Aperture Locks Up and Won't Open Selected Library

I recently did some housekeeping on my system drive..... now Aperture does not connect to the managed library or vault. The library is on a separate drive and shows 40 gigs.
I have done the following:
1. Re-Installed Aperture and set the Library location in preferences.... all I get is the spinning wheel.
2. Started Aperture holding down the option key and pointed to the library or vault..... all I get is the spinning wheel.
I obviously messed up something when I did my housekeeping, but I thought re-installing the program would fix that issue. I've searched through the posts and forums and can't find a similar problem. Any ideas? I'm stuck!
Thanks!

You should try to rebuild your library. There is a way to force Aperture to rebuild the library on startup through a key sequence which I do not remember. I know I had to do this once when I was in a similar situation as you.
Here is a link that talks about how to do it
http://aperturetricks.wordpress.com/2006/07/10/aperture-trick-54-library-rebuild /

Similar Messages

LV crashed. VI locked up and won't open!

Hi there,
I have been crunching for hours in LV6.1. NI changed the AI Read so that it dumped out a waveform, vs. an array. Since I was having difficulties working with the waveform, I pasted in an older 'AI Read' subVI that had an array output.
The program would crash the odd time, but not enough to cause a headache. And then the big one came. LV crashed! This time I couldn't even open up the VI. I double-clicked on it, and eventually it went looking for itself. When I navigated to the proper location, it didn't recognize the VI! What do I do? I have hours of 'inspired' programming in there. Has anybody seen this type of behaviour? I am desperate and tearing out my hair. Luckily I have some to spare...
I have attached
the VI (if you can open it!). Thank you in advance for your help.
Regards
Babu S. Rahman
Attachments:
fdb_fh_oldAI.vi ‏251 KB

The AI read is a polymorphic vi. You can change its properties so that it outputs a standard array, just like in older versions. Perhaps using the LV 6 AI Read w/ a different output type will alleviate some hair loss.
Check out:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bb88081be07d874a862569830004588a?OpenDocument
2006 Ultimate LabVIEW G-eek.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

HT1495 When I try to open iTunes on my PC it it's locked and won't open?

When I try to open iTunes on my PC it it's locked and won't open?

Hey itunesilliterate1,
Thanks for the question. I understand you are experiencing issues launching iTunes on your Windows computer. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you are on a Windows XP system, and receive a “Disk is locked” error when opening iTunes, see this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866
Thanks,
Matt M.

I have an older Power Mac G5 running 10.4 11. When I open Keychain it is locked and won't open on restart or when I use my administrator password

I have an older Power Mac G5 running 10.4 11. Key chain seems to have locked itself ? When I go to open Keychain it is locked and won't open on restart or when I use my administrator password. I thought the keychain password was the administrator's password and that it would open on restart. If this isn't correct, how can I open Keychain ?

Click here and follow the instructions.
(63958)

Links to web page in any mail message will cause Mail app to hang, and won't open Safari.

Repeatable problem on iPhone or iPad.
Any link to a web page will cause Mail to lock up and become unresponsive, and won't open the web page in Safari.
The only way out of this is to back out to the home screen, double-click on the home button, then select the Mail app icon, holding it until I can "close" it. I can then relaunch Mail and look at any message I want just like normal. But if select any link, whether a text link or a picture in an email, the whole thing happens again.
Occurs on both my iPhone 5 and my iPad both running iOS 6.0.1.
Any suggestions that will allow me to go directly from a mail msg to a linked web page embedded within?

You ran a defective third-party "utility" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

HT1386 After last syncing between iPad3 and iMac, many books I have purchased have cloud symbol and won't open. Afraid to resync as one very large book didn't sync to iMac and afraid of losing it. How do I get these books back?

1. After my last synching between iPad3 and iMac, most of my downloaded books have a cloud/arrow symbol and won't open. Most PDF files in iBook just disappeared. I am afraid to resync as a book I recently downloaded, which took up a big chunk of my 5GB download limit, doesn't appear on my computer and when I try to sync, I get the message that all my books will be replaced.
2. Is there any way to read the books downloaded to my iPad on my iMac? Can I download an Ap for that?
I am really disappointed in the interface between my iPad and iMac and the fact that I can't selectively delete items (music and photos) that I have synched to the iPad. It seems like Apple if going toward the Microsoft method of trying to do everything for you, rather than allowing the user to manually do things.

In iBooks on the iPad every book you purchased will be on the Purchased Book collection. Those books that you have purchased in the past but for some reason are not actually on your iPad are still available in the bookstore. They will have the cloud symbol on the corner. You can tap on that book to download it again. You will not be charged for doing this.

What do I do when my iphone three is locked up and won't even hard reboot?

What do I do when my iphone 3gs is locked up and won't even hard reboot?

To hard reboot your iPhone 3GS hold both the sleep/wake and the home button at the same time and it should shut down, wait a few seconds before shutting it back on. Also you can hook your iPhone up to itunes and under the iPhone screen select restore to bring the phone back to a clean state. That may help in cutting down on how much it freezes, but make sure you back it up before you do do this if you wish. That way you can restore your old data.
Hope that helps. ^_^

Firefox remains minimized on taskbar and won't open or maximize

Solution found:
I solved the issue of "Firefox remains minimized on taskbar and won't open or maximize" and tried to post a reply but it said the thread is closed.I press alt tab until the firefox minimized icon on the task bar is highlighted and then press winkey [uparrow] ... this maximizes selected minimized windows. This only seems to work if using alt-tab to select the window. When clicking with the mouse, it doesn't seem to work.Good luck!It was driving me nuts!
Dan

Thanks for the report. Similar recent thread: [https://support.mozilla.org/en-US/questions/941896 When I go to open firefox it shows up on my tool bar but not on my screen where is it?]

Aperature hanging up and won't open?

Since the last software update my Aperature program hangs up and won't open, intermittently. Who do I talk to about this? I bought it through the App store on i Tunes.

What version of Aperture and what version of the OS are you running?
What happens when you try to open Aperture, error messages, error reports, etc?

My recovered files are red and won't open

My Toshiba external hard drive broke and a friend used a program on his mac to recover the files. He says it worked but now all the files are highlighted red and won't open. The file sizes look right, but for instance when I try to open a .mov file it says, this is not a movie file. Does anybody know what the problem is and what I need to do to get the files usable again?

Thanks, Courcoul. I did Get Info and changed all the permissions to Read & Write for Me, Fetching, and Everyone. Still doesn't work. But, if I click on the picture of the Lock to Unlock it, I can't do that, because it's a work computer and they don't give me admin privileges. So maybe that's the problem? Though I don't see why. I use to be able to open all the files on my computer.

After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
before the upgrade, i could open time machine without the need for having the back up disk plugged in.

Ok. I got it to work, sort of....
As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

Ipod stuck in lock mode and won't connect to Windows computer

My Ipod is stuck on the lock position and won't connect to my computer when I plug it in. The hold switch moves back and forth just fine and it was working perfectly yesterday. It's the classic nano that's square. It's stuck on a song that I used as my alarm yesterday morning. I haven't turned it on since then and when I pushed the on switch, it went to the screen but then wouldn't do anything else. I've tried to hold down the menu and middle button while moving the hold switch, but it didn't work. Please help!

I fixed it! I had to switch the hold button from on to off to on again and then held the menu and middle button down at the same time. It works just fine now!

The latest Pages won't save new docs and won't open some old ones. What do I do?

The latest Pages won't save new docs and won't open some old ones. What do I do?

Then you have two version of Pages on your Mac.
Pages 5.x is in your Applications folder.
Pages '08/'09 is in your Applications/iWork folder.
Peter

Aperture Locks Up and Won't Open Selected Library

Similar Messages

Maybe you are looking for