Aperture to Photoshop: how to avoid multiple versions

I used to be able to go from Aperture 2 to Photoshop CS4 multiple times without getting a new version each time. The trick was to unstack the new version that was created the first time after going to PS CS4.
After I had to recover my full system, Aperture creates new versions after each round to PS CS4.
How can I avoid Aperture creating a new version each time I go to PS CS4?

Some things to try - are you sure the create new version is not checked? Does this happen on old PSD's that used to open vs. create a new one? Are you sure that you have not applied Aperture adjustments to the PSD accidentally? If all else fails try referencing the file (move master) on just that file then try it again.
RB

Similar Messages

How to avoide multiple duplicate entries in adress book?

How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

How to avoid multiple copies of data in page refresh

How to avoid multiple copies of data in page refresh

If you are talking about a page with an insert query, ignore the fact that it's a page refresh. It's just another way that someone can insert duplicate records. I like to handle this in my insert query.
insert into thetable
(f1, f2, etc)
select distinct
value1, value2, etc
from some_small_table
where you don't already have that record

How to avoid multiple listing for same artist?

How to avoid multiple listing for same artist?

Sounds like there might be blanks in the artist name.
For instance "Lou Reed" and "Lou Reed_" will not match.
(Pretend the underscore _ is a blank).
Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

How to avoid multiple votings?

Hello All. How can I avoid, that there are multiple votings from one person?

I think there is no option to avoid multiple votings. Adobe has not implemented this funktion.
Formstack is as alternative to Formcentral. The Fieldoption there is called - Unique.
Unique allows you to restrict submissions of the same value in this field. For example, you can allow only one submission for a particular email address or physical address.
That is the option i was looking too.
Formcentral is useless for me in this way.

How to avoid multiple LOGIN with same user in database.

Hi All,
Using database triggers how to control multiple logins of a pertiuclar user.
thanks in advance

Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
alter system set RESOURCE_LIMIT = true;
Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

How to avoid multiple users to access same tcode

Hi all,
Am creating one z tcode to display the material details for the particular reservation number. How can I avoid multiple users to access the same tcode simultaneously. If anybody works over that tcode then no other user should be able to access the same tcode until or unless the first user works over it.
Regards,
Ramya

HI,
you can even use import and export logic and check if user has entered the transaction ..
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha

How to avoid multiple if else using design patterns.

Hi,
Which design patterns is used to avoid lot of if else in our code . Say for example if the user press 1 the out put should be one, if he press 2 it should be two like this upto 10. So we need to include lot of if-else part. How to avoid the multiple if else using design patter for this scenario. I can't find the solution for this problem can you guys help me?.

I'm too lazy to read a whole text book, but the first google link provides a code sample which made me laugh.
http://www.refactoring.com/catalog/replaceConditionalWithPolymorphism.html
double getSpeed() {
    switch (_type) {
      case EUROPEAN:
        return getBaseSpeed();
      case AFRICAN:
        return getBaseSpeed() - getLoadFactor() * _numberOfCoconuts;
      case NORWEGIAN_BLUE:
        return (_isNailed) ? 0 : getBaseSpeed(_voltage);
    throw new RuntimeException ("Should be unreachable");
}My implementation of The Bridge Over The Parrot Shop
package forums;
import java.util.Random;
abstract class Bird {
private static final Random random = new Random();
abstract double getAirSpeed();
public double getBaseSpeed() {
    return randomDouble(18.96);
protected static double randomDouble(double max) {
    return random.nextDouble() * max;
protected static int randomInt(int max) {
    return random.nextInt(max);
class EuropeanSwallow extends Bird {
double getAirSpeed() {
    return getBaseSpeed();
class AfricanSwallow extends Bird {
private int _numberOfCoconuts;
public AfricanSwallow() {
    this(randomInt(4));
public AfricanSwallow(int numberOfCoconuts) {
    _numberOfCoconuts = numberOfCoconuts;
double getAirSpeed() {
    return getBaseSpeed() - getLoadFactor() * _numberOfCoconuts;
public double getLoadFactor() {
    return randomDouble(3.12);
class NorwegianBlue extends Bird {
private boolean _isNailed;
private double _voltage;
public NorwegianBlue() {
    this(randomInt(10)<2, randomDouble(12.0));
public NorwegianBlue(boolean isNailed, double voltage) {
    _isNailed = isNailed;
    _voltage = voltage;
double getAirSpeed() {
    return _isNailed ? 0 : getBaseSpeed(_voltage);
double getBaseSpeed(double voltage) {
    return getBaseSpeed() * (1+(voltage/Math.PI));
public class AirSpeedTest
public static void main(String[] args)
    System.out.println("EUROPEAN: "+new EuropeanSwallow().getAirSpeed());
    System.out.println("AFRICAN: "+new AfricanSwallow().getAirSpeed());
    System.out.println("NORWEGIAN_BLUE: "+new NorwegianBlue().getAirSpeed());
}... and the requisite background for the uninitiated [NORWEGIAN_BLUE|http://www.youtube.com/watch?v=4vuW6tQ0218] and [EUROPEAN v AFRICAN|http://www.youtube.com/watch?v=4b4bGAoVR7g].
You have to know these things when you're a King you know.
Cheers. Keith.

How to avoid multiple password prompt for intarnet portal

we have developed a intranet portal in Share Point 2013 with multiple site collection. when accessing through IE, Chrome, we can do settings to avoid multiple password prompt by adding the domain name of site in Trusted sites. How we can achieve the same in Safari while accessing through MAC or IPAD

first time when you call the BSP application from the browser (or by double clicking the BSP_APPLICATION link from SAP GUI) you need to pass user credentials. For further windows this will not be required as browser will remember your info.
if you need to <b>somehow</b> avoid this then the only option is to hard code the user id and password in the service in transaction SICF or by passing the same via URL.
Another option is that if you port this application in a SAP portal environment, SSO can be used .
Hope this helps.
Regards
Raja

Query: how to avoid multiple POs from being combined into delivery

Hi all,
We are working on an enhancement.
The requirement is:
We need to avoid multiple POs from being combined into one delivery.
Any pointers in this regard would be highly appreciated.
regards
Gurpreet

Hi Murali,
I think your suggestion should solve Gurpreets problem.
I have a query here.
In the copy controls VLTA, defines between sales doc to dlivery doc.
Here we want to maintain copy control between purchasing doc to delivery doc.
How do we achive this?
Also in my view we should write a new combination requirement.
Please check if combination requirement 51 can be used?
Regards
Abhishek

How to avoid multiple DataConnections with LCD ES2

Hi, we are just starting using the data connections to connect via a database with LiveCycle Designer. It seems we are missing something important regarding to manipulation of data from the PDF.
At first we have tried to apply a INSERT command to our first table and be able to browse through the items in the database. We are able to browse through the database only before we have inserted something.
If we insert an item and then try to browse through the database with (Next, Previous, Last or First) it will crash and have an error of the following :
(Next, Previous, Last or First) failed. Multiple-step operation generated errors. check each status value [ID:@11]
So then we have decided to create a second data connection which would have each of the column in the database except for the ID which appears to make everything crash.
E.G.: Table_1
DataConnection1 --> ID, Field1, Field2, Field3, Field4 SELECT Command connection
DataConnection2 --> Field1, Field2, Field3, Field4 INSERT Command connection
Seems like we can't have a SELECT and INSERT in the same DataConnection because with those 2 different connections it works fine....
Then we are trying to show multiple data's in a table which is linked with the ID of the Selected ID in DataConnection1.. To show the data is all fine using a 3rd connection for that Table_2, then we are making sure a blank row is always there at the end of the table to be able to add this new entry to the database with a Add button to INSERT into the Table_2... Unfortunately we do not have a 2nd connection to that table because we cannot link those fields with the database for the purpose of a multiple entry view.
We have tried to make a 2nd connection for the purpose of the INSERT but it doesnt work at all.
We are basing ourselves on the sample provided by Stefan Cameron in his blog http://forms.stefcameron.com/2006/12/18/databases-inserting-updating-and-deleting-records/
I am wondering if we are using the right functionalities and if it is the simplest way to work with databases...
If anyone can help, it would be greatly appreciated!!
Thanks in advance!
Mag

Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
alter system set RESOURCE_LIMIT = true;
Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

How to manage multiple version of PLSQL application in database?

Hi all,
What are the recommended approaches for managing multiple version of plsql program in a single database?
We can't afford to have different db instance for different version due to server resource.
We need to keep different version so that easier to support our users who are using different version of our application.
Please advise.
Regards,
Jap.

Hi Guido,
Yes, I thought of that as well. If really so, then schema name will have to be different.
Anyway, just exploring if there's any other possibilities.
Regards,
Jap.

Jumpstart/JET - How to maintain multiple versions of patch clusters

Is there a way to maintain multiple versions of the recommended patch cluster with JET? Since Sun uses the same filename (10_recommended.zip) but releases several versions over time, its hard to keep new systems at the same baselines as ones built previously. So when I download a patch bundle I always rename it to the date downloaded (ie 10_Recommened_10SEPT2010.zip) Is there a way to integrate this into JET?
Thx,

when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
find more details here
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
good luck
Amr

How to avoid multiple call to function:

In our datawarehouse we have a huge receipt row table where all metrics ar stored in the local currency. On top over that we have views which calculate metrics to the desired currency.
So basically all views looks like this
select geo_region,
product_group,
customer_group,
metric1 * (select get_exchange_rate(currency_id) from dual) metric1,
metric1 * (select get_exchange_rate(currency_id) from dual) metric2,
metric1 * (select get_exchange_rate(currency_id) from dual) metricx,
group by..
As we have about 20 metrics we notices that the function is called 20 times per row.
Is there really anyway to avoid that? Shouldn't it be it's just the exact same call with the same in-parameters over and over again.
We've tried with local sys_context and the performance is better but the call to the context is still performed 20 times. Any Ideas?

Can you avoid multiple function calls? Maybe, if as in your example all the function calls values are computing the same result. If they operate on different columns then you'll have to perform the function call anyway.
Either way you should be able to eliminate the (near as I can tell) pointless subquery from dual
You might be able to avoid the repeated function calls if the values are always the same. If every computation you could save the function call (and subquery!) by doing it once and then using assignments after the initial query using variables after the initial query, perhaps using NULL in the query as placeholders to select into a record - something like
select inital_region,
         product_group,
         customer_group,
         metric1 * exchange_rate(currency_id) metric1,
         null metric2,
v_metric2 := metric1;
...Message was edited by (fixed typo):
riedelme

How to avoid multiple selection in ALV tree control?

Hi,
Experts,
I want to avoid multiple selections on Alv tree control after pressing control keyboard button(Ctrl). Even by pressing Ctrl keyword button i want to select only one row of a Alv tree control.i have used cl_salv_tree class for it is there any method to achieve this please pass some code/idea on it.
Thanks in advance,
Shabeer ahmed.

I haven't tried it before but it should help.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01]

Aperture to Photoshop: how to avoid multiple versions

Similar Messages

Maybe you are looking for