Aperture Raw Update

Check Software Update. Raw files for the following cameras are now supported in Aperture 3 and iPhoto ’09:
Hasselblad H3DII-50
Leica M9
Leica X1
Olympus E-P1
Olympus E-P2
Panasonic Lumix DMC-GF1
Pentax K-7
Pentax K-x
Sony Alpha DSLR-A500
Sony Alpha DSLR-A550
Sony Alpha DSLR-A850

What is your Aperture version, Jack?
The Raw support for the NEX 6 is only available with Aperture 3.4, see footnote *** in http://www.apple.com/aperture/specs/raw.html.
Regards
Léonie

Similar Messages

  • Aperture Raw Update 5.07

    Aperture vers 3.5.1 has a new digital camera raw update 5.07 (build 760.1) that I successfully downloaded and applied to all my Aperture libraries - without any problems - and I am also able to upload Nikon d810 NEF/RAW files into Aperture 3.5.1 as well, with no processing problems.
    Please note that there is a new OSX update 10.9.5 that also needs to be downloaded to use the Aperture digital camera raw update 5.07
    Good luck 

    Dear Torreypines,,
    thanks for your reply. However I quoted the discussion "RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)" to illustrate my test method (uninstall and install an older Digital Camera Raw Update Compatibility).
    I do run the latests Aperture Update (updated directly from the Mac App Store).
    To illustrate, here is a screenshot of an IMessage discussion.
    Action : drag and drop a Nikon D7000 NEF file to the discussion and send it to an IPhone
    - Test 1 : Yosemite, Aperture, Digital Camera Raw... up to date => plain black
    - Test 2 : Older (5.07) Digital Camera Raw => picture ok (unfortunately, Aperture ko)
    This illustrate also what appends into ICloud. All NEF files uploaded since a few weeks are plain black into photostream on IOS Devices (Iphone and Apple TV).
    Kind regards,
    Jérôme

  • Anybody know where I can find Aperture RAW update 4.02?

    Doesn't seem to be showing up in the list of most recent RAW updates, looking for support for NEX-6.  Thanks!

    What is your Aperture version, Jack?
    The Raw support for the NEX 6 is only available with Aperture 3.4, see footnote *** in http://www.apple.com/aperture/specs/raw.html.
    Regards
    Léonie

  • Camera Raw Update 3.7 installation in Aperture 3.1.2

    I am using Aperture 3.1.2, wanted to install Camera RAW Update 3.7 for processing of RAW files from Olympus XZ-1. Following error message appeared: Apetrure 3 or Iphoto 09 needed for this update ??? Somebody else met this problem ? Thanks.

    Of course, sorry, that I did not make it. I did upgrade Aperture to 3.1.2 first and then I wanted to upgrade Camera Raw Data 3.6.4 to 3.7 and the error message came I mentioned in original thread.
    To solve the problem I did experiment and downgraded Aperture to 3.1, upgraded Camera Raw Update from 3.6.4 to 3.7 without problem and after that upgraded Aperture from 3.1. to 3.1.2.
    That worked w/o problems.
    Jaka

  • Raw update 2.4 supported on Aperture 1.5.6?

    Is Raw update 2.4 supported on Aperture 1.5.6?
    I have Raw update 2.4 installed, but get "unsupported format" message when I try to import raw files from Canon 5D Mk-II. Import works fine on raw files from Canon 20D.

    from here:
    http://www.apple.com/aperture/specs/raw.html
    you need aperture 2.x to work with the 5dm2 files ...

  • Aperture RAW profiles broken since 10.7.4 update

    Since updating to OSX 10.7.4 last week it seems to have broken some of Apertures RAW profiles for some cameras.
    My Nikon D700/D300 files are all fine but my RAW files for my Lumix GX1 are green!
    I also get the message "This Photo was adjusted using an earlier version of Apple's RAW processing" and then it offers me the option to Reprocess.
    This fixes the green issue but doing this file by file when you've imported over 100+ is a real pain. The RAW for the GX1 was supported and was working fine before updating to OSX 10.7.4
    Any ideas whats going on?

    See this support article: list: http://support.apple.com/kb/HT4757
    The support for the gx1 seems to have been moved directly into MacOS 10.7.4, and for Aperture this is a change of raw support.
    Regards
    Léonie
    P.S: Perhaps this will help:No guarantees, I never tried it:
    Re: This photo was adjusted using an earlier version of Apple's RAW processing

  • Apple Camera RAW updates without iPhoto or Aperture

    I couldn't find a place where this really fits so I am placing it here.
    I recently got a Nikon D90 and I take pictures in RAW format. I do all my editing in Adobe products so I have not bought Aperture or upgraded iLife. To be able to view the D90's files in CoverFlow and QuickLook requires the camera raw 2.3 update. However, you cannot install the update without Aperture 2 or the last year's iPhoto. This wouldn't be much of an issue since I don't generally sort my images in the finder, but every time I opened a folder with any raw files in it I would get frequent quick look errors popping up and the Finder would crash.
    I fixed it by downloading the Aperture 2 trial so it would allow me to install the update...but it's ridiculous that I should have to have jumped through hoops to get the update installed.
    Apple: Remove the iPhoto/Aperture requirement on RAW updates!

    Well, my updates install without a problem.
    "Camera RAW update" comes from Adobe and has absolutely nothing to do with iPhoto or Aperture.
    http://www.adobe.com/products/photoshop/cameraraw.html
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4364
    Apples, "Camera RAW Compatibility update" should install without a problem.
    http://www.apple.com/downloads/macosx/apple/application_updates/digitalcameraraw compatibilityupdate25.html
    The only time when I had a message "... not required..." was when I attempted to install the update while it was already installed.
    Two things to consider would be; one, that the Apple's update doesn't work 100%.
    It claims to provide RAW compatibility for Canon 50D, and yet the sRAW 1 and 2 don't show up in quickview or as icon preview (the full size RAWs do) - so maybe there's a similar issue with your camera.
    Second, (if indeed iPhoto is needed to be installed - which I doubt, as I don't have it), extract iPhoto from your Leopard disc, install it, install the Compatibility update and then trash iPhoto.
    .

  • I just did the photoshop camera raw update and now everytime I try to do a text box or change the text the whole program crashes.

    I just did the photoshop camera raw update and now every time I try to do a text box or change the text the whole program crashes.

    All fixed!!!  My Aperture wasn't being recognized because it was in a folder.  OK, now I can use my camera with Aperture. 

  • Raw Update 2.3 + Nikon D90 = Wrong White Balance Temperature

    Hi folks. Wonder if someone has had a similar issue and/or has any insights.
    Here's the background:
    - Aperture 2.1.2 on OS 10.4.11
    - Downloaded/installed Raw Update 2.3
    - Imported ~800 NEFs from a D90
    - On ~15-20 NEFs, pictures show up blue (white balance at ~2500)
    - The affected NEFs are semi-randomly distributed among the ~800
    Here's why it's weird:
    - NEF displays correctly in Nikon View (the thumbnail and full picture)
    - NEF displays correctly in the Finder (the thumbnail)
    - NEF displays correctly in the preview and thumbnail *in Aperture* but only until the preview and thumbnail processing completes at which point they turn blue (this is why it's especially weird)
    - Peeking into the Aperture package, the NEF thumbnail shows up correctly but the preview and thumbnail files show up blue.
    If I delete the NEFs from Aperture, close down, and repeat I get the exact same problem on the exact same NEFs. This leads me to believe that there's something specific to the NEFs but it must also be linked to Aperture and more specifically, it's thumbnail/preview process since they show up fine in Nikon View, the finder and Aperture before the thumbnail/preview processing takes place.
    Obviously I can't downgrade to Raw Converter 2.1 or 2.2 since my files are from a D90, and I shoot in raw (not raw + jpeg) only so have been limping along with Nikon's software.
    Any ideas out there?
    Thanks!
    Message was edited by: rbhansen57

    Hi,
    I simply can't see the NEFs.
    OS X 10.5.5
    Aperture 2.1.2
    Nikon D90
    Import runs fine, and the thumbs are there, but when opening a NEF a big thumb (7x4.5cm on the 24" screen) is displayed in the middle for a second, and then it turns into a dark red message "Unsupported Image Format".
    It's general - no NEFs work for me.
    I import directly into Aperture - do you import via the Nikon Software?
    Previously I had an Olympus E400 - the RAWs worked fine in Aperture (directly imported).
    My strange observations are:
    With the Olympus E400 (10MB) the size of the JPG files were 6-7MB and the RAW files (called .ORF) were 21MB.
    With the Nikon D90 (12.3MB) the size of the JPGs are around 6.5MB (4288x2848 pixels), but the size of the NEFs are just around 11MB (I did expect over 21MB) and the pixels are 256x170 (although the picture says 4288x2848 on the camera itself).
    I'm new to this support site - do Apple supporters take time to read our questions and join these discussions?

  • Digital Camera Raw update 4.02

    is out in software update. I don;t see it on the Apple site yet however.
    This from software update

    Discovered that the problem exists only with E-PM2 RAW files imported into Aperture before applying Digital Camera Raw Update 4.02. (I had been shooting RAW+JPEG since getting the camera, while waiting for RAW support.
    Found a solution:
    Select all the problem files. Choose "Reprocess Originals" from the Photos menu. Done.

  • Camera Raw Update for Nikon D800

    Does anyone know if there is a camera raw update for the new Nikon D800 in iphoto 08 version 7.1.5 and Aperture 2.1.4?

    There is Camera Raw update for he D800. It requires 106.8 or later, and iPhoto 09 or Aperture 3 or later.
    I woud not expect an update foriPhoto 08, Ap 2 or 10.5.
    Regards
    TD

  • D700 RAW update not working?

    I just installed the new raw update which adds support for D700 RAW files. When I try to view these, it now generates a mini-thumbnail (128x128px?) but won't generate anything larger than that... any ideas what's going on? I can apply adjustments and they take effect, but I still only see a mini-picture.
    Message was edited by: davidwittig

    Here is the step by step on how to solve this issue.
    http://blogs.oreilly.com/aperture/2008/09/the-great-migration.html

  • Camera Raw Update 2.0

    *Camera Raw Update 2.0* now available
    This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
    Hasselblad CFV-16
    Hasselblad H3D-31
    Hasselblad H3D-31II
    Leaf Aptus 54S
    Leaf Aptus 65S
    Nikon D60
    Olympus E-3
    Pentax *ist DL2
    Pentax *ist DS2
    Pentax K100D Super
    Sony DSLR-A200
    Sony DSLR-A350
    http://www.apple.com/downloads/macosx/apple/application_updates/digitalcameraraw compatibilityupdate20.html or through "Software Update"

    oops, now i've seen there has been another post with the same info.
    sorry about that.
    have a good Easter weekend everybody!

  • Camera Raw update 2.2 -- unsupported file formats

    As many user have posted here, after installing the latest Raw update from apple aperture and and all other core services became unable to read my Nikon D100 images. The file seemed fine since all other apps not based on core services worked fine. After reading some tips here I downgraded to the 2.1 raw software and everything was fine again. CLEARLY apple, in adding new camera support you introduced some sort of bug/problem. I know this was posted already but it did not seem to be generating much noise so I felt a need to keep the problem not 'under the rug'.
    Will

    Apple being aware of the problem is one thing, but customers are still being allowed to download and install this buggy version of Camera Raw update 2.2 without any warning of the consequences. The only place you can find any information about the problem is in this discussion and Apple have made no formal help documents available AFAIK. Pretty poor for a Pro App.
    It seems that not only are we beta testers for Apple, but also unpaid support staff.
    Message was edited by: D Anderson

  • E-520 images still not showing up after latest RAW update.

    Hi,
    I did the new RAW update today, but still just blank boxes when I try to import images from my Olympus E-520. Anyone else having this problem?
    I'm running 10.4.11

    Hi,
    I'd like to update this post. Seems the RAW files ARE importing to Aperture, however prior to import they just show up as blank boxes.
    In other words, when I select the import arrow and then select my CF card, then select the project I want to import to, the screen fills with blank preview boxes. I hit "Import All" anyway and then the actual images do import to the Aperture library.
    Also, I am still unable to see the the previews in the desktop finder window or in the Preview program.
    Again, is anyone else having this problem or know what may be causing it?
    Thanks very much
    Was very excited that Aperture was finally supporting the E520, now I'm a bit frustrated.
    Christian

Maybe you are looking for

  • How do I duplicate a pdf document in the cloud?

    How do I duplicate a pdf document in the cloud?

  • Total in ALV Grid

    I have data like currency and amounts and i want to display that amount as a total in alv display.. i used do_sum = x whle building fieldcat but itsdisplaying it currencywise like sub total...instead i want to total for all currencies and display it.

  • Just a Performance Question on BumbleBee

    I use Bumblebee and have ran a few SIMPLE tests. Every time I run them, using "primusrun" performs slower than "optirun". In my bumblebee.conf, the Bridge mode is set to "auto". Is that causing the issue? From what I've read, primus is supposed to be

  • Blocked Purchase Order

    Hi, We have taken a PO through the relase process and the PO Release strategy shows a green mark for all the release codes required. However, the release indicator is still showing an 'X' - "Blocked". Can someone please throw some light on why this w

  • JavaScript SaveAs: Acrobat Pro vs. Reader

    Hi Guys, My Privilaged / Protetected JavaScript SaveAs function works perfectly in AcrobatPro. The problem is that it will start to run in Reader, but the SaveAs won't execute. Ideas?