Aperture not supported by Maverick upgrade

I've just installed Maverick upgrade on my iMac desktop and then went to work in Aperture (the program I use most on my computer!) and got a message that you cannot use Aperture with Maverick! What! Does anyone know how I can get Aperture to work?? If not does anyone know how I can go back to OS X Lion system?
Thanks!

They only way to go back to an earlier OS is to install it from your backups. So to re-install Lion you would need to have a backup of the system when it was running Lion.
As for Aperture and Mavericks, while later versions of Aperture will not run on earlier versions of the OS (Aperture 3.5 will not run on Lion for example) older versions of Aperture will run on latter versions of the OS, though not always well. So Aperture 2 will run on Mavericks but will have problems.
Not sure just what message you got, the exact wording would be nice to have, a screen shot of the alert box would be best as well as the exact OS version And Aperture version installed on the machine.
Without that it is hard to say just want you need to do to get Aperture running.

Similar Messages

Upgraded to Mavericks now Aperture not supported

I finally upgraded to Mavericks, and now Aperture not supported and getting this message. No upgrades are available in the iTunes/App store either. Any suggestions?

If you did not buy Apeture from the AppStore, you can download an update to Aperture 3.4.5 from the Apple Support Downloads page:
Aperture 3.4.5
Backup your Aperture library before you run the update installer and open Aperture for the first time. The upgrade from AP 3.2 to 3.4.5 will upgrade your Aperture library to a new format and that will completely rebuild the library. It is safer to have a backup. Aperture needs to be installed in the "Applications" folder, not a subfolder of Applications, and be called simply "Aperture" without any add ons.
After that try again to update to Aperture 3.5 from the AppStore. If you did not buy from AppStore, this update will change your Aperture licence to an AppStore licence, so be sure to sign into the AppStore with exactly the AppleID that you want to use for updatig and buying software.
For some posters here the Aperture 3.5 update was not visible, unless the primary sytem language was set to "English U,S," and the region to "United States". If you are living in a different country, try to change the "Language & Region" settings in the System Preferences and restart the system, before tring to update.
That should also trigger updates for the iLife apps and iWork.

Why is the Power Pc application Not supported on Maverick?

The MS product is not supported on Maverick Why?

Here is the summary I often post to answer your question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 7 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion and now the "free" Mavericks.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

LDAP synch not supported during OIM upgrade from 9.x to 11g

Hi Experts,
Following line is mentioned in OIM upgrade guide for 9.x to 11g (http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm)
“LDAP Sync is not supported when you upgrade from Oracle Identity Management 9.1 to Oracle Identity Management 11g”
Please help me in understanding the above line.
I have a pretty simple setup of OIM (version 9.1.0.2) with AD and Exchange connected. I guess I don't have any impact of above line.
LDAP synch is required when we integrate oracle identity manager with oracle access manager.
Please suggest.
Thanks
M S

Yes LDAP Sync has most of the features when you have OIM and OAM integrated with each other. You can go ahead with upgrade if LDAP Sync is not part of your requirement.

Notes problem after Mavericks upgrade

Notes will not sync after Mavericks upgrade, other apps - mail & contacts & calendar do sync

First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

MY HP MF 1005 PRINTER IS NOT SUPPORTING IN MAVERICKS 10.9 IT GET PAUSED WHEN I PRINT A DOCUMENT PLA SOLVE MY PROBLEM .

MY HP MF 1005 PRINTER IS NOT SUPPORTING IN MAVERICKS 10.9 IT GET PAUSED WHEN I PRINT A DOCUMENT PLA SOLVE MY PROBLEM .

Hi Shiba,
I understand that your printer is not printing picures as expected. I know you stated that you had tried troubleshooting steps above. Where you able to take a look at this document? Are you printing from a mobile device or computer?
Hope this helps.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Aperture NOT SUPPORT Fujifilm X-E2 RAW FILES

Can Anyone inform to aperture to please fix Raw Processing of Fujifilm Cameras in Aperture 3.2.1 in todays world when things are changing so fast still aperture is very behind which not support Raw Files from Fujifilm Cameras...

Aperture is supporting quite a few Fuji cameras, see: http://www.apple.com/aperture/specs/raw.html
Fujifilm
FinePix S2 Pro
FinePix S3 Pro
FinePix S5 Pro
FinePix X100**
X-Pro1***
X-A1***
X-E1***
X-M1***
X20***
X100S***
Only for the newer cameras the raw support has been released as part of the newer operating systems. You need Aperture 3.4 or later to be able to use the raw support for the X-series cameras.
Since you are running OS X 10.9.2, you could update to Aperture 3.5.1 and use the raw support for the Fuji X-E1. I expect, that any raw support for the successor Fuji X-E2 will also be released for the current Aperture version and not the older Aperture 3.2.1.

Simcard not supported after ios upgrade

after upgrading my iphone3G, i tried starting my iphone and a picture of a USB showing connection to an ITUNE icon pops up with a message saying "simcard not supported" and "emergency calls only" now my iphone is useless. CAN SOMEBODY HELP ME PLEASE!! really need ur support.

has your phone been 'unlocked' for any network sim to be used? because if you update your phone this can sometimes be cancelled depending on how it was unlocked. if so, you will have to have it unlocked again (if it can be unlocked) or use a sim card with the correct network sim.
hope this helps ;0)

E-mail reader does not support MIME: please upgrade

After receiving an HTML weekly online newsletter with no problems for months, I suddenly got a LISTSERV message asking me to confirm that my e-mail account actually does exist. The message said the error was this: Your e-mail reader does not support MIME. Please upgrade.
Since I have the latest version of Leopard (which I sincerely wish I had NEVER installed, but that's another topic), I don't know what I am supposed to upgrade to!
In addition to this, when other people forward me e-mail messages, the series of e-mails they forward now appears as a MIME attachment. I can get to it by double-clicking on the attachment, but it's a pain.
Any suggestions?? Many thanks.

f I choose to see the emails I send to my hotmail account on the internet on my computer and not on the phone, I can see that everything should be okay, everything gets received exactly as it should. And if I select feature on my Nokia E72, which means that I can "hear" the email, I hear the e-mail has all the words and phrases in the email I sent to the e-mail account on the phone. Strange! : (

Canon ir2525 not supported by mavericks?

After I updated my Macbook Air to 10.9 Mavericks the driver for Canon ir2525 no longer works. I get error message saying "Printer is not supported".
I know printer still works because a Mini running 10.6.8 still prints ok to the Canon, and both computers still print to a HP LJ 1022. I tried re-installing printer under preferences with no luck.
Fix soon? Or do I need to restore backup?

Canon 2525:
Status:          Idle
Print Server:          Local
Driver Version:          2.0
Default:          No
Shared:          No
URI:          cntdbmu://MCD_UFR2_LPR/Canon_2525/lpd://10.0.1.9/
PPD:          Canon iR2525/2530 UFRII LT (US)
PPD File Version:          2.0
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.7.0 (cups-372)
Scanning support:          No
Printer Commands:          AutoConfigure Clean PrintSelfTestPage
CUPS filters:
cupstomcdufr2:
Path:          /Library/Printers/Canon/UFR2/Cores/cupstomcdufr2/Contents/MacOS/cupstomcdu fr2
Permissions:          rwxr-xr-x
Version:          2.43
commandfilefilter:
Path:          /Library/Printers/Canon/UFR2/Cores/commandfilefilter
Permissions:          rwxr-xr-x
Fax support:          No
Printer utility:          /Library/Printers/Canon/UFR2/Utilities/Canon UFRII Printer Utility.app
Printer utility version:          2.43
PDEs:
FinishingPDE.plugin:
Sandbox compliant:          Yes

Why does Aperture not support all DNG files?

I have a Leica D-LUX 2 and an Epson RD-1. Both of these cameras create RAW files which are not supported by Apple. Why should the files, when converted to DNG, still require RAW support to be utilized. I understand the wrapper concept, but is this not the idea of DNG. What about cameras that create a DNG file, rather than RAW (i.e. the new Leica M8).
Thanks,
Ken

Hi Kenneth,
You're missing the point Karl is making. RAW data is (in essence) proprietary to the camera. All DNG does is essentially encapsulate that proprietary data in a standard format. The data is still proprietary whether DNG or RAW.
By proprietary I mean that the sensor array and sensitivity to light, tonal correction across the gamut all are understood by the camera manufacturer and held as parameters (data) in the RAW or DNG file. It requires specific knowledge to interpret this data into a renderable image. Until such time as camera manufacturers agree that 1 = 1 and 2 = 2, we are stuck with this issue (and ALL our concern of x years from now when nobody supports what is our latest and greatest camera). An API included in Aperture (actually OS X) would at least allow camera manufacturers to write their RAW conversion algorithms and take Apple out of the loop.... as well as take dependence on OS X releases out of the loop too!
Hope this clarifies.
G.

AFP Connection to Windows Server 2011 via MacServerIP 'not supported' by Mavericks?

Until recently my employer has been runnign 10.6 Snow Leopard on Mid 2010 iMacs, given that Mavericks is free, we're now looking at updating said iMacs.
The problem is we use an AFP server (MacServerIP by CyanSoft) as we've had huge issues with font resource forks getting corrupted when we used SMB.
At the moment, when I try and connect to an existing AFP share (even though AFP is still supposedly supported) I get the following error:
"the version of the server you are trying to connect to is not supported"
Gaaaahhh.. we really cannot afford to have our font database corrupted again, otf font's won't be affected, just type 1/postcript fonts etc that stores the actual font data in the resource fork..
Is this currently a Mavericks bug or is this 'desired behaviour'?
Thanks in advance all..

Looks like I've solved this myself so for the benefit of anyone else out there with a similar issue..
Ditch MacServerIP and install Group Logics ExtremeZ-IP instead...
As Gordon Ramsey would say (other than something that would be bleeped out)
'Done'

Imac not responding after mavericks upgrade- black screen

Ever since I upgraded to Mavericks 2-3 weeks ago ....if I leave my mac for a while and then try to wake it up with a touch of mouse or keyboard, the screen remains black. The mac is still on as its warm .The only way to recover this is to :
1. Pull out the plug - gives fresh reboot
2. Keep the start button pressed for approx 5-10 secs, then press it again and the mac powers up...to the state it was when left ie not a fresh reboot.
This is very annoying , has my wife yelling at me and no longer gives us the instant access from sleep we used to have ...
Any help appreciated !
Thanks Jon.
I have a 27" iMac from August 2010 (ie v soon after CPU upgrade) , core i3 processor

OK I appear to have fixed this ...after the Mavericks upgrade the screensaver was reset to loading photo's from "national geographic" which it did after a few mins...i have changed this to another option photo's of earch/space etc..now i can wake the imac from sleep immediately as before ....so now fixed !
Jon

Aperture not supported by Maverick upgrade

Similar Messages

Maybe you are looking for