Aperture Won't Launch With 2 Video Cards

I use 3 monitors with my G5 Dual 2.5GHz for running a number of programs simultaneously and also for Final Cut Pro editing. In the center is an Apple 23" HD Cinema Display. On the left is an Apple 15" DVI flat screen and on the right is an Apple 15" VGA flat screen.
Aperture will not launch at all. It gives me an error stating that the video card is not supported. The main card is a GeForce 6800 GT DDR that has the 23" and the 15" DVI connected. The problem is the Radeon 7000 that has the 15" VGA hooked up. I took the Radeon out and Aperture ran fine so I know where the problem lies.
Obviously I cannot keep taking the Radeon in an out of the G5 whenever I want to use different programs. Does anyone have any suggestions? I hope Apple will have an update where you can tell Aperture what monitors to use or video card to ignore. That should alleviate the problem. Is there a way of using Terminal to turn off the Radeon which would allow Aperture to run? I just bought this program and was all excited to start using it. Now I'm bummed. Any help is greatly appreciated.
Thanks,
Power Mac G5 Dual 2.5GHz Mac OS X (10.4.7)

Maybe there is a way to turn the Radeon 7000 on and off through Terminal? Some process I can quit to run Aperture on the 2 monitors connected to the nVidia GeForce 6800GT and then restart that process when I'm done so I can go back to using 3 monitors?
Thanks.
Power Mac G5 Dual 2.5GHz Mac OS X (10.4.7)

Similar Messages

Aperture won't launch on 15" Retina MBP

I recently moved to a Retina 15" MacbookPro. Installed Aperture (app store), and it worked fine with Lion. Upgraded to ML, and now Aperture won't launch. I read the thread having to do with a conflict with Final Cut Express. That's not me. No FCE (or and Final Cut apps) loaded on this machine.
I've removed all existing Aperture libraries (to force the creation of a new library on launch).
I've re-downloaded Aperture from the app store, to make sure I have a nice clean version.
It won't launch.
Anyone else out there having this problem?
I suppose I could try re-installing OSX 10.8, but that seems extreme.
Thanks in advance,
Chris

More info. Some good. Some not so.
Right-clicked iPhoto library in finder and chose Aperture as app to luanch, and Aperture opened it right up.
Tried switching to an Aperture library. Crash.
Repeated launch of iPhoto library.
Tried creating new Aperture library. Crash.
Right-clicked an Aperture library and chose Aperture as app to open, and Aperture opened it up (I think I'd tried this prior to posting, without success, but can't be 100% sure of that)
At any rate, the library I want is now open, so I should just go get some work done, but I'd appreciate any insights into what might be going on.
Thanks,
Chris

Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

Issues with games, video card issue?

Hi,
I have been having issues with games lately. Mostly they are hidden object games from Big Fish, but they start up then minimize, it doesn't crash completely just minimizes, I click on it again and it works for a few seconds and minimizes itself again and again. I am unable to play the games because it keeps minimizing. could this be an issue with my video card? I have attempted updating it but it doesn't seem to help. Any ideas?

Ok OK, Update...
the games work perfectly on my father's HP which runs windows 7...so it definatly is NOT because of not updated stuff....I really dont know what else to do at this point....no suggestions from anyone?!?!?!

Can I use a thunderbolt display with dvi video card?

Can I use a thunderbolt display with dvi video card?

Nope, you can only use it with a Thunderbolt port.

Some videos from Aperture won't sync with iPhone

All the photos from Aperture (about 14,000) sync just fine to my iPhone 4S and my iPad 2, as do 282 of the 289 videos I have in Aperture. However, there are 7 videos that will not sync; after the sync process, iTunes gives me an error message that the video couldn't be synced since they couldn't be played back on the iPhone or iPad. The videos are all 50MB or less, all in the proper .m4v format using the H.264 codec. Other videos taken with the same camera and converted using HandBrake to .m4v using H.264 sync just fine. The videos play back just fine in Aperture, QuickTime, and iTunes.
I have tried removing all photos from the phone and re-adding them. I have tried deleting the "iPod Photo Cache" folder from the Aperture library package. I have reinstalled iTunes. I even tried re-converting them in HandBrake to another .m4v file using H.264 but that wouldn't sync either. No matter what I try, these same 7 videos won't sync for some reason, even though similar videos, some from the same exact camera, converted the same exact way, sync just fine.
Anybody experiencing anything similar? More importantly, anybody have a fix or solution? Thanks in advance!

Looks like its a software issue with the latest Itunes patch. I see several people are reporting this problem on the page and yet no solutions currently exist to address it. I tried several possiblities myself with no success. The only remaining solutions I can see are to "reset" your device and try to sync all appropriate apps, music, photos, etc.. once again. Two wait for the next patch, or three to attempt a recovery from a previous back up on your computer.
I do not have the time currently to attempt the ones I can do. If anyone wishes to try and can report a success I think many of us would appreciate it.

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with nvidia video card GTX670 in PS CC

I have been using PE10, but have just installed Photoshop CC v. 13.1.2 x64. Although my video card (nvidia GTX 670, 2 gb RAM) is recognized by Photoshop, when I check "use graphics processor" under "preferences/performance" the converted RAW image is somewhat blurred at all zoom levels (except 100%) compared to when it is unchecked and sharp (for both Canon 1100D and 6D). The problem may possibly reside in the RAW conversion, because if I convert the file with "use graphics processor" unchecked, and then subsequently check it after it has been opened, the image is not blurry and I have access to all of the video card supported functions. Has anyone else experienced this problem, and found a solution? Thanks, artmar4 (intel i5-3670, 24 gb RAM, Windows 7, 64 bit).

artmar4 wrote:
I must admit it's not intuitve to me that the image would be somewhat blurred when clicking on "fit screen" and "fill screen" (but then what do I know.)
The GPU image-interpolation for display is more sophisticated than that of the CPU, but both methods cannot avoid compromising the image quality in some way in order to reduce the scale of an image. The GPU method can produce blurry results whereas the CPU method can produce ragged results.
Both methods produce very good results when the zoom is 100% divided by a power of two. However, "Fit Screen" and "Fill Screen" won't give a nice neat zoom level like that, except on very rare occasions when an image has a particular size relative to the screen.
Here's a (hideous) contrived example of the blurriness of GPU versus the raggedness of CPU. First is the image at 100% zoom. Then the doc on the left of each screenshot is being scaled by the GPU, the doc on the right by the CPU. Click the images to view without forum resampling!

Apple Multiple Scan 1705 - usable with modern video cards?

I still have an old Apple Multiple Scan 1705 display which I've been using continuously since ~1995. Even though I don't have a Mac anymore (I know, I know, mea culpa), I hooked it up to my PC and it has worked great. But, I recently received a newer hand-me-down PC from my sibling. It didn't come with a monitor, but I thought that would be OK as I could just switch the monitor from my old system to the new system.
As it turns out, it's not that easy. When I boot it up, the monitor goes blank after POST, usually between the XP screen and the welcome screen. Sometimes I can actually get as far as seeing the desktop, but the screen usually goes blank before I can navigate anywhere. It works fine in safe mode, though. From what I've read on the Web, this would appear to be an "infinite loop" problem, where the OS and the video card stop speaking to each other.
I may be on a fool's errand here, trying to combine a PC video card (an NVIDIA GeForce 7600 GS) with an Apple monitor which is ten years older than it. I've done some basic troubleshooting, such as reinstalling the video card drivers and visually inspecting the hardware and connections. But I wonder if it is even possible for the two to communicate properly. For the record, I'm running Windows XP SP3. Has anyone else been foolish enough to try this?
My girlfriend hates the bulkiness of this old CRT monitor and wants to get a flat panel anyway, but while I save up for that, it would be nice to be able to use the new computer with the old monitor. Even if it won't work, I've gotten 13 years of use out of the monitor, so I certainly got my money's worth. But I thought I'd check with the community and see if there's any life left in the old display.
Thanks for your help!

In Windows XP, in order to change the resolution for the monitor, you have to right-click on the desktop and select "Properties". This bring up "Display Properties". From there, you click the "Settings" tab. This gives you some basic options. For a wider selection of resolutions and refresh rates, click on the "Advanced" button. Then select the "Adapter" tab and press the "List All Modes" button. This lists all the available configurations for resolution, refresh rate, and colors. I fiddled around with these, trying all of the configurations that were supposed to work according to the Apple Multiple Scan 1705 specs. Unfortunately, anything other than VGA 640x480 60Hz would cause a "blue screen of death".
My girlfriend had indicated that she wanted to get a flat panel display anyway (to get back some of that desk real estate), so I decided to cut my losses and buy a new monitor. Unfortunately, I now have the exact same problem with the new monitor. So, it seems the problem is not with the monitor after all. Or, at the least, that's not the only problem. Once I resolve what other hardware/software issue is going on, I'll see if the 1705 display will work. But for practical purposes, you can consider this question resolved.
Thanks for entertaining my obscure question.

G4 MDD Dual 1.25 - Aperture 2 - Do I need newer Video Card to run the app?

I am hoping someone can help steer me in the right direction. I spent all morning reading about Aperture 2, decided I must have it, downloaded the trial version and THEN found out my computer will not run it. When I try to install it, it says that I don't meet the minimum requirements but doesn't specify exactly what the problem is. The Aperture minimum requirements are confusing to me in that it says Power Mac G5 with Intel processor, BUT it says you can have a G4 Powerbook with a 1.25 GHz processor. My Powermac G4 has a 1.25 processor. Not sure if that is the problem or if it's my video card which is the standard ATI Radeon 9000 Pro. If I replace my video card will I be able to run Aperture 2? If so, which ones would be compatible with my older Mac? — Thanks, mark
I have pasted my specs below:
*Hardware Overview:*
Model Name: Power Mac G4
Model Identifier: PowerMac3,6
Processor Name: PowerPC G4 (3.2)
Processor Speed: 1.25 GHz
Number Of CPUs: 2
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
*ATI Radeon 9000 Pro:*
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99703-127
Displays:
Apple Cinema Display:
Resolution: 1600 x 1000

Aperture 2 - Apple Store (U.S.)
Look down below at the:
Recommended Configuration
Does not look too good for you....
The ATI 9000 is pretty minimal...

Strange problems with nvidia video card

Hi, I don't know if it's really a problem, but I suppose...
I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
Resuming I couldn't boot ubuntu if the nvidia card was enabled...
Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
In any case the nvidia (I think) is always working (the external monitor plugged in the DisplayPort works... I think that's a confirmation)
Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just for information on what's happened before this problem with windows..

I'm using Firefox with html 5...
But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

Booting into Windows with Unsupported Video Card

I'm looking to buy a Windows-only video card. I'm currently using the Apple branded 8800GT and want to use an nVidia GTX 290. If I change my target drive to my Windows partition, will the system boot normally into Windows if I only have the GTX 290 installed or will I still be required to have the 8800GT in place in order for the EFI to launch normally?

Set your sits on PC 285 maybe? Your 295 will require more power than available and has been a stumbling block for all that tried.
http://forums.macrumors.com/forumdisplay.php?f=1
No mixing with ATI cards allowed.

MSI Mo. not compatible with ATI Video card??

Is that right, ppl ?
I just want get some advices from you
I'm going to buy a new video card : ATI R9600 Pro
and I'm using MSI i865PE NEO2 Mother board.
So , Any problems will happend ??? or that's allright ?
plz give me some advices
Thanks !

Quote
Originally posted by jeep327
Ive got a 9800 Pro and havent had any problems with my 875P Neo-LSR board.
the graphics card is the only thing that works well with my mainboard right now 3D Prophet ATI Radeon 9800 PRO on a 875P NEO main..

Is there a fix for MAC Pro with Dual video cards that randomly logs off and on?

From my readings on the Internet this seems to be a know problem. That even furthers my frustrations with the latest OS X upgrades. So far on both my MACBOOK PRO and my MAC PRO it has been a major downgrade as both systems are no longer stable. Enough with my complaints...
Is there any plan to address this problem with the MAC PRO? I can't believe 10.8.1 didn't fix it. More can be read on it at:
http://jvm-technology.blogspot.com/2012/08/mac-pro-users-experiencing-random-log .html
Does anyone have work around to use dual screen monitors with the system? I have two video cards, the article says to remove one. Has this worked for anyone? Can I use dual screens with the one video card. Before I go messing around with these type of things I just want to be sure that this is a real fix. For the price of the cards and the system I really can't believe apple has this issue in the first place and has not fixed it.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Aperture Won't Launch With 2 Video Cards

Similar Messages

Maybe you are looking for