Aperture Vault - cannot restore Aperture 2 vault with Aperture 3

Hi
I have a vault I created last year on Aperture 2 located on an external hard drive. I tried to restore the vault using Aperture 3 and it prompted me to upgrade the restored library, which I did. Nothing shows up in the library in Aperture. There is 150M of disk space used on the external drive, so I know there is data there. Any ideas?

But Aperture 3.3 requires version 10.7 (ML) or later, thus do I need to upgrade into ML or are there other options?
To be able to upgrade to Aperture 3.3 or later you need to upgrade to Mac OS X 10.7.5 (Lion) or Mac OS X 10.8.x (Mt. Lion). Upgrades from the AppStore will give you Mt. Lion or Aperture 3.4.2 right now.
I do not know how to find free plug-ins for Aperture 3.2.x, perhaps you can achieve the effects that you want with external editors?
If you decide to upgrade the OS and Aperture take some precautions:
Check all other programs and device drivers that you rely on, if they are compatible with Mac OS X 10.7 or later, or if you can get upgrades. No Power PC program will run any longer, they are not supported on Lion or later. Most of my device drivers could no longer be used, and for some programs I had to buy new versions. You can get a complete list of the installed software and the versions from the "About this Mac" panel from the Apple menu or the System Profiler.
Make a backup and if possible a bootable clone of your system as it is now, just in case you want to revert to the older system. Otherwise it will be nearly impossible to downgrade again.
Also, in rare cases the upgrade of the Aperture library to version 3.3. caused problems. While still running Aperture 3.2.4 make sure your Aperture Library is in perfectly working condition by running all three "First Aid" options: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Good Luck
Léonie

Similar Messages

Cannot restore because lost contact with ipod update server host

Hi. Yesterday i tried to restore my ipod because my brother accidentally put it in restore mode, but when im trying to restore it itunes says i cant contact with the host server of updates for ipod. i tried it all i checked the firewall, disabled security system, and im still not being able to restore. i need help please

Maybe this?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Could be an Apple problem to since others have received that message today

Cannot restore new hard drive with restore disc

I have a Toshiba L755 with Windows 7 Home Edition 64 bit with a 640 GB hard drive. I had a hard drive failure and had to replace the hard drive. I replaced the hard drive and went to use the restore discs to reinstall my OS and all of my Toshiba application and it will not complete the setup. I have 4 discs and after each disc it says to put in the next disc. I do this and when the 4th disc completes it continues to ask for another disc. I went the install process of the discs 6 times but it did no good. I ordered a second set of restore disc from Toshiba but I am still having the same issue. Can someone help me. I don't know what to do. It will allow me to install a copy of Windows 7 Home Edition and use the key on bottom of laptop but then I cannot get my original Toshiba apps back. I want to restore laptop to out of the box.

Hi! See my reply here
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Bad-Recovery-Media/td-p/445691
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

HT201263 I cannot restore iPhone 3GS with iTunes

I cannot restore my iPhone 3GS with iTunes. I am using Windows 7. Can anyone help me. I wont even boot. I previously jailbroke it. So i need help. I try restore. iPhone cannot restore. I try .ipsw file. Cannot restore because the firmware file is corrupted.

Jailbreaking your phone not only voids any warranty with Apple, but also forfeits your ability to receive any assistance, including from this forum.
Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll have to search elsewhere on the internet for assistance. I know, why don't you start with the lovely people who helped you jailbreak your phone to begin with?

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

How to restore a single Photo with time machine in Aperture 3 / iphoto?

How to restore a single Photo with time machine in Aperture 3 / iphoto?

Its been awhile since I used iPhoto, but I have done it.
If I recall correctly this is how.
In iPhoto open event that you need to restore the photo to ( the event that originally contained it )
Then open TM it should show that same event and then go back in time until you find the missing shot
Highlight the one you need to restore and tell TM to restore it.
Good luck

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

I cannot download the IOS 5 with Itunes to update my iphone 4. I dont want to restore the iphone because I am afraid that the itunes cannot download the ios 5 and then I will be with no iphone.

I cannot download the IOS 5 with Itunes. Always appear this message ( err= -3259) what can I do to solve this problem?

It's a connection timeout error. Google for a copy of iOS 5.0.1 and download it to your computer. Prepare to restore your iPhone but hold down Option (Mac) or Shift (Windows) when clicking Restore to bring up an explorer where you can manually install iOS 5.0.1 on your device, since you do not require a full download from the Apple Servers other than to verify your iOS build being installed.

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Help: Windows cannot restore a system image to a computer with different firmware

I want to recover a complete image of a Windows 7 operating system I have backed up to my other server. But I am getting the error "Windows cannot restore a system image to a computer with different firmware. The System Image was created by a computer using BIOS and this computer is using EFI"
The image was definitely taken from this machine - the firmware has not changed!
What do I need to do to restore the image?
Background Story ..
I bought a new HP 255 laptop per-installed with Windows 7 without Operating Systems instal disks (I will NEVER be stupid enough to do that again!).
I took a complete image of the systems, as suggested so that I was well backed up.
However, my machine corrupted its operating systems with a few weeks. The boot recovery CD did not work (would not boot). So in desperation, and because time was short I went out and bought another, legitimate copy of Windows 7 DVD with a license key (So now I have 2, legitimate copies of the operating system!).
I installed the new copy of Windows 7 - but it was dreadful, because many drivers were missing. Mostly the missing drivers were not available on the HP support site for this machine. ALso, boot up was increadibly slow compared to the original OS installation.
So I created a new boot recovery disk from the new version of Windows, and tried to restore using that. New boot disk loads ok, I can find the old image on my network (after loading a few network drivers). But I won't instal the image - giving the above error message.
I tried deleting the EFI partition from the disk (using GPARTED to reformat that partition). That killed the Windows 7 on the machine - but still gives the same error message when I try to re-image the machine.
I have tried going into the BIOS settings .. HP 255 has a "Legacy Mode" - which I have enabled, but this makes no difference at all!
I think that the kind of solutions I am looking for might be:
1. There is a clever way of disabling EFI on my 255 so that it looks like a legacy BIOS machine, or
2. This EFI this is wired into my new boot recovery disk - and there is a way of creating a boot recovery disk that does not use EFI
This has taken me about 2 weeks so far,please help with any suggestions!

DonOxley wrote:
Erico,
I suspect that "MSDOS" is what the Gparted tool calls "MBR" for a partition table, as explained here:
http://superuser.com/questions/700770/mbr-equals-msdos-for-gparted
I think that you are suggesting I give up on trying to recover the image I have stored on my server and just to instal Windows 7 from my new copy. There are two problems with this.
1. After having systematically downloaded all of the drivers from the HP 255 notebook support page, I am still seeing missing drivers listed. Install the AMD graphics softpaq driver first. It also contains the chipset drivers.
2. The machine is taking a hugely long time to boot up, and seems much slower with this version. Maybe that is a product of using "EFI" rather than "bios" - I don't know.
My assumption is that HP had some special set-up option with their version of Windows which makes the machine more performant. It does not seem to be a coincidence that the image they deliver the machine with is not quite compatible with a 'normal' Windows 7 instal.
So my original question stands: How do I recover the image that I saved away (as per instructed) when I first bough the machine?
You still have not said what you used to create the system image. What is the "image" file's extension?
You are mistaken in your comparison. MSDOS is an operating sytem MBR is a partitioning scheme. that is comparing apples to oranges.
The article is making an oblique reference in that using GPARTED is more or less equated to using the diskpart utility at the command line. Everything done at the comand line is essentially done by use of MSDOS commands. GPARTED does the same thing with LINUX commands via a graphical interface so you don't have to type in the commands in a Linux console.
Do you mean making a backup? a backup is not a clone which can be reproduced on different hardware. The SSD disk replacement does make the hardware differ from the original configuration.
Follow the instaructions on the following tutorial to make your disk a GPT type before installing.
http://www.disk-partition.com/articles/mbr-partition-table-to-gpt.html
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to create and use Data Vault with HTML/JavaScript (SAPUI5) for Mobile Apps?

Hello,
I am creating a demo Enterprise Mobile App, for cross platform and I want to use the Data Vault.
I am not able to figure out how to implement the Data Vault with HTML/JavaScript i.e. SAPUI5 for cross platform mobile apps I have a tutorial, but it is for Android based apps. Where as I want it for iOS as well. I guess, in this case, implementing the Data Vault using SAPUI5 over HTML and JavaScript would be better.
If anyone has any links or sample code to implement Data vault in HTML/JavaScript (SAPUI5) or specific for iOS apps, it would be great.
Thank you.

Hi,
This is the "SAP Mobile Documents" community, so this seems to be the wrong place for asking your question related to Data Vault / SAPUI5.
Maybe you should post your question here: http://scn.sap.com/community/developer-center/front-end.
best regards,
Ingo

IPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?

I tried to update to IOS 4.3.4 today but now my iPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?
(With the old discussion groups it was easy to see where other people had similar problems, these new groups seems clunky in comparison)

OK, fixed it by using SHIFT+RESTORE to load the iPad1,1_4.3.4_8K2_Restore.ipsw file in directly from the
C:\Documents and Settings\<user name>\Application Data\Apple Computer\iTunes\iPad Software Updates
folder.
No idea why the upgrade to 4.3.3 failed in the first place and no idea why iTunes was not clever enough to just do it by itself when it detected that there was a problem in the first place.

HT201210 Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate

Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...

Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

TS1372 Cannot restore or update in iTunes with error 1437

Cannot restore or update in iTunes with error 1437

More info needed
Which version of iTunes are you using?
What is your iPod software version as shown on the iTunes Summary page?
Error 143x, normally caused by harddisk write timeout, probably due to
iPod Hardisk failing - Do the iPod Disk Diagnostic refer to this earlier tt2 post
Slow USB port, low datarate, due to sharing with other USB devices - Disconnect all other USB devices while Restoring or syncing. Dont use any USB hub and also use the USB port at the back of the PC. and not the front.
CPU Resource drained by other Apps like email, Antivirus, web broswer - Stop them, but if stopping Antivirus please disconnect the PC from the Inernet first.
Have a nice day!

Why I cannot open a restored domain.sites2 file with iweb?? Message: "

Why I cannot open a restored domain.sites2 file with iweb?? Message: "domain.sites2 couldn't be opend"

Please supply screen shot when it is asking for updates. (Do not send as email, use CAMERA icon). This is important, there are many fake updates.

HT4061 i updated iphone 4 with the software update ios7. i cannot get phone to restore i am stuck with a black screen or a screen with the apple ico that disapears and then the icon of itunes and the usb icon. Itunes is not picking up my phone to even re

cannot restore phone since update. I tried to upload to itunes but itunes isnt picking it up. Phone is frozen with Itunes icon and the usb cord. I tried some suggestions posted but it is still not restoring does anyone know how this can be fixed???
Thanks

Hello reneywacky,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

Aperture Vault - cannot restore Aperture 2 vault with Aperture 3

Similar Messages

Maybe you are looking for