Aperture slow + issue with colors

I installed Lion + aperture 3.1.3 after which aperture become too slow to work with and the colors of my photos look different, as if they lost contrast!
Does anyone noticed this behavior?
I am using a 2Ghz Core 2 Due processor with 4Gb of memory.

Thanks rwboyer,
It doesn't happen only to the first access, but quite always.
And regarding the "offline" term, you are right: I meant to say "stored into an external Hd connected to my MBP".
I would add other details: as I stored my referenced files outside my MBP Hd, I work with preview.
All these preview sometimes are displayed in low-res despite I let Aperture creating a preview of whole library. Sometimes these preview are displayed suddenly, sometimes it takes several seconds and sometimes it doesn't happen at all.
This makes me crazy!
I'm thinking to relocate all the master into the MBP Hd.
And now the questione is: import all the masters in the Aperture library or let the masters like referenced master inside a folder on my MBP Hd?
Which is the best way to save room on the Hd?
Thanks once again for the support
Simone
Message was edited by: Simone76

Similar Messages

Issue with Color Fills and Multiply?

Hi,
I use Photoshop 7.0, and yesterday I started having an issue with Color Fills.
(You may actually have to Say I have a black-and white lineart on the background layer, such as
this. I double-click on the background layer to make it edit-able.
I click on the Color Fill button, choose solid color, then pick any color (say we use bright red). I go back to the lineart, move the Color Fill layer to underneath the lineart layer, and fill the Color Fill with black. Normally, it would just create white, however for me it has pink/light red. The same thing also happens for patterns and gradients; it leaves a very faded version of the color on the picture.
I didn't change any options or settings, however my little brother was playing around with Photoshop, and he may have changed something. Can anyone tell me how to get it so that there is no pink or faded color there?
Thanks in advance.

One quick way to fix this is to hold down crtl-alt-shift while Photoshop
starts up, and reset your prefs to their factory defaults. This will not
lose any of your work.
The other way is to look through your various settings. Top of the list is
whether your new files are being created in RGB or CMYK mode. It should be
RGB.

Issue with color profile image processing

Their seems to an issue with the iPhone displaying an image which has a Color profile of: Generic HDR Profile. The image appears very dark and nearly unviewable. This has been frustrating to trouble shoot becasue the image will display correctly on the computer, but when it is viewed on the iPhone it looks completely different. When images have other color profiles such as sRGB the images will look the same on both platforms. When an image has a Generic HDR color profile it will not display correctly on the iPhone.
Anyone else come across this problem?

When PSE gets weird, the first thing to do is to reset the preferences. Go to the editor preferences>general, click this button and restart the editor:

Printing issues with color mgmt on a HP 7180 photosmart printer - Can you help?

I've been have an ongoing issue with my Adobe Elements 6.0 and printing my pictures off a HP7180. The colors don't match what I see on the monitor as well what's on my camera. I can send the pictures to KodakEasyshare online and the pictures come back with the same colors as to what I see within my application and monitor. I've run test pages off my printer and everything is good. Help me, PLEASE.

I've tried printing from both the catalog and the editor screen and I've fooled around with the color mgmt. The printing is still off. The colors are vibrant from what I can see and when it prints it's not as sharp and the colors tend to be dull or maybe leaning towards more green/blue sometimes even more reddish - orange. I've taken the liberty and reseted the printer to factory defaults on the hardware and on the pc...It's till giving me this problem. What's amazing is I can print from Kodakgallery software, photoalbum 3.2 from adobe and the colors are some what true to color. I can't get it to print right with elements.

Time Warner Cable wideband broadband slowness issues with Motorola sbg6580 router

I recently purchased Time Warner Wideband broadband cable for Internet service. 50 Megabit down and 5 Megabit up. When I run the speedtests, I can see the full speed measure, but I stil see issues with browsing and getting connected to VPN.
I had Time Warner Cable come out and replace the router. I still had the same issues after the replacement of the SBG6580 router. There are no updates to the firmware on this router.
I consistently see slow web page loads and problems while on VPN. I found posts on the web saying that this router's firewall was not compatible with Apple's computer products. Even with this firewall turned off inside the router, I still had the same slowness and misc issues.
I finally just changed the router into a gateway using the Rg Passthrough (which automatically turned off the NATP). I added the Time Capsule's MAC ID to the bypass section on the Router. I set up my Time Capsule to act as the main router with a cable running from the Motorola router to the Time Capsule WAN port.
The web pages and VPN are extremely faster. So the root cause is with the Motorola SBG6580 router obviously. I always got the full speed on the Speedtest.net web site, but now everything works fine with this change.

Dude. You are awesome! I am SOOOOOOOOOOOOOO glad you posted this solution. The fact that you took the time to post even AFTER you figured out a solution shows how thoughtful you are as an individual.
Its amazing to me that someone would comment adversely becuase they feel its in the wrong forum. If it affected their life as it does mine then they would get it. Amazing how people cant see past themselves. Who cares what forum its in if its informative? Worse case just move it to a different forum. We need more people like you and less like them in the world.
Thanks Im gonna try the solution right now!

Slowness Issues with Windows Authentication in SharePoint Foundation 2010 sites

All,
We are having a strange issue with SharePoint Foundation 2010 sites where sites are very slowly loading when accessed via windows based authentication where as the extended sites in forms authentication are loading normally.
There were no error logs or even SharePoint logs also except the images load time is showing with different load times.
Attached are the patches that were updated to the server that may be issue but not sure. Can some one please share your thoughts.
SQL connectivity b/w the server is good.there are no n/w issues except that the users are using the sites with a different domain other than the domain in which the servers were hosted.
There is a trust b/w the two domains.This was never changed and there were no issues in the last 2 years.
Thanks keshav,Share point Developer

we do have trusted domains
Inder : It would be better if you run that command again now.
Inder: How many AD server do you have
Inder: Do you notice the login request go to nearest AD server.
and https sites. Please share your thoughts.
Inder: All the certificate have intermedite certificates. You need to logon to each SP server, and install
these certificates on trusted root authority
If this helped you resolve your issue, please mark it Answered

Issues with color panel and other windows on right side of flash

Ok the issue I'm having with flash is that the windows on the right side of my flash window do not snap up when I collapse a window. I am attaching a screen shot to better explain this issue.
As you can see I have the color panel collapsed up, when I expand this panel and it goes down everything shifts down. however when I collapse it back up a huge gap is left behind in CS5.5 as is displayed in screen shot number 2. In CS4 I never had this problem. I could expand and collapse panels as I saw fit with no problems what so ever. Everytime now that I expand a panel and collapse it, the library or other panels do not move up with the collapsing. This causes a workspace issue. and forces me to drag up the library via the black line that is just above it but below the align panel so that I have better access to my library or properties panel for when I'm working. I find this highly annoying and would like it if there could be a fix produced to make it so this collapsing issue can be fixed and I don't have to waste time dragging up the library/properties panel everytime I need to access stuff in my library when I have a huge list of graphics I'm going through.
Thanks
h_cline2

I already tried that, first thing I thought of before coming to the forums for a solution.
Thanks anyways.
Any other ideas?

Getting slowness issue with Oracle DB (10g) - specifically for one table

We have a Oracle Database. When we are trying to access it through our Java application, it is working fine except for 2 menu option in the application.
These 2 menu option are trying to fetch from the same table. It is taking 30-40 min to fetch some 500 records. It was not the case few days ago.
I have checked at application end however didn't find any issues.
Could you please suggest, what could be the possible reason and solution for this.

There are many possible reasons and solutions for this. That is why you need to look at what the instrumentation is telling you is wrong.
First: determine if there is something grotesquely wrong. Oracle has an alert log, see if there are any complaints in there. There are a number of ways of observing the database, dbconsole has a nice screen with performance, though you might need some special licensing. There are also scripts you can run and third party tools. You may also want to use statspack or AWR to tell you generally what is going on, sometimes the top sql just makes it obvious, but you have to know your own system to make that kind of judgment.
Next, see if there is something obviously wrong, check for missing or otherwise unavailable indices. Tell us what your exact version is (10g is not a version: 10.2.0.4 is a version), as well as platform and your statistics gathering strategy.
If it still isn't obvious, follow the [url https://forums.oracle.com/forums/thread.jspa?threadID=863295]Thread: HOW TO: Post a SQL statement tuning request thread. You should post a proper explain plan for times when it works good and times when it works bad. Most performance problems are bad sql, but you can have odd effects from things like bind peeking.
And if all else fails, blame java.

Issue with Color Management and Print Module

The is a repost per request from a comment on Julieanne Kost's blog...
Having sticky output settings can be useful but now that LR has a color managed workflow, it introduces some problems. For example, if a Proof Copy is created and edited to a particular profile, then that copy is taken into the Print Module, if the output profile that has “stuck” from the previous job does not match you have a problem. It would be nice if the behavior for proof copies would be to automatically match the editing profile or at least warn of a mismatch. And while it is nice to be able to create a Saved Print with all the output parameters, it would be helpful to be able to create saved sets of “Print Job” settings assuming that they will be consistent for a particular printer/ink/paper combination (and whatever “Print Adjustment” you have found to your liking) then easily applied to any image being prepared for output. Perhaps a “save setting” selection under the “Print to:” menu.

So what you propose is the templates are proof copy sensitive and if they are setup for profile A but the proof copy describes profile B, then everything but the template defined profile is honored? I could get behind that idea (but what if one selects multiple VC’s with differing profiles and goes into Print?).
That's pretty much it. It does get complicated quickly as you look at multiple VCs or (and I think we need to start making the distinction between proof copies and ordinary virtual copies) if you bring a mixture of PCs and VCs into the print module. I would suggest that the default behavior be to set output profile of the PC as defined in the PC and retain the "sticky" behavior for ordinary VCs.
I also think that having the ability to save a "Print Copy" may change what we need out of the templates and perhaps their overall function should be re-evaluated.
The VC name should show you the profile used for soft proofing if you have the overlay on. That helps too. My concern are those who work with these VC’s and the text overlay is off.
I'm not getting that behavior. The only place the copy name shows up in the print module is in the filmstrip header. Maybe I have a preference set wrong somewhere... Still, I'd rather the software take care of making the match rather than having to double check to make sure I haven't inadvertently changed the profile somehow (i.e. clicking on a template just to see how it would look on another size paper).

Is anyone having issues with colored lines streaking through image of camera on ipad air?E

Today when using the camera on ipad air the screen became filled with red green and blue streaking lines. When a photo and video was taken the lines were part of the recorded images. The problem is not evident if the cameras are switched and the camera on top is used. The ipad is only a week old having been given for Christmas. I have tried turning the device off as well as resetting it but no luck.

Hi Eshylie,
Thanks for visiting Apple Support Communities.
If you see colored lines on pictures taken with the rear camera, and resetting the device didn't resolve it, I recommend backing up and restoring the iPad Air next:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Best,
Jeremy

Issues with color between Photoshop and iPhoto

Can anyone tell me why when creating a "layout" page in Photoshop I have correct color, but if I export that as a .jpg and then add it to iPhoto to print it out it looks are harsh and high contrast?
see example:
www.ouroutdoorfamily.com/Photos/Picture1.png
www.ouroutdoorfamily.com/Photos/Picture2.png
Message was edited by: Our Outdoor Family

Welcome to the Apple Discussions.
The usual reason for this is that you’re using a different colour space in Photoshop. Try using sRGB in both, see if it helps.
Regards
TD

C5.5 Issue with color/colour in matching question drop down list

Hi is there a way to change the colour of the letters that appear in the drop down lists for a matching question in 5.5?
I'm using white text on a grey background for my quiz slides, which is nice and easy to read, but then in the preview the letters in the drop down appear as white text on a white background. I can't see a way to change the font in the drop down back to black (as it is on my editing view), without also changing the colour of the answer text.
Is there a way to change this?
I've just tried covering the lists over with a chunk of background image - so that the user doesn't even know they're there, but the quiz slide has ordered the image behind the lists.
Failing there being a way to change the colour, is there a way to have a matching slide without a drop down list at all?
Thanks for reading
Lynn

Hi Shekhar
Thanks for the extra info - I'd tried changing the properties and using the object style manager before, but hadn't considered using them together.
This time, I followed your advice and:
I set the colour for 'Matching entries' to black in the object style manager
Then went into each column 1 entry and set the text to white
The result was white text in the column, with black in the list. Much better than before!
However, when I changed the text in column 2 to white, the list entries became white as well.
After a lot of experimentation, I've discovered that if you just select the text object and change the colour, you change all the text including the lettering and numbering of the answer - this changes the list colour.
If you change the text in the answer by highlighting it, this doesn't affect the lettering/numbering, however it still changes the drop down
To leave the drop down the right colour you need to change the answer colour by highlighting first, but, and the order is vital, you need to insert a space between the letter/number and the answer text first.
So, the end result I have is that the column 1 text is the right colour, the column 2 text is the right colour and the text in the drop down is the right colour. Unfortunately the lettering for the column 2 answers has to stay the same as the letters in the drop down list, so they don't show up brilliantly (black on a dark grey background), but it's a massive improvement on the invisible list I had before!
Thanks again!
Lynn

Color management issues with Flash CS3, please help?

Hello everyone.
I am having issues with color from a Jpeg image produced in Photoshop CS4
after importing onto the stage in Flash CS3. The color in Flash changes the image to a lighter less saturated state. Yuk.
Here is a link to a screen capture to show you what's happening (for a bigger view):
http://www.rudytorres.com/color/weirdcolor.png
As you can see the front image is the Photoshop image showing the sRGB color profile embedded but Flash (behind) changes that color.
This client is quite picky and she will notice this difference.
If any one can help, please.
- Rudy
P.S. It's a button somewhere, Right?

Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou

OSX Mavricks - Any issues with Adobe CS?

Just wondering if anybody has been using Mavricks at all and if there are any issues with Adobe CS at all.

Okay, well I can give a good report on this since I installed Mavericks today and am working with InDesign CC...which, as we all know, already has slowness issues. Well, last I tried to do a simple upgrade to Mavericks and was not able to do it! Seems like the Apple Gurus formatted my hard drive in a way they were *not* supposed to when I had them replace the hard drive at the end of last year, after a hard drive recall for the iMac 27"'s...grrr...THANKS Apple Gurus! So I ended up having to wipe the drive before being able to install Mavericks....then imported all my data over and it worked GREAT! (First time I have done this since I used to always prefer a clean insteall and installing everything from scratch but just did NOT have the energy or will to do it this time around! I was IMPRESSED and all worked well!
And now on to the nitty gitty of my post....long story short, everything worked well EXCEPT for InDesign CC which was slooower than EVER. Before the upgrade, I had gotten it to a point where it was ACCEPTABLE to work in speedwise. But now every little keystroke had a HUGE lag...even selecting a tool from the toolbar would take forever. And typing or selecting text....forget it I wanted to put my head in my arms and cry my heart out. I am in the middle of some huge projects and need to get them done.
And yes, I KNOW...I KNOW...I should NOT be doing something so risky as updating my OS when I have so much work to do. BUT I DID take all the precautions and make all necessary backups prior to doing so!! It is just in my BONES and probably in my DNA that sometimes I just cannot wait to do things like these major OS upgrades...otherwise a little inner voice will keep nagging at me...and I won't be able to concentrate on anything else until I get it done...so I just HAD to go ahead and get it done! I REAAAAALLY wanted Mavericks installed!
And now for the GOOD NEWS! After trying everything else I could think of, I reset the ID CC prefs (which should have been the FIRST thing I did!!) by htting CMD-OPTION-CTRL-SHIFT upon starting ID CC and.....suddenly...lo and behold....WOW....suddenly everything had dramatically speeded up in InDesign! EVERYTHING! Text selection, typing, selecting tools and everything else. I have no doubt that most people who are having slowness issues with ID CC have already tried this and are still experiencing slowness issues....but this worked for me today at any rate. I will keep you posted if I experience any more issues after this.
All I know is I am a happy camper and ID CC seems to now be working faster than it has before.
So...that's my news:)

Printing issues with Aperture 3 - color management

I just made three prints of the same images, two with Aperture 3 that turned out very dark and off color, almost as it they were printed without color management or double profiles. I then printed the third by exporting the image to CS4 and printing with the same settings (rendering intend, printer settings and custom printer profile) and that print looks fine. Has anyone else run into similar problems with A#? I did not have this issue with Aperture 2.
Thanks,
Message was edited by: pcalvin

I print on an Epson 2880 with Lyson inks and custom profiles. In Aperture 2 it worked perfectly, with exactly the same settings as for printing Photoshop - using the laboratory prescribed settings:perceptual and no black point compensation in Photoshop, and Adobe RGB Gamma 2.2 in the Print settings.
Using the same profile and settings with Aperture 3, the colours are way, way off - exactly as described.
I then tried with Aperture 3 turning off the Adobe RGB setting, so there was no colour space adjustment in the Print setting. This gave a slightly better result, but rather dead and slightly blue.
I ran some tests with the GretagMacbeth colour chart used in preparing the profiles, which confirmed the above but also shows a lack of sharpness when printing from Aperture 3, and a blue border on three sides of the image - even though the border was set to 0.00. I have checked the printer head adjustments and run the test chart through Photoshop again to verify these are Aperture 3 artefacts.
Unless this is resolved, it renders Aperture completely useless! (I have tried reinstalling printer drivers, to no effect).

Aperture slow + issue with colors

Similar Messages

Maybe you are looking for