Aperture not reading DNGs created from some E-M5 raw files
Aperture happily read DNGs created from dpreview's Olympus E-M5 sample raw files using Adobe DNG Converter version 6.7.0.339. However, it refuses to read the raw files created by E-M5. Is anyone getting this to work? If so, how?
—Andreas
Check the version of the Digital Camera RAW Compatibility Update that is installed. Your camera should be supported by update 3.13: The version of the raw support is shown in the About panel: from the main menu bar:
Aperture > About Aperture
Supported by Digital Camera RAW Compatibility Update 3.13
Canon EOS-1D X
Nikon D800E
Nikon D3200
Olympus OM-D E-M5
Panasonic LUMIX DMC-GF5
Sony Alpha SLT-A57
Download the latest from here:
Digital Camera RAW Compatibility Update 3.14
If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie
Similar Messages
-
LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.
Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.
-
My Mac Mini will not read TDK disks from my iMac G3.
My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJGTry disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode -
My n82 is not reading my pictures from card
hy, I have a nokia n82, everything is working just fine, but this phone is not reading my picters from card, not even one of theme, pictures from phone memory are opened.
Everything else is working from card, music, videos, office doc., pictures...no. can anyone help me? maybe i did something wrong...a setup or something?????babdi, I think the hard reset is not the solution to ALL problems let's first try some things before recommending doing hard resets for all problems.
in this case the likely problem is a corruption with the Gallery database in the Memory card. But it's hard to pin down.
There are several things to try I wouldn't keep doing RESETs of the device as you may not solve the problem and you are wiping all your settings, and files.
The problem is either in the \private folder in the Memory Card or some other file in the \sys or \system folders there.
You can try deleting some folders or backing up YOUR files from the memory card then re-formatting. Just don't make a copy of ALL the contents from the memory card, only the files you put there. The other files will/should be recreated automatically.
640K Should be enough for everybody
El_Loco Nokia Video Blog -
My Phone 4's is not reading my touch from the screen in certain places
My Phone 4's is not reading my touch from the screen I when I pus numbers It give no response but a little Higher or lower and it reads?
Dear Friend,
Sounds like your idevice has some cover film on the screen surface. Try to replace it for a new one.
Hope it helps -
"Not Read" receipt received from sender for all emails sent.
We recently migrated from Exchange 2010 to Exchange 2013 and I've got one user that started having a strange problem after the migration. She has Outlook set to request a read receipt for all emails that she sends and that works fine except that
for every email she sends, she gets a "Not Read" receipt back and this not read receipt comes from her as if she sent the email to herself and didn't read it. She also get the not read receipt if she deletes emails that are in her sent box
and again, the not read receipt comes from her.
This user is using Outlook 2007 SP3 with all available updates installed. We've tried a new profile and we've also tried on a different computer with the same results. She doesn't have any rules set up except for the one for clearing categories
that I believe is a default rule. I've checked the settings of the rule and there is nothing there that would be causing this. The other strange thing is that these not read receipts seem to come in batches. If she sends one email the the
not read receipt doesn't show up or at least not immediately. If she sends 2 or 3 messages then she'll get all of the not read receipts for those 2 or 3 messages at the same time.Hi
Please check this thread
http://social.technet.microsoft.com/Forums/en-US/2dbf0122-8d63-4375-91b4-6ba2cf52ed2e/not-read-receipt-to-senders
Tell the senders to stop sending messages with read receipts and it wont be a problem
And to To determine the problem, Please test the feature on local side to check whether the symptom occurs. Meanwhile, you can let the sender in remote domain send message to other domain to
check the result.
Cheers
Zi Feng
TechNet Community Support -
B2B adapter is not polling any data from EDI X12 810 ECS file
Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AMHi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code B2B-50547
Error Description Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id 7F00000113CFC36785C0000017D7E2B0
Message Id 7F00000113CFC36785C0000017D7E2B0
Business Message 7F00000113CFC367A450000017D7E2B7
Packed Message Packed Message
Payload Payload
Protocol Message Id EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest Message Digest
Digest Algorithm
Transport Protocol File
Transport Protocol Version 1.0
Url file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates certificates
State ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size 2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM -
Got this msh from Piasa...any ideas? 'Could not read the iPhoto Library. The library at [file path] has a corrupted AlbumData.xml file.'
Contact Adobe support - that is not an iPhoto message - in general Piasa has no ability to access the iPhoto library - there have been hacks but often they do not worka nd can cause problems
You need to user either Picasa or iPHoto - using both on the same photos is problematic
LN -
How do I stop aperture from reprocessing my my raw files on import
how do I stop aperture from reprocessing my my raw files on import
Here's the thing: You didn't shoot in B&W and the Raw is in colour.
Your camera shoots everything in colour because that's what the sensor in the camera is - RGB. For B&W shots what happens is that the camera adds a display tag to the shot - and this is written to the Jpeg you shoot, and so it displays.
But a Raw is a sensor dump from the camera. This is all the data that the camera has, and all of that is in colour, so it shows in colour on Aperture.
Convert to B&W in Aperture or shoot Jpeg.
Regards
TD -
Apply Adobe Photoshop to astrophotography requires numerous images to be converted from a raw CR.2 file to TIFF files. Does Adobe offer an app to perform a batch conversion from Canon CR.2 raw files to TIFF files?
Thanks.Trevor.Dennis wrote:
Note the option to open the first file and apply settings.
Personally, I'd be nervous of batch processing RAW files because they can need significantly different treatments file to file, but it is doable. I would assume that Image Processor would allow the XML sidecar files, so you would have the option of looking through and fine tuning any files that were not up to scratch.
You do not need to use that option. There are two other options. If the RAW file has never been process by ACR then ACR would use your defaults for the cameras used no ACR dialog UI will display. If the RAW file has been process by ACR there are ACR settings either in you ACR database or in your RAW files sidecar files in the same folder as the raw file these will be used.
I will often use the Bridge to process groups of RAW image files that look like they have similar exposures looking at the thumbnails the bridge displays. ACR will open for the group of RAW files. I will process one RAW file and sync the settings to the other image in the group. I may also make other ACR setting for some in the group like crops or spot healing for dust that may be in some sykes because my sensor needed cleaning. When I'm done all I do is click on the DONE button in ACR so it will save out ACR setting for all the raw files in the group. No image files are saved. When I use the image processor script I never use the open first RAW option and the Automate Image Processor Pro plug-in script does not have that option open first RAW in ACR and use the setting set for all other RAW files.. -
Aperture 3 fails to open Leica D-Lux 6 RAW files
Aperture 3 fails to open Leica D-Lux 6 RAW files. Any patch coming soon?
Sorry, but we don't know. This is a "User to User" forum - you are not talking to Apple.
You might consider to import "raw&jpeg" while you are waiting, so you will have the raw available, when the raw support will be released.
Or use the software, that came with your camera, to develope the raw and import tiff to Aperture, while you are waiting.
Regards
Léonie -
Speedgrade cc not reading avi timecode from avi created by premiere cc
timecode is selected to alwayas read. Quicktime works, why not avi?
Yes, is true, SpeedGrade doesn't read avi timecode. I don't understand why not
-
DNG (created from EOS 350D) sometimes unsupported image format...
I've imported some DNG files created from EOS 350D .CR2 files (Compressed, preserve RAW image, JPG preview full size) and I keep getting unsuported image format. Now .DNG files without fill size jpeg preview do show well (these where also created with DNG Converter 3.1).
This jpg preview size shouldn't matter I hoped. I switched to a .dng based workflow since August, all my latest photo's can't be handled with Aperture....Thanks for the info!
I hadn't checked out the specific 350D support, since I though (hoped) that once using .dng (without the embedded original .cr2 file), it was a pure .dng thingy, in that sence that it doesn't even have anything remotely to do with the original .cr2 raw file anymore, since that's just the reason why I use .dng.... I guess the .dng implementation in 10.4.3 is not done completely as it should then.
Anway, I'm thriled I can use the compare, select, loupe (simple but well implemented!) in Aperture, which rocks. (There are some gems in Aperture for sure, next to th numerous odities.
Thanks again!
Regards,
Merg
iMac 2GHz/1.5GB RAM Mac OS X (10.4.3) -
Aperture Not Displaying Altitude Metadata from Camera
My camera records GPS data including Lat, Long and Altitude. When I import my images into Aperture 3.5.1, the metadata shows the Lat and Long information but Altitude shows up as 0m.
I know for sure that my camera is recording the altitude information because when I use the OEM software supplied with the camera I can see the altitude data in the JPEG file.
It also appears that when I import photos into Aperture with GPS data it seems to strip the altitude metadata from the file.
I saw a similar question asked previously: Is this a bug in Aperture that it will not read/accept Altitude metadata from certain cameras?Is the altitude stired in the EXIF tags?
When I import image files with EXIF tags for GPS, I will see in Aperture all tags, that are also visible in Preview. For example, in Preview:
And after importing into Aperture:
I have never seen Aperture stripping EXIF data from the original image files, only not displaying EXIF tags, that are camera specific. But the EXIF tag "Altitude" is always displayed correctly in my library, if it is set. I suspect, that your camera is using a different tag, so the camera software understands it. So, as a test, check, if Preview can show this tag.
-- Léonie -
Bank account number not reflecting while creating invoice some parties
Hi All,
We are facing following issue while creating invoice's for some particular parties.
Bank account number is not reflecting while creating invoice at invoice work bench from front end. Bank account details are properly attached at party site level.
Kindly guide us regarding this.
Thanks,Hi Team,
If you are getting XXXX in place of Bank number then the issue is at (Setup > Payment >Payment Adminstrator).
Log into Payments Setup > Shared Setup > System Security Options. Now you will find "External Bank Account Masking Setting" & Number of Digits to Disp . Now provide the numer of digits to display.
Thanks
Vinod K
Maybe you are looking for
-
Is there a way to restore more than one MacBook Pro at the same time from an image? .
I restore each MacBook Pro one at a time from an Mountain Lion image on a firewire Hard Drive but each MacBook has to be done one at a time. When I re-image the PC's here at work I'm able to Ghost as many laptops I want simultaneously. Thank you
-
I am trying to copy the music from my mac to my iphone 5s
I have purchased the Iphone 5s, so I am assuming i am half way there as the IOS7 is already installed, I cant figure out how to install itunes 11.0 on the iphone so that I can sync my play lists etc every time i plug it in it comes up with a must ins
-
How to display smartform as PDF in web dynpro java
Hi, Where can I find sample program to display smartform as PDF in web dynpro java. Thanks. Regards, Henry
-
What is iOS ?
-
Making my music available to another user
Hi, a quick question... I have two users using my MacBook Pro, and I want all the music that is available to me to be playable by the other user too. I have managed to set up persmissions so that the other user can access the Music directory on my ho