Aperture stopped working

I was importing images from my camera and the battery went dead on the camera and now Aperture will not stop processing and i have to force quit to get out of it. Is there a fix -it guide out there?

Hello Roy,
if you force quit, your Aperture library might be left in an inconsistent state. If Aperture will not start without problems after force quitting, try the trouble shooting basics: Repair permissions, repair library, delete preferences.
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Report back, if still problems persists.
You may find some recovered images in an recovered album, since your import was not completed. Probably it would be better to reimport those pictures.
Regards
Leonie

Similar Messages

  • I have a corrupt Photo file, that makes Aperture stop working properly.

    I recently imported some of my old photos from a CD to the Aperture Library. Every time I open that project or try to work with any of those photos Aperture will stop working. (in a very aggressive way)
    The viewer wont update.!
    It wont make any change or save anything.!
    I have to quit and restart Aperture to have it working again, I don't know what is wrong.
    Any Idea?
    Maybe new aperture .5 will fix this??
    TKS
    G5 quad   Mac OS X (10.4.7)   big ram

    Another option would be to quit Aperture, remove the project from the Library using the Finder, reopen Aperture (the troublesome project will now be greyed out), throw the troublesome project out, and finally reimport the images back into Aperture. The only problem is you now have to re-do any adjustments etc. for that project. If he project has other images you do not want to re-do you could try just removing the problem import group, go back into aperture and then throw those images out, quit (you may have to force quit) Aperture and then restart Aperture. I did the above on a test Aperture library, but as usual you have to be carefull. Do not do any of this without first duplicating the troublesome library.

  • Aperture stopped working - help

    hi
    my brother is an artist, and photgrapher who uses aperture
    he tells me that aperture offered an update which he took,
    then it asked him for his serial number which he gave, it was rejected
    saying it could not be used. he is now locked out and can't get access
    to all his work including thousands of photo's. would anyone be able to
    offer help on line, we're not near a store and intend calling apple but he
    does'nt have applecare.
    any help or guidance would be appreciated
    kind regards

    Does he have another volume he can boot off and
    install from his original Aperture disc onto it? If
    he does and can then the next thing would be to
    uninstall Aperture from his 'real' volume and
    reinstall it from disc. Of course he should have his
    Aperture library backed up just in case something bad
    happens.
    brian
    thank you for the reply
    he only has one mac with the spec to run aperture, he upgraded
    a powerbook specifically to run aperture
    he was'nt backed up, and cant get in to aperture at all?
    regards

  • Aperture stopped working from MobileMe connection?

    Hi,
    I had not been using my Aperture 3 for couple months and today when I launched it, it started but then it asked me to move albums from MobileMe as shown in below screen message:
    MobileMe has been discontinued
    Click OK to move albums you have published to
    MobileMe Gallery into the Albums section of your library to preserve them.
    Buttons are:  "Learn More", "Switch to Library", "OK"
    It locked up my program (I think it was trying to connect to MobileMe which has been terminated already).  But I cannot press any other button.  I had to force quit Aperture and restart it.  After restart I had the same screen message and could not move forward.  I no longer had any albums in the MobileMe as I had already migrated long time ago.
    Can anyone help on how to get out of this issue when I launched Aperture 3?   I have Aperture 3.3.1.  Thanks.

    Click on the Learn More link, and you should be able to then go into Aperture Preferences/Web and remove the MobileMe related account info.  Also in System Preferences sign out of MobileMe.
    Ernie

  • Some Aperture Brushes stop working??

    I have recently upgraded my iMac (i5 with 12GB RAM) from 10.8.5 to 10.9.3, upgraded Aperture to 3.5.1. Pretty much my first editing session, and I discover that about half the Aperture brushes have stopped working. This happens on previously unedited images, both JPG and RAW. All referenced images.
    These brushes seem to work fine:
    Retouch
    Skin Smoothing
    Burn
    Tint
    Definition
    Vibrancy
    Halo Reduction
    Highlights and Shadows
    Sharpen
    These brushes don't work - the brush menu comes up, I can change the setting, but the brush does not show, and I can't brush anything:
    Dodge
    Polarise
    Intensify Contrast
    Contrast
    Saturation
    Blur
    Sharpen
    Noise reduction
    Curves
    Enhance
    Levels
    I tried changing various brush settings, doesn't seem to help. I have submitted an a bug report to Apple.
    Any ideas from the forum, has anyone run into this?

    A reboot seems to have fixed it.

  • TS5192 After updating with 4.09 my photos which I store on an external hard drive will load into Aperture for 15 or so photos and then I just get the same photo repeating despite clicking on a different one in the group.  I have to stop working and come b

    After installing the 4.09 fix to process RAW from Sony RX100 (after updating to 3.5.1), photos do not continue to load into Aperture from the external hard drive where they are referenced.  The same photo is stuck in the adjustments frame to be worked on and the photos will not advance, no matter what I try, so i can work on the next one.  I can only work on a few at a time and then i have to go away and come back another day.  4.09 does fix the barrel distortion but it has completely gummed up the uploading of the referenced photos.  It's taking me days and weeks to process a couple of hundred photos.

    The Macbook Air is a low end Macintosh for graphics apps and you are asking it to perform a heavy pro workflow using a pro application. The integrated GPU of MBAs is a serious limiter to heavy graphics. Personally I would expect flaky performance with certain operations. In general I recommend that Aperture users choose boxes with independent GPUs and capable of taking 16 GB RAM if necessary.
    It will be important to carefully optimize workflow. How much RAM is in the MBA? The most Apple specs is 8 GB but you can check OWC to see if you can go to 16 GB. My Aperture/Photoshop workflow paged out at 8 GB RAM before I upgraded to 16 GB RAM.
    You should evaluate whether or not you have adequate RAM:
    Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
    Ignore the pie charts and other info in Activity Monitor because they can be misleading regarding RAM usage. For RAM analysis, manually count page outs before and after a work session.
    HTH
    -Allen

  • Mail.app Stopped Working with Google Apps Account

    I have accessed my Google Apps e-mail account via Mail.app for many months with no problems. Then all of a sudden yesterday it has stopped working. I can't download new messages no matter what I do, and it does not give me any errors such as wrong username/password. I have tried sending a few test e-mails out and they get sent even though Mail.app shows the message as still being sent endlessly (the blue progress bar goes to about 50% and then just sits there, however the recipient receives the e-mail). Has anyone experienced this problem? It may be a complete coincidence, but I also just upgraded my version of Aperture 2 to Aperture 3 and it has been having all sorts of problems (which others are experiencing as well). Any help is greatly appreciated.

    After some searching I have found a solution. I had to delete the contents of the following folder:
    ~/Library/Mail/myemailaccount/.OfflineCache/
    Note: replace "myemailaccount" with the appropriate folder on your computer that represents your e-mail account. Once I deleted the contents of this folder (there were 2 files), and restarted Mail, there were no problems.
    Hope this helps a few people in the future!

  • Sound stopped working

    Hi.
    It used to work.
    I have problem with sound. Yesterday It does work, but today it stopped working. I'm not sure if it is because of some updates, I haven't noticed anything connected to sound. The only difference is that I uninstalled mplayer2. Then it stopped working - but I'm not sure if it was because of this.
    I tried:
    reinstall alsa, alsa-plugins, alsa-utils, vlc, mplayer2
    install pulseaudio, oss (without configuration)
    reboot
    unmute all chanels in alsamixer
    connecting headphones
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    lspci|grep -i audio
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
    lsmod|grep '^snd'|column -t
    snd_hda_codec_hdmi 27857 1
    snd_hda_codec_realtek 62279 1
    snd_hda_intel 33946 0
    snd_hda_codec 101474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6364 1 snd_hda_codec
    snd_pcm 76956 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18687 1 snd_pcm
    snd 58893 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    pacman -Q |egrep -wi --color 'vlc|audio|alsa|mplayer2|oss|pulse|sound'
    alsa-lib 1.0.27-1
    alsa-plug]alsa-lib 1.0.27-1
    alsa-plugins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1ins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask F80000000 write-back
    [ 0.000000] 6 base 180000000 mask FE0000000 write-back
    [ 0.000000] 7 base 19FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
    [ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] [mem 0x100000000-0x19fdfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xd9c9b000-0xd9c9efff]
    [ 0.000000] RAMDISK: [mem 0x37a50000-0x37d1ffff]
    [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000daf47000 00040
    [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
    [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000dafe7000 0022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff]
    [ 0.000000] NODE_DATA [mem 0x19fdfb000-0x19fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x19fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
    [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] On node 0 totalpages: 1545773
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 141 pages reserved
    [ 0.000000] DMA zone: 3776 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13859 pages used for memmap
    [ 0.000000] DMA32 zone: 873085 pages, LIFO batch:31
    [ 0.000000] Normal zone: 10232 pages used for memmap
    [ 0.000000] Normal zone: 644616 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
    [ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
    [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s85184 r8192 d21312 u262144
    [ 0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1521477
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 6002944k/6813696k available (4908k kernel code, 630604k absent, 180148k reserved, 4024k data, 820k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.383 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.79 BogoMIPS (lpj=5321276)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000038] Security Framework initialized
    [ 0.000045] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002565] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003415] Mount-cache hash table entries: 256
    [ 0.003607] Initializing cgroup subsys cpuacct
    [ 0.003609] Initializing cgroup subsys memory
    [ 0.003616] Initializing cgroup subsys devices
    [ 0.003618] Initializing cgroup subsys freezer
    [ 0.003620] Initializing cgroup subsys net_cls
    [ 0.003622] Initializing cgroup subsys blkio
    [ 0.003647] Disabled fast string operations
    [ 0.003649] CPU: Physical Processor ID: 0
    [ 0.003650] CPU: Processor Core ID: 0
    [ 0.003655] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003658] mce: CPU supports 7 MCE banks
    [ 0.003671] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003677] process: using mwait in idle threads
    [ 0.003681] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.003835] Freeing SMP alternatives: 20k freed
    [ 0.004849] ACPI: Core revision 20121018
    [ 0.011331] ftrace: allocating 19310 entries in 76 pages
    [ 0.022372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055356] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.055365] TSC deadline timer enabled
    [ 0.055369] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.055376] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.055378] ... version: 3
    [ 0.055379] ... bit width: 48
    [ 0.055380] ... generic registers: 4
    [ 0.055381] ... value mask: 0000ffffffffffff
    [ 0.055382] ... max period: 000000007fffffff
    [ 0.055383] ... fixed-purpose events: 3
    [ 0.055384] ... event mask: 000000070000000f
    [ 0.093170] Disabled fast string operations
    [ 0.095374] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.113177] Disabled fast string operations
    [ 0.126599] Disabled fast string operations
    [ 0.082145] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.128712] Brought up 4 CPUs
    [ 0.128716] smpboot: Total of 4 processors activated (12776.19 BogoMIPS)
    [ 0.132574] devtmpfs: initialized
    [ 0.133773] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
    [ 0.134524] RTC time: 14:38:00, date: 04/23/13
    [ 0.134565] NET: Registered protocol family 16
    [ 0.134701] ACPI: bus type pci registered
    [ 0.134776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.134779] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.142122] PCI: Using configuration type 1 for base access
    [ 0.142308] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.142309] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.142310] mtrr: corrected configuration.
    [ 0.142733] bio: create slab <bio-0> at 0
    [ 0.142794] ACPI: Added _OSI(Module Device)
    [ 0.142795] ACPI: Added _OSI(Processor Device)
    [ 0.142797] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.142798] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.144238] ACPI: EC: Look up EC in DSDT
    [ 0.145725] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.148149] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.149385] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.149747] ACPI: Dynamic OEM Table Load:
    [ 0.149750] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.150021] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150411] ACPI: Dynamic OEM Table Load:
    [ 0.150414] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150533] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.150890] ACPI: Dynamic OEM Table Load:
    [ 0.150892] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.152416] ACPI: Interpreter enabled
    [ 0.152421] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.152442] ACPI: Using IOAPIC for interrupt routing
    [ 0.159354] ACPI: Power Resource [FN00] (off)
    [ 0.159432] ACPI: Power Resource [FN01] (off)
    [ 0.159506] ACPI: Power Resource [FN02] (off)
    [ 0.159581] ACPI: Power Resource [FN03] (off)
    [ 0.159654] ACPI: Power Resource [FN04] (off)
    [ 0.159950] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.160074] ACPI: No dock devices found.
    [ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.160290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.160292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.160531] \_SB_.PCI0:_OSC invalid UUID
    [ 0.160532] _OSC request data:1 8 1f
    [ 0.160943] PCI host bridge to bus 0000:00
    [ 0.160946] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.160949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.160951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.160952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.160954] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.160956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.160965] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.161009] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.161021] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.161028] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.161033] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.161093] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.161118] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
    [ 0.161201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.161240] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.161264] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
    [ 0.161361] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.161391] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.161408] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
    [ 0.161483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.161509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.161596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.161628] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.161714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.161746] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
    [ 0.161876] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.161921] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.161945] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
    [ 0.162042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.162072] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.162207] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.162228] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.162236] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.162245] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.162254] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.162263] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.162272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
    [ 0.162324] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.162346] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.162363] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
    [ 0.162392] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.162635] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
    [ 0.162815] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
    [ 0.163511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.169202] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.169209] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.169339] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.169408] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.169530] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
    [ 0.169605] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
    [ 0.169935] pci 0000:02:00.0: supports D1 D2
    [ 0.169937] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.175788] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.175797] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.175816] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.175957] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
    [ 0.175995] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
    [ 0.176190] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.182448] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.182462] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.182529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.182568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.182598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.182726] \_SB_.PCI0:_OSC invalid UUID
    [ 0.182727] _OSC request data:1 1f 1f
    [ 0.182731] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.182732] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.183395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183442] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183530] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183616] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183709] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.183801] vgaarb: loaded
    [ 0.183802] vgaarb: bridge control possible 0000:00:02.0
    [ 0.183834] PCI: Using ACPI for IRQ routing
    [ 0.185498] PCI: pci_cache_line_size set to 64 bytes
    [ 0.185611] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.185613] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
    [ 0.185615] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
    [ 0.185616] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
    [ 0.185709] NetLabel: Initializing
    [ 0.185711] NetLabel: domain hash size = 128
    [ 0.185712] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.185729] NetLabel: unlabeled traffic allowed by default
    [ 0.185745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.187760] Switching to clocksource hpet
    [ 0.192350] pnp: PnP ACPI init
    [ 0.192366] ACPI: bus type pnp registered
    [ 0.192633] pnp 00:00: [dma 4]
    [ 0.192731] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.192753] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.192844] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.192878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.192924] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.192927] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.192929] system 00:04: [io 0x5000-0x5003] has been reserved
    [ 0.192931] system 00:04: [io 0xffff] has been reserved
    [ 0.192932] system 00:04: [io 0x0400-0x0453] has been reserved
    [ 0.192938] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.192940] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.192942] system 00:04: [io 0x0a00-0x0a0f] has been reserved
    [ 0.192944] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.192946] system 00:04: [io 0x5000-0x500f] could not be reserved
    [ 0.192949] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.192975] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.193023] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.193027] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.193068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.193112] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 0.193267] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.193270] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.193272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.193274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.193276] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.193278] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.193280] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.193282] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.193284] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.193286] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.193288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.193629] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20121018/utresrc-650)
    [ 0.193634] pnp 00:0a: can't evaluate _CRS: 12311
    [ 0.193738] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.193762] pnp: PnP ACPI: found 11 devices
    [ 0.193764] ACPI: ACPI bus type pnp unregistered
    [ 0.200460] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.200467] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.200477] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.200481] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.200489] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200497] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.200503] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.200541] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.200543] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.200545] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.200546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.200548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.200550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
    [ 0.200552] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.200554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200556] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.200587] NET: Registered protocol family 2
    [ 0.200783] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201188] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.201218] TCP: reno registered
    [ 0.201232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201357] NET: Registered protocol family 1
    [ 0.201372] pci 0000:00:02.0: Boot video device
    [ 0.201548] PCI: CLS 64 bytes, default 64
    [ 0.201591] Unpacking initramfs...
    [ 0.261406] Freeing initrd memory: 2880k freed
    [ 0.261899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.261905] software IO TLB [mem 0xd5c9b000-0xd9c9b000] (64MB) mapped at [ffff8800d5c9b000-ffff8800d9c9afff]
    [ 0.262304] audit: initializing netlink socket (disabled)
    [ 0.262319] type=2000 audit(1366727880.259:1): initialized
    [ 0.276840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.278407] VFS: Disk quotas dquot_6.5.2
    [ 0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.278614] msgmni has been set to 11730
    [ 0.278836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.278888] io scheduler noop registered
    [ 0.278891] io scheduler deadline registered
    [ 0.278897] io scheduler cfq registered (default)
    [ 0.279146] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.279147] vesafb: scrolling: redraw
    [ 0.279149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.279531] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
    [ 0.344149] Console: switching to colour frame buffer device 128x48
    [ 0.408701] fb0: VESA VGA frame buffer device
    [ 0.408712] intel_idle: MWAIT substates: 0x21120
    [ 0.408714] intel_idle: v0.4 model 0x2A
    [ 0.408715] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.408750] GHES: HEST is not enabled!
    [ 0.408800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.409237] Linux agpgart interface v0.103
    [ 0.409304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
    [ 0.416404] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.416417] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.416540] mousedev: PS/2 mouse device common for all mice
    [ 0.416900] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.416930] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.417022] cpuidle: using governor ladder
    [ 0.417127] cpuidle: using governor menu
    [ 0.417129] EFI Variables Facility v0.08 2004-May-17
    [ 0.417180] drop_monitor: Initializing network drop monitor service
    [ 0.417252] TCP: cubic registered
    [ 0.417348] NET: Registered protocol family 10
    [ 0.417495] NET: Registered protocol family 17
    [ 0.417505] Key type dns_resolver registered
    [ 0.417796] PM: Hibernation image not present or could not be loaded.
    [ 0.417805] registered taskstats version 1
    [ 0.418395] Magic number: 9:780:637
    [ 0.418468] rtc_cmos 00:05: setting system clock to 2013-04-23 14:38:01 UTC (1366727881)
    [ 0.420125] Freeing unused kernel memory: 820k freed
    [ 0.420254] Write protecting the kernel read-only data: 8192k
    [ 0.423156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.424428] Freeing unused kernel memory: 1224k freed
    [ 0.425960] Freeing unused kernel memory: 440k freed
    [ 0.433142] systemd-udevd[57]: starting version 201
    [ 0.458283] ACPI: bus type usb registered
    [ 0.458349] usbcore: registered new interface driver usbfs
    [ 0.458370] usbcore: registered new interface driver hub
    [ 0.458506] usbcore: registered new device driver usb
    [ 0.458848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.458984] ehci-pci: EHCI PCI platform driver
    [ 0.459037] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.459041] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.459047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.459062] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.462962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.462983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
    [ 0.463303] SCSI subsystem initialized
    [ 0.464366] ACPI: bus type scsi registered
    [ 0.464443] libata version 3.00 loaded.
    [ 0.464501] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.464512] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
    [ 0.470946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.471264] hub 1-0:1.0: USB hub found
    [ 0.471272] hub 1-0:1.0: 2 ports detected
    [ 0.471541] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.471545] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.471551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.471576] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.475501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.475524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
    [ 0.484257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.484616] hub 3-0:1.0: USB hub found
    [ 0.484625] hub 3-0:1.0: 2 ports detected
    [ 0.484916] ahci 0000:00:1f.2: version 3.0
    [ 0.485018] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    [ 0.485078] ahci: SSS flag set, parallel bus scan disabled
    [ 0.485142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
    [ 0.485145] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 0.485152] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.498266] scsi0 : ahci
    [ 0.498400] scsi1 : ahci
    [ 0.498501] scsi2 : ahci
    [ 0.498607] scsi3 : ahci
    [ 0.498716] scsi4 : ahci
    [ 0.498823] scsi5 : ahci
    [ 0.498879] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
    [ 0.498883] ata2: DUMMY
    [ 0.498885] ata3: DUMMY
    [ 0.498888] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
    [ 0.498891] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
    [ 0.498893] ata6: DUMMY
    [ 0.527671] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
    [ 0.527678] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 0.527683] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 0.527688] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 0.527693] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 0.527949] xHCI xhci_add_endpoint called for root hub
    [ 0.527951] xHCI xhci_check_bandwidth called for root hub
    [ 0.527980] hub 2-0:1.0: USB hub found
    [ 0.527988] hub 2-0:1.0: 2 ports detected
    [ 0.528084] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.528088] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
    [ 0.528278] xHCI xhci_add_endpoint called for root hub
    [ 0.528282] xHCI xhci_check_bandwidth called for root hub
    [ 0.528325] hub 4-0:1.0: USB hub found
    [ 0.528336] hub 4-0:1.0: 2 ports detected
    [ 0.777504] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.817457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.818156] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000, CXM02K1Q, max UDMA/133
    [ 0.818173] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.818687] ata1.00: configured for UDMA/133
    [ 0.818930] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
    [ 0.901417] hub 1-1:1.0: USB hub found
    [ 0.901487] hub 1-1:1.0: 6 ports detected
    [ 1.007327] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.131530] hub 3-1:1.0: USB hub found
    [ 1.131707] hub 3-1:1.0: 6 ports detected
    [ 1.137166] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.210698] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.263792] tsc: Refined TSC clocksource calibration: 1596.373 MHz
    [ 1.263808] Switching to clocksource tsc
    [ 1.456959] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.460046] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.460135] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.460139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.460170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.461145] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.461569] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668989] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.706891] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
    [ 1.790244] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 1.791051] systemd[1]: Set hostname to <530uarch>.
    [ 1.859141] systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
    [ 1.859155] systemd[1]: Cannot add dependency job for unit laptop-mode.service, ignoring: Unit laptop-mode.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode.service' for details.
    [ 1.859170] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 1.859349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.859395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.859406] systemd[1]: Starting Remote File Systems.
    [ 1.859417] systemd[1]: Reached target Remote File Systems.
    [ 1.859425] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
    [ 1.859434] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.859461] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.859468] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.859487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.859494] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.859516] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.859524] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.859547] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.859558] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.859587] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.859595] systemd[1]: Starting Paths.
    [ 1.859603] systemd[1]: Reached target Paths.
    [ 1.859626] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.859714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.859722] systemd[1]: Starting Encrypted Volumes.
    [ 1.859731] systemd[1]: Reached target Encrypted Volumes.
    [ 1.859784] systemd[1]: Starting udev Kernel Socket.
    [ 1.859803] systemd[1]: Listening on udev Kernel Socket.
    [ 1.859845] systemd[1]: Starting udev Control Socket.
    [ 1.859868] systemd[1]: Listening on udev Control Socket.
    [ 1.859877] systemd[1]: Starting Journal Socket.
    [ 1.859912] systemd[1]: Listening on Journal Socket.
    [ 1.859945] systemd[1]: Mounting Huge Pages File System...
    [ 1.893494] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.898344] systemd[1]: Started Load Kernel Modules.
    [ 1.898365] systemd[1]: Mounted FUSE Control File System.
    [ 1.899753] systemd[1]: Starting Apply Kernel Variables...
    [ 1.923663] systemd[1]: Mounting Configuration File System...
    [ 1.930086] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.936854] systemd[1]: Starting Journal Service...
    [ 1.950121] systemd[1]: Started Journal Service.
    [ 1.950178] systemd[1]: Starting Setup Virtual Console...
    [ 1.960089] systemd[1]: Starting Create static device nodes in /dev...
    [ 1.967386] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.967414] systemd[1]: Mounting Debug File System...
    [ 1.976595] systemd[1]: Starting Swap.
    [ 1.976618] systemd[1]: Reached target Swap.
    [ 1.976647] systemd[1]: Mounting Temporary Directory...
    [ 2.023332] systemd[1]: Started File System Check on Root Device.
    [ 2.023347] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 2.060070] systemd[1]: Expecting device dev-disk-by\x2duuid-1166c42d\x2dd01a\x2d40bf\x2d8926\x2d2795b3f0b834.device...
    [ 2.060097] systemd[1]: Expecting device dev-disk-by\x2duuid-C332\x2d535C.device...
    [ 2.060597] systemd[1]: Mounted Huge Pages File System.
    [ 2.060732] systemd[1]: Mounted POSIX Message Queue File System.
    [ 2.062885] EXT4-fs (sda1): re-mounted. Opts: commit=15,data=ordered,discard
    [ 2.079953] systemd[1]: Started Apply Kernel Variables.
    [ 2.080081] systemd[1]: Mounted Configuration File System.
    [ 2.091845] systemd[1]: Started Setup Virtual Console.
    [ 2.093312] systemd[1]: Started Create static device nodes in /dev.
    [ 2.093419] systemd[1]: Mounted Debug File System.
    [ 2.093493] systemd[1]: Mounted Temporary Directory.
    [ 2.093753] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 2.106639] systemd[1]: Started udev Coldplug all Devices.
    [ 2.106691] systemd[1]: Starting Load Random Seed...
    [ 2.113536] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.119903] systemd[1]: Started Load Random Seed.
    [ 2.122479] systemd-udevd[142]: starting version 202
    [ 2.126885] systemd[1]: Started udev Kernel Device Manager.
    [ 2.126941] systemd[1]: Starting Local File Systems (Pre).
    [ 2.126955] systemd[1]: Reached target Local File Systems (Pre).
    [ 2.182697] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
    [ 2.182707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182713] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182733] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.183607] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.184967] ACPI: Requesting acpi_cpufreq
    [ 2.187346] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 2.187393] ACPI: Lid Switch [LID0]
    [ 2.187480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 2.187487] ACPI: Power Button [PWRB]
    [ 2.190425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.190433] ACPI: Power Button [PWRF]
    [ 2.191578] mei 0000:00:16.0: setting latency timer to 64
    [ 2.191674] mei 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 2.198369] [drm] Initialized drm 1.1.0 20060810
    [ 2.198487] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
    [ 2.198496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.207287] ACPI: Battery Slot [BAT1] (battery present)
    [ 2.210635] ACPI: Fan [FAN0] (off)
    [ 2.210696] ACPI: Fan [FAN1] (off)
    [ 2.210754] ACPI: Fan [FAN2] (off)
    [ 2.210806] ACPI: Fan [FAN3] (off)
    [ 2.210877] ACPI: Fan [FAN4] (off)
    [ 2.211218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 2.213278] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.213283] ACPI: Thermal Zone [TZ00] (61 C)
    [ 2.214137] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.214139] ACPI: Thermal Zone [TZ01] (30 C)
    [ 2.231486] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.231742] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.236625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.236988] r8169 0000:02:00.0: irq 48 for MSI/MSI-X
    [ 2.237512] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004ef8000, e8:03:9a:97:b5:a7, XID 0c900800 IRQ 48
    [ 2.237516] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.254854] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.258073] samsung_laptop: detected SABI interface: SwSmi@
    [ 2.258077] samsung_laptop: Backlight controlled by ACPI video driver
    [ 2.271599] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.271604] Copyright(c) 2003-2012 Intel Corporation
    [ 2.272199] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
    [ 2.273865] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 2.274238] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.274354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.276284] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.276358] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
    [ 2.276360] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1166c42d-d01a-40bf-8926-2795b3f0b834...
    [ 2.277330] [drm] Memory usable by graphics device = 2048M
    [ 2.277337] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 2.277340] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 2.277356] Console: switching to colour dummy device 80x25
    [ 2.277856] i915 0000:00:02.0: setting latency timer to 64
    [ 2.293728] iTCO_vendor_support: vendor-support=0
    [ 2.294474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.295948] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.296080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.296784] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.296789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.296792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.296794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
    [ 2.296797] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
    [ 2.296800] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
    [ 2.297034] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.309676] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.309725] systemd[1]: Mounting /mnt/shard...
    [ 2.315045] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.326398] i915 0000:00:02.0: irq 50 for MSI/MSI-X
    [ 2.326694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.326697] [drm] Driver supports precise vblank timestamp query.
    [ 2.326780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.329470] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.335638] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339922] systemd[1]: Starting Sound Card.
    [ 2.339944] systemd[1]: Reached target Sound Card.
    [ 2.344210] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.353017] systemd-udevd[151]: renamed network interface eth0 to enp2s0
    [ 2.356365] systemd-udevd[152]: renamed network interface wlan0 to wlp1s0
    [ 2.359280] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 2.403861] fbcon: inteldrmfb (fb0) is primary device
    [ 2.412172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: commit=15,data=ordered,discard
    [ 2.523824] usb 3-1.5: USB disconnect, device number 3
    [ 2.608485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.615267] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 2.885607] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 2.900591] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
    [ 2.975438] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
    [ 3.013202] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 3.020042] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 3.252446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
    [ 3.415660] Console: switching to colour frame buffer device 170x48
    [ 3.424244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.424247] i915 0000:00:02.0: registered panic notifier
    [ 3.436609] acpi device:32: registered as cooling_device9
    [ 3.436968] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 3.437019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 3.437169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 3.496648] Non-volatile memory driver v1.3
    [ 3.963276] Bluetooth: Core ver 2.16
    [ 3.963296] NET: Registered protocol family 31
    [ 3.963298] Bluetooth: HCI device and connection manager initialized
    [ 3.963305] Bluetooth: HCI socket layer initialized
    [ 3.963307] Bluetooth: L2CAP socket layer initialized
    [ 3.963313] Bluetooth: SCO socket layer initialized
    [ 3.964708] usbcore: registered new interface driver btusb
    [ 4.338375] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4.468607] media: Linux media interface: v0.10
    [ 4.471891] Linux video capture interface: v2.00
    [ 4.518478] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
    [ 4.537926] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
    [ 4.538078] usbcore: registered new interface driver uvcvideo
    [ 4.538083] USB Video Class driver (1.1.1)
    [ 6.473768] wlp1s0: authenticate with 00:24:8c:eb:ff:66
    [ 6.480100] wlp1s0: send auth to 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.482750] wlp1s0: authenticated
    [ 6.483074] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
    [ 6.483084] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 6.483367] wlp1s0: associate with 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.486701] wlp1s0: RX AssocResp from 00:24:8c:eb:ff:66 (capab=0x431 status=0 aid=2)
    [ 6.496708] wlp1s0: associated
    [ 6.496833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
    [ 6.534112] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:8c:eb:ff:66
    [ 776.460690] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 776.473529] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 969.874854] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 969.887746] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1061.757868] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1061.790334] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1346.112078] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1346.143576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2241.768058] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2241.780927] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2341.444767] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2341.479230] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    cat /etc/asound.conf (which was working)
    defaults.pcm.card 0
    defaults.pcm.device 0
    defaults.ctl.card 0
    Trying to play a file:
    mplayer Music/Arctic\ Monkeys/Favourite\ Most\ Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3
    MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
    [ass] FcFreeTypeQueryFace failed
    Cannot open file '/home/dan/.mplayer/input.conf': No such file or directory
    Failed to open /home/dan/.mplayer/input.conf.
    Can't open joystick device /dev/input/js0: No such file or directory
    Can't init input joystick
    Playing Music/Arctic Monkeys/Favourite Most Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3.
    Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
    [mp3 @ 0x7f7b7e07d760]max_analyze_duration 5000000 reached at 5015510 microseconds
    [lavf] stream 0: audio (mp3), -aid 0
    Clip info:
    title: teddy picker
    artist: Arctic Monkeys
    album: Favourite Worst Nightmare
    track: 2
    language: German
    genre: Rock
    encoded_by: LAME 3.97
    date: 2007
    Load subtitles in Music/Arctic Monkeys/Favourite Most Nightmare/
    Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
    AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
    AO: [pulse] Init failed: Connection refused
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Video: no video
    Starting playback...
    A: 1.9 (01.8) of 163.2 (02:43.1) 1.6%
    aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    speaker-test -c 2
    speaker-test 1.0.27
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    1 - Front Right
    Time per period = 5.651455
    Last edited by Kotrfa (2013-04-23 15:32:42)

    Same for me after system upgrade on 2013-05-01:
    pacmatic -Syu
    Since then, no Audio output via HDMI anymore. Mainboard is Intel DH67BL.
    Before upgrade, it worked. Audio via normal audio connector also still works.
    $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    But on the connected (via HDMI) TV is nothing to hear. Video on TV via HDMI works. Checked also alsamixer volume setting.
    With this, I hear the sound on the speakers connected with the Mainboard:
    $ aplay /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    $ aplay -l
    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    $ lsmod | grep snd
    snd_hda_codec_hdmi 24877 1
    snd_hda_codec_realtek 53315 1
    snd_hda_intel 28850 1
    snd_hda_codec 87310 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 4746 1 snd_hda_codec
    snd_pcm 62851 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
    snd_timer 14846 1 snd_pcm
    snd 44486 9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 4386 1 snd
    $ cat /proc/asound/modules
    0 snd_hda_intel
    I've read this, but did not help:
    https://wiki.archlinux.org/index.php/Ta … chitecture
    Here the list of upgraded packages:
    grep 2013-05-01.*pgraded /var/log/pacman.log
    http://pastebin.com/vXjp3Bw4
    I also downgraded to the kernel version before upgrade:
    pacman -U /var/cache/pacman/pkg/linux-3.7.4-1-i686.pkg.tar.xz
    But that did not solve the problem. Also using linux-lts kernel did not help.
    I have posted this also on the german Arch Linux board:
    https://bbs.archlinux.de/viewtopic.php?id=23955
    Last edited by 1970 (2013-05-06 05:23:59)

  • Headphone output stopped working (snd-hda, Dell XPS 13)

    Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
    My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
    AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
    I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
    I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
    I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
    I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
    The closest I've been able to get at the problem is this:
    [~]% alsactl monitor
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
    Any hints would be greatly appreciated!
    More info:
    [~]% cat /etc/modprobe.d/alsa-base.conf
    options snd-hda-intel enable=0,1
    options snd-hda-intel model=dell-headset-multi,dell-headset-multi
    This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
    $ cat /sys/module/snd_hda_intel/parameters/model
    dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    To verify these options are actually being used
    $ id -Gn
    martin wheel video audio vboxusers nfs
    I'm in the audio group, not sure if this is required, but can't hurt.
    [~]# cat /etc/asound.conf
    # Use PulseAudio by default
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    # vim:set ft=alsaconf:
    Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
    Some misc. info:
    $ grep Codec /proc/asound/card*/codec*
    Codec: Realtek ALC3661
    [~]% lsmod | grep ^snd
    snd_usb_audio 135316 0
    snd_usbmidi_lib 27484 1 snd_usb_audio
    snd_rawmidi 26806 1 snd_usbmidi_lib
    snd_seq_device 13132 1 snd_rawmidi
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
    snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    $ lspci -vv
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel modules: snd_hda_intel
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 59
    Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
    [ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
    [ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
    [ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
    [ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
    [ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
    [ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
    [ 0.000000] On node 0 totalpages: 1973782
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12386 pages used for memmap
    [ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18392 pages used for memmap
    [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 31981568 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.295 MHz processor
    [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
    [ 0.000042] pid_max: default: 32768 minimum: 301
    [ 0.000050] ACPI: Core revision 20140424
    [ 0.020000] ACPI: All ACPI Tables successfully acquired
    [ 0.020260] Security Framework initialized
    [ 0.020267] Yama: becoming mindful.
    [ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024116] Initializing cgroup subsys memory
    [ 0.024140] Initializing cgroup subsys devices
    [ 0.024147] Initializing cgroup subsys freezer
    [ 0.024150] Initializing cgroup subsys net_cls
    [ 0.024155] Initializing cgroup subsys blkio
    [ 0.024183] CPU: Physical Processor ID: 0
    [ 0.024184] CPU: Processor Core ID: 0
    [ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025376] mce: CPU supports 7 MCE banks
    [ 0.025391] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.026475] ftrace: allocating 20445 entries in 80 pages
    [ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.071098] TSC deadline timer enabled
    [ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.071149] ... version: 3
    [ 0.071150] ... bit width: 48
    [ 0.071151] ... generic registers: 4
    [ 0.071152] ... value mask: 0000ffffffffffff
    [ 0.071154] ... max period: 0000ffffffffffff
    [ 0.071155] ... fixed-purpose events: 3
    [ 0.071156] ... event mask: 000000070000000f
    [ 0.097907] x86: Booting SMP configuration:
    [ 0.097909] .... node #0, CPUs: #1
    [ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.119293] #2 #3
    [ 0.154938] x86: Booted up 1 node, 4 CPUs
    [ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
    [ 0.160676] devtmpfs: initialized
    [ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
    [ 0.164642] pinctrl core: initialized pinctrl subsystem
    [ 0.164688] RTC time: 22:42:27, date: 10/21/14
    [ 0.164750] NET: Registered protocol family 16
    [ 0.164884] cpuidle: using governor ladder
    [ 0.164887] cpuidle: using governor menu
    [ 0.164916] ACPI: bus type PCI registered
    [ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.165118] PCI: Using configuration type 1 for base access
    [ 0.165125] dmi type 0xB1 record - unknown flag
    [ 0.177572] ACPI: Added _OSI(Module Device)
    [ 0.177575] ACPI: Added _OSI(Processor Device)
    [ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.207326] ACPI: Dynamic OEM Table Load:
    [ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.220827] ACPI: Dynamic OEM Table Load:
    [ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.237345] ACPI: Dynamic OEM Table Load:
    [ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.255255] ACPI: Interpreter enabled
    [ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.255298] ACPI: (supports S0 S3 S4 S5)
    [ 0.255300] ACPI: Using IOAPIC for interrupt routing
    [ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.268573] \_SB_.PCI0:_OSC invalid UUID
    [ 0.268575] _OSC request data:1 1f 0
    [ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.269580] PCI host bridge to bus 0000:00
    [ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
    [ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
    [ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
    [ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
    [ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
    [ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
    [ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
    [ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
    [ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
    [ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
    [ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
    [ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
    [ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.295559] vgaarb: loaded
    [ 0.295560] vgaarb: bridge control possible 0000:00:02.0
    [ 0.295603] PCI: Using ACPI for IRQ routing
    [ 0.297024] PCI: pci_cache_line_size set to 64 bytes
    [ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
    [ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
    [ 0.297209] NetLabel: Initializing
    [ 0.297211] NetLabel: domain hash size = 128
    [ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.297225] NetLabel: unlabeled traffic allowed by default
    [ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.299294] Switched to clocksource hpet
    [ 0.305097] pnp: PnP ACPI init
    [ 0.305113] ACPI: bus type PNP registered
    [ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.305256] system 00:00: [io 0xffff] has been reserved
    [ 0.305259] system 00:00: [io 0xffff] has been reserved
    [ 0.305262] system 00:00: [io 0xffff] has been reserved
    [ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
    [ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
    [ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.306696] pnp: PnP ACPI: found 7 devices
    [ 0.306698] ACPI: bus type PNP unregistered
    [ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.313661] NET: Registered protocol family 2
    [ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.314216] TCP: reno registered
    [ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314329] NET: Registered protocol family 1
    [ 0.314345] pci 0000:00:02.0: Boot video device
    [ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314702] PCI: CLS 64 bytes, default 64
    [ 0.314746] Unpacking initramfs...
    [ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
    [ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
    [ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.390043] Scanning for low memory corruption every 60 seconds
    [ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.392315] zbud: loaded
    [ 0.392526] VFS: Disk quotas dquot_6.5.2
    [ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.392709] msgmni has been set to 15022
    [ 0.392776] Key type big_key registered
    [ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.393009] io scheduler noop registered
    [ 0.393014] io scheduler deadline registered
    [ 0.393072] io scheduler cfq registered (default)
    [ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.393482] intel_idle: MWAIT substates: 0x11142120
    [ 0.393484] intel_idle: v0.4 model 0x45
    [ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.393772] GHES: HEST is not enabled!
    [ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394367] Linux agpgart interface v0.103
    [ 0.394421] rtc_cmos 00:01: RTC can wake from S4
    [ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.394611] Intel P-state driver initializing.
    [ 0.394625] Intel pstate controlling: cpu 0
    [ 0.394647] Intel pstate controlling: cpu 1
    [ 0.394663] Intel pstate controlling: cpu 2
    [ 0.394684] Intel pstate controlling: cpu 3
    [ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.395139] TCP: cubic registered
    [ 0.395367] NET: Registered protocol family 10
    [ 0.395811] NET: Registered protocol family 17
    [ 0.396487] registered taskstats version 1
    [ 0.397305] Magic number: 2:622:755
    [ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
    [ 0.397659] PM: Hibernation image not present or could not be loaded.
    [ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.399554] Write protecting the kernel read-only data: 8192k
    [ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 0.412549] systemd-udevd[57]: starting version 216
    [ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.430313] sdhci: Secure Digital Host Controller Interface driver
    [ 0.430315] sdhci: Copyright(c) Pierre Ossman
    [ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.441502] ACPI: bus type USB registered
    [ 0.441544] usbcore: registered new interface driver usbfs
    [ 0.441562] usbcore: registered new interface driver hub
    [ 0.441712] usbcore: registered new device driver usb
    [ 0.442370] SCSI subsystem initialized
    [ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.442897] ehci-pci: EHCI PCI platform driver
    [ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.444256] libata version 3.00 loaded.
    [ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
    [ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.456468] hub 1-0:1.0: USB hub found
    [ 0.456636] hub 1-0:1.0: 2 ports detected
    [ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.457437] hub 2-0:1.0: USB hub found
    [ 0.457454] hub 2-0:1.0: 9 ports detected
    [ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.460861] hub 3-0:1.0: USB hub found
    [ 0.460871] hub 3-0:1.0: 4 ports detected
    [ 0.461773] ahci 0000:00:1f.2: version 3.0
    [ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
    [ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
    [ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.473307] scsi0 : ahci
    [ 0.473445] scsi1 : ahci
    [ 0.473555] scsi2 : ahci
    [ 0.473668] scsi3 : ahci
    [ 0.473715] ata1: DUMMY
    [ 0.473717] ata2: DUMMY
    [ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
    [ 0.473721] ata4: DUMMY
    [ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
    [ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.794069] ata3.00: configured for UDMA/133
    [ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
    [ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
    [ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.799393] sda: sda3 sda4
    [ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.887143] hub 1-1:1.0: USB hub found
    [ 0.887202] hub 1-1:1.0: 8 ports detected
    [ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
    [ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
    [ 0.981520] FS-Cache: Loaded
    [ 0.992070] RPC: Registered named UNIX socket transport module.
    [ 0.992075] RPC: Registered udp transport module.
    [ 0.992077] RPC: Registered tcp transport module.
    [ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
    [ 1.007058] Netfilter messages via NETLINK v0.30.
    [ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
    [ 1.023856] vboxdrv: Found 4 processor cores.
    [ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
    [ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
    [ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.322293] systemd-udevd[170]: starting version 216
    [ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
    [ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
    [ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
    [ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
    [ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
    [ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.576090] [drm] Initialized drm 1.1.0 20060810
    [ 1.580291] random: nonblocking pool is initialized
    [ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
    [ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
    [ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
    [ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
    [ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.622639] sound hdaudioC0D0: inputs:
    [ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
    [ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
    [ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
    [ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
    [ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 1.628924] ACPI: Power Button [PWRB]
    [ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 1.630785] ACPI: Lid Switch [LID0]
    [ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 1.631327] ACPI: Power Button [PWRF]
    [ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
    [ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.641000] wmi: Mapper loaded
    [ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.644274] AVX2 version of gcm_enc/dec engaged.
    [ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 1.707814] iTCO_vendor_support: vendor-support=0
    [ 1.709016] [drm] Memory usable by graphics device = 2048M
    [ 1.709022] [drm] Replacing VGA console driver
    [ 1.710234] Console: switching to colour dummy device 80x25
    [ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
    [ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
    [ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
    [ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
    [ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
    [ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
    [ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.730563] [drm] Driver supports precise vblank timestamp query.
    [ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
    [ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
    [ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
    [ 1.756260] [drm] VBT doesn't support DRRS
    [ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
    [ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
    [ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
    [ 1.775456] fbcon: inteldrmfb (fb0) is primary device
    [ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [ 1.808667] mousedev: PS/2 mouse device common for all mice
    [ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2.394398] Switched to clocksource tsc
    [ 2.838140] Console: switching to colour frame buffer device 240x67
    [ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.845936] i915 0000:00:02.0: registered panic notifier
    [ 2.876371] media: Linux media interface: v0.10
    [ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
    [ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.879690] usbcore: registered new interface driver usbhid
    [ 2.879694] usbhid: USB HID core driver
    [ 2.883145] Linux video capture interface: v2.00
    [ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
    [ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
    [ 2.895830] Bluetooth: Core ver 2.19
    [ 2.895849] NET: Registered protocol family 31
    [ 2.895852] Bluetooth: HCI device and connection manager initialized
    [ 2.895861] Bluetooth: HCI socket layer initialized
    [ 2.895864] Bluetooth: L2CAP socket layer initialized
    [ 2.895877] Bluetooth: SCO socket layer initialized
    [ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
    [ 2.901827] usbcore: registered new interface driver uvcvideo
    [ 2.901830] USB Video Class driver (1.1.1)
    [ 2.910511] usbcore: registered new interface driver btusb
    [ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
    [ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
    [ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
    [ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 36.061335] wlan0: authenticated
    [ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 36.070080] wlan0: associated
    [ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
    [ 4501.338278] PM: Syncing filesystems ...
    [ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.348617] done.
    [ 4501.348622] PM: Preparing system for mem sleep
    [ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 4501.351580] PM: Entering mem sleep
    [ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
    [ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.361609] cfg80211: Calling CRDA for country: DE
    [ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
    [ 4501.992409] PM: suspend of devices complete after 640.028 msecs
    [ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
    [ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
    [ 4502.019816] ACPI: Preparing to enter system sleep state S3
    [ 4502.020586] PM: Saving platform NVS memory
    [ 4502.021109] Disabling non-boot CPUs ...
    [ 4502.021139] intel_pstate CPU 1 exiting
    [ 4502.022404] kvm: disabling virtualization on CPU1
    [ 4502.022854] smpboot: CPU 1 is now offline
    [ 4502.023143] intel_pstate CPU 2 exiting
    [ 4502.024386] kvm: disabling virtualization on CPU2
    [ 4502.125774] smpboot: CPU 2 is now offline
    [ 4502.126039] intel_pstate CPU 3 exiting
    [ 4502.127395] kvm: disabling virtualization on CPU3
    [ 4502.229207] smpboot: CPU 3 is now offline
    [ 4502.232189] ACPI: Low-level resume complete
    [ 4502.232259] PM: Restoring platform NVS memory
    [ 4502.232774] Enabling non-boot CPUs ...
    [ 4502.232814] x86: Booting SMP configuration:
    [ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 4502.245238] kvm: enabling virtualization on CPU1
    [ 4502.247462] Intel pstate controlling: cpu 1
    [ 4502.247514] CPU1 is up
    [ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 4502.259870] kvm: enabling virtualization on CPU2
    [ 4502.262107] Intel pstate controlling: cpu 2
    [ 4502.262155] CPU2 is up
    [ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 4502.274504] kvm: enabling virtualization on CPU3
    [ 4502.276760] Intel pstate controlling: cpu 3
    [ 4502.276807] CPU3 is up
    [ 4502.282141] ACPI: Waking up from system sleep state S3
    [ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
    [ 4502.303102] PM: early resume of devices complete after 0.384 msecs
    [ 4502.303194] usb usb2: root hub lost power or was reset
    [ 4502.303197] usb usb3: root hub lost power or was reset
    [ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 4502.329054] sd 2:0:0:0: [sda] Starting disk
    [ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4502.652119] ata3.00: configured for UDMA/133
    [ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
    [ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
    [ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
    [ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
    [ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
    [ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
    [ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
    [ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
    [ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
    [ 4503.274732] PM: resume of devices complete after 970.836 msecs
    [ 4503.275664] PM: Finishing wakeup.
    [ 4503.275668] Restarting tasks ...
    [ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276362] usb 2-5: USB disconnect, device number 3
    [ 4503.276546] pci_bus 0000:01: Allocating resources
    [ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 4503.276596] done.
    [ 4503.276614] pci_bus 0000:02: Allocating resources
    [ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
    [ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
    [ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.276778] pci 0000:00:00.0: using default PCI settings
    [ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.276795] i915 0000:00:02.0: using default PCI settings
    [ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.276980] pci 0000:00:1f.3: using default PCI settings
    [ 4503.277590] pci_bus 0000:01: Allocating resources
    [ 4503.277619] pci_bus 0000:02: Allocating resources
    [ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.277673] pci 0000:00:00.0: using default PCI settings
    [ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.277690] i915 0000:00:02.0: using default PCI settings
    [ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.277875] pci 0000:00:1f.3: using default PCI settings
    [ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
    [ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
    [ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4506.058296] dell_wmi: Unknown key e00e pressed
    [ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
    [ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 4507.053766] wlan0: authenticated
    [ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 4507.065241] wlan0: associated
    [ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
    [ 4813.124097] hub 2-2:1.0: USB hub found
    [ 4813.124371] hub 2-2:1.0: 4 ports detected
    [ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
    [ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
    [ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
    [ 4813.515300] usbcore: registered new interface driver snd-usb-audio
    [ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
    [ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
    [ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
    [ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
    [ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
    [ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
    [ 4814.121931] usbcore: registered new interface driver ax88179_178a
    [ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
    [ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6509.605763] usb 2-2: USB disconnect, device number 6
    [ 6509.605773] usb 2-2.2: USB disconnect, device number 7
    [ 6509.660447] usb 2-2.3: USB disconnect, device number 8
    [ 6509.692281] usb 2-2.4: USB disconnect, device number 9
    [ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
    [ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
    [ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
    [ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
    [ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6511.071805] PM: Syncing filesystems ...
    [ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.087129] done.
    [ 6511.087139] PM: Preparing system for mem sleep
    [ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 6511.090294] PM: Entering mem sleep
    [ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
    [ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
    [ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
    [ 6511.720807] PM: suspend of devices complete after 629.628 msecs
    [ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
    [ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
    [ 6511.748271] ACPI: Preparing to enter system sleep state S3
    [ 6511.749033] PM: Saving platform NVS memory
    [ 6511.749584] Disabling non-boot CPUs ...
    [ 6511.749628] intel_pstate CPU 1 exiting
    [ 6511.751130] kvm: disabling virtualization on CPU1
    [ 6511.752157] smpboot: CPU 1 is now offline
    [ 6511.752650] intel_pstate CPU 2 exiting
    [ 6511.754091] kvm: disabling virtualization on CPU2
    [ 6511.754112] smpboot: CPU 2 is now offline
    [ 6511.755147] intel_pstate CPU 3 exiting
    [ 6511.756491] kvm: disabling virtualization on CPU3
    [ 6511.857520] smpboot: CPU 3 is now offline
    [ 6511.860099] ACPI: Low-level resume complete
    [ 6511.860168] PM: Restoring platform NVS memory
    [ 6511.860682] Enabling non-boot CPUs ...
    [ 6511.860725] x86: Booting SMP configuration:
    [ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 6511.873161] kvm: enabling virtualization on CPU1
    [ 6511.875384] Intel pstate controlling: cpu 1
    [ 6511.875441] CPU1 is up
    [ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 6511.887813] kvm: enabling virtualization on CPU2
    [ 6511.890055] Intel pstate controlling: cpu 2
    [ 6511.890104] CPU2 is up
    [ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 6511.902450] kvm: enabling virtualization on CPU3
    [ 6511.904715] Intel pstate controlling: cpu 3
    [ 6511.904763] CPU3 is up
    [ 6511.910077] ACPI: Waking up from system sleep state S3
    [ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
    [ 6511.931215] PM: early resume of devices complete after 0.474 msecs
    [ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 6511.931308] usb usb2: root hub lost power or was reset
    [ 6511.931310] usb usb3: root hub lost power or was reset
    [ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 6512.030458] sd 2:0:0:0: [sda] Starting disk
    [ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 6512.353607] ata3.0

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

  • Help! 6D lcd has stopped working and autofocus no longer working!

    Ok - I scoured the internet as best a I could and could not find any troubleshooting with the issue I am currently having with my 6D. The camera stopped working in the middle of photos I was taking of a sunset over the lake. The camera LCD was no longer working (allowing me to look at photos, bring up the menu etc) it was just black. However, when I turn the camera off, it displays the "sensor cleaning" on the back of the LCD so that must mean the screen is working, its just not allowing me to see any information displayed by my camera.
    The display at the top right of the camera by the shutter button that shows all the aperture, ISO and shutter information works and is accurately monitoring the light change. The display when I look through the viewfinder showing the light meter is working too. I can change settings in manual mode and it will display the changes in both the viewfinder and upper shoulder display.
    However, the other issue is the autofocus isn't working correctly. When the lens (and I've tried different lenses, they all have the same issue) tries to autofocus, It sometimes will correctly (I can see it hit focus when the small box in the viewfinder lights up ready) but the majority of the time It will just act like its in manual focus mode and shoot everytime the shutter is pressed.
    THE OTHER thing is the shutter button is permanently pressed in. Its not "raised" like it usually is allowing you to lightly tap it gain focus. I cannot change where the focus point is either, its permanently stuck on one to the right of the center point.
    One small detail, at some point during my shooting today the rubber eye cap around the viewfinder fell off. Not sure when this happened because I was wearing glasses and didn't notice it came off but was wondering that would cause any of these issues (can't see how it would..)
    I shot A LOT of photos today, all in RAW. I mean.. I was literally shooting all day for 8 hours, NON-STOP so I'm not sure if was something that could cause these issues either.
    The camera is still recording the correct image data to the card since the issue started, I checked on my computer.
    Not sure whats going on here, and I'm really worried! I'm worried that water or sand could have gotten into the camera and cause the issue, even thought I was being extra careful that this wouldn't happen since I was on the beach (Lake Michigan, fresh water).
    If anyone has any ideas to help please let me know!

    I suspect your last paragraph explains the problem. Try unstick in the shutter button by trying to carefully insert a business card between the button and camera body and sweep the circumference of the button to remove the sand particle.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Photostream in Aperture not working correctly

    I have turned on Photostream on my Mac and in Aperture. Photos taken with my iPhone appear in my photo stream, and also in the photo stream in Aperture.
    However, photos I import into Aperture from my camera do NOT appear in photo stream. Also, even if I drag and drop photos in Aperture into the Photo Steam folder thing, I get the "updating photo stream" status bar message in Aperture, but the photos never appear.
    This is driving me crazy.

    I have the EXACT same problem...All worked well for months.  A few days ago the problem started in the middle of an import in Aperture.  Half the pics got through, made it to the folder and streamed to my other devices before it stopped working...and now it won't work at all.  Since its working the other way (when a pic is taken from my iO5 devices they appear in the Aperture Photostream folder) it makes me think this is an Aperture problem.
    Curious if you've figured anthing out...I may reset photostream to see if that works but I don't want to lose my handy photostream file with 1000 pics on it.

  • Aperture not working after update.

    Hello,
      I just updated to OS 10.7.5 and also updated to Aperture ver. 3.4 (auto-updater) and now Aperture won't open, it just crashes.  I tried reinstalling, but it didn't help.  Another app. Canon EOS Utility also stopped working, I also reinstalled this to no avail.  I was using both of these programs yesturday with no problems.
    Can Anyone help with this?
      Thanks in advance.

    Deleting the .plist file will not cause you to delete the program or any images.
    Make sure you are looking for the .plist in your user library folder and not the system library folder...by default, the OS hides your user library folder from view...there are lots of ways to "unhide" it, but my preference is to do this:  http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    This will unhide it permanently so that the next time there is some kind of problem you will be able to easily delete the offending preferences file.
    Once you have done this, you can now go to ~/Library/Preferences/ and locate the com.apple.Aperture.plist file and delete it (where ~ represents your home folder, whatever you call it).
    If this does not solve your problem, you can reinstall the application, which takes a lot more time.

  • Skin smoothing stopped working and color overlay

    Hi All,
    Been tearing my hair out.
    The skin smoothing tool has stopped working completely across all projects. If I select "color overlay" in the gears menu, sometimes the existing smooth brush strokes appear in red,.. but mostly they don't.
    ** I can't add any new brush strokes ** they simply do not appear. Interestingly, if you select brush strokes you can see the strokes but the actual skin smooth filter isn't applied to the mask! WEIRD! You can also select invert and the filter is applied to the whole image - but you cannot manipulate the mask at all.
    I've reinstalled Aperture and I've also rebuilt the library but nothing seems to work.
    Background: I'm running Aperture 3.4.3 on Macbook Retina with latest OS, 16Gb/500SSD - nothing else and I'm shooting with a Nikon D800 in RAW.
    Does anyone have any ideas on how to fix this? I have a sweaty model that needs airbrushing ASAP!
    Thanks,
    Matthew

    Matthew, does it work, if you use a different Aperture library? Then repair your Aperture library.
    If it does not even work for a different Aperture library,try working from a different user account. Can you use the brushes there? If yes, remove your Aperture User Preferences from your User Library:
    The user library is hidden.  To reveal it, use the Finder's "Go" menu.
    Click somewhere on your empty Desktop to bring the Finder forward, then you'll see "Go" in the Finder's main menu bar.
    Then hold down the options key ⌥ until "library" appears in the drop down menu. Click Library to open.  Remove the file
    your Home Folder/Library/Preferences/com.apple.Aperture.plist.
    Regards
    Léonie

  • Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

    suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

    Maybe you hit the "p" key?
    Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

  • Aperture Stops Posting to Facebook Albums

    Hi All:
    I have done several searches on this topic, and have yet to see this precise problem. I have several Facebook albums [28]. Aperture sees them all. Up until this week, Aperture had no problem posting additional photos to these albums. But I have the following problem:
    1. Aperture 3 fails to add photos to albums [confirmation dialog is active, but no message is returned];
    2. Aperture posts to my Wall with no problem;
    3. I have deleted the Aperture app from Facebook and reauthenticated it;
    4. Neither iPhoto nor iPhoto Exporter is a permitted app on my FB account;
    5. I am working with photos from my Aperture library, not my Photo Stream;
    6. I have set and re-set the HTTPS settings on FB with no change;
    7. I have created new albums on FB from Aperture, but after loading up 1 or 2 photos, Aperture stops loading photos, and refuses to load any more. I can repeat this ad nauseam;
    8. I can add photos manually to FB albums, using their web tool, but intertestingly, the file dialog box does not "see" my most recent photo additions to my Aperture library.
    This is puzzling. Up until recently, Aperture functioned flawlessly with FB. Not pointing fingers, though my inclination is to blame FB, except for that item #8. Is there potentially something wrong with my APerture library?
    Thanks and Happy Holidays!

    I just ran a Consolidate Originals (Move) on the library, and that seemed to help. Aperture was able to publish new photos to albums, but, and this seems odd, in the FB Add Photos  dialog box (in Safari). photos I have added to my library over the last few days do not show up in the dialog box [item #8 above].

Maybe you are looking for