Aperture update is installed yet it say an update is available
I updated to Moutain Lion. I updated Aperture to ver 3.4.1. Under app store updates it says an update is available with a red 1. Its for aperture. Yet when it brings updates available. Aperture is grayed out and says installed. But I still have the red 1 for it. Ive tried recycling the operating system. Bringing up aperture and confirming version. Im at a loss... I still have the red1 for an update for it... it shows up as grayed out and installed under purchased
Under app store purchases It says "Download" for mountain lion yet im already downloaded, nstalled and running 10.8.2...
Hi. Figured I'd get back to the folks here. My problem was fixed but resolution was highly complicated. Required speaking to backend engineering and them walking me through a fix. I evidently was the first to report this issue. Anyway, they can fix it but it requires uninstalling application, deleting files etc... then reinstalling... Wish I could be clearer but they tried a number of things...over a number of days...until figuring it out....
My suggestion is to call them... Mountain Lion Integration Issue with Aperture and App Store.... Good Luck!
Similar Messages
-
I have Aperture 3 iinstalled and have used it for quite a while. Now when I try to open it a licensing window appears and wants the reg #. I copy it from the program on another comupter, yet it says that it's invalid. Any ideas?
Check this support article:
Troubleshooting Professional Application Serial Numbers:
http://support.apple.com/kb/TS2005
Sometimes look-alike characters may be confused, also you may need to enter the previous registration numbers as well, if your Aperture version is an upgrade to Aperture 2 or 1.
Regards
Léonie -
I Installed Aperture update today and Aperture will not open.
I am running OSX 10.8.2 and installed a new Aperture update today. Now when I try to open it says my libraray has to be modified.. I modified my current libraray and now when I attempt to open Aperture it crashes and lets me send a report to Apple but will not open up... I also updated iPhoto at the same time and it to says I must modify my library to run this update...I don't care about iPhoto at the moment... I am a serious photographer and want to get to my photos in Aperture and am unable to open it... Any one out there that can help me..?
There are so many threads here which contain the solution. Have a read :-)
-
I am trying to open a recent document in Pages. It says I need a newer version of pages to open document. When I go to install pages it says I already have on this computer and to check software updates. There are no updates showing. Now what?? I can't open any of my documents.
you need a newer version of pages to open this document
-
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
I have problems in the Safari browser , and I have deleted the program using the "Clean My Mac" App and now I can not install it , he say " This update requires mac ox 10.6 "
I would like to install the Safari browser on my system Lion os x 10.7.1 …..Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.
Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W. -
I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?
You cannot stop it from popping up.
it will continue every few minutes until its installed.
just keep using the back button near right side of home button. -
Ap Store shows update for DropCopy and lists it as installed yet it will not clear the updates page in my account. How do I clear this?
I tried the debug mode in mac app store too >> Fail.
The first time I feel disapointing from apple software. -
I installed latest Aperture updates, and then downloaded photos and built new slideshow in Projects. Went to burn DVD, but iDVD will not read the new slideshow. Any ideas?
Without know how you exported the slideshow from Aperture and how you are using iDVD and what errors or messages you are getting then no, haven't a clue.
-
A recent update download upset my entire itunes program. Unable to use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, Error 7 (windows error 1114) etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have CS6 master collection. After update from Windows7 it didn't work. When I try to install again, it says the serial number is invalid. What to do?
Please refer to the steps in Re: cs6 serial suddenly invalid.
It should help you.
Regards
Rajshree -
i install the iPhoto updater, launch iPhoto after it is installed, and it says to install the iPhoto updater. What should i do?
You have to install and RUN the iPhoto Library updater - it is installed in the utilities folder of your applications folder - double click on it to RUN it and then launch iPhoto to complete the upgrade
LN -
Aperture update refusing to install
Although i have Aperture 3.3 installed the update to 3.3.2 refuses to install with message "Aperture 3.0 or later is required to install this update." This is the reason what App Store ist not listing Aperture when an update is available.
What could i do to overcome this?MacBook Pro, Mac OS X (10.5.6)
that cannot be your system, if you are using Aperture 3.3?
Have you moved Aperture from the Applications folder to a subfolder or renamed it? To install the update, aperture must be named simply "Aperture", without any additions and located in the Applications folder on your System volume.
Regards
Léonie -
Missing effects installed yet not updating
I opened a project that uses effects that were missing from my system and received the red screen alert. I downloaded and installed the effects and they now appear in the effects menu in FCPX, yet FCPX is still telling me the 6 effects are missing. How do you fix this so that the effects update and apply?
They should just apply once they have been installed yet they do not. One of the effects did update when I installed it but there are 6 instances that will not.
The effects are: Alex4d Mask+4, Alex4d Mask+8 and Alex4d Mask+16. See the screengrab below showing the installed effects and also the missing effects alert for those same effects.When you add or update an effect, title, transition etc in the effects browser, FCP will sometimes not see it until you close and reopen FCP. Even if it sees the additional effect it will not apply it to an instances in the project timeline. You have to reapply it. One would think in your case where the effect was missing it would automatically add it once it appeared in the browser but perhaps not. I would relaunch FCP and see if that fixes it. If not then You will need to reapply the masks.
Maybe you are looking for
-
One image for multiple Intel Macs
I am trying to find some reference to creating one universal NetInstall image so that older Intel based portable Macs will work with newer portable Macs. In the past we've been using a 10.5 retail image and update it as Apple updates come out. Howeve
-
Outlook Calender and iphone sync not working properly (windows 7 os)
I try to sync through itunes and contacts work fine, but the calender only comes through partially. Single events work fine, but events (on outlook) which extend more than a day are completely ignored by itunes sync and don't show up on the iphone ca
-
Motion project length for FCPX effects templates.
When creating a Motion Effect Template for FCPX, is there a recommend project length? Is shorter better since the effect will change based on the clip length in FCPX? Or does it really matter as long as it is long enough to cover all included behavi
-
Why couldn't I get the contents of the a file ?
I have a txt file,I want to disply it,but all can I get is chaos.I change the file from ANSI to Unicode,It didn't work too. why? by the way,I add a "'# " at the tail of the file; how can I get the correct content of the file, the code is: try{ FileIn
-
Serious iTunes error on launch
I have Installed itune and ran into a error when trying to launch. I think its my fault party because before i installed i had a older version of itunes+quicktimes installing on my pc from a cd, when i relized that i stoped the install.. anyway heres