Aperture refuse to open the RAW files from my new Nikon D7100.

Aperture refuse to open the RAW files from my new Nikon D7100. What can I do? Thanks for help!

the raw support of new cameras will be made with a Digital Camera RAW Compatibility Update not with a aperture update. But when the new RAW- Update will arrive is not sure.
And that usually can only be installed with newer Aperture versions. You cannot use the latest raw support with Aperture 3.2.4, unless you are able to update to Aperture 3.4. And earlier raw support versions cannot be used with Aperture 2.
See the footnotes on the Raw Support page  http://www.apple.com/aperture/specs/raw.html. That is why asked for the Aperture version.
** Requires Aperture 3 or later.
*** Requires Aperture 3.4 or later.

Similar Messages

  • I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files?

    I can't open the RAW files from my new Nikon D4s camera in photoshop? How do I download the latest software for RAW files? Cheers!

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

  • I can't open the RAW files from my new Nikon D610 in PSE10. Any help for this?

    I recently purchased a Nikon D610.  I have PSE 10.  I can't open my RAW files now and I always shoot in RAW.  I've tried everything, but still can't open m,y files in the RAW format.  Any help??????

    Your most direct choices are:
    1)      Use the free Adobe DNG Converter 8.3 to create Adobe-DNG raws from your Nikon D610 NEF raws.  These DNGs will open in your older Elements Camera Raw plug-in.  Be sure to set the ACR compatibly options in the DNGC to support whatever version of ACR you’re using.
    2)      Buy PSE12, and first download the trial version to make sure your computer can run it properly.
    Adobe only adds new camera support to whatever the current versions of their software, and PSE12 was the current version of Elements when the D610 support was added.   PSE10 won’t be updated.
    Also be sure that you are NOT using the old Nikon Transfer or ViewNX with your new Nikon camera.  These older versions of Nikon products change something in the metadata of new camera NEFs that makes them unrecognizable to Adobe software.

  • I have updated my PSE9 and still can not open the RAW files from my new camera, I get an error?

    I bought a new camera (Canon T5i) and took photos in RAW, tried to open them in PSE9 and they wouldn't open. I got the following error...
    Canon RAW Codec found a new CR2 file that is not supported by the installed version.
    You can download the Canon RAW Codec update program from the link below.
    (Canon Server)
    I have been to the link & downloaded what update it had. I have also done the available updates on my PSE9 and I am still getting this error messge. When I called Canon regarding this they said I needed to contact Adobe.
    Can someone please tell me what I am doing wrong or not doing so I can open these files???

    The T5 is supported by Camera RAW 8.4 which needs PSE12. You can use the Canon software to convert RAW to TIF or the Adobe DNG Converter. The converter will convert the CR2 files to Adobes RAW DNG format that will open in PSE9's RAW processor. http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Why won't the raw files from my new Nikon D810 open in ACR?

    I just shot a newborn session on my brand new Nikon D810 and my RAW files will not open in ACR or CC or PSE. Everything is up to date. This is my first time using the new camera and the photos are for a paying client. Am I screwed until the new ACR updates are released? Or is there some magic fix until then? I'm panicking!

    Every new camera comes with its own specific Raw file format and Adobe must add support to Camera Raw for each individual camera released on the market. There's often a time lag between the camera shipping and Raw support being added to Camera Raw.
    Lots of D810s are now in circulation (dozens of D810 Raw support requests have popped up in these forums recently) and Raw support from Adobe is imminent but not yet final.
    D810 support has just been added to the yet-to-be-released Camera Raw 8.6.
    Adobe has made the Release Candidate version (a kind of post-beta, pre release) available for further testing prior to final release.
    Download Adobe Photoshop Camera Raw 8.6 Beta - Adobe Labs
    Install manually but use at your own risk until final release.

  • My PSE will not read the raw files on my new Nikon D7100? Help?

    I bought a new camera and shoot in the RAW format (nef) and I can not open the files to edit them. Please help?

    http://forums.adobe.com/thread/1229570

  • Cs5  RAW files from my new nikon D600

    is there a cs5 camera RAW update so that i can open my RAW files from my new nikon D600

    No. RAW support is version specific. Refer to this:
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    You might consider upgrading to CS6. In the menatime you can always use the free DNG converter.
    Mylenium

  • I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files.  This works (most times) for my Lumix FZ28.
    Adobe DNG Converter 8.3  http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

  • Aperture3 won't open raw files from my new nikon D5100

    Aperture3 won't open raw files from my new nikon D5100. It worked fine with my D40, but when I got the D5100 it wouldn't open the raw files from it. Is there an update for it?

    https://discussions.apple.com/message/15087160#15087160

  • Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

    Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

    Hi,
    CS6
    Van: R_Kelly [email protected]
    Verzonden: maandag 16 september 2013 18:42
    Aan: Hans van Sloten
    Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
    created by R_Kelly <http://forums.adobe.com/people/R_Kelly>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

  • Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

    Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

    Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
    Nikon does it, Canon does it, and also several other camera makers.
    There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
    Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
    Camera Raw plug-in | Supported cameras
    Versions of ACR are specific to each version of Photoshop.
    Older versions of PS cannot use the latest version of ACR.
    You need to download the latest version of Adobe DNG Converter.
    This will convert your newer 7100 files to DNGs that can then be opened in older versions like CS3.
    Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

  • Just bought Nikon D600, can't open the raw file from my Photoshop element 9, please adivise.  Thanks

    Can't open the raw file in my Photoshop Element 9 from my new Nikon D600, please help. many thanks
    Brian

    Hi,
    The D600 requires camera raw version 7.3 or later - that is not compatible with Photoshop Elements 9.
    You need to either
    1) upgrade to Photoshop Elements 11 or 12
    or
    2) you can download the free Adobe DNG converter to convert you NEF files to DNG files and then PSE 9 can read the DNG files
    The latest version of the DNG converter that you can use will depend on your operating system.
    For XP or Vista :
    DNG Converter 8.3
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
    For Windows 7 or 8
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
    For Mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
    Brian

  • Photoshop CC doesn't open my camera raw files from my new Nikon D800 (ACR v 8.3.0.141)

    However, it opens camera raw files from my D300 without problems.
    Same for Bridge: NEF files are displayed as generic thumbs.
    Can anyone help me?

    I don't use the Nikon software, but I believe that the latest version of Nikon Transfer works fine. I think it comes with ViewNX2, which is a free download, AFAIK.
    I personally download my photos using a card reader and Adobe Bridge (which comes with Photoshop, and contains Adobe Photodownloader).  Not sure, but I think it's included with Lightroom & Elements too (but I don't use those either).  Using Photodownloader has the added advantage of being able to add metadata at the same time.

  • When I open a RAW file from my new Sony camera, how can I get it to open in Photoshop instead of Perfect Effects 8?

    When I open a RAW file from my Nikon's SD card it automatically goes to PS. I have a new Sony camera; when I open RAW photos from it, it goes to Perfect Effects 8. How can I change it so it goes to Photoshop instead of Perfect Effects 8?

    When I have an NEF file on my desktop and click on OPEN WITH, it shows the programs, including Photoshop, that will open it. But, when I click on OPEN WITH for an ARW image, it doesn't show Photoshop. However, your suggestion about dragging the images from the SD card on the desktop into the Photoshop icon provides me with a solution. This is much easier and quicker than the way I was doing it. Thank you very much for your help!!!

  • Can Photoshop Elements 5 open the Raw files from my camera?

    I have just began using raw instead of jpg, but cant open my images in Elements 5, even though manual says I can open the file stored on my c: drive thru editor, open. It says file is in incorrect format. Can someone please tell me how to convert the raw file in elements?
    Tks!
    Message title was edited by: Brett N

    You may need to download and install a new version of Adobe Camera Raw:
    http://www.adobe.com/go/kb407110

Maybe you are looking for

  • Error Message about Bonjour on Windows 7

    Hi!  I am trying to reinstall Itunes, however, I get an error message saying the installer has insuffient privileges to access this directory C:\Program Files (x86)\Bonjour\Bonjour/Resources\es.Iproj.  The installation cannot continue.  Log on as adm

  • SSAS 2008 Linking two cubes on the foreign key between two fact tables

    Hi, all --  I have two cubes: Cube 1 has Fact1 (F1, "Events") and 3 dimensions (D1, D2, D3) Cube 2 has Fact2 (F2, "Sales") and 3 dimensions (D4, D1, D6) As you can see, two cubes reuse D1 as their common dimension.  In addition, F2 foreign keys into

  • Java Update does not install latest build

    Kind of an odd bug I suppose: Java Update only installs up to build 6, even though build 7 is listed on the site. It's possible that the latest build hasn't been placed on the update servers yet, though personally I think there's a problem with Java

  • How can I get rid of/disable the aniweather plugin?

    Computer is an Acer Aspire 53xx series laptop, loaded with Vista home. The aniweather plugin is irrelevent and wasting memory space, because the nearest location to myself is Paris, France, and I am in Manchester, England. I cannot find this programm

  • ITunes not working, reinstalling doesn't help

    iTunes has stopped working on my computer. When I run it, it starts up normally. As soon as I select any option, it hangs showing the "moving circle" cursor. I have completely uninstalled iTunes (using the instructions on the website including iTunes