Aperture won't print to fill page!?!

I had followed a couple threads on this topic and have come to a very aggrivating conclusion:
Aperture printing will NOT let you set the border size smaller than the LARGEST print border your printer has. So my Epson printer which can print to within 0.12" within all edges except the bottom, which can only go to 0.56", is FORCED to print within 0.56" along EVERY EDGE.
The result: I can't even print an 8x10 within Aperture because it forces me to have even borders.
I can't believe it. This MUST be FIXED.

Very odd, there was a problem with this a few versions ago (I think even 1.0) but printing on my R800 allows me to adjust the border as low as .13 inches.
I suppose one possiblity might be that you need to reload the printer drivers...
On a side note, since you have an r1800 make sure you have the latest icc profiles possible, using the ones here:
http://www.epson.com/cgi-bin/Store/EditorialAnnouncement.jsp?BV_UseBVCookie=yes& oid=59082650
For the r800 the premium profiles are here:
http://www.epson.com/cgi-bin/Store/EditorialAnnouncement.jsp?oid=51716719
I just thought I'd bring that up since I had a rough time finding where to download the icc profiles alone for Epson.

Similar Messages

Macbook Pro won't print the first page of any file in any application.

Problem: My Mid-2009 Macbook Pro won’t print the first page in Microsoft Word, Sibelius 6, or in Adobe Reader. My printer is an old Canon MP480 that’s worked for almost 2 years perfectly. As well, the “print to pdf” function results in the same error. However, if I open a new user account it all works fine. To change user accounts would be an extreme hassle though so, if possible, I would like to first remedy this one.
Recent changes: the motherboard of my computer was replaced about a week and a half ago. I printed a lot of stuff from Word two days ago and that worked fine but, already then the print to pdf function was cropping off the first page. At the time, though, I accredited the issue to the word documents being filled with pictures of sheet music that I was printing instead of text.
Things I have tried:
Updated Mac software
Repaired Disc Permissions in Disk Utility
Checked for new printer drivers/firmware
Reset the PRAM (http://support.apple.com/kb/ht1379.)

No but it's not a printer-related issue because the "Print to PDF" function also leaves out the first page.

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I am trying to print a fillable form. It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print." Th latter is not true. Won't print all, the page I am on, nor any series of pages inserted

I am trying to print a fillable form - - an application for a Chinese visa. It will not print and I get two error messages: "document could not be printed" and "there were no pages selected to print." The latter is not true. Won't print at all, the page I am on, nor any series of pages inserted.
Am using a MAC desktop and a Cannon PIXMA MX922 printer.
I need to print this form now that it is filled out? What can I do?

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

Won't print because no page selected

I tried to print, but messages comes back that document cannot be printed because no page selected. I have reloaded software but problem persists.

thanks Macterral,
that's exactly what happened. I guess my illustration looked pro enough to be judged as studio work (GOOD! cuz that's my job anyways )
that's kinda flattering and nice that they are protecting artists... but yeah, i went with a different print service that was less hassle.
I wouldn't be so nitpikcy about this if they had mentioned something before submitting the prints re: copyright material - but rather than an explanation off the bat, i had to search for teh reason. It took a couple of days before they even told me the print was cancelled and another set of days for feedback from them to the reason why. By that time, i had already searched and ordered from a different service.
That's too bad, i would have liked using apple's service because iPhoto made it convenient... but turns out more of an inconvenience.

Z3200 won't print to custom page size

Hello,
I've created a banner that is 23"w x 82"h (in CorelDraw Suite 4). The page setup of the Corel file is 23" w x 82"h. I've been trying to print it on the z3200 designjet, but have had no luck. I created several custom page sizes (23" x 82", 24" x 85", 24" x 82") using both the "Printer Properties" dialogue within CorelDraw as well as adding a "Form" in the "Print Server Properties", none of them work. I've set the correct paper (24" wide HP Bright White Bond, feeding from the roller) on the actual printer itself, and in the Printer Properties.
I've played around with all of the different settings that I can and sometimes see the following error message:
[1/1]Paper size selected (width:23.00 inches, height: 82.00 inches) is larger than loaded paper (width: 24 inches). Please verify your printer setup.
When the page prints, it is resizing the content to be 8.5" wide.
I don't know what I'm missing. Any advice would be greatly appreciated!
Thank you in advance,
Karen )

I'm having the same problem here in China as well; and I've talked to the tech support in my region and no help. Called the province HP tech rep and he has no clue at all.
Does any Tech/Eng here could help us? Otherwise there's no reason for me to use you guys machine anymore...

HP 6510 won't print black on page (dumps it on the right, image inside)

Hello everybody,
For the past couple of days my HP 6510 printer no longer prints black ink on the page.
I've already searched the forums to look for an answer and have tried pretty much everything, as well as going through the whole troubleshooting page here:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c02907259
The printer still does not work properly. The CMY inks still work fine, and there was never a problem with any of them.
I had noticed that the estimated ink levels were going down for the black ink so I knew that it was actually releasing the ink, just not on the paper. (although I do get the two light grey bars when doing the clean printhead test, but no black.)
I noticed that there was a lot of ink on the inside of the right side of the printer, just under where the print cartridges are located when they are not in use, just a big blob of black, although I later found out that it was actually all four inks - mostly black though.
I place a little piece of card in there and printed a short document to see how much of each ink was being released, and this is what I found.
(Open in new tab for full size)
I also bought a new black cartridge to see if the problem would go away and it doesn't. The fact that nothing seems to be 'broken' and that the other inks all work fine I am convinced this is a software issue and that the printer hardware is not damaged.
Printer Driver: 09.84.00.1173
OS: Windows 8.1 64bit
Connecting over Wifi
Does anybody have a fix for this?

There seems to be nothing unusual about the printer other than the missing black ink.
The vents are not clogged, I even got a new black ink to see if that would fix it, unfortunately it didn't.
As you can see in the picture I added to my original post, black ink is being released, just not on the page itself.
I've tried cleaning the print head several times from the tool menu, but this still hasn't fixed the problem with my black ink, and the alignment tool fails every time.
I've tried to manually clean the printhead and hard reset the printer but that didn't fix anything either.
Is there an older driver for the printer that maybe I could try and see if it works?

Acrobat 8.1 PDFmaker won't print envelope size pages

Vista Home Premium 32-bit
Acrobat 8.1.3 Professional
Word 2007
I create mail-merged #10 envelopes in Word 2007 and then use PDFmaker to create a PDF of the result of the mail-merge. The resulting PDF has a number of pages each the size of a #10 envelope.
This has worked for years, until today.
Now, the pages in the PDF created from PDFmaker are 8.5"x11" with the "envelope area" centered in the document.
I can not find any possible reason for this or any solution in this forum - I have tried a number of solutions for other problems listed in this forum and this has not fixed the problem.

Have you checked if the Adobe PDF printer has Envelope 10 paper size.
if it doesn't exist:
From Control Panel>Printers>Adobe PDF
Right click, select Printing Preferneces
Adobe PDF Page Size -> Press Add
Create a new paper size with following details:
Paper name: Envelope 10
Width: 10.375 inches
Height: 4.5 inches.

Aperture won't print from photo tray on HP Photosmart 6520

I've just started having a problem printing 4x6 photos with Aperture. When I print a borderless 4x6 glossy using the photo tray on my Photosmart it works fine. When I say to print a 4x6 borderless using the photo tray with photo premium paper it prints from the main tray rather than the photo tray. Plus now it's giving me a picture with borders, even though I specified borderless. Anyone have this problem?

Sorry, I do not know anything about your Printer. Have you looked, if there is an update for your printer driver, before you start reinstalling Aperture? If yes, upgrade your printer driver first. Also check, if you are having the same problem when printing from a different user account. Maybe some settings in your user accunt or startup items are interfering. You could also check, if printing from iPhoto or Photoshop has the same problem (but don't waste expensive photo paper on these tests ).
What is the Aperture version you are using?
Let me ask this: is there a problem deleting Aperture and reinstalling it? Will I lose anything? Thanks.
Your images are stored in the Aperture library/libraries, and your settings in your user library. This should not be affected by reinstalling Aperture. But do not reinstall, without ensuring that your backup is current.
How to reinstall will depend on the Aperture version you are using. This support article describes the procedure - ignore the title of the document - it is written to help with a nasty bug.
See: Aperture 3.4: May quit unexpectedly on launch after updating
Regards
Léonie

HP Printer Won't Print Complete Page?

I connected my HP printer ( WI-FI) to my PowerBook. Problem is that it won't print a complete page. On preview it shows the total page - when I try printing all I get a third of the page print & blank!!!
Any suggestions are welcome!

Hello OscarBlanco, I see that you have stated multiple issues, viz Printer printing test pages and printer prints half the page. To solve the "Printer printing test pages", perform the below steps, which should also resolve the half page being printed. The printed test page is called Alignment Page. Once the Alignment page is printed...Lift the scanner lid.Place the alignment page with the print side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.Figure : Place the alignment page on the scanner glassClose the scanner lid.Press the Start Copy Black button () or the Start Copy Color button () on the front panel of the printer. The printer aligns the cartridges.

Laserjet M475DW won't print last page from iPad

It's all in the subject. The printer prints fine via the iPad PrinterControl app but won't print the last page of the Word document or Powerpoint slide deck. Since you can't choose which page to print from PrinterControl, I can't force the printer to print only the last page. The ePrint app looks like you can choose to print only the last page, but the pages shown on the iPad's screen in print preview don't match the actual pages of the document, so there's no control. Printing via the iPad's native email app gives crazy font size and overwritten text. Can anyone please help me? Thanks in advance.

Lg28,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Word 2004 won't print individual or last pages

When printing a document in Word, the programme has just started missing the last page of docs with 2 or more pages, and won't print any single page documents. Even double sided with an even number of pages it misses the last page on the back of the second last.
It says it is going to the printer, and the printer detects some data coming in, but then prints nothing. My work around is putting a blank page at the end of each doc, but this is annoying and cumbersome.
This has only just started happening. Having searched for answers here and other forums, I couldn't find a solution.
Have tried taking off collation, printing only page ranges, current page, and have looked in all the settings to no avail. This happens with both Kyocera printers (one is new, the other did not have this problem before, and all other appications work fine, making me think it is the application)
Has anyone encountered this problem before?
Any help much appreciated.
Thanks from Downunder,
Chris

Hi Chris -
The first things to be sure of are a) that you have the most current updates for the version of Word you are using, and b) that you have the latest print driver available.
If you have recently updated Word/Office and-or OS X, you may need to reinstall the printer driver even if it is current.
You'll find some helpful suggestions here
Help! Cannot print
http://discussions.apple.com/thread.jspa?threadID=298892&tstart=0
Regards |:>)

Pages File Won't Print

I created a flier that won't print as a pages or PDF file. I redid it with a new template, and then it printed. Problem is, I really like the old one and want to use that one instead. Help?!
Thanks

Man am I glad I found this reply... I was was cursing and ready to throw my powerbook into the road. Well, not quite that bad but I was really getting ******. What is the deal with this? Gloss paper, plain paper... who cares. Why does it matter for just a simple page print?

OfficeJet 8500 909a - connection is indicated but it won't print

I have installed the HP Network Diagnostic and it says "The printer is connected and the services related to network connections have been verified and reset to a normal operating state." The printer shows up in my devices as operating properly and connected. It works off another computer. But it won't print a test page or otherwise connect with the computer I'm operating here (Dell Inspiron, with MS 7 Home Premiere). It has worked fine before. I've turned the printer on and off, restarted the computer, and generally tried all different ways of turning these things on and off. What in the world is the matter with this connection?
This question was solved.
View Solution.

Let's try a few things:
1. Make sure your router has updated firmware and then reboot it by removing its power cord momentarily.
2. Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). You can change the DHCP range in the router settings.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (ends with .1) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a photosmart 7350 that won't print on my xp update 1 machine. it runs the diagnostics from

Photosmart 7350, Windows XP Upgrade 1.
The printer runs diagnostics at the printer but not to the computer. The computer shows it as the default printer, but won't print a test page, a command line page or a notepad page. The printer que shows the print command and a second later says deleted.

I would strongly recommend upgrading to SP2 or SP3 since both made changes to the printer backend. Has it ever worked?

Aperture won't print to fill page!?!

Similar Messages

Maybe you are looking for