Aperture library to lightroom plugin not transfering all photos or projects.

I am trying to use the recent aperture import plug in added to LR5. Many of my projects and photos are failing transfer stating "(Possible reasons include asset offline or unsupported asset type.)" I cannot find the difference of the failed jpegs, NEFs, from the others which tranfered. Any help, suggestions??

No, no, no. Can't believe they still don't understand the plugin after all this time. Adobe support is abysmal. And you pay a subscription fee!
The plug-in is a great alternative, but it does have issues. And the most important steps for migration need to be done in Aperture, which may explain their skills gap.
See this post for a partial explanation.
How did your migration to Adobe Lightroom go?
The key to NOT running out of disk space is to relocate your images from "managed" status to "referenced". You can specify a better folder structure for your resulting Lightroom library. Be aware that you will need some overhead, as your Aperture library (metadata) takes space, as your Lightroom catalog will, too. But migrating "managed" Aperture images results in a full copy.
There's other considerations for Aperture previews. Although much smaller, all previews "should" be copied. I've actually found that the plugin fails to copy a majority of previews.
Lightroom will copy managed raw files, but will just point to referenced raw files. If you choose to copy previews, it will copy all previews. Not much to the plugin, but it helps to know to pre-tag images in Aperture, and make sure you do some sort of file-level compare to make sure everything is copied over. I've made several posts on these issues under "Photo Enthusiast" in this forum.
https://forums.adobe.com/community/lightroom/content

Similar Messages

Not seeing all photos in Project

I have one project that shows all photos contained in the albums below it, but another project does not. How can I fix this?

I have a similar problem where I have several projects that the photos are not shown. If I show project info it shows the number of photos that should be there; however I can not see any in the project?
I can find the photos in finder in the location I told Aperture to store the files.
The project was in tack and viewable when the photo's were imported, and at some point they are missing?
It is not a filter or tag, I have been through that route, and this set to "all photos".
I have approximately 35,000 photos that are in about 40-50 projects.
I am currently disappointed in the performance of the file system of Aperture, and the fact that I have been plagued with crashes and lost files.
Any help appreciated,
Robert

Lightroom is not importing all photos in a folder

I shot with lightroom on my mac tethered to my camera
The images are not all showing up in lightroom but are showing up in bridge. I have tried two computers to view this with lightroom

OK, so converting tags back and forth does not seem to help. The only way I've been able to get iTunes to recognize these tracks is to completely remove the id3v2 tags. If I readd the tags after that, it works too.
I have around 5000 tracks (randomly located, of course) that are messed up, so my only option would be to use some tag program to remove all tags from my library (around 15,000 tracks), and then to readd them. Not an attractive option.
I'm really pretty disgusted with iTunes at this point. It seems that, well, 1. using it to convert my id3v1 tags to id3v2 screwed up a good chunk of my tags, and 2. any other mp3 player can recognize these tracks.
Between my wife and I, we have 3 ipods, so it would be nice to get some support directly from Apple at this point. Sorry to vent, but my wife wants to kill me because she can't get the Smiths or the White Stripes, among many, many others on her ipod. Argh....
Windows XP Pro

Transfer Aperture library to Lightroom

I have to make the switch to Lightroom as my current main camera, Leica M8, is properly supported only by Lightroom.
Now after downloading Lightroom 1.0 I am trying to figure out a strategy how to transfer my old Aperture library to Lightroom. Of course I only plan to transfer originals - I have to accept that all my adjustments in Aperture are gone.
But more importantly what is a good way to transfer the existing folder & project structure of Aperture to Lightroom without too much extra work? The export function of Aperture seems a little bit limited to automatically generate a folder structure on my HD which is identical/similar to my projects and folder within Aperture.
Any idea?
Thanks
Tobias

You are correct, all Aperture settings will not move to LightRoom.
However, Lightroom adjustments are interchangeable with the new ACR 3.7 and ACR 4.0(CS3 beta).
ACR now supports more than 150 cameras, including the Nikon D40 and the Pentax K10D. And though the cameras don't appear on the official compatibility list, Phase One shooters will be happy to know that Lightroom and ACR now (unofficially) support a number of P1 cameras (H20, H25, P20, P21, P25, P30, & P45), and Fuji customers have preliminary support for the S5.
Transfer your data from Aperture one project at a time.
Build a similar directory structure as your project/folder structure in Aperture, then go into each project and export masters to the corresponding external structure.
Exporting masters is quick as it is only copying data.
Just do it, get it over with
Then fire up LightRoom and import.

Aperture Library Importer name is not unique error

When importing my archival Aperture library into Lightroom I get the error "name is not unique:" and then the name that is not unique.
In my case the name in question isn't a project within Aperture but a Facebook album posted long ago using photos from Aperture. I haven't had my Facebook account linked to Aperture in a long time, but Lightroom throws this error now.
The published album shows up nowhere in my Aperture library. The Console app shows "1/2/15 5:22:06.979 PM Adobe Photoshop Lightroom 5[13255]: Oops! An untagged string (name is not unique: In Which There Is A Flying Train_1) got thrown far enough that we display it to the user. This shouldn't happen."
One of the other Aperture libraries I imported also used to have my Facebook account on it, but it also does not have that anymore and the published albums were removed.
How can I get around this and successfully import my library?

I get the same message and then after name is not unique it says: iPhone. were you able to find out what the issue is?

Can not sync all photos in Aperture into Iphone 5

I can not sync all photos in Aperture into Iphone 5. It always can sync some photos into 5. Then finish and prompts: "itunes can not synchronize (other)thousands of projects, and see more information in itunes". That means most of my photos can not seen on Iphone 5, it seems just can't import to 5. Is that the problem of Iphone or the pictures in Aperture, or even just because lack of sufficient space?

Solved here...
Photos app not syncing with iTunes

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

Why does iphoto not copy all photos when transfering

Hi peeps.
why does iPhoto not copy all photos from an event when im copy/pasting to an external folder on my mac(for later transfer). All softwares are up to date and ive only just realised it happens, but when i copy all pics in an event then paste in a folder, the pic count is substantially different. for example i select all pictures in an event called 'new1', the count of files is 188. i then copy/ paste to a folder, select all files and check 'info' and it says 141 files???
all i can see painstakingly going through to compare which images are in each place is that the ones that arent in my new folder , seem to be the ones ive edited in iPhoto?? conincidence? or am I missing something fundamental here? Ive only just realised this is occuring. The trouble is, after moving images to folders/hard drives I subsequently delete them from iphoto to keep my macbook airs HDD with some space. So basically all of the versions of pictures I want, i.e, the new edited and adjusted versions are no longer! NOT HANDY!
help please.

We've seen a few reports of this in the past while and no one is sure of the cause.
Use the File -> Export command. See this User Tip
https://discussions.apple.com/docs/DOC-4921
for details of the options the Export Dialogue offers.
If you're interested in your Photos then this workflow
The trouble is, after moving images to folders/hard drives I subsequently delete them from iphoto to keep my macbook airs HDD with some space.
means you are losing quality, metadata and the version of control. If you don't want these why use iPhoto at all?
You could just move the whole Library to an external:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Aperture is not showing all photos in photo stream.

Aperture is not showing all photos in photo stream. I have re-set photo stream from within the aperture app, but it only downloads a small fraction of my photo stream. Any ideas?

Sorry but you're wrong, as the article that you quoted pointed out
Since your Mac has more storage than your iOS devices, your photos automatically download and your Mac keeps every photo from your Photo Stream by default

Aperture 3.2.1 not importing all photos from card reader

Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still, like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
i had to force quit aperture, ejecting the card from the reader, aperture, on relaunch was still seeing the card as present but it was ejected from the finder , and physicaly on the desk.
i had to go in Apple Acticity monitor to find a process that was still active , someting called mass media and had to stop it.
my work around was manually copying the content of the card on the external hard drive about 9 gig of photos on the external HDD where i keep my aperture photos. copying 9 gig of photos over usb2 took an 50 minutes.
i had jpegs raw and some videos in 720p
i have a MBP 2.26 ghz 13"
a Canon 7D and a Lexar 16 gig compact flash card.

Macuser72 wrote:
Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still, like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
I'm sorry, but I can't understand this paragraph. It seems like the "loading assets" message stopped but not all the photos were showing up in the import window. Were any of the photos duplicates? How long did you wait until you forced quit?
When you say "the first time it loadedthe pictures" you mean you attempted before and got the same result?
It does seem like it is either getting stuck on an image or is taking a long time to read the images off the card since the import button is not available...
When you copied the files to your external drive, you were then able to import to Aperture?
Thanks

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Just transferred all photos to MacBook pro

Just transferred all photos in iPhoto library from imac to MacBook pro and when I click on some of the thumbnails it comes up with the triangle warning icon. Can I fix this?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Obvious question: How - and what - did you transfer?

Iphoto 11/Part of Ilife does not display all photos in "photos" or "events"

I am running latest version of everything, just loaded ILife. Iphoto 11 does not show "ALL" photos when I use "photo" or "event" view. It shows some....when I cycle down through the Blank images in these views, it will often show the pictures as I mouse click down.....but as soon as I take my finger off the mouse, everything (well, almost everything) reverts to blanks.
There is nothing selected to be hidden.
I have "Faces" set up and now when i look through an individual "Face" file, there will be intermittent Blanks.
Very screwy, anybody Help????

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I'm getting a message that my iCloud storage is almost full (5.0 GB, 186 mb remaining). I have transferred all photos from iPad and iPhone to Mac. I've deleted all but 200 photos on each of these devices. Data storage is still same.

I have transferred all photos from iPad and iPhone to Mac. I have deleted almost all photos from both (about 200 remaining on each). I do not store tunes or videos. After making these changes, I still have the same message in iCloud.

Go to Settings > iCloud > Storage & Backup > Manage Storage > Select your device (listed as 'This iPhone' or 'This iPad') then look at the next backup size. Compare the 'Next Backup Size' to the 'Backup Size' on taht same screen. If the next backup size is smaller, then you have successfully removed some content from your device.
Now the question still lingers as to why your iCloud is still showing so full right? Well, iCloud keeps the last 3 backups from each device. It doesn't duplicate them, but it uses an incremental backup system. So basically your device's backup will take up as much space on iCloud as the largest backup of the last 3 backups. With that being said, your iPhone and ipad will eventually shrink the size of your backup (if that next backup size is smaller) in about 3 days (3 backups assuming your iOS devices backup once as day when you are sleeping).
Can I expedite this? Well of course you can. If you want, you can Delete the backup from both of the devices via that same screen then go back to Settings > iCloud > Storage & Backup, turn iCloud Backups back on, then backup now. Keep in mind that if you do this, it will clear out your last 3 backups (and cannot be undone), but it may also take a long while for your iPhone and iPad to complete that inital backup after deleting the old backups.
I hope this helps. (My Recommendation: Basically check what's in paragraph one, then it will works itself out in a few days.)

Aperture library to lightroom plugin not transfering all photos or projects.

Similar Messages

Maybe you are looking for