Apex 3.2 on 11g with EPG on Localhost - IE 8 browser running very slow.
I've just upgraded my development DB to 11gV2 but can't cut over to APEX4.0 yet as the production environment still needs to be upgraded(backward compatibility issues).
New SETUP
APEX 3.2
11g setup on localhost
EPG
IE8 runs very very slow
Firefox runs fine with acceptable speed
Old Setup
APEX 3.2
10g on localhost
HTTP server
IE7 run fine
Firefox ran fine
Any suggestions on how to speed up IE8 as it is our prefered browser?
I've tried to set TOOLS...INTERNET OPTIONS...ADVANCED...http1.1 settings on and off as suggested by someone on the forum but the results are unpredicitble.
Paul P
Hello Paul,
I think we are now in a similiar situation as you had a year ago, and I was wondering if you could provide me with some insight.
We are currently running on 10g with Apex 3.2.1 and are working on upgrading to 11g, and not upgrading Apex (staying at 3.2).
Did you run into any issues when upgrading to 11g? Did anything need to be done on the Apex side to support it? Or are they totally independent?
Thanks!
Annie
Similar Messages
-
what files are safe to put in the trash without messing up programs?
It would be wise to move your large libraries like your iPhoto, Aperture, Lightroom etc, iTunes, iMoves to an external HD. That will free up HD space. After you have relocated those libraries move the copies on the internal HD to the trash and empty the trash. This is the smartest and safest method. Apple explains how to move these libraries in:
iPhoto: How to move the Library to an EHD
iTunes: How to move the library to an EHD
iMovie: How to move the Library to an EHD -
Applet with JDBC runs very slow
I have recently created an applet which I am using to interface with a MS SQL Server 2000 database using JDBC. The server is running W2K Server, and a Tomcat web server.
There are some performance problems with this application. The volume of data being demanded by the database is very low, yet it runs very slow. More specifically, however, the application runs at a very fast pace for several seconds, then "stalls" for 10 -15 seconds.
The stalling of the application does not take place at the same place in the code all the time; rather it seems to be completely independent of what I am doing. Sometimes a particular operation takes 20 seconds to complete, but the next day the same thing only takes 20msec.
Any ideas?
Thankssounds like network usage issues
hard to tell with no code and no idea how you're configured -
My MacBook is running very slow and the wheel is constantly spinning. It's not just using the internet as it takes forever to start, open programs, etc. It is even taking me a long time to type in this question as the spinning wheel keeps coming up. Below is the EtreCheck. I would appreciate it if someone could please help me!
EtreCheck version: 1.9.15 (52)
Report generated September 7, 2014 at 11:30:33 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 5:3:7
Disk Information: ?
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (425.17 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[running] com.sony.SonyAutoLauncher.agent.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
3% WindowServer
0% mdworker
0% Microsoft Excel
0% aosnotifyd
Top Processes by Memory: ?
115 MB Microsoft Excel
115 MB Safari
70 MB Mail
68 MB com.apple.WebKit.WebContent
66 MB com.apple.IconServicesAgent
Virtual Memory Information: ?
1.71 GB Free RAM
1.46 GB Active RAM
161 MB Inactive RAM
685 MB Wired RAM
353 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help
wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating? -
Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.It mainly seems to be with games.
RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan -
Jdev 11g application is running very slow.
Hi,
I have deployed the application on Solaris OS, Weblogic 10.3.2 and JDev 11g.
Application is running very slow, means each page is taking time to launch.
Server setup is as follows:
8 cpu's
6gb of memory
8gb swap
15gb /apps
20gb /logs
Please let me know if I need to set any parameters at server level to improve the application performance.
Thanks.Oh, yes, of course, your /logs partition should be 22.25 GB instead of 20 ;) (that was a joke before you run off and ask for more space)
To amplify what Timo said, you've provided actually no information whatsoever that would help anyone even begin to know what is causing the performance problem. Have you looked at the EM screens? Have you turned on logging to see if it's the database perhaps? You need to do much more diagnosis.
John -
Here are my components on computer...
Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
I hvae Adobe premier CS6...
Thank you guys!Here are my components on computer...
Even with small project, my processor is start running very high and everything in program runs very slowly, which component is the worst, what shuld i change?
I hvae Adobe premier CS6...
Thank you guys! -
i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
raghav sharma wrote:
i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
Try This...
Close All Open Apps... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad
Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
Have you tried a reset on the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Memory full with nothing running, very slow
Our macbook suddenly started running very slow and having programs freeze a lot after a partial migration form a power PC G5. In short it happens in two different accounts. Activity monitor shows the cpu is not doing much (idle > 70%) but the memory is very full even when only activity monitor has launched.
Is it right for activity monitor to be showing almost all of the 1 GB used (0.78GB) immediately after a restart with only activity monitor running (see image). I don't know what most of these things are. CPU usages was very low. launch program takes a long time, switching between programs, pretty much anything between programs, saving, or launching. Also programs (at least firefox and power point which I use alot) freeze frquently. (What I have tried is listed below). Yes I have ordered more memory but that doesn't address the issue that this was working fine before. Once much is launched the memory use is essentially 100%
The cause: macbook had been working fine with several user accouts and normal operation. We had used it since "mid 2007". Our old G5 is dying (video card I believe). So I did a partial migration using the firewire migrate in the OS. I migrated my account and then separately migrated some of the applicaitons. I also started using Outlook and set up all my email accounts in it. What should the activity look like?
0
Tried: repair disk - no problems The HD was replaced 12/12/2008, repaired disk permisions
reinstall snow_leapard from original disk 10.6.3 - same symptoms, updated through software update to 10.6.8 - no change.
not much on login launch. other account has less and also slow.Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate. -
Having trouble with the iOS 8.1.1 download. Very slow. Just keeps saying preparing update for about 4 hours now. Help
Hello there, Cmm405.
If you're updating your iPad with an over-the-air iOS update, the following Knowledge Base article offers up some practical steps for troubleshooting some of the issues that can arise:
Resolve issues with an over-the-air iOS update - Apple Support
In your instance, these sections may prove particularly useful:
Download takes a long time, or you can't reach update server
iOS updates require a persistent Internet connection, and the time it takes to download the update will vary according to the size of the update and your Internet speed. You can use your device normally while downloading the iOS update, and iOS will notify you when you can install the update. To improve the speed of the download, avoid downloading other content.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Recently my IMac with osx 10.4.11 has been running extremely slow. It takes forever for Safari to switch screens. You can hear the computer constantly working. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?
First remove the antivirus software, it's possible that could be part of your problem! Slow Mac's can be caused by many different issues, including failing HD's, a HD that is too full (OS X really likes to have about 10-15% of the HD available), insufficient RAM, etc.. To troubleshoot your problem I'd recommend looking over 25 Ways to Speed Up Your Mac.
-
Forms 11g with Webutil don´t show in browser IE 9
Hi people,
I have a problem with Webutil. I installed th Oracle Forms/Reports 11g in Red Hat 5.5 x86_64, and when is necessary run a pure Forms, it´s works.
Now, when I will try run a Forms with Webutil, don´t show in browser IE 9 - Win 7 64bits - Java Plug-in 1.6.0_25 Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client.
What can be to show only a gray screen and dont show my Forms ? In java console don´t showed any error, neither in WLS_FORMS.log and forms-diagnost.log.
My files (cfg and env) configuration is below (sorry by excess of information, but I believe the more information better):
=========================================
File Located
=========================================
webutil.pll in $FORMS_PATH
webutil.plx in $FORMS_PATH
webutil.olb in $FORMS_PATH
frmwebutil.jar $ORACLE_HOME/forms/java
frmall.jar $ORACLE_HOME/forms/java
jacob.jar $ORACLE_HOME/forms/java
forms_base_ie.js $ORACLE_HOME/forms/java
forms_ie.js $ORACLE_HOME/forms/java
jacob.dll $ORACLE_HOME/forms/webutil/
ffisamp.dll $ORACLE_HOME/forms/webutil/
d2kwut60.dll $ORACLE_HOME/forms/webutil/
JNIsharedstubs.dll $ORACLE_HOME/forms/webutil/
webutil.cfg $ORACLE_INSTANCE/config/FormsComponent/forms/server/
webutilbase.htm $ORACLE_INSTANCE/config/FormsComponent/forms/server
webutiljini.htm $ORACLE_INSTANCE/config/FormsComponent/forms/server
webutiljpi.htm $ORACLE_INSTANCE/config/FormsComponent/forms/server
=========================================
Java Console Information
=========================================
basic: Starting applet teardown
basic: Finished applet teardown
basic: Starting applet teardown
basic: Finished applet teardown
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@88d319
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmwebutil.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/jacob.jar
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 270461 us, pluginInit dt 1187686126 us, TotalTime: 1187956587 us
RegisterWebUtil - Loading WebUtil Version 11.1.1.4
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@88d319
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Applet started
basic: Told clients applet is started
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1b06a21
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmall.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/frmwebutil.jar
basic: Plugin2ClassLoader.addURL parent called for http://machine01.br.job.com:8002/forms/java/jacob.jar
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 270461 us, pluginInit dt 1187728773 us, TotalTime: 1187999234 us
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1b06a21
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/splash.gif
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/oracle_logo.gif
basic: Loaded image: jar:http://machine01.br.job.com:8002/forms/java/frmall.jar!/oracle/forms/icons/bgnd.gif
Forms Session ID is formsapp.14
network: Cache entry not found [url: http://machine01.br.job.com:8002/forms/registry/oracle/forms/registry/default.dat, version: null]
network: Connecting http://machine01.br.job.com:8002/forms/registry/oracle/forms/registry/default.dat with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/ with proxy=DIRECT
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
network: Connecting http://machine01.br.job.com:8002/forms/frmservlet?config=flash&ifsessid=formsapp.14&acceptLanguage=en-US&ifcmd=startsession&iflocale=en-US with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756?ifcmd=getinfo&ifhost=Mxxxx&ifip=10.xx.xx.xxx with proxy=DIRECT
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
Forms Applet version is 11.1.1.4
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
2011-Aug-26 18:00:31.823 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.832 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.837 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.841 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.849 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.854 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.858 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.864 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2011-Aug-26 18:00:31.869 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..
2011-Aug-26 18:00:31.870 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2011-Aug-26 18:00:31.870 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2011-Aug-26 18:00:31.871 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2011-Aug-26 18:00:31.872 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2011-Aug-26 18:00:31.872 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2011-Aug-26 18:00:31.872 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2011-Aug-26 18:00:32.16 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
network: Connecting http://machine01.br.job.com:8002/forms/lservlet;jsessionid=1scsTYJcjSTg2LR7JTqXv9gq9bWvRJbLzWt1FTFrk2rcp2qrGNHL!1640610756 with proxy=DIRECT
basic: Applet started
basic: Told clients applet is started
Dumping class loader cache...
Live entry: key=http://machine01.br.job.com:8002/forms/java/,frmall.jar,frmwebutil.jar,jacob.jar, refCount=1, threadGroup=sun.plugin2.applet.Applet2ThreadGroup[name=http://machine01.br.job.com:8002/forms/java/-threadGroup,maxpri=4]
Live entry: key=http://machine01.br.job.com:8002/forms/java/,frmall.jar,frmall.jar,frmwebutil.jar,jacob.jar, refCount=1, threadGroup=sun.plugin2.applet.Applet2ThreadGroup[name=http://machine01.br.job.com:8002/forms/java/-threadGroup,maxpri=4]
Done.
! ======== This information above is show when I execute the forms in IE 9 ======== !
! ========Below information about the JRE Plugin ======== !
Dump system properties ...
======== ======== ======== ========
__jvm_launched = 109763333269
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows 7 6.1)
http.auth.serializeRequests = true
https.protocols = TLSv1,SSLv3
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\\PROGRA~2\\Java\\jre6\\classes
java.class.version = 50.0
java.class.version.applet = true
java.endorsed.dirs = C:\Program Files (x86)\Java\jre6\lib\endorsed
java.ext.dirs = C:\Program Files (x86)\Java\jre6\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home = C:\Program Files (x86)\Java\jre6
java.io.tmpdir = C:\Users\users-dir\AppData\Local\Temp\
java.library.path = C:\Program Files (x86)\Java\jre6\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files (x86)\Internet Explorer;;C:\Program Files (x86)\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_27\bin;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;
java.protocol.handler.pkgs = sun.plugin.net.protocol|com.sun.deploy.net.protocol
java.rmi.server.RMIClassLoaderSpi = sun.plugin2.applet.JNLP2RMIClassLoaderSpi
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.6.0_25-b04
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.6.0_25
java.version.applet = true
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 20.0-b11
javaplugin.nodotversion = 160_25
javaplugin.version = 1.6.0_25
javaplugin.vm.options =
javawebstart.version = javaws-1.6.0_25
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows 7
os.name.applet = true
os.version = 6.1
os.version.applet = true
package.restrict.access.com.sun.deploy = true
package.restrict.access.netscape = false
package.restrict.access.org.mozilla.jss = true
package.restrict.access.sun = true
package.restrict.definition.com.sun.deploy = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.org.mozilla.jss = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.awt.warmup = true
sun.boot.class.path = C:\Program Files (x86)\Java\jre6\lib\resources.jar;C:\Program Files (x86)\Java\jre6\lib\rt.jar;C:\Program Files (x86)\Java\jre6\lib\sunrsasign.jar;C:\Program Files (x86)\Java\jre6\lib\jsse.jar;C:\Program Files (x86)\Java\jre6\lib\jce.jar;C:\Program Files (x86)\Java\jre6\lib\charsets.jar;C:\Program Files (x86)\Java\jre6\lib\modules\jdk.boot.jar;C:\Program Files (x86)\Java\jre6\classes;C:\\PROGRA~2\\Java\\jre6\\lib\\deploy.jar;C:\\PROGRA~2\\Java\\jre6\\lib\\javaws.jar;C:\\PROGRA~2\\Java\\jre6\\lib\\plugin.jar
sun.boot.library.path = C:\Program Files (x86)\Java\jre6\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.command = sun.plugin2.main.client.PluginMain write_pipe_name=jpi2_pid2480_pipe4,read_pipe_name=jpi2_pid2480_pipe3
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.net.client.defaultConnectTimeout = 120000
sun.net.http.errorstream.enableBuffering = true
sun.os.patch.level = Service Pack 1
sun.plugin2.jvm.args = -D__jvm_launched=109763333269 "-Xbootclasspath/a:C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\deploy.jar;C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\javaws.jar;C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\lib\\\\plugin.jar" "-Djava.class.path=C:\\\\PROGRA~2\\\\Java\\\\jre6\\\\classes" -Dsun.awt.warmup=true --- --
trustProxy = true
user.country = US
user.dir = \\machine-desktop\USERS$\users-dir\Desktop
user.home = C:\Users\users-dir
user.language = en
user.name = users-dir
user.timezone = America/Sao_Paulo
user.variant =
================================
Dump deployment properties ...
================================
deployment.browser.path = C:\Program Files (x86)\Internet Explorer\iexplore.exe
deployment.browser.vm.iexplorer = true
deployment.browser.vm.mozilla = true
deployment.cache.enabled = true
deployment.cache.jarcompression = 0
deployment.cache.max.size = -1
deployment.capture.mime.types = true
deployment.console.startup.mode = SHOW
deployment.control.panel.log = false
deployment.javapi.cache.update = false
deployment.javapi.lifecycle.exception = true
deployment.javapi.log.filename =
deployment.javapi.runtime.type = 0
deployment.javapi.stop.timeout = 200
deployment.javapi.trace.filename =
deployment.javaws.associations = ASK_USER
deployment.javaws.autodownload = PROMPT
deployment.javaws.cache.update = false
deployment.javaws.concurrentDownloads = 4
deployment.javaws.home.jnlp.url = http://java.sun.com/products/javawebstart
deployment.javaws.installURL = http://java.sun.com/products/autodl/j2se
deployment.javaws.logFileName =
deployment.javaws.muffin.max = 256
deployment.javaws.shortcut = ASK_IF_HINTED
deployment.javaws.ssv.enabled = true
deployment.javaws.traceFileName =
deployment.javaws.uninstall.shortcut = false
deployment.javaws.update.timeout = 1500
deployment.javaws.viewer.bounds = 280,272,720,360
deployment.jpi.mode.new = true
deployment.log = true
deployment.max.output.file.size = 10
deployment.max.output.files = 5
deployment.mime.types.use.default = true
deployment.proxy.bypass.local = false
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.repository.askdownloaddialog.show = true
deployment.repository.enabled = true
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.askgrantdialog.notinca = true
deployment.security.askgrantdialog.show = true
deployment.security.authenticator = true
deployment.security.blacklist.check = true
deployment.security.browser.keystore.use = true
deployment.security.clientauth.keystore.auto = true
deployment.security.expired.warning = true
deployment.security.https.warning.show = true
deployment.security.jsse.hostmismatch.warning = true
deployment.security.mixcode = ENABLE
deployment.security.notinca.warning = true
deployment.security.password.cache = true
deployment.security.pretrust.list = true
deployment.security.sandbox.awtwarningwindow = true
deployment.security.sandbox.jnlp.enhanced = true
deployment.security.trusted.policy =
deployment.security.validation.crl = false
deployment.security.validation.ocsp = false
deployment.security.validation.ocsp.publisher = false
deployment.system.cachedir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\SystemCache
deployment.system.security.blacklist = C:\Program Files (x86)\Java\jre6\lib\security\blacklist
deployment.system.security.cacerts = C:\Program Files (x86)\Java\jre6\lib\security\cacerts
deployment.system.security.jssecacerts = C:\Program Files (x86)\Java\jre6\lib\security\jssecacerts
deployment.system.security.oldcacerts = C:\Program Files (x86)\Java\jre6\lib\security\cacerts
deployment.system.security.oldjssecacerts = C:\Program Files (x86)\Java\jre6\lib\security\jssecacerts
deployment.system.security.trusted.certs = C:\Program Files (x86)\Java\jre6\lib\security\trusted.certs
deployment.system.security.trusted.clientauthcerts = C:\Program Files (x86)\Java\jre6\lib\security\trusted.clientcerts
deployment.system.security.trusted.jssecerts = C:\Program Files (x86)\Java\jre6\lib\security\trusted.jssecerts
deployment.system.security.trusted.libraries = C:\Program Files (x86)\Java\jre6\lib\security\trusted.libraries
deployment.system.security.trusted.publishers = C:\Program Files (x86)\Java\jre6\lib\security\trusted.publishers
deployment.system.tray.icon = true
deployment.trace = true
deployment.update.mime.types = true
deployment.user.cachedir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\cache
deployment.user.extdir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\ext
deployment.user.logdir = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\log
deployment.user.security.blacklist = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\blacklist
deployment.user.security.policy = file://C:/Users/users-dir/AppData/LocalLow/Sun/Java/Deployment/security/java.policy
deployment.user.security.saved.credentials = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\auth.dat
deployment.user.security.trusted.cacerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.cacerts
deployment.user.security.trusted.certs = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
deployment.user.security.trusted.clientauthcerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.clientcerts
deployment.user.security.trusted.jssecacerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecacerts
deployment.user.security.trusted.jssecerts = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.jssecerts
deployment.user.security.trusted.libraries = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.libraries
deployment.user.security.trusted.publishers = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\security\trusted.publishers
deployment.user.tmp = C:\Users\users-dir\AppData\LocalLow\Sun\Java\Deployment\tmp
deployment.version = 6.0
java.quick.starter = false
================================
# ================================
# formsweb.cfg -
# ================================
[default]
baseHTML=base.htm
baseHTMLjpi=basejpi.htm
HTMLdelimiter=%
envFile=default.env
escapeparams=true
form=test.fmx
userid=
debug=no
host=
port=
digitSubstitution=context
otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=%ssoProxyConnect%
obr=no
record=
tracegroup=
log=
term=
pageTitle=Oracle Fusion Middleware Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=codebase
width=750
height=600
separateFrame=false
splashScreen=
allowAlertClipboard=true
disableValidateClipboard=false
highContrast=false
background=
lookAndFeel=Oracle
colorScheme=teal
logo=
restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
formsMessageListener=
recordFileName=
serverApp=default
archive=frmall.jar
networkRetries=0
jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
legacy_lifecycle=false
ssoDynamicResourceCreate=false
ssoErrorUrl=
ssoCancelUrl=
ssoMode=false
ssoProxyConnect=no
allow_debug=false
allowNewConnections=true
EndUserMonitoringEnabled=false
EndUserMonitoringURL=
applet_name=
enableJavascriptEvent=true
JavaScriptBlocksHeartBeat=false
[webutil]
allow_debug=false
debug=false
form=WU_TEST_106.fmx
allowNewConnections=false
userid=webutil/webutil@des_tcp.world
WebUtilArchive=frmwebutil.jar,jacob.jar,frmall.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjpi=webutiljpi.htm
archive=
lookAndFeel=oracle
[flash]
HTMLdelimiter=%
envFile=flashwebn.env
escapeparams=true
form=flash/FLASHWEB.fmx
userid=user/password/tns_names
debug=no
host=
port=
digitSubstitution=context
otherparams=obr=%obr% record=%record% tracegroup=%tracegroup% log=%log% term=%term% ssoProxyConnect=%ssoProxyConnect%
obr=no
record=
tracegroup=
log=/tmp/flashweb.log
term=
pageTitle=Oracle Fusion Middleware Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=codebase
width=750
height=600
separateFrame=false
splashScreen=
allowAlertClipboard=true
disableValidateClipboard=false
highContrast=false
background=
colorScheme=teal
logo=
restrictedURLparams=pageTitle,HTMLbodyAttrs,HTMLbeforeForm,HTMLafterForm,log
formsMessageListener=
recordFileName=
serverApp=default
archive=frmall.jar
networkRetries=0
jpi_download_page=http://java.sun.com/products/archive/j2se/6u12/index.html
jpi_classid=clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_12
legacy_lifecycle=false
ssoDynamicResourceCreate=false
ssoErrorUrl=
ssoCancelUrl=
ssoMode=false
ssoProxyConnect=no
allow_debug=false
allowNewConnections=true
EndUserMonitoringEnabled=false
EndUserMonitoringURL=
applet_name=
enableJavascriptEvent=true
JavaScriptBlocksHeartBeat=false
WebUtilArchive=frmall.jar,frmwebutil.jar,jacob.jar
WebUtilLogging=all
WebUtilLoggingDetail=CONSOLE
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjpi=webutiljpi.htm
lookAndFeel=oracle
# ================================
# webutil.cfg - WebUtil default configuration file
# ================================
logging.file=/tmp/webutil.log
logging.enabled=TRUE
logging.errorsonly=TRUE
logging.connections=TRUE
install.syslib.location=/webutil
install.syslib.0.7.1=jacob.dll|106496|1.10.1|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
install.syslib.0.user.1=ffisamp.dll|40960|1.0|true
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=/tmp
transfer.appsrv.accessControl=TRUE
transfer.appsrv.read.1=/tmp
transfer.appsrv.write.1=/tmp
BlockAllowHeartBeat=False
# ================================
# default.env - default Forms environment file, Linux version
# ================================
ORACLE_HOME=/usr/lic/oracle/home/Oracle/Middleware/as
ORACLE_INSTANCE=/usr/lic/oracle/home/Oracle/Middleware/asinst
TNS_ADMIN=/usr/lic/oracle/home/Oracle/Middleware/asinst/config
FORMS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/asinst/FormsComponent/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
WEBUTIL_CONFIG=/usr/lic/oracle/home/Oracle/Middleware/asinst/config/FormsComponent/forms/server/webutil.cfg
FORMS_RESTRICT_ENTER_QUERY=TRUE
CLASSPATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmall.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmwebutil.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/jacob.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/j2ee/frmsrv.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ldapjclnt11.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/debugger.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ewt3.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/share.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/utj.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/zrclient.jar:/usr/lic/oracle/home/Oracle/Middleware/as/reports/jlib/rwrun.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/start_dejvm.jar:/usr/lic/oracle/home/Oracle/Middleware/as/opmn/lib/optic.jar
PATH=/usr/lic/oracle/home/Oracle/Middleware/as/bin:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/bin
LD_LIBRARY_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/lib:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threads
LD_PRELOAD=/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/libjsig.so
# ================================
# flashwebn.env - default Forms environment file, Linux version
# ================================
ORACLE_HOME=/usr/lic/oracle/home/Oracle/Middleware/as
ORACLE_INSTANCE=/usr/lic/oracle/home/Oracle/Middleware/asinst
TNS_ADMIN=/usr/lic/oracle/home/Oracle/Middleware/asinst/config
FORMS_RESTRICT_ENTER_QUERY=TRUE
FORMS_TIMEOUT=120
FORMS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
REPORTS_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/reports
REPORTS_SERVER=rep_wls_reports_machine01_asinst
PATH_REPORTS_CACHE=/tmp/
PATH_REPORTS_LOCAL=/tmp/
WEBUTIL_CONFIG=/usr/lic/oracle/home/Oracle/Middleware/asinst/config/FormsComponent/forms/server/webutil.cfg
FORMS_RESTRICT_ENTER_QUERY=FALSE
FORMS_USERNAME_CASESENSITIVE=1
CLASSPATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmall.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/frmwebutil.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/j2ee/frmsrv.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ldapjclnt11.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/debugger.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/ewt3.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/share.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/utj.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/zrclient.jar:/usr/lic/oracle/home/Oracle/Middleware/as/reports/jlib/rwrun.jar:/usr/lic/oracle/home/Oracle/Middleware/as/jlib/start_dejvm.jar:/usr/lic/oracle/home/Oracle/Middleware/as/opmn/lib/optic.jar:/usr/lic/oracle/home/Oracle/Middleware/as/forms/java/jacob.jar
#PATH=/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash:/usr/lic/oracle/home/Oracle/Middleware/as/forms:/usr/lic/oracle/home/Oracle/Middleware/asinst/FormsComponent/forms:/usr/lic/oracle/home/Oracle/Middleware/as/forms/flash/tool
LD_PRELOAD=/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/libjsig.so:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server/libjvm.so:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threads/libhpi.so
LD_LIBRARY_PATH=/usr/lic/oracle/home/Oracle/Middleware/as/lib:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/server:/usr/lic/oracle/home/Oracle/Middleware/as/jdk/jre/lib/amd64/native_threadsIf you managed to get to the point where the applet container is created (the "gray square"), but the form never appears then you can assume one or more of the following has occurred:
1. The JRE crashed after startup. Many times, but not always, if such a crash occurs it will leave a JRE dump file on the desktop. Its content may help to identify the cause.
2. The Forms runtime crashed at startup. Many times, but not always, a Forms dump file will be created on the server. Its content may help to identify the cause.
3. The Forms runtime was unable to start at all. This can occur on unix systems when/if there is a resource or permissions issue. One of the more common causes is if the file descriptor (nofiles) value is set too low.
4. The applet is actually running, but has attempted to display a dialog box and is awaiting your acknowledgement, but the box was wrongfully sent to the background behind the browser. A similar issue was reported in one of the JRE 1.6.0_xx series, however I don't recall which one. Uninstall your current version and install the latest which is 1.6.0_27
There are other possibilities, but these are most common.
I would recommend the following:
1. Uninstall any JRE older than 1.6.0_27. Reboot. Install 1.6.0_27
2. Set networkRetries=5 in formsweb.cfg
3. Set FORMS_TIMEOUT to 15 (default). Setting to a high value as you have is not recommended and is rarely necessary.
4. Verify that the test form works. For example:
http://machine:port/forms/frmservlet?form=test
5. It appears that you are trying to use WU_TEST_106.fmx. Instead, download an updated version of this file (the name has also changed)
http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/196249.zip
6. Ensure that you have compiled webutil.pll into .plx. Do not use an old version of this file. The installation will include one. If not, check for it in an installation that also includes the Builders.
Maybe you are looking for
-
Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)
Hi there, I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1 When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my deskt
-
Problem using Custom tag in JSP
Iam facing problem when i am deploying my files on j2ee 1.4 server it give following erroer:: my .tld file and jsp are given below any body can help me; mytaglib.tld file: <<?xml version="1.0" encoding="ISO-8859-1" ?> <!DOCTYPE taglib PUBLIC "-//Sun
-
Apple Texas Hold 'em glitches in IOS 8
I know this app has been "discontinued" for a while. Sad because it is a good single player version. One of my favorite time wasters. I had played it to the point where I had won $67 million. Then I upgraded to IOS 8. First I lost all my money and h
-
Event Logs of VMs Migration in Failover Cluster of Hyper-V Hosts
Hello All, We're running Failover Cluster of Hyper-V hosts of Windows Server 2012 R2. Using SCVMM 2012 R2 with UR5 for management. If any host gets down unexpectedly (due to any reason power/bugcheck/hardware failure or what so ever), then the VMs on
-
Why do you have to open the latest Skype client and continuously logs only then exit after 1-2 seconds. The Windows event log the following: Event ID: Description: 100 started Skype update 103 Skype update service is shutting down due to idle timeout