APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0 (altered)

I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the APEX 3.1.0.00.32 too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Similar Messages

APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0

I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

PreparedStatement.setString doesn't work with Oracle 10g.

Hi all,
I newbie question regarding the method setString of class java.sql.PreparedStatement. My process require to pass throught a file and check agaisnt a Oracle table if the product id of the given record exist in the table .
I use the SQL
select matnr from zncorart_ap where zartleg = ? and zentrleg = ?
to do that. When i try to replace the ? with the setString method it doesn't work and the query always return no row as ? is not a valid value.
Thx for your help.
// Here code snippet of the caller class
public class Inventory2SAP {
private ETLSQL productXRef;
private ResultSet productXRefResult;
private String inRecord;
private String prdCat;
protected void acquireResource() {
try {
// Instantiate product XRef object.
    productXRef = new ETLSQL();
    productXRef.loadDriver(ch.getProperties("Inventory2SAP.JDBCDriver"));
    productXRef.connectDB(true);
    prdXRefLookup = "select matnr from zncorart_ap where zartleg = ? and zentrleg = ?";
    productXRef.createPrepared(prdXRefLookup);
catch (SQLException sqle) {
    sqle.printStackTrace();
    System.exit(-1);
// Loop this method until EOF
protected boolean transform() {
   try {
      productXRef.setString(1, inRecord.substring(0, 8));
      productXRef.setString(2, prdCat);
      productXRefResult = productXRef.executePrepared();
      if (productXRefResult.next()) {
         System.out.println("Nerver branch here because setString doesn't work");
      else {
         System.out.println("Always row not found");
   catch (SQLException sqle) {
      sqle.printStackTrace();
      System.exit(-1);
protected void releaseResource() {
   try {
      productXRef.disconnectDB();
   catch (SQLException sqle) {
      sqle.printStackTrace();
      System.exit(-1);
public class ETLSQL {
    private static Connection con;
    private PreparedStatement pstm;
    private ResultSet rs;
    protected ETLSQL() {
    protected void loadDriver(String driverID) {
       try {
          if (driverID.equals("oracle")) {
             Class.forName(ch.getProperties("OracleDriver")).newInstance();
       catch(ClassNotFoundException cnfe) {
          cnfe.printStackTrace();
          System.exit(-1);
      catch (InstantiationException ie) {
         ie.printStackTrace();
         System.exit(-1);
      catch (IllegalAccessException iae) {
          iae.printStackTrace();
         System.exit(-1);
protected void connectDB(boolean isReadOnly) throws SQLException {
   if (driverID.equals("oracle")) {
      con = DriverManager.getConnection(ch.getProperties("OracleURL"),
      ch.getProperties("OracleUser"), ch.getProperties("OraclePassword"));
    else {
       System.out.println("Can't connect to the Database");
       System.exit(-1);
protected void createPrepared(String SQLString) throws SQLException {
   pstm = con.prepareStatement(SQLString);
protected void setString(int pos, String s) throws SQLException {
   pstm.setString(pos, s);
protected ResultSet executePrepared() throws SQLException {
   rs = pstm.executeQuery();
   return rs;
protected void disconnectDB() throws SQLException {
   if (pstm != null) {
      pstm.close();
   if (!con.isClosed()) {
      con.close();
}

Ever solve this problem? Seems I'm having the same problem. I'm at a bit of a loss.
**** Specifically, I get this
Jan 23, 2007 12:49:51 PM test.JdbcTestHarness doItGood
INFO: ======= doItGood =======
Jan 23, 2007 12:49:52 PM test.JdbcTestHarness doItGood
INFO: It worked...my name is mvalerio
Jan 23, 2007 12:49:52 PM test.JdbcTestHarness doItBad
INFO: ======= doItBad =======
Jan 23, 2007 12:49:52 PM test.JdbcTestHarness doItBad
INFO: It didn't work my name is mud
**** When I do this
package test;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.logging.Level;
import java.util.logging.Logger;
public class JdbcTestHarness {
     private Logger logger = null;
     * @param args
     public static void main(String[] args) {
          JdbcTestHarness jdbcTest = new JdbcTestHarness();
          jdbcTest.doItGood();
          jdbcTest.doItBad();
     public JdbcTestHarness() {
          this.logger = Logger.getLogger("test");
     public void doItGood() {
          logger.log(Level.INFO, "======= doItGood =======");
          Connection conn = null;
          PreparedStatement stmt = null;
          ResultSet rs = null;
          try {
               Class.forName("oracle.jdbc.driver.OracleDriver");
               conn = DriverManager.getConnection(
                         "jdbc:oracle:thin:@db1-dev.lis.state.oh.us:2521:test",
                         "dir", "dir");
               stmt = conn
                         .prepareStatement("select username,password,'true' from account where account.username = 'mvalerio'");
               rs = stmt.executeQuery();
               if (rs.next()) {
                    this.logger.log(Level.INFO, "It worked...my name is "
                              + rs.getString(1));
               } else {
                    this.logger.log(Level.INFO, "It didn't work my name is mud");
          } catch (ClassNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (SQLException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } finally {
               if (conn != null) {
                    try {
                         conn.close();
                    } catch (SQLException e) {
                         // TODO Auto-generated catch block
                         e.printStackTrace();
     public void doItBad() {
          logger.log(Level.INFO, "======= doItBad =======");
          Connection conn = null;
          PreparedStatement stmt = null;
          ResultSet rs = null;
          try {
               Class.forName("oracle.jdbc.driver.OracleDriver");
               conn = DriverManager.getConnection(
                         "jdbc:oracle:thin:@db1-dev.lis.state.oh.us:2521:test",
                         "dir", "dir");
               stmt = conn
                         .prepareStatement("select username,password from account where account.username = ? ");
               stmt.setString(1, "mvalerio");
               rs = stmt.executeQuery();
               if (rs.next()) {
                    this.logger.log(Level.INFO, "It worked...my name is "
                              + rs.getString(1));
               } else {
                    this.logger.log(Level.INFO, "It didn't work my name is mud");
          } catch (ClassNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (SQLException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } finally {
               if (conn != null) {
                    try {
                         conn.close();
                    } catch (SQLException e) {
                         // TODO Auto-generated catch block
                         e.printStackTrace();
Any help would be appriciated.......

Response.sendRedirect doesn't work with IAS 10g

Hello,
I'm moving my application to JDK 1.4 and IAS 10g.
It's alright, but I noticed one problem.
For long operation I created my way to display my "Working in progress..." page.
I create an HTML file into a cache folder and I redirect to that file that reload itself every five seconds.
Once the operation is terminated it change a session variable that is loaded by the HTML page and it ends the "Working in progress..." message.
The problem is that in IAS 10g it doesn't redirect to the HTML file immediately, it seems that "wait" the operation is almost finished: il redirect to the HTML file, and after 5 seconds it loads the end message of the operation.
This is the part of the code:
[WRITE FILE IN c:\application\tools\template\cache as tempxyz.html]
String urlToLoad = "/myApp/tools/template/cache/tempxyz.html";
response.sendRedirect(urlToLoad);
[OPERATIONS]
[CHANGE SESSION VALUE]
-END-
The "response.sendRedirect(urlToLoad);" instruction pass without errors.
I hope I explained my situation.
Thanks in advance for any suggestions,
EP

Thanks Qiang,
Ive done exactly as youve said and it must be a rewriting problem as you suggested. Here is the header from accessing the servlet on the Linux host machine (IP 192.168.5.121 called 'BEAST')
--10:12:27-- http://192.168.5.121:7780/webapp/test
=> `test'
Connecting to 192.168.5.121:7780... connected.
HTTP request sent, awaiting response...
1 HTTP/1.1 302 Moved Temporarily
2 Date: Wed, 11 May 2005 09:12:27 GMT
3 Server: Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server
4 Content-Length: 183
5 Cache-Control: private
6 Location: http://BEAST:7779/webapp/testJ.jsp
7 Keep-Alive: timeout=15, max=100
8 Connection: Keep-Alive
9 Content-Type: application/octet-stream
Location: http://BEAST:7779/webapp/testJ.jsp [following]
--10:12:27-- http://beast:7779/webapp/testJ.jsp
=> `testJ.jsp.3'
Resolving beast... done.
Connecting to beast[127.0.0.1]:7779... connected.
That worked fine. Here is the header on my windows machine on the network ( IP 192.168.5.120) :
HTTP/1.1 302 Moved Temporarily
Date: Wed, 11 May 2005 09:03:21 GMT
Server: Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server
Content-Length: 183
Cache-Control: private
Location: http://BEAST:7779/webapp/testJ.jsp
Keep-Alive: timeout=15, max=100
Connection: Keep-Alive
Content-Type: application/octet-stream
I think the problem must be that the response is telling it to redirect to BEAST (which is the name of the server) but the windows box cant resolve the name. Must be why i get the page cannot be displayed.
The code in the servlet 'test' to redirect is just:
response.sendRedirect("testJ.jsp");
Any ideas would be much appreciated on how I can fix this other than setting up a local DNS server?!
Cheers,
Rob.

Insert Record with Parent/Child Tables doesn't work with Oracle - unlike AC

Hi,
I just Migrated a MS Access 2010 Database to an Oracle 11g Backend with the SQL Developer Tool.
The Migration went fine, all the Tables and Views are migrated.
I'm working with MS Access as Frontend.
The application has some Datasheets with Subdatasheets with Parent/Child Relationship. (1-n Relationship)
After changing to Oracle, it's not possible, to Insert a new Record in a Subdatasheet I always get the following Error Message:
"The Microsoft Access database engine cannot find a record in the table 'xxxx' with key matching field(s) 'zzzzz'"
It used to work perfect with the MS Access Backend, do I need a trigger which first adds the child Record ?
Or what should I do?
Thank you

Hi Klaus,
Thanks for your answer. I still haven't solved my problem. The only way would be to use a singel 1:n Relationship, but in fact I need a n:m Relationship.
I tried the same scenario with a new Access Application, same result.
To clearify my problem.
Goal: Parent Form with Parent Records, Linked Child Form with Child Records in a Datasheet View => Insert of a NEW Child Record.
I have 3 Tables (table1 = Parent tabel, table2 = Child Table, table12 = n:m Tabel with PK and two FK)
The Recordsource of the Parent Form is Tabel1
The Recordsource of the Child Form is Table2 joined with Table12.
In my Old Access Project, Access Triggered the Insert and filled Table12 with the NEW PK of Table2.
It seems like Access can't do that anymore....
I'm pretty desperate and I'm sure it is just a litte thing to fix.....

Web Cache doesn't work with Oracle Enterprise Manager

In my Oracle 9i Application Server Release 2 since I have changed the administrator and invalidator password in the Web Cache Manager the Web Cache appears as unavailable in the Oracle Enterprise Manager, but it's working!! Any idea?

You have to modify the password manually in OEM's target.xml.

Quck Find/Replace doesn't work with Oracle Db Proj (ODT 11.1.0.5.10 beta)

There seems to be a bug with the Oracle Database Project that prevents Quick Find and Quick Replace from working. To recreate, just open the new Oracle Database Project, open a sql script, ctrl-F, search for a text string. The text will not be found.

I guess the work around (not so ideal) is to use Find in Files (shift/ctrl-F) and Replace in Files (shift/ctrl-H).

SetRollbackOnly() doesn't work with Oracle

Hi all,
I'm using an Oracle database and Weblogic server. However, when I execute the following code (which is contained within an ejb session bean method):
// Lookup datasource
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup(DATASOURCE);
connection = ds.getConnection();
// Insert some data
connection.createStatement().executeUpdate("some insert statement");
// Rollback the insert statement
sessionContext.setRollbackOnly()... the insert statement is not rolled back even though I explicitly call setRollbackOnly().
Could anyone help?

Transaction attribute for the method is 'Required'.
Any suggestions...?

Apex 4.2 pre-prod Theme 50 doesn't work with BlackBerry 6.0

The theme 50 in the pre-pod 4.2 on apex.oracle.com doesn't work with BlackBerry version 6.0. Input fields turn black with black when they get focus
This is a Jquery Mobile bug.
See
http://stackoverflow.com/questions/11870842/how-to-fix-a-blackberry-browser-input-from-going-black-on-focus
https://github.com/jquery/jquery-mobile/issues/4828
https://github.com/jquery/jquery-mobile/issues/4836
Any chance of implementing a work around or patching JQM?

Putting the second suggestion at Stack Overflow into the in-line CSS seems to have done the trick.
.ui-btn.ui-focus, .ui-input-text.ui-focus, ui-input-search.ui-focus {
outline: none;
-webkit-box-shadow: none;
There is still an issue that when a link is selected it show the same behaviour but that's more liveable with and I haven't given up hope of finding the class which is causing it.
The JQM guys look like they have a solution too but I couldn't work out which version it would be applied to.

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0 (altered)

Similar Messages

Maybe you are looking for