Apex 3.1 upgrade on 11g - Where do I copy the images to?

Hi Everyone,
I've just installed Oracle 11g Personal Edition on my laptop, I have successfully configured Apex 3.0 and am now trying to finish off the upgrade to 3.1
(We are unable to upgrade to 3.1.2 yet, however this is scheduled for early in the new year - until this time we must continue to use 3.1)
I have run the install/upgrade to 3.1 successfully and have enabled the network services in 11g.
However I am getting stuck on copying the images over,
the documentation it says to copy into the ORACLE_HTTPSERVER_HOME\ohs\images directory
I cant find where my ORACLE_HTTPSERVER_HOME is set - can anyone please help to point me in the right direction
I have tried to search for the folder ohs on my hard drive, but can only find a folder called ohs_images
(C:\app\oracle\product\11.1.0\db_1\oc4j\j2ee\home\default-web-app\ohs_images)
Thanks in advance for your help.
Kind Regards, Michelle

Hi Varad,
Thanks for your prompt response.
I have run the apsldiimg.sql script to update the images directory - however it still does not seem to want to work for me! :)
When I run the script in SQL*Plus I get the following results
SQL> @apxldimg.sql C:/ApexUpgrade
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:/ApexUpgrade/apex/images'
Directory created.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:02:35.39
Directory dropped.
SQL>
When I go to logon to Apex, either in the Admin or Workspace areas I am unable to login.
The page displays but the normal login images aren't displayed.
Thanks, Michelle

Similar Messages

I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

As TD pointed out:
OT

Where can I find the Lion 10.7.0 upgrade to download, Where can I find the Lion 10.7.0 upgrade to download

I need to upgrade from Snow Leopard to Lion, so where can I find the Lion 10.7.0 download?

You have to call Apple to buy a download code: 800-MY-APPLE in the US.

I am trying to home share with my sister. I have it down to where I can copy the songs, but I just don't have the "import" button. So it won't allow me to do anything with the songs from her computer. What should I do now?

I am trying to home share with my sister. I have it down to where I can copy all the songs I want, but it won't allow me to import them because my iTunes doesn't show the "import" button at the bottom. So what do I do now?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

Where do I find the image resolution in iPhoto '09

Where do I look in iPhoto '09 to find the resolution of a photo?

Are you referring to the "dpi" setting for the image? That's not relevant until you set a print size. DPI is dots per inch so you need to divide the width of the image in pixels (dots) by the width of the print (inches) to get the resolution of that print.
This will give you more info on that: The Myth of DPI.
Many cameras will set the dpi in the metadata at 180 dpi. iPhoto changes it to 72 dpi as that's generally the screen resolution of many monitors. But as described above it's meaningless until you go to print the image.
OT

Upgrade to 11g - DBUA can't retrieve the version

Hello,
I'm upgrading 10.2.0.4 version to 11.2.0.2 and I have problem at the beginning.
Immediately after the start of DBUA in the I get the error, that the version of the database can' be retrieved. Somewhere in the logs I have found:
connect /****** as SYSDBA
set echo off;
@/u01/app/oracle/OracleHomes/db11g/rdbms/admin/rdbmsup.sql;
exactly at this point I have big understanding problem.
It looks like the new software wants to connect to the instance and can't. What should I do to allow it to do that? I have started the new(11g) listener and it it possible to connect to the old 10g instance, but the old instance runs in the old home. I can connect to it, but I must use the tnsname "emrep". Without using the tnsname it connects to the idle instance.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> conn sys@emrep as sysdba
Enter password:
Connected.
Probably I have made some mistake during configuration of the listener, but I can't find any guidance in this direction. At all places where I'm looking I see only: "create new listener using netca and add the database in the Database Services tab for this listener using netmgr". Actually there is no need to do the last because tha databse is using the default port 1521.
If I do only that, the I get in $ORACLE_HOME/networt/admin folder only listener.ora with the following contents:
# listener.ora Network Configuration File: /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = mmredora.aegon-net.de)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
After that I see the databse registered with the listener:
[oracle@mmredora-SID:emrep]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-SEP-2011 15:38:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mmredora.aegon-net.de)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-SEP-2011 15:34:19
Uptime 0 days 0 hr. 4 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/mmredora/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mmredora.aegon-net.de)(PORT=1521)))
Services Summary...
Service "emrep" has 1 instance(s).
Instance "emrep", status READY, has 1 handler(s) for this service...
The command completed successfully
Can somebody help me with that?

"could not get the database version from the "Oracle Server" component. The "CEP" file "/u01/app/oracle/OracleHomes/db11g/rdbms/admin/rdbmsup.sql" does not provide the version directive."
but I have found some other problem.
in rdbmsup.sql I found:
SELECT version INTO inst_version FROM v$instance;
vers := SUBSTR(inst_version,1,6); -- three digits
ptch_version := SUBSTR(inst_version,1,8); -- four digits (patch release)
IF (vers = '9.2.0' AND
SUBSTR(ptch_version,1,8) = '9.2.0.8') OR
(vers = '10.1.0' AND
SUBSTR(ptch_version,1,8) = '10.1.0.5') OR
(vers = '10.2.0' AND
SUBSTR(ptch_version,1,8) != '10.2.0.1') OR
(vers IN ('11.1.0','11.2.0')) THEN
NULL; -- is a supported version
ELSE
-- version is some unsupported version
DBMS_OUTPUT.PUT_LINE('ODMA_DIRECTIVE:EXIT:NOT_INSTALLED:');
RETURN;
END IF;
I have executed
SELECT version INTO inst_version FROM v$instance;
from sqlplus connecting to the old instance using a "tnsname" and get version 10.1.0.4, not "10.2.0.4" as it is in my papers. now I'm making upgrade to 10.1.0.5
But it still bothers me: this "connect /****** as SYSDBA"! The text of the message sounds like "not possible to retrieve the version at all" - not that it is an unsupported version.

I have a powerbook g4 i want to upgrade to leopard where can i get the free download from ?

i would like to know where to get a free download of leopard for my powerbook g4 can someone help thank you

There is no free download of Leopard. Any offered on the internet are illegal pirated copies; reports here from people who tried them indicate that either they don't work or come with malware and misery.
We don't know where you are located but, if in the US, you can phone the Apple Store at 1-800-MY-APPLE and ask for an operating system specialists. Ask if they have copies. Some people--not all--have been able to get 10.5 that way at a modest cost.
If they say no, you must buy it on the open market and some people are selling vaild and proper Leopard install disk sets for as much as many G4 PowerBooks are worth on the used market.

Where did I found the images in Finder?

For a while ago, I found some images in Finder of, among others; iPad, iMac Unibody, some MacBooks, etc. Now, I can't remember where I found them. Does anyone have experienced the same, and can tell me where in Finder they are?

You may have found them in the Resources folder of the CoreTypes.bundle. Take a look here:
/System/Library/CoreServices/CoreTypes.bundle
Then right click on the bundle and select "Show Package Contents" and continue burrowing down. There are lots of icns graphics files for apple hardware. They will open in Preview when double clicked and you can resave them as jpegs to use somewhere else.
Francine
Francine
Schwieder

Where should I store the image file?

I registered a schema, created a table, then inserted a XML file which contains following lines
<material>
<matimage imagtype="image/gif" uri="image2.gif">
</matimage>
</material>
My question is where should I store this image2.gif so it can be displayed when my application retrieve this XML file?
Thanks,

In the XML DB repository.. See dbms_xdb.createResource().

Ecommerce - photo gallery where you can buy the images

A photographer client would like to upload the days photo shoot as a batch (approx 100 images) to create a gallery.
They can already do this with the photo gallery module.
But then is it possible...
For customers to view and select (tick box next to image) which photo(s) they would like to purchase and add this to the shopping cart and pay.
Does any one please know if this is possible please and how it could be done?
Similar to this - http://ecommerceadd.photobiz.com/?load/event_gallery/event/89415/item/116428/page/100094/a utoplay/0/start/all
Thank you

Hi Gongy2,
You can use software to do it like Photography Orders http://www.photographyorders.com
Other software you can use to do the same thing is PhotoCart, PhotoShelter, RedCart, and there are quite a few others as well
Cheers,
Luke

Where do I find the images in the keynote templates

Hello,
I would like to use some of the images in the Keynote (Pages) templates for another project. Are these images installed somewhere on my computer and licensed for other uses? In my case, I'd like to use some of those images on my website.
Thanks for your insights.
Regards,
Ramone

Hi,
In the preview portal seems no way to
use your own image create VM, thanks.
| SQL PASS Taiwan Page |
SQL PASS Taiwan Group
|
My Blog

Where should I copy the "libflashplayer.so" in order to make the plugin work?

Hello, I run on unbuntu 10.10. I've recently downloaded firefox 4 and it works fine, except the fact that it can't find the flashplayer plugin already installed. How can I make it work, by copying the libflashplayer.so in the proper directory for instance?

A possibility is to create a plugins folder in the Firefox installation folder and place a symlink to the Flash plugin file libflashplayer.so in that folder.
See also:
*http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

HELP: need to re-do APEX 3.2 upgrade

hi -- You've probably seen my recent posts regarding confirming that we're actually in a 3.2 development environment after the upgrade. I (developer) found out today from the DBA who did the install that he only ran apxrtin.sql (runtime installation) whereas we need the full development installation. Furthermore, when I checked the APEX status in dba_registry, it is UPGRADING (not valid). Almost all of the wwv_flow% packages are invalid. After doing some reading, here's what I think I need to do to re-do the upgrade from 3.0.1. Can someone please confirm?? I'm not a DBA (our DBA is not available right now), this needs to get done, and I'd like to have some reassurance that I won't do something I'll regret! (thanks).
- Shutdown all other instances on the server
- Backup the DB
- Start instance to hold APEX, but w/o listener running
Revert to 3.0.1:
- images directory from 3.2 was not copied, so nothing to do there...
- in sqlplus:
ALTER SESSION SET CURRENT_SCHEMA = FLOWS_030000;
exec flows_030000.wwv_flow_upgrade.switch_schemas
('APEX_030200','FLOWS_030000');
DROP USER APEX_030200 CASCADE;
(Is this all to do the revert and clear out 3.2? Maybe I should go ahead and shut down the http server...)
Re-do the 3.2 upgrade
- We're running oracle 10.2.0, and upgrading, so I assume we don't need to configure the PL/SQL gateway. I know we can currently connect
to our HTTP server and access the 3.0.1 development environment.
- run apexins.sql
- restart listener and other processes
- copy the images directory
I think this is it... Am I right?
Thanks SO much!
Carol

Print to the Adobe PDF printer or use PDF Maker from within WORD. Of course, this assumes you own a license for Acrobat and have installed it.

Broken image links on APEX 3.0 in Oracle 10g XE? Here's the solution

You're on Oracle 10g XE and you've just upgraded your APEX from 2.0 to 3.0. You log into APEX Admin and there's tons of broken image links. You look into the Oracle documentation for APEX and it instructs you to copy the Images folder into your htmldb directory if you're using Oracle 10g standard, etc. But you're using Oracle 10g XE and there is no Images folder anywhere to be seen!
HERE'S THE SOLUTION:
http://daust.blogspot.com/2006/03/where-are-images-of-application.html
Excerpt from the website:
In OracleXE these resources (Images) are stored directly in the database, using the Oracle XMLDB feature. You can access the resources and modify them directly by using the WebDAV feature of the XMLDB.
(1) With Internet Explorer, just go to File > Open > http://127.0.0.1:8080/i (check "open as webfolder")
Then, copy the contents of your apex/images folder into this webfolder. It will take about 10 minutes. When it's done, refresh your Apex 3.0 website and lo and behold! Images! :)
Be sure to thank Dietmar Aust for his solution to this problem, provided on his website: http://daust.blogspot.com/2006/03/where-are-images-of-application.html

Another option: Try the Oracle Database XE and Application Express 3.0.1 install guide.
C.

Iphone 4s with upgrade to ios 6, why are the images I save "save photo" not in my camera roll?

I have an iphone 4s upgraded with ios 6. Why are the images I save "save photo" not in my camera roll? Where do they go?
Thx,
surfin steve

Hey, I just had this problem, I went into Settings -> Privacy-> Facebook (which is where I was saving photos from) -> turned it on, then back to settings -> Facebook-> and logged in. When I went back to Facebook and saved a photo and it saved to my camera roll. I haven't tried it with anything else yet though. Hope this helps!

Apex 3.1 upgrade on 11g - Where do I copy the images to?

Similar Messages

Maybe you are looking for