Apeture 3, How do you customize the Adjustments tab

Does anyone know of a way to set which adjustments are visible by default when you first click to edit an image? My goal is to get curves to be always visible on the adjustments tab in the inspector.

Click the Action Menu (the gear icon) from the Curves Brick and select "Add to default set".
You cannot re-order the bricks. Aperture processes the adjustments in the order of the Bricks, and orders the Bricks in the order which gives the best results (quality as well as efficient processing).

Similar Messages

How do you customize the toolbar in Windows XP?

How do you customize the toolbar in Windows XP? When I right click on the menu bar the "Customize..." option is there but it does absolutely nothing.
Which brings me to the rhetorical question as to why it was necessary to shuffle everything around, was it broken? Did it not work? Since 2006 I've moved my mouse pointer almost instinctively to the left side of the screen, now all of a sudden I have to go right, is there a point?
This is like supermarkets that as soon as you have figured out where everything is, they shuffle everything around and now you are stuck in mystery shopping. At least they have economic reasons. Meanwhile Firefox seems disposed to make itself look more like Chrome, but hey if I wanted Chrome I'd get it.

Nope... Thanks, but Safe Mode does not do the trick. Oh sure you can move the buttons around and rearrange things to your liking, unfortunately it does not stay that way once you get out of Safe Mode.
I guess if you use an XP machine you are doomed to use FF's interpretation of what it should look like, which is ass backwards from what it has been for the past FIVE YEARS!!! Why not? It seems XP users are now the Freddo's of computing.
Someone should go to you developer's homes move everything around, forks in the basement, beds in the bathroom, TV up in the attic with the mice, dining table outside on the porch, see how you like it.

Lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lr5 when photo is transferred to photo shop

lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lightroom 5 when photo is transferred to photo shop
I am not able to keep the changes made in light room when I transfer to photo shop

Something you need to understand. Unless you are using the latest version of Photoshop Elements, it's possible that some of the adjustments that you make in Lightroom won't transfer to Elements if you choose the option to open anyway. If you choose the option to edit a copy with Lightroom adjustments then Lightroom will create a TIF or PSD file (depending on your preferences), and that file will include all of the adjustments that you have made using Lightroom. Then you can finish your work in Photoshop Elements.
The process of transferring an image from Lightroom to Photoshop or Photoshop Elements involves the Camera Raw plug-in. It has to be used to interpret the Lightroom adjustments and apply those adjustments to the image after it has been converted. Files open in Elements or Photoshop or no longer raw images because those programs are incapable of editing raw image data. I don't know if this will help you in this situation. Feel free to ask if you have more questions.

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English.
[email protected]

'''''What''''' webpage do you have set as your homepage? <br />
Are you saving cookies for that page?

How do you get the Tones tab on iTune so I can load a song on ringtones?

How do I get the Tones tab on iTunes so I can load a song on ringtones? Any instructions on how to add a new ringtone?

I looked into that, and you right.
I will replace the Class.forName() with ClassLoader.loadClass() and instantiate a new ClassLoader everytime I need a new version of an existing class ( up to a limit of, say, 100 times, after which the server will notify the client that it has to be restarted before that class can be updated ).
Now, another question: What happens when I load 10 different versions of "Msg404.class", using different loaders ?
Will the JVM give me the latest version, when I instantiate Msg404.class ?
( That is what I would expect to happen ).
Thanks, Fredrik.
-RUi

How do you customize the interface?

My question: how can I adjust the user interface to bring back just a little of the 3-d effect? Are there files that can be copied back from Mavericks, for instance?
I'm having difficulty using the Yosemite interface just like I do with Windows: there isn't enough information to tell me what's clickable. This "flat" trend takes away the visual affordances that I rely on. I am not the sort who memorizes "where to click" or what all the icon graphics are meant to mean, especially in software that I don't use often. I've almost completely given up using iPads because of interface flatness — it's just easier to go back to pencil-and-paper now that I often can't tell what's interactable and what's just decoration! Apple used to engineer all this so very well, and for me it's sad to see that they're now pursuing trendy looks ahead of functional design.
Note that this is not a question about taste. It's purely about user interface usability. But if you can answer this, it might help the people who have taste-based issues about Yosemite as well.
I won't have much choice about which version of OS X I use either. I'll keep Mavericks on my home computer, but my work computer has to be kept in sync with the institutional norms so Yosemite looks inevitable there.

Thanks for the suggestion, but I am looking for the 3-d contouring that makes clickable things look clickable, as opposed to increasing the contrastiness of it all. I actually find it distractingly jumpy even with contrast low — though there is a chance that I may end up simply getting used to it with time.

How can you have the app tabs positioned to the right of the FireFox button when maximized?

App tabs are '''normally''' positioned to the right of the FireFox button. However, when you shrink the window and then maximize again the app tabs appear below the FireFox button.
Anytime an app tab is open and you maximize, adjust window, maximize, the entire tab bar is bumped down under the FireFox button. Having just regular tabs open does not have this problem as they correctly position themselves to the right of the FireFox button when maximized.

Zero is in the middle where it says "none".

How do you change the New Tab page?

After Yahoo Toolbar stowaway-ed onto my computer, it changed my new tab page to Yahoo search, and I can't change it back.

The default Firefox installation shows a blank page when you open a new Tab, something you installed in Firefox changed that action. You need to figure out what you installed that changed that action to showing yahoo.com and disable that addon.

How do you customize the standard toolbar DW CS4?

I want to add a save all and some other things.
Thanks

Nope... Thanks, but Safe Mode does not do the trick. Oh sure you can move the buttons around and rearrange things to your liking, unfortunately it does not stay that way once you get out of Safe Mode.
I guess if you use an XP machine you are doomed to use FF's interpretation of what it should look like, which is ass backwards from what it has been for the past FIVE YEARS!!! Why not? It seems XP users are now the Freddo's of computing.
Someone should go to you developer's homes move everything around, forks in the basement, beds in the bathroom, TV up in the attic with the mice, dining table outside on the porch, see how you like it.

How do you customize your sync with the new itunes?

How do you customize your sync with the new itunes?

Connect the device
Tap the icon for it towards the top right of the iTunes window
Same as before...
tt2

How do you adjust the font size for the tabs and icons around the screen?

How do you adjust the font size of tabs and and icons to ake them larger?

sfcalling
Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
Please let us know if you are OK with the details.
Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
Adobe Premiere Elements 11 * Creating disc menus
By the way, what computer operating system is your Premiere Elements 12 running on?
Thanks.
ATR

How do I customize the forms to the SharePoint list

I need to customize a form to a SharePoint list that I created in Visual Studio.
After the deploy list, try to customize the EditForm.aspx, NewForm and forms, however when publishing the form of a message that basically says catastrophic error is displayed:
This form is not a standard SharePoint.
How do I customize the forms to the list created?

Hi,
Here is a link which describe how to customize SharePoint list forms using Visual Studio, Please compare it with your code and see if there is any possibility causing the error.
http://www.codeproject.com/Articles/223431/Custom-SharePoint-List-Forms
More important, I’d strongly recommend you using InfoPath Form to custom list form for SharePoint. For your convenience:
http://msdn.microsoft.com/en-us/library/office/aa947697(v=office.15).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How do you reverse the direction of a build in title?

I use Final Cut Pro X, and for a build in title, how would you reverse the direction? For example, One of the build in titles is called "Knock Out", and the words come into the frame away from you, but how do you make the words go the other way, and go towards you?
If you don't understand what I mean, that effect is called "knock out", and you can look at it in your application.
I know how to reverse clips, but that does not work with transitions/title effects
Thank you!

This particular title does not offer many options for customization; in particular, no option for working the other around, as you want.
I can think of a few options for this. The easiest is would be to make the title by itself into a compound clip; but I have just tried it and it does not work, because the blend mode of the text (stencil alpha) does not propagate down inside a compound clip. (If it did, you'd just have to reverse the compound).
Another option is to open a copy in Motion and make changes there. If you have Motion, this will allow you to adjust as you wish.
Yet another easy way may be to "construct" this title yourself right in FCP X.
Insert the "Custom" title, adjust the text font, change the blend mode to Stencil Alpha, and keyframe the scale.

How do you adjust the duration of audio loop?

How do you adjust the duration of the audio loop that you can setup to play in the main menu?

Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

How do you customize toolbar in Numbers 3.0?

How do you customize toolbar in Numbers 3.0?

Hi Rellim,
The Format Inspector > Text has the tools
Regards,
Ian.

Apeture 3, How do you customize the Adjustments tab

Similar Messages

Maybe you are looking for