Aperture won't locate referenced files

I get I dialoge box that says there are no referenced files associated with this picure but I spotlight finds it in a split second. Half of my pictures look blank after importing my Apeture library into my new iMac. Any suggestions would be deeply appreciated.

Half of my pictures look blank after importing my Apeture library into my new iMac.
How did you transfer your Aperture library to your new mac? From a TM backup? Did you copy it?
I get I dialoge box that says there are no referenced files associated with this picure but I spotlight finds it in a split second.
When do you see this message? Are you trying to reconnect the versions to the original files with the "Locate Referenced Files" dialog?
but I spotlight finds it in a split second.
Where does Spotlight find the originals? Inside the Aperture library or in a folder outside?
Please explain more.
Regards
Léonie

Similar Messages

  • Can't locate Referenced Files in Aperture 3

    All my photo master files are in separate directories on a NAS (network attached storage; 4x1Tb) and I import Projects from that into Aperture on my IMac.  I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master.  I can reconnect some Projects to the masters on my NAS, but not all.  Some projects won't reconnect using  Locate Referenced Files.  I can find the files and match the photos and Aperture looks like it reconnected, but when I look at the separate images, I get "File not found."  I know the original photos are on my NAS because I can see them using a separate PC hooked into it, but can't seem to complete making the link to the master.  My intent is to move all masters into my Aperture Library because I can't stand losing photos this way anymore, but I need help making that link.  Any ideas what's happening and what to do.
    Even though I have the originals on my NAS, all my processed versions (4 and 5* photos) are in my Aperture Library and I hate to lose those.
    Update: I seem to be able to connect one photo at a time, but selecting an entire set of Project photos and doing "connect all" doesn't seem to be working.  I have thousands of photos and working one at a time is impossible.
    How can I get help?
    <Email Edited By Host>

    I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master.
    How is your NAS formatted, where your original masters are stored? And how is the external drive formatted that holds your Aperture library?
    Your Aperture library needs to be on a drive formatted Mac OS X extended, Journaled. If the drive should not have that formatting, move the Aperture library to disk with the coorrect format.
    If you cannot reconnect originals, that are clearly there, the reason may be, that your Aperture library needs repairing, see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    I'd try to repair permissions and to repair the library, before trying to reconnect again.
    Since you want to consolidate all originals in your Aperture library, I'd try to copy the originals that cannot be recoonected, to the same drive that holds yor aperture libryr and try to reconnect them there, then consolidate them from there. It can be, that the network connection of the NAS is not reliable enough.
    Regards
    Léonie

  • Aperture 3, iPhoto-08 and Locate Referenced Files

    I usually import my photos to iPhoto-08 and work with my favorite ones in Aperture as Referenced Files.
    After upgrading my hard drive and using SuperDupper to restore my system to the new drive, the referenced masters are missing. I have tried Locate Referenced Files but the problem is that the iPhoto-o8 Library is shown as empty which is not. Navigating the bottom panel in Relocate Referenced Files, iPhoto-08 Library only shows 2 folders: Events and Last Import, with nothing inside them.
    Using Aperture iPhoto Browser I can see that all the files are in there. Using Finder I can see all my files under iPhoto-08 Library->Originals. No problem under iPhoto either.
    The problem seems to be that Aperture doesn't recognize iPhoto-08 Library structure since I upgraded my hard drive.
    Has any one had this problem? Any solution?
    Thanks in advance,
    Adolfo

    I just found out this piece of information:
    "Yep - Aperture 2 lets you reference files in your iPhoto libraries, while Aperture 3 does not... I have imported all my iPhoto libraries to the Aperture library now in a separate location from the iPhoto libraries."
    (http://discussions.apple.com/thread.jspa?threadID=2328349)
    Can somebody confirm this?
    Adolfo

  • Problems "locating" referenced files after importing from iPhoto.

    I recently began importing old iPhoto libraries to Aperture, mostly successfully, but have run into a couple problems locating referenced files. While the locate referenced files function worked for most of the photos, there are a handful of photos that, when I located the original file,  the time stamp was different (by 2 hours in most cases) and it was about 15% smaller than the file Aperture was looking for. As a result, even though it was clear from the thumbnails that they were the same images, Aperture doesn't even give me the option to Reconnect them.
    Aperture 3.4.5
    OS X 10.7.5

    . I use the Reconnect All button, but it only finds the one file, even when there are hundreds more in the same folder that are unlinked.
    Reconnect all works best, if you select all files that need reconnecting at once, and then select the first file in the list to reconnect. If the other files are in the same folder and are correctly named and match, then "reconnect all" should do it. But if the filenames differ, you will have to do it one by one.
    Also,  the files are all still correctly linked in iPhoto, but every single link is broken once I import it to Aperture.
    You are importing with "File > Import > Library", correct?
    That is supposed to work. Have you tried to repair your iPhoto Library before importing to Aperture?
    Use iPhotos First Aid Tools to repair:
    Try to repair the permissions, followed by repairing the library.
    To launch the First Aid Tools,  hold down the Command and Option keys ⌥⌘ while double-clicking the iPhoto library or the iPhoto icon in the Dock.
    The iPhoto Library First Aid dialog appears.  Select the Repair option you want to use - first "permissions", then "database".
    Léonie

  • Locate referenced files... bug?

    First of all, I run a reference library.
    Every single time I launch Aperture I must do a "locate referenced files". It never remembers the location of my files, even though the library is always on a drive connected to my system. This has been a persistent problem going all the way back to 3.0.
    Now, prior to version 3.5, I could launch Aperture, do "Locate Reference Files", then select "Reconnect All", and it would re-connect my entire library. However, as of 3.5, "Reconnect All" never reconnects all. Instead, it ONLY reconnects the image I happen to be viewing. In other words, I must individually reconnect every single image I intend to edit, export, etc. This has become a nighmare. I needed to export 500 images for a client today, but I couldn't since I would have had to reconnect each file one at a time.
    Another related problem: If the image I'm trying to reconnect happens to be a PSD file, it will trigger an error saying "unsupported format", then the preview image turns black and I can no longer even see the image. When that happens, the only solution is to launch Photoshop, export the image as a TIFF or JPEG, then re-import back into Aperture.
    Prior to 3.5 I could "Reconnect All" as long as the image being viewed was NOT a PSD, and it would reconnect all files, including PSDs. As of 3.5, since "Reconnect All" is broken, it's impossible for me to reconnect PSDs without causing the "unsupported format" error.
    To summarize:
    1. I must reconnect every time I launch Aperture.
    2. "Reconnect All" doesn't work as of 3.5. I can only reconnect individual files.
    3. If I reconnect a PSD, it throws an error and turns the preview black.
    Any ideas?

    OK, well, after browing a bunch of other threads I found a way to make "Reconnect All" work, even though the process is different than it used to be. Here's how:
    Open the search box and view by "Offline" files. Then select all images and Reconnect All. Bam. Not only that, it seems to remember the location when I launch Aperture.
    I still think there's a Photoshop related bug, but for now I can live with it.
    I guess my issue has been resovled.

  • Locate referenced files for whole library?

    Hello,
    I have a referenced library (internal drive, iMac) with Masters (on an external drive). I made a back-up duplicate (finder copy) of that Masters volume, on another drive. Now I'm working from that duplicate copy of "Masters" (same name, spelling, as original "Masters", on a separate external drive).
    How do I reconnect all 60,000 referenced files (from the duplicate "Masters" drive) with my library (on the iMac). I know how to do them one file at a time from the Aperture library (File > Locate Referenced Files) but can not figure out how to reconnect everything in one or two easy clicks.
    Help!
    Thanks!
    Patrick

    Select a batch of images, and go into +Locate Referenced Files+ - just the same as doing one at a time. Match up one image from your batch with the file and then, instead of hitting the <Reconnect> button, hit the <Reconnect All> button.
    Do a small batch initial until you get the hang of it, and then make a bigger selection and go and have a cup of tea...
    Here's an [earlier description|http://discussions.apple.com/message.jspa?messageID=11334896#113348 96] I gave of this process with some background details of how I handled it first time around.
    Hope this helps.
    Regards,
    Gary

  • Locate referenced files problems

    hi there,
    i have a big problem with aperture "locate referenced files" dialog panel.
    it doesn't allows me to select the source hd where files are stored.
    i usually create new library and import files as referenced. but when you move them to another hd, and Aperture doesn't find them, it seems impossible to select the new source hd.
    can anybody help me? it is a Aperture's problem or a conflict within Aperture and Os?
    is a matter of the hard disk?

    In the Info dialog, what is listed under "General➞Format"?
    the format is macos extended (journaled)
    i made a little video to explane what appens. you can follow it here

  • Fastest? Relocate Masters or Finder move with Locate referenced files

    I have maxed out the 2 x 1TB drives in my MP dedicated to referenced masters, and I'm about to consolidate them onto a new 2 x 2TB drive setup. My question is which is the fastest solution for moving 1.5 TB of images on my current setup onto one of the new 2TB drives.
    FYI, the new HDD is now connected via eSATA to an external housing, with write speeds of around 100 MB/sec. Once all data is transferred and relinked, I'll open the case and swap out the new drives internally for the old 1TB ones.
    Is it fastest to?
    1. Use Aperture's "Relocate Masters" fucntion. My question is how much extra overhead is involved with doing this via Aperture?
    2. Do a Finder copy of the files, then once they are moved open Aperture and use the "Locate Referenced Files" to reconnect the images to the new HDD.
    Has anyone done any speed tests on this? I have about 80,000 refernced images, so I'd like to cut the file transfer time down as much as possible.

    Select a batch of images, and go into +Locate Referenced Files+ - just the same as doing one at a time. Match up one image from your batch with the file and then, instead of hitting the <Reconnect> button, hit the <Reconnect All> button.
    Do a small batch initial until you get the hang of it, and then make a bigger selection and go and have a cup of tea...
    Here's an [earlier description|http://discussions.apple.com/message.jspa?messageID=11334896#113348 96] I gave of this process with some background details of how I handled it first time around.
    Hope this helps.
    Regards,
    Gary

  • "Using the Filter HUD to Search for Referenced Files" (and "Locate Referenced Files")

    I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.
    I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this.
    Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?
    Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection in the left hand pane when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run either of these commands?
    Thanks for any help in my getting this working better for me.

    hotwheels 22 wrote:
    I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.  1
    I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this. 2
    Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?  3
    Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection {4}  in the left hand pane {5} when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run {6} either of these commands? 7
    Thanks for any help in my getting this working better for me.
    1.  Just copy and paste the URL from the on-line User Manual.  Very helpful.  Are you on this page?
    2.  From the above-linked page:
    Show the Filter HUD by doing one of the following:
    Choose Edit > Find (or press Command-F).
    Click the Filter HUD button beside the search field in the Browser.
    The instructions specify ONE of the following.  Your question indicates to me that you are trying to do both.
    3.  The User Manual has used the wrong term here.  It should say "Choose 'File Status' from the 'Add RULE' pop-up menu."
    4.  The command -- like all commands? -- works on the currently selected Images.  On the same page in the User Manual it says:
    You can select a group of images in the Browser and Aperture can show a list of the referenced images within the selection, including information about where the masters are located. {Emphasis mine.}
    5.  The Aperture workspace is highly configurable.  I don't know what you mean by "the left-hand pane".  Of what?
    6.  Yes.  Of course it matters.  At some point in the 80's when the GUI became standard computers standardized on the "Noun→Verb" syntax:  Select object(s), select command(s).
    7.  Not sure what the second command to which your refer is.

  • I updated to Mavericks and Aperture 3.5. After the update, Aperture doesn't see referenced files. I get "No Referenced Files"

    I updated to Mavericks and Aperture 3.5.  All my images are referenced on a stand-alone drive.  After the update, Aperture displays thumbnails, but I can't edit because Aperture doesn't see the referenced file ("image offline") and when choose all of my images and I run locate referenced files ... I get "No Referenced Files."  I don't get the screen to "look" for the files.

    Did you make a clean install and restore the library from a backup?  No.  
    Or did you install the new system amd new version on top of the old system?  Yes.
    What version did you upgrade from? 3.4
    Is your Aperture library onyour internal drive or also on an external drive? External
    During the update, has your Aperture library been moved in any way? No, its still where it was on the external drive.
    Thanks for your help.  Ideas?

  • Locate referenced file

    To save space, I relocated a few projects to my network drive, using the file-->relocate original.
    Now, I  can't find a way to indicate in aperture where the original photo or project is located. I want to know if a given photo is located in the main mac hard drive, or if it is one of the photos I have relocated,
    If I highlight a photo and select "locate referenced file" it says "The selection doesn’t have any referenced files.".
    If I go under info for the phot and select file info, it just gives me the name of the file but not where it's located.
    Where in aperture can I find where the orifinal file is stored?
    Thanks.

    Create a smart album with a rule based on the file status:
    File > New > Smart Album
    And add a rule:
    File status is "referenced"  (  or "misssing"    or  "offline")
    That will show you the problematic images.
    Regards
    Léonie

  • Locate Referenced Files question...

    Could someone help me sort this one out?
    I have a total of 8407 images currently in Aperture (all referenced).
    After I select all the images and then open Locate Refenced Files... it shows me that all iamges are online and there is a 0 under "Not Found" column. Sounds OK, but the problem is in this window it tells me that I only have 8396 images. All in the correct place.
    How is it that I have a difference of 11 images? What do I look for or how do I solve this discrepancy?
    Thank you,
    Jerry

    Hi Jerry,
    Images are never "referenced".  Every Image has an Original.  Each Original is either Managed or Referenced.  Images may share an Original (for instance, multiple Versions from the same Original).
    How did you come up with 8407?
    How did you "select all the images"?
    Have you checked for rejected Images?
    Have you allowed for some Originals to be assigned to more than one Image?

  • Locate Referenced files

    Hello there,
    I've purchased Aperture right now and I've lost a lot of referenced files.
    Aperture doesn't link them anymore, although I guess iPhoto didn't it before, because I used to put all my picts in without checking if it kept the originals.
    iPhoto showed me always thumbnails and after I switched to another mac I lost all my referenced.
    Luckly I still have all original picts but Aperture seems it doesn't recognize/find them.
    How could I fix it?
    thanks in advance

    ah...ok... I unchecked "Show only files not found" and it works...thanks a lot
    yes. I had a problem to reconnect all my picts.
    thanks again

  • Aperture won't read DNG files

    I'm sure there's a simple solution I've missed, but Aperture 3 won't open DNG files converted from Olympus RAW (ORF). Any suggestions?
    Brian

    Aperture 3.5.1 and the camera is the Olympus OM-D E-M5.
    And yes, Aperture will convert the RAW/ORF files but the devil is in the details. And since you asked (sort of), here are the details:
    I own and have happily used Photoshop CS4 for the layered compositing I like to do, but it won't support ORF files
    I tried importing/converting them in Aperture then editing in PS4 ... but Aperture 3 and PS4 don't play together well, so many come back as "unsupported file format"
    Apple can't fix the problem and Adobe no longer supports PS4... put another way, Apple can't do anythig but they care, and Adobe could do everything but they don't care
    It got worse when I upgraded to Mavericks, so to get around that I had to upgrade to Photoshop CC and pay the monthly "rental"
    Aperture and Photoshop now work, but the demands of running them both are beyond my aging iMac that can't be upgraded, so I have to buy a new one, but the monthly fee (which everybody assumes will only go up in cost)  + purchase of a new iMac for a guy on a fixed income are too much
    So, I thought if I used DNG to convert the ORF files I could import them into Aperture for all the basics and organization, then use PS4 for the compositing... but Aperture won't read the DNG conversions.
    And that, as the man used to say, is the name of that tune,
    Brian

  • IE 6 won't locate class file???

    Can someone tell me what's going on here:
    I've created a simple Hello world applet and compiled it.
    When I use the appletviewer to view the html page I've created for it, it works fine, no problems.
    However if I try to view it in Internet Explorer, I just get a grey box where my applet should be and and the message "class HelloWorld not found" in the taskbar.
    I can't understand why it'll work in the appletviewer and not in Internet Explorer.

    <HTML>
    <HEAD>
    <TITLE>A Simple Program</TITLE>
    </HEAD>
    <BODY>
    Here is the output of my program:
    <APPLET CODE="HelloWorld.class" WIDTH=150 HEIGHT=25>
    </APPLET>
    </BODY>
    </HTML>
    I don't think it's a problem with the HTML because it if it did, it wouldn't work in the appletviewer either. I think it might have something to do with with how IE locates class files?

Maybe you are looking for