening. You should dedicate a different drive for Time Machine backups.
Matt

How to transfer iTunes library to an external drive (thats easy!) but keeping the playlists musics on the computer?

How to transfer iTunes library to an external drive (thats easy!) but keeping the playlists musics on the computer?
Many thanks!

Select a single song with a broken link, press CTRL+I to Get Info, cancel when asked to locate the track and take a look at the Summary tab. Post back where iTunes is looking for the file. It begins file://localhost
Where is it really?
Please post back both paths so that I can make suggestions. Full paths please, exact spellings, you can replace your user name with <User> if needed.
tt2

Moving library to external drive

I am helping a client that has an iMac G4 with OS X 10.4. She has a LOT of photos in her iPhoto Library, around 25000 of them, and she is almost out of space on her internal hard drive. She has a new external drive that I would like to move her iPhoto library to.
I found instructions on the iPhoto information page. However, when I drag the iPhoto Library over to the external drive, it starts copying but then after a while I get an error about not being able to copy an alias file and it stops copying.
Also the copy procedure seems very slow, it was showing that it would take 9 hours to copy those photos. While I was watching the file transfer it was only moving about 100MB every minute. Does this model just have the older slow USB connection?

Hi, Techserv. Any iMac G4 built before September 2003 has USB 1.1, not USB 2.0 ports. With such a machine it makes no sense at all to use a USB-only external hard drive. Your client should have a FireWire-capable drive enclosure instead. It would be many times faster.

ITunes library on external drive and lost music

I wanted to store my iTunes library on an external drive that I would use with a new Acer One Aspire Netbook. I followed the directions I found in my research that said my library would be copied on to the external drive with the library on my bogged down Dell remaining in tact. Well, that didn't quite work out. When I look for the music on my Dell, I get the message that the original is missing, would I like to locate it. Neither the Acer or the Dell will recognize the library on the external drive, although it is there and the songs can be played through the iTunes music folder. Before I screw anything else up, is there any easy solution to finding my music and getting it back in the library without loading my 9000 files individually after they are located or deleting and starting all over again? I just got the new iPod Nano and would love to get some music on it. I used to know just enough to be dangerous, but now I don't even that much and I don't understand any of this!

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

Aperture library on external drive that just died...

Similar Messages

Maybe you are looking for