Aperture3 does not export sharpening

Hi,
I've been using Aperture3 for a few months now but only recenly got into more serious post-processing, especially using quick brushes including sharpening. I have just noticed that my sharpening adjustments are not transferred into exported copies, be it jpeg or tiff. I am working with RAW files from Panasonic FZ-150 converting them to tiff in order to apply noise reduction with Topaz plug-in and after that I apply all other adjustments including quick brushes in Aperture. Then I export from Aperture using JPEG - Original Size with Quality 12 and sRGB profile. The resulting JPEG files are not comressed (appx 9MB in size) but the images definitely lack sharpening. This is not a compression issue; if I turn sharpening off in Aperture the images turn identical to the exported copies. So this is definitely a problem with export.
Here is one example where the difference is especially noticeable because the original image was not very sharp in the first place. Yet selective sharpening seems to give very good results in Aperture; however the export version on the left does not contain any signs of sharpening.
I have found a few old threads about this issue but without any solution. I hope Aperture technical gurus are reading and responding on this forum and will be able to help. Has this been fixed? I really like selective sharpening in Aperture but what's the point if I can't share the results. Hope somebody can provide the solution.

Ok, and here is my third and probably last post. As I suspected after my analysis of 100% crops, exporting with reduced sizes actually helps to achieve very similar JPEG look comparing to the original version in Aperture. Here is an example with the same file from the previous two posts but using export preset "Fit within 1024x900" and Quality 12. The resulting jpeg output looks much closer to the original on the screen; any difference is purely attributable to the compression effect (the output file size is only 500k). So I guess this solves the problem - I will use smaller export size to make sure it looks close enough to the original for web sharing. Hope this thread will help other users in the future. If you have any other tips with regard to this "issue", please share.

Similar Messages

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

Hi pgrillo,
I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
Best,
Sara

Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF.

Namaste InDesign gurus,
I have a problem at hand. Wondering if anyone has encoutered similar problem before? Any help is greatly appreciated. And if you're in San Francisco bay area - I can buy you a lunch :-)
Short description: Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF. All the ligatures are assembled and displayed in the PDF.
Adobe Indesign Version: InDesign CS5 Design Premium - regular U.S. version (not ME).
Steps I took:
I purchased CS5 Design Premium and also purchased the IndicPlus plugin to author sanskrit documents in InDesign. I create Sanskrit text using either of the following methods.
1) Itranslator
2) Paste the devanagari from the Itranslator directly into InDesign or paste it first into MSWord and then copy from MSWord and paste it to Indesign.
It doesn't matter how I paste it. After I apply the IndicPlus character/paragraph style so that the sanskrit looks good in InDesign, when I try to export it to a PDF. The PDF does not display the ligatures currectly. It just lists all the characters in order without assembling.
I've spent a lot of money buying CS5, IndicPlus and then I can't even create a simple PDF document from InDesign. It is very frustrating.
Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
(Please let me know if my problem description needs more fleshing out).
I could create the PDF from MSWord directly but I'm trying to use indesign to layout my book. If InDesign cannot export to PDF I'll just have to use MSWord for my book layout. I've spend probably scores of hours trying to learn InDeisn and formatting my book content - seems like it is all going to be waste.
Is MSWord the best choice or only choice for laying out books that have sanskrit text in them?
-Ravi

Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
Not Sanskrit, no, but plenty of Hindi, Nepali, Marathi, and other languages written in Devanagari script - so it should be possible. I don't even use IndicPlus, which by most accounts makes working with Indic text much easier.
1) Itranslator
I've never seen this, but a quick Google led me to the homepage of ITranslator for Windows, where I saw this:
Itranslator 99 (Build 1.3.0.86) & New Beta Version
uses 8-bit true type fonts and is compatible
with Windows 95/98/ME/NT/2000/XP.
For more information, click here.
Itranslator 2003 (Build 2.0.0.38) & New Beta Version
uses 16-bit Unicode-compatible fonts and is working
only on Windows 2000 / XP / Server 2003.
For more information, click here.
So, if you're using ITranslator 99, there's the problem - those "8-bit true type fonts" won't work in InDesign. Can you post a sample of the text you're trying to paste into InDesign? Name the font(s) you are using, both in Word and in Indesign, and if possible make a small sample of the text available for us to test. It's also possible that InDesign is using a substituted font, which could cause this problem. So, if the font name in InDesign has brackets around it, you know that InDesign doesn't actually have that font installed and is auto-substituting. Also, if you go to View -> Screen Mode -> Normal and the text is highlighted pink, you know that the font has dropped. (Unless the highlighting for dropped fonts was turned off - check in Edit -> Preferences -> Composition and make sure that "Substituted Fonts" is checked.
Also, for what it's worth, is there any way you could Place your text instead of copying and pasting? This may be cause of your problem - but even though it probably isn't, it's still worth a try.
Lastly - no, I've found InDesign to be superior for typesetting for almost all languages, but the learning curve is pretty steep, and many of the problems faced by people working in non-English languages are not easy to research when you have a problem.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

ITunes v8.1 does not export music library in plain text w/proper CR/LFs?

Just an FYI...I can recreate this every time. Has anyone else tried and seen the same issue with the new v8.1? I never had this issue with the previous iTunes release. Thanks!
The new iTunes v8.1 released yesterday does not export the music library in plain text with proper CR/LFs.
To recreate this bug:
Select Music from your library
Go to File -> Library -> Export Playlist...
Save as a Music.txt and view the output file.
You will see a continuous single line that contains correct tab separations. However, the correct end of the subject headers in addition to each song (which should be it's own line) is missing proper CR/LFs to format the file correctly.

Seeing it with 8.1 under 10.4.11 too.
I was really hoping that 8.1 was going to fix the problem with text export mangling accented characters, not to keep that bug and add a major new one on top of it!

Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

Exporting does not export the music tracks.

hello- i am needing help exporting my movies from Adobe Premiere Pro 2014. When i try to export a movie, it does not export the music tracks. the audio is fine, but it is not exporting the music beds. any ideas as to why would be VERY helpful! thank you!
==============================================
Edited by moderator to trim the title down to the essential.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

After the 10.9.3 update my Adobe Premiere does not export properly.

After the 10.9.3 update my Adobe Premiere does not export properly. Someone HELP!
Can anyone help?
Thanks!
<Edited by Host>

Having the same problem yesterday I spent 2 hours
Contacting tech support Apple and Adobe.
Apple says clearly that it is Adobe responsibility
and Adobe tells to contact Apple...
And none of the companies are telling when and if there will be a fix.
I'm ready to go back to PC where hardware companies
are not trying to boycot software companies. That's my opinion.
I already lost one job because of this.

Adobe story does not export lines of dialogue that are amrked with (CONT'D) into a csv file.

For some reason Adobe story does not export lines of dialogue that are marked with (CONT’D) into a csv file. The rest of the dialogue exports fine, bit the bits that are marked with (CONT’D) do not show up in the dialogue column !. Can this be changed with some settings or is this a bug? The script was imported from an FDX file. If anyone has a fix for this, please, let me know.
Thenk you.

Thanks for reporting this issue.
This is indeed a bug.
Just to get correct data in csv, a workaround for this issue could be to replace word 'CONT'D' with a place-holder word, perform an export-to-csv and then change it back.
1. Press Ctrl+F in script to open Find/Replace
2. Replace word 'CONT'D' with a placeholder word, say 'TEMPCONTD'
3. Export the script to csv
4. Now replace the placeholder word with 'CONT'D'

H.264 plays, but does not export

I have a QT movie in H.264 format which plays just fine in QT Player, however, I want to brighten it up a bit (gamma).
When I try to export from QT Player to some other format (Photo-Jpeg etc), only the audio gets saved.
Also, when using Cleaner Pro, I can to the settings, preview, brighten sharpen etc, and it all looks good. But only the audio ends up being saved.
Has anyone seen this?
Thanks
William

Hi Don,
If it is not a protected movie:
Go to system profiler. Does your graphics card support Core Image? the size of the movie is quite small but if the GC does not support core image you will get a result like this. You shouldn't even have a brightness choice in the AV controls if it is unsupported but-..
About this Mac > More Info... > Core Image: Should say "Hardware Accelerated" and Quartz Extreme should be "Supported". The lack of either one of these will produce this result.
Sweet Polly

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Keynote does not export Qucktime embedded movies within slides? Won't play

I Have a Quicktime movie within one of my slides and when I export a Quicktime .mov file, that particular slide does not run the quicktime movie within it, just stays on the first frame?
any ideas where I am going wrong?
Message was edited by: thecount

I think this is a limitation of the export -> quicktime option
Keynote does all sorts of tricks to keep the file sizes small- and one thing really gets butchered are embedded quicktime movies- I have two almost show-stopper frustrations with this:
1- quicktime movies do not loop when exported to quicktime (limitation of sprite track? will look around in live stage pro)
2- all builds and movies must play in entirety before you can click through- this makes being able to skip around very cumbersome especially if using an indexed presentation

CS4 Premier does not "Export"

Hi,
Something happened to my Premier CS4 and I am confused, hoping you can help please.
When I make a timeline, and click on "export", the Media Encoder does not come up. Premier seems to go into a modal mode, where nothing can be accessed, except unless I click on ESCAPE first.
I am not sure what could be causing this.
Can you please tell me how this can be fixed?
Thank you,
Mike

'01 Chassagne-Montrachet Vergers, 1er Cru Michel Colin-Deleger
or
'05 Chassagne-Montrachet A.C. Bouchard Pere et Fils
I'd probably go with the Domaine Colin-Deléger, especially as Les Vergers is one of my favorite vineyards. Michel Colin is a master of white Burgs in my book. The ‘01 is a fantastic wine and is drinking well now. I’d guess that it’d still have another good ten years, depending on what one wants in a white Burg. In general terms, the ‘01 vintage is rated slightly below the ‘05, but that does vary by exact properties.
OTOH, we did a tasting with Henri Bouchard about 4 mos. ago. Besides some of his family’s red Burgs, and a Chablis venture wine with Favere, we had the ‘05 - ‘07 Puligny-Montrachets and the same years of their Chassagne-Montrachet. There was no Bâtard-Montrachet poured. I bought my allocation of the ‘07 of each and expect shipment soon. The 2001 vintage was nearly excellent for most properties, so that is a very worthwhile wine. I’d have to check my notes, but think that we had the Chassagne-Montrachet, and I’m almost sure it was the ‘05, in New Orleans two weeks back. Again, I would carafe this wine to open it up a bit.
As a négociant, the wines from Bouchard Père et Fils can be a tad less even, than something from Colin. Still, they are great producers, and are also buying more property, from which they will be producing more of their wines, from the dirt to the bottle. More and more "estate wines."
I’d guess that the Bouchard would likely be less expensive, so the final choice might boil down to it, should $ be an object. If one wanted it to drink as if it had more years on it, more time in the carafe and the glass would give one the impression that it was older, than it is.
In short, either would be an excellent wine. I’ll share my cellar with you, if you share your cellar with me!
Hunt

Fireworks does not export layers to files

I'm trying to do a very simple task in Fireworks and for some reason it will not work. I have a document with one Page and one State and 30 Layers. All I need to to do is export each Layer to a File. According to Adobe's own documentation all I should need to do is select Export > Layers to Files. However, no matter how many times I try this all it does is export the first layer. This is one of the most simple task imaginable and yet it doesn't work, which I find unacceptable for a piece of software that costs as much as Fireworks does. Has anyone else had this problem? Is there some secrect undocumented trick I'm not aware of?
Any help would be appreciated. My company is ready to purchase 50 copies of Fireworks for our UX team, but if this is how the app behaves I'm going to recommend going with another program that works as advertised.

I have multiple layers. I made the mistake you're referring to when I first started using Fireworks so that was the first thing I checked. I noticed some other things in FW acting wonky, so I installed the latest update and rebooted my machine and everything seems to be working fine now. Thanks for the quick reply.

Aperture3 does not export sharpening

Similar Messages

Maybe you are looking for