APEX 4.2 Search Application does not work

Why is Search Application in APEX application builder disabled for me? I can type in the search field but the icon to run the search does nothing. This worked fine in 4.0. Tried IE and Firefox.

I don't see an icon to press unless you mean the magnifying glass that proceeds the field. I just type in the search field then press the Enter key and then the search is submitted.

Similar Messages

  • Application does not work properly when I press a CommanButton

    Hi all, I am having a problem with weblogic 10.3.5.
    It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
    But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
    How I can solve these problems?
    Thanks.

    Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
    " http://<our ip>:7001/myApp/faces/index.jspx "
    this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
    But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
    In the Afternoon we gonna give you more information about it .

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • My search function does not work. How can I fix it?

    Hello
    I need help I just bough a macbook 13 inch, with snow leopard
    and the search function does not work.
    The window opens but when I write the name i searh it gives me no results.
    How can i fix it?
    Do i need really to re install all snow leopard?
    thanks
    pt

    Hello paola t & welcome to the forums
    I need help I just bough a macbook 13 inch
    It may be that Spotlight hasn't completed indexing just yet - is there a dot (indicates busy) inside the magnifying icon top right?
    Also, check System Preferences/Spotlight to see what if any exclusions are configured, etc.

  • Mail search function does not work after reinstalling

    Hello!
    I recently had to re-install Leopard on my MacBook Pro.
    I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
    All mails are present, and everything works great, apart from the fact that the search function does not work.
    I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
    What can I do about it ?

    It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
    Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
    Thanks to leonie for some information contained in this.

  • TOC, Search, Index does not work after hosting published files in Multiscreen HTML5

    I have generated and published the files for multiscreen html5. The default screen layout is Desktop_layout. When I access index.htm directly from the published location, every function and all details work beautifully. However, once I host the published files in IIS, and type the URL in Google Chrome, the screen layout is all messed up. TOC, Index, Glossary and the Search function does not work. Please help/suggest/guide.

    Could this be related to IIS? I host it locally on IIS (8.0 on Windows 8.1 Pro) and on Apache without any problems. But IIS can give trouble if the folder security options are not set correctly, so please make sure the IIS User has full read rights on all directories and files.
    Kind regards,
    Willam

  • Firefox 5 search bar does not work.

    I have downloaded firefox 5 and the search feature does not work.

    See:
    * http://kb.mozillazine.org/Unable_to_search_or_add_new_engines

  • HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    Here you go:
    http://support.apple.com/kb/ts1559

  • Mac Lion. Search function does not work in mails.

    Hello,
    I already wasted several hours trying to find solution for a problem which appeared with Lion, search function does not work, in mail at least.
    I was not using Leopard before and I am not a mac expert.
    (search function was already bad in the normal it was already bad in the normal 10.7 set up but at least it was working in mac mails).
    I tried reindexing via spotlight privacy settings (adding and removing HD) but does not work much better.
    I don't want to go to terminal, as as mentioned I don't know enough about mac to try this.
    What to do?
    Thanks,
    C.

    Anyone? Any ideas?

  • BLOB download from report region in translated application does not work

    We created an application (APEX 3.1.2) with a base language dutch (300) and a translated application en-uk (3001). The problem is that in the translated application downloading BLOB's from a report region does not work and results in an error (page cannot be found).
    The query source for the region is:
    select naam
    , dbms_lob.getlength(bestand)
    , mimetype
    from bos_documentatie
    The column 'dbms_lob.getlength(filename)' is defined as a 'BLOB Download Format Mask' with the following setting:
    DOWNLOAD:BOS_DOCUMENTATIE:BESTAND:NAAM::MIMETYPE:FILENAME:::attachment:Open
    The URL's to the BLOB documents are different between the dutch and en-uk application:
    dutch:
    http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125&p=1001&k1=Application Multi Language.doc&k2=&ck=A24A5EA6903C5A9603B86D30F128F4DE&rt=CR
    en-uk:
    http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125.3001&p=1001&k1=Application Multi Language.doc&k2=&ck=7FF0C64FDD48A4D7A6892CFB2B6BCA57&rt=CR
    As you can see the c parameter for the en-uk version has a '.3001' at the end, the internal ID of the translated application. I don't know if this can be the cause of the problem?

    Hi Peter,
    Thanks for the suggestion. However we have a lot of APEX applications build in that same APEX version (one development database) and upgrading now to a higher APEX version would mean we would have to re-test all our applications and upgrade all our test and production environments, just for this bug. And, maybe the higher APEX version may not solve our problem.
    Thanks and regards,
    Patrick

  • Search option does not work in address book

    The search field (upper right corner of window) does not work in address book (version 4.0.5) of my friend's Power Book. I eliminated the possibility of a corrupt plist (preference) file by dragging them to the desktop and restarting but it still didn't help. Any other ideas?
    Meg

    If searching in Spotlight works, I don’t know what could be the problem. You may try this:
    1. Open Address Book.
    2. As an extra safety measure, do File > Back up Address Book and save the backup wherever you wish.
    3. Go to Address Book > Preferences > vCard, set the vCard Format to 3.0 and check Export notes in vCards. Close the Preferences window when done.
    4. Select the All group in the main Address Book window and do File > Export Group vCard (the command should read “Export Group vCard”, not just “Export vCard”).
    5. Quit Address Book, Mail, and any other applications that might use Address Book for something. Or just quit all applications to be on the safe side.
    6. In the Finder, go to ~/Library/Application Support/AddressBook/ and trash any ABPerson.skIndex files you may see there. Open Address Book and check whether the problem is fixed.
    7. If the problem persists, quit Address Book again, in the Finder go to ~/Library/Application Support/, and move the entire AddressBook folder out of there, e.g. to the Desktop (to be deleted after fixing the problem and making sure you don’t miss anything).
    8. Open Address Book and try doing File > Revert to Address Book Backup to restore the backup you made in step 2. If the problem persists, repeat step 7 and this time try doing File > Import > vCards to import the cards exported in step 4.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • Start-mdbs-with-application does not work

    Hi,
    We have a cluster with two managed servers and a JMS server on a migratable target on WLS 10.3.2. We have some MDBs within an EAR module deployed on the cluster. When the managed servers are restarted, WLS produces the following warning:
    <The Message-Driven EJB: LogReceiver is unable to connect to the JMS destination: jms/loggingQueue. The Error was:
    javax.naming.NameNotFoundException: Unable to resolve 'jms.loggingQueue'. Resolved 'jms'; remaining name 'loggingQueue'
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at weblogic.jms.common.CDS$2.run(CDS.java:222)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216)
    at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1295)
    at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1092)
    at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1324)
    at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:480)
    at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    We have configured a System module with a ConnectionFactory on a default targetting and a Queue deployed on the JMS Server. The jndi names for the ConnectionFactory and the Queue have been properly configured.
    Apparently, the container tries to bind the MDBs with their relative destination, but is unable to proceed due to the cluster jndi not having been loaded yet. According to the documentation, we could manage to avoid this early binding by specifying
    <wls:start-mdbs-with-application>true</wls:start-mdbs-with-application>
    in weblogic-application.xml. I tried (also using false, because the documentation is not that clear in this aspect), but without any result. Is there a reason why we cannot manage to have the mdbs connecting later with their destination?
    Also, we got a warning message in the deployment page, claming that the MDBs in the server that is not hosting the JMS server are not connected to their destination. They stuck on state "initializing". While, if we manually resume the connection, via console, the state turns to "Connected". Are these issues correlated somehow?
    Any help will be very much appreciated.
    Thanks in advance,
    - Francesco.

    Hi Francesco,
    From the link below (i.e. Oracle link for WLS-11g) it states that
    “Set to false to defer message processing until after WebLogic Server opens its listen port.”
    Search for: start-mdbs-with-application
    Link-1 http://download.oracle.com/docs/cd/E15523_01/web.1111/e15493/summary.htm
    *# Conclusion:*
    This means that “false” should have resolved your issue but it is not so this might be a bug. Similar bug was seen in WLS-9.2 version which was fixed in WLS-9.2 Mp-1 version check out the link below.
    Search for: CR293982 or CR299012
    Link-2 http://download.oracle.com/docs/cd/E13222_01/wls/docs92/issues/known_resolved.html
    However if it was fixed in WLS 9.2 Mp-1 then the same issue is most probably taken care in WLS 10.x.x version also.
    *# Suggestion:*
    - Try to set “start-mdbs-with-application” as “true” and check if that works for you.
    This is because if you read the “Link-1″ carefully it states that “With default setting of true”, however when you check the “Default” column it shows “false”. Hence cant say which one is default. It might be document bug as well. However you have tried it so you can skip this suggestion.
    *# How to solve this issue:*
    1) Create a simple test case to prove that “start-mdbs-with-application” when set as “false” does not work.
    2) Open a ticket with Oracle and provide all the details with the test case and let them do their job.
    Hope this information helps.
    Regards,
    Ravish Mody

  • Application does not work on firefox 3.5

    If the application is not working in mozilla firefox 3.5 then we are not able to test it in any other browser through this tool.
    What should be the fix for this issue

    Hi Shilpa,
    Can you please provide more details about your configuration and the symptoms of what is not working for you?
    What OS are you using?
    What version of Flash Player do you have installed? (You can find out here: http://kb2.adobe.com/cps/155/tn_15507.html )
    Are you using Firebug and the BrowserLab for Firebug add-on, or are you just using BrowserLab standalone?
    Does BrowserLab work in any other browser for you such as IE or Safari?
    What are the exact steps you are taking and what do you see that you say BrowserLab is not working for you?
    Mark

  • Safari 5.1.1 I no longer have access to my bookmark folders, just a search that does not work well. How can I retrieve access to bookmark folders?

    OS 10.6.8 Safari 5.1.1 I no longer have access to the bookmark folders. There is just a search function that does not work well. Is there any way to get access back to my bookmark folders?

    This site didn't say anything about one wrong ID, but only talks about changing the Apple ID.  If it didn't work the first time why should it work now?

  • Search help does not work when view context is mapped to comp context

    Hello,
    I am trying to display search help for an input field of a view. The context to which the input field is bound is a node with an attribute. I have specified Dictionary Search help for the attribute. Now when I execute the application, I am able to get the search help in the screen.
    But, I  need to map this  view context node to its comp controller context. When I do the mapping, the search help does not appear when executed.
    It would be a great help if someone can point out an answer to this.
    Thanks,
    Maya

    Hi Maya
    Follow these steps:
    1.Delete the context node/attribute which is bound to search help from the View.
    2.Now Save metadata.
    3.Perform Context mapping again .In the Edit Context Mapping window drag the node/attribute FROM RIGHT PANE TO LEFT PANE and select the entry.
    4.Delete the Input Field from the view.
    5.Save again
    6.Close NWDS and reopen it.
    7.Create input field again and bind it to the context element.
    Hope this solves the problem.
    Regards
    Ananda

Maybe you are looking for