Aperture system setups?

Hi all,
I'm interested in finding out what kind of system setup's Pro Photographers use for there editing. I'm about to change my system and I'm looking at spending more time on photography and would be interested in tailoring my system to photography use.
Current System:
iMac 2.0 Ghz, 4 GB Ram, with extra 20" Cinema Display
Thanks,
Greg

Hi Greg,
Well, no one bit on this topic so I feel compelled to jump in.... Here's my Aperture setup:
• MacPro with two, 2.66 dual core processors.
• OS: 10.5.1
• Aperture 1.5.6
• Nine gb RAM.
• Thirty-inch Apple Cinema Display.
• NVIDIA GeForce 7300 GT video card. This is Apple's stock video card.
• Four, 750 gb Seagate internal drives. Two are raided together using Disk Utility. This is my storage area for Aperture files. Another is used for the OS while the fourth drive is used for backup files.
• Two external Firewire drives for daily backup of Aperture vaults. I do not use Time Machine to back up files on my computer.
My system runs Aperture quite well as it should with this much hardware being thrown at it. I noticed some slowdown after I added the 30-inch ACD. I originally built my system with a 20-inch ACD and Aperture ran really fast with that. I suspect the NVIDIA card I have may be somewhat lacking when supporting the 30-inch monitor. The only time I really noticed less than fluid behavior from Aperture on my system is when Aperture is processing a large number of files. Let's say I'm importing files from a hard drive. If I try to edit files when this is happening Aperture will become sluggish. My solution is to give Aperture a few minutes to finish building the previews before I start editing. No problems with slow performance then.
I shoot RAW files exclusively with a Nikon D200. I am planning the purchase a D300 the day Apple provides support for the file format in Aperture.
On a final note: I'm always amazed at how little time I have to spend editing and organizing photos in Aperture. I spend far more time shooting now than messing around with the files on the computer.

Similar Messages

How to do initialization for new system setup?

Hi, Experts:
I need your help! Can you tell me your suggestion please?
This is a new system setup. We are about to test on the Initialization/Delta process.
The data source is 2LIS_13_VDITM 7.0 version. The test is on the PSA.
I have done an EARLY Initialization. On R3 system, if a billing record is canceled, we are able to capture it in the RSA7. Then, we did a delta load which were successfully tranferred to BW system.
However, if I created a new order and push it to Billing, I am NOT able to find it on RSA7 of the Delta queue.
That would mean, the delta queue could not capture any new billing records.
Then, besides the early init, we tried to do an Initialization without Data Transfer in the hope that this could resolve the new records issue, it doesn't allow to do it, saying "no 2 initialization".
What is the right way to do initialization??
Thanks guys!!

Hello Sylvia,
Changing it to new delta mode need not clean out everything in BW.
its a change in R/3 side on how delta records will be pushed.
Delta queue will remain the same in R/3.
But since you have already missed some records and you are not sure which one.
Also the existing records in the delta queue are not the correct one as these are not bringing new records according to you.
So I will suggest you after you have done the changes to queued delta....do a fresh start.
Delete the data from the DSO.
1)delete the existing and do a new init without data transfer so that a new delta queue is created.
2)Fill the set up tables first and start the full repair loads to DSO.
3)once all the history is loaded then you can schedule the delta.
Thanks
Ajeet

Third party dropshipment process and system setup

Hi gentlemen,
I have a few question to check with you.
1 - What is the difference between Third Party Shipment, and Third Party Drop Shipment in term of process?
2 - What is the system setup requirement for Third Party Drop shipment (I know TAS is require for 3rd party, but what about 3rd party drop shipment)?
thanks
tuff

Hi Tuffy,
I did'nt quite get the context of what you mean by third party in this case. Is it a third party delivery which uses TAS item cat on the sales order.
Or we have scenarios where order is done by for example my company but there is an external ware house which receives my dleivery number probably through EDI who does the shipment and confirms back to SAP to trigger PGI.
Drop shipment in general business terms is used reduce the cost of inventory stocking. Like I just take orders and book it to a company, they do the shipment to the address I mention ( this goes as part of ship to party address ). Since the company does not from who all I can book orders they just maintain a drop ship customer.
You might find the below blog useful:
[One Time Ship To Party|/people/sadhu.kishore2/blog/2008/12/12/working-with-one-time-ship-to-party]
Regards
Sadhu Kishore

Ecc 6.0 file system setup in solaries

Hi,
I want to install ecc 6.0 on solaries system.
Can any one provide file system setup before starting the installation. Like /usr/sap this kind of file setup.
It will help ful to our installation.
Regards,
Venkat

Hi,
I think you are not clear, you have not reade upgrade guide. Please reade upgrade guide so many other thing to be require in installation. All are depend on the your company requirement and how much data will grow per month etc.
Regards,
Anil

Now that CS5 has arrived, what does it mean for your system setup?

Apart from nice added features, improved stability and increased speed, there are two major factors that impact on your system setup:
1. 64 bit
2. Mercury Playback Engine
64 Bit only
This means a couple of things:
You need a 64 bit OS, you need 64 bit plug-ins and you can use much more memory than the 4 GB limitation that applied to 32 bit OS'es (with effective memory in the 2 - 3 GB range, depending on the Boot.ini switch).
In practice, to benefit from the move from 32 bit to 64 bit, the recommended memory needs to be around 8 or 12 GB, depending on your mobo and chipset and the number of DIMM slots available. With current prices (May 2010) it is not yet economical to opt for 4 GB sticks.
If you have a dual socket board with 12 or more DIMM slots, 24 GB is optimal.
Mercury Playback Engine
This is where it gets interesting.
In the past, up to and including CS4 4.2.1, performance was largely impacted by:
1. CPU
2. Memory
3. Disk setup
4. OS & Tuning
5. ...
and finally by the video card. It did not really matter what video card you had installed. There never was any discernable performance gain from expensive video cards.
The tables have turned.
With CS5, installing a CUDA enabled video card has a large impact on performance and lessens the burden on the CPU. The GPU does a lot of the work.
However, since the CPU gets a lot more breathing space, the CPU will no longer be the primary bottelneck, as was often the case in the past. And since all DIMM slots in the average machine will be occupied, it is a costly exercise to exchange the DIMM sticks with larger capacity ones. People who have only 3 slots in use on a X58 motherboard can directly benefit from adding three more sticks, but this does not happen very often.
So with the CPU running with a relatively low load and memory more or less a given, the only thing that may be a bottleneck to be improved upon is the disk setup. This can be seen easily by scrubbing fast through the time line with the popular AVCHD material. Due to the MPEG nature, while scrubbing one needs to look backwards and forwards to create the image under the CTI and that means a lot of disk activity. CPU is not a bottleneck, memory is not a bottleneck and the GPU is not the bottleneck, it is the disk setup.
Do not be fooled by the claims that SATA2 or SATA3 have enough bandwidth to support the data rate of AVCHD or other MPEG streams. Tests have shown that significant performance gains can be achieved by using a large number of disks, preferably in a raid. This is especially true when one has multiple tracks.
SSD's are not yet an economical alternative for conventional hard disks, with prices that are a factor 30 - 50 higher per gigabyte than conventional disks.
Conclusion
To fully benefit from the performance gains that CS5 allows, it may be that using a MPE supported card will lead to the disk setup being the new bottleneck. Be aware of that fact.

at this point we are still trying to figure out whats up.
bear in mind DV VS AVCHD or Red is a completely different animal. there is a lot to process on encoding vs DV
we think the processors and HDDs are sitting there waiting on CS5
even with Dual Xeon 2.8GHz 12 cores its no faster than the 980x niether are CPU pegging, HDD pegging or ram..
interesting is the Dual Xeons will use about 10G (with 24G installed) ram vs the 980x using 6 (with 12 installed)
dual Xeons have dual memoery pipe lines 1 for each cpu so we think thats where its coming from
but we are still scratching our heads with a good deal of what we are finding in these benchmarks.
most is pointing to CS5 coding.
i am sure Eric will poke his head in here...
Scott
ADK

SAP Business One Best-Practice System Setup and Sizing

<b>SAP Business One Best-Practice System Setup and Sizing</b>
Get recommendations from SAP and hardware specialists on system setup and sizing
SAP Business One is a single, affordable, and easy-to-implement solution that integrates the entire business across financials, sales, customers, and operations. With SAP Business One, small businesses can streamline their operations, get instant and complete information, and accelerate profitable growth. SAP Business One is designed for companies with less than 100 employees, less than $75 million in annual revenue, and between 1 and 30 system users, referred to as the SAP Business One sweet spot. The sweet spot covers various industries and micro-verticals which have different requirements when it comes to the use of SAP Business One.
One of the initial steps during the installation and implementation of SAP Business One is the definition of the system landscape and architecture. Numerous factors affect the system landscape that needs to be created to efficiently run SAP Business One.
The <a href="http://wiki.sdn.sap.com/wiki/display/B1/BestPractiseSystemSetupand+Sizing">SAP Business One Best-Practice System Setup and Sizing Wiki</a> provides recommendations on how to size and configure the system landscape and architecture for SAP Business One based on best practices.

For such high volume licenses, you may contact the SAP Local Product Experts.
You may get their contact info from this site
[https://websmp209.sap-ag.de/~sapidb/011000358700001455542004#India]

Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

SMD - MANAGED SYSTEM SETUP WIZARD.

Hi,
I'm on Solman SPS 15, trying to setup EWA for portals.
Ran the managed system setup, got the error.
Step DataCollect Details
Initial Data Collect ERROR for host XXXXXXX
!! Exception : Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
at com.sap.sup.admin.scheduler.task.remote.AbstractGatherRemoteTask.checkTaskResult(AbstractGatherRemoteTask.java:42)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.parseXml(InitialConfigGatherTask.java:107)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.process(InitialConfigGatherTask.java:68)
at com.sap.sup.admin.scheduler.config.DataCollect.execute(DataCollect.java:138)
at com.sap.sup.admin.setup.AppCfgTasks.runInitialDataCollect(AppCfgTasks.java:57)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:305)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:263)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:655)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:28)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:903)
at java.lang.Thread.run(Thread.java:534).
Plz advise.
Thx in advance.

#1.#00144F17012A00C700000018000066BD0004506CFD4B5C16#1214328943107#/Applications/AdminConsole/ConfigurationChangeReportingUpload#sap.com/tcwddispwda#com.sap.sup.admin.upload.configreport.xml.ConfigurationChangeHandler#J2EE_ADMIN#16932##XXXXX_SID_28888050#J2EE_ADMIN#0964c860421111dd94ec00144f17012a#Thread[Thread-83,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/Applications/AdminConsole/ConfigurationChangeReportingUpload#Plain###[7498] storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1214257551084558, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 13:35:42 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true].
I found this in application log
Edited by: Kobby bryant on Jun 24, 2008 7:39 PM

Cisco Ironport ESA System setup wizard

Hi all,
i'm installing a Cisco ESA. I configured IP of Data1 and Management and Hostname with temporary data to enable feature keys.
Now i have to migrate those parameter to final configuration except management. IF i run again the system setup wizard does it blow up
the features installed and activated?
Thanks
smaikol

If you re-run systemsetup again from the CLI - it will reset the IP and listeners you have configured, along with the network information associated. You are presented the warning message from the CLI:
WARNING: The system setup wizard will completely delete any existing 'listeners' and all associated settings including the 'Host Access Table'
- mail operations may be interrupted.
</warning>
The features themselves are still present and licensed, and should not change. During the setup wizard prompts - you are asked if you want to use and enable the features - such as Anti-Spam, Anti-Virus:
Do you want to use Anti-Spam scanning in the default Incoming Mail policy? [Y]>
Would you like to enable the Spam Quarantine? [Y]>
1. IronPort Anti-Spam
2. Intelligent Multi-Scan
3. Cloudmark Service Provider Edition
Enter the number of the Anti-Spam engine you would like to use on the default Incoming Mail policy.
[]> 1
IronPort selected for DEFAULT policy
Do you want to use Anti-Virus scanning in the default Incoming and Outgoing Mail policies? [Y]>
1. McAfee Anti-Virus
2. Sophos Anti-Virus
Enter the number of the Anti-Virus engine you would like to use on the default Incoming and Outgoing Mail policies.
[]> 2
Sophos selected for DEFAULT policy
Do you want to use Anti-Malware scanning in the default Incoming Mail policies? [Y]>
Advanced Malware Protection selected for DEFAULT policy
Do you want to enable Outbreak Filters? [Y]>
Outbreak Filters enabled.
Allow the sharing of limited data with SenderBase? [Y]>
You have successfully configured Outbreak Filters and SenderBase.
</setup>
Usually, it is just simpler if you are re-IPing the ESA from a temporary IP to permanent IP to just change the information associated via ifconfig and modify the interface as needed, or on the GUI use Network > IP Interfaces.
-Robert

Managed System Setup Wizard Status " ? " SPS 15

Dear All,
I have a problem with my SMD.
I have already upgrade the Solution Manager 4.0 from SPS 13 to SPS 15.
I want to setup E2E Root Cause Analysis for CRM system.
So I configured SMSY since I didn't configure SLD yet.
I've already installed SMD Agent in managed system successfully also.
When I run the Diagnostics Setup -> Managed System -> Setup WIzard,
in the Setup Parameter Step , it said that " No SMD Agent is currently available (ie not assigned). Please install an agent for jktgrhxsapc1 or unassign an existing agent in Agent Administration Why is that so ?
In the Agent Administration ( DIagnostics Administration -> Managed SYstem -> Agent Administration) found that the agent is online.
Second, In managed system setup wizard - System Selection Step, there's an unknown system with SID '???' and the status said that 'Some SMD Agent Runnning on host not belonging any successfully published solution' . Where can we find the log if we have an error when publishing solution ?
Thanks in advance,
Adhi

Hi Labinot,
I have checked the agent log looks like no error,
id loaded TTL refType
applications:com.sap.smd.agent.application.global.configuration true 0 strong
applications:com.sap.smd.agent.application.tracing true 0 strong
applications:com.sap.smd.agent.application.wilyhost true 0 strong
applications:com.sap.smd.agent.application.flightrecorderdumpscan true 0 strong
applications:com.sap.smd.agent.application.telnet true 0 strong
applications:com.sap.smd.agent.application.filesystem true 0 strong
applications:com.sap.smd.agent.application.logviewer true 0 strong
applications:com.sap.smd.agent.application.remotesetup true 0 strong
applications:com.sap.smd.agent.application.database true 0 strong
applications:com.sap.smd.agent.application.datacollector true 0 strong
applications:com.sap.smd.agent.application.runtime true 0 strong
applications:com.sap.smd.agent.application.connectors true 0 strong
applications:com.sap.smd.agent.application.wily true 0 strong
Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Registration done.
Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Agent ready.
Apr 10, 2008 7:27:25 PM [Thread[Thread-37,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
Apr 10, 2008 7:27:26 PM [Thread[Thread-34,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
any other idea?
-Adhi-

Runtime systems setup

Hello,
Whether NWDI with runtime systems setup is loosely coupled or tightly coupled ?
Thanks,
Sowmya

Hi,
please refer this link
https://www.sdn.sap.com//irj/sdn/go/portal/prtroot/docs/library/uuid/909eefbe-b8ad-2a10-53b9-d489ec96bc70
Regards
Manohar....

How can you redo initial system setup macbook pro

How can you redo initial system setup macbook pro?

Like when Setup Assistant fires up and lets you migrate? In general, that would imply having to do a complete reinstall. And I've always been under the impression that when you do that, the reinstall software does not contain all the extra goodies that come with a new from-factory install (such as iLife).
But as Prof. Kappy wants to know, the specifics are very version dependent.

Error during Managed system setup "Wilyhost Agent" type

Hello All,
Managed system setup finished with one error. Iam using this for selfmonitoring (solman itself as managed system)
Error msg as follows.
0 Wilyhost Agent(s) from host inbbssun02 are connected to the EM.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (TDCTBI.india.tcs.com:6001) no Wilyhost Agent was detected from host inbbssun02. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
I checked jvm_SMDAgent.out. and log as follows.
/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Introscope Agent Release 8.0.2.0 (Build 470970)
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.4.2_20-rev" from S
un Microsystems Inc.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Trying to load agent profile based on system property "com.wily.introscope.ag
entProfile"
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Trying to load file from /usr/sap/SMD/J98/SMDAgent/applications.config/com.sa
p.smd.agent.application.wilyhost/IntroscopeSapAgent.profile
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Loaded file from /usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.ag
ent.application.wilyhost/IntroscopeSapAgent.profile
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging is turned off
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.heartbeatInterval i
s set to 1800
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.dataChunk is set to
500
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Agent Metric Aging: property introscope.agent.metricAging.numberTimeslices is
set to 3000
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Looking for agent profile property "introscope.agent.extensions.directory" to
locate the extensions directory.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] The agent extensions directory /usr/sap/SMD/J98/SMDAgent/applications.config/
com.sap.smd.agent.application.wilyhost/ext was successfully located
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Introscope Agent startup complete.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] The Agent will attempt to determine its name.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Using the Agent name "SAP HostAgent J98" based on the value of the System Pro
perty "com.wily.introscope.agent.agentName".
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent] Initial agent name set to SAP HostAgent J98
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent.Isengard] Initiating connection attempts to the Introscope Enterprise Manager.
1/06/10 02:55:29 PM IST [INFO] [IntroscopeAgent.Isengard] The Agent reconnection delay is set to 15 second(s).
1/06/10 02:55:30 PM IST [INFO] [IntroscopeAgent] Started Error Reporting service
[p4://inbbssun02:50004] Agent ready.
1/06/10 02:55:34 PM IST [INFO] [IntroscopeAgent.IsengardServerConnectionManager] Connected Agent to the Introscope Enterprise
Manager at TDCTBI.india.tcs.com:6001,com.wily.isengard.postofficehub.link.net.DefaultSocketFactory. Host = "inbbssun02", Proce
ss = "SAP HostAgent Process", Agent Name = "SAP HostAgent J98".
Is there any seperate setting for wilyhost agent connection to EM ?
Regards,
Shyam

I have restarted the agent at OS level and it appears in the Agent Admin page.
I then re-ran the Managed System Config for this system and receive the same error.
I have looked at the jvm_smdagent.out file on the wilyhost and found the following errors
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] Looking for agent profile property "introscope.agent.extensions.directory" to locate the extensions directory.
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] The agent extension property "introscope.agent.extensions.directory" is not set. No extensions will be loaded.
1/11/10 05:37:02 AM CET [INFO] [IntroscopeAgent] Introscope Agent startup complete.
1/19/10 12:34:08 PM CET [WARN] [IntroscopeAgent.IsengardServerConnectionManager] The Introscope Agent is sending data to the Introscope Enterprise Manager too slowly. Keeping the connection alive.
The agent on the solution manager box is version 7.0 and the version od the agent on the PI box is 7.11
Regards
Stephen

Solution Manage Diagnostics - error in the system setup

Hello,
I have installed SMD and I installed one system with the Setup Wizard of the SMD. According to the result of the setup, it was successful.
However, when I do a self check in SMD, I get the five following errors in the Monitored Setup node :
5 error(s) found:
No DB agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No JVM startup parameters setting status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Roles assignment status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No SSO Setup status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Telnet agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
Can anybody help me ?
Thank you

If you goto http://server:port/smd >>> Diagnostic Setup >>> Diagnostic System >>> Setup Wizard, do you have a message similar to:
Last Diagnostics setup wizard execution on Tue Oct 09 13:34:44 2007 :
- 0 setup steps disabled by user
- 13 setup steps succesfully executed
- 0 setup steps executed with warnings
- 0 setup steps in error
If you do, your Diagnostic server is correctly setup.
For Managed system, same thing, http://server:port/smd >>> Diagnostic Setup >>> Managed Systems >>> Setup Wizard, or check setup results to make sure it's completed.

Aperture system ID - recovering the old serial number

hi
apologies if this was asked again but several searches later im still confused.com
i recently had my old MBP stolen - however before this happened, i backed the whole drive to an external disk
i cant find my aperture installation cd, so i downloaded a Trial Version of Aperture and used a trial serial number
i then decided to use what some people here suggested and copy my OLD aperture system ID file to my new library/application support/proapps folder (and delete the trial version of the file with the trial serial number)
however, aperture wont recognise my old serial number
any thoughts on what i should do
is there a way to read the old serial number from the aperture system id file? its all messy
thnx

Hi Adam,
I've searched my Mac for "ProAppsSystemID" and the search returns no items. Would you know how to locate it? Also, where is "/temp"?
Every time we fire it up, it asks for the latest serial number... and then for the previous "upgrade" serial numbers

Aperture system setups?

Similar Messages

Maybe you are looking for