ApEx and Apple Mac OS X 10.4.9 / 10.5

Hi All,
Not sure if this is the right forum for this query but I was wondering if the following works fine on the Apple platform (Mac OS X 10.4.9 / 10.5 Leopard):
a) Oracle 10g database (latest version)
b) Oracle Applicatoin Express v3.0
c) SQL Developer
d) SQL*Plus
e) Quest TOAD
Can you also let me know if there are any issues with any of the above products on the Mac platform.
Further if there are any good websites relating the above, could you pls reply back to this thread.
Thanks.
Tony.

Thanks for that. Just wondering if you might have something along the lines of a "how to" approach to get Parallels running the Oracle instance?
There's not much to it, really.
The one thing that you may want to do is set Windows to use a static IP. This way, you can create an alias in your Mac OS X hosts file so that you can refer to the XP instance as a hostname rather than an IP Address.
When installing Oracle on Windows, be sure to release the IP Address if you're going to use DHCP.
Aside from that, it just kinda works.
How does ridges networking benefit you as I have managed to get SQL*Developer connecting my Parallels Oracle instance juts using the IP address as the host name.
I like to treat Oracle on Parallels as nothing more than a server. Thus, I use Mac OS X Tools, such as SQL*Plus & SQL Developer from Mac OS X when doing work. Sure, I'm out of luck if I need TOAD or something Windows-specific, but most of my day-to-day tasks do not require that.
Thanks,
- Scott -

Similar Messages

  • How can I get photos from my IPhone6 to automatically go to my IPad and Apple Mac computer

    How can I get photos to automatically go to my IPad and Apple Mac Computer from my I Phone 6
    Thank you,
    jenjon63

    This article describes the features of "My Photo Stream" and how to set it up in iCloud:
    iCloud: Photo Stream FAQ

  • Cisco wireless and Apple Mac woes

    Hello all,
    I've been working with Cisco wireless and WLC's for a couple of years now but the recent onslaught of Apple Mac's is giving me heart burn.  I've seen this at numerous sites now and need to throw it to eht community for guidance.
    Basically we have had a number of instances where the Macs just fall off the wifi.  Sometimes it's when they wake from sleep and other times when roaming between AP's (1131s with same SSID's).  Our standard install is WPA2 and per ap local authentication.  PC's work fine and never an issue.
    We have completed a survey with a spectrum analyser and no RF interefence is present nor errors on the radio interface.
    Questions:
    - Is there a preferred Cisco config/setup for Mac's to work reliably?  I've heard loads of rumors but nothing concrete and nor can I find anything specific.
    - Should I be setting up WDS in case there is an authenticating issue.
    - For those who are Mac gurus and happen to be reading. What Mac options we should look at?
    This has all come to a head because the clients IT company who recommended the Macs (different from us doing the network infrastructure) are insisting that the problem is Cisco incompatibility and that we should rip out the Cisco kit and install airports (what tha!!!).
    Thanks in advance for any pointers.
    For those who like a config here it is .... Vanilla stuff really
    Building configuration...
    Current configuration : 2236 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname AP4
    no logging console
    enable secret xxxxxxxxxxxxxxxxx
    no aaa new-model
    dot11 syslog
    dot11 ssid Home
       vlan 1
       authentication open
       authentication key-management wpa
       guest-mode
       mbssid guest-mode
       wpa-psk ascii xxxxxxxxxxxx
    dot11 ssid avnet
       vlan 2
       authentication open
       authentication key-management wpa
       mbssid guest-mode
       wpa-psk ascii xxxxxxxxxxxxxxxx
    username abcd password 1234
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption vlan 1 mode ciphers tkip
    encryption vlan 2 mode ciphers tkip
    ssid Home
    mbssid
    speed  basic-1.0 basic-2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
    channel 2412
    station-role root
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio0.2
    encapsulation dot1Q 2
    no ip route-cache
    bridge-group 2
    bridge-group 2 subscriber-loop-control
    bridge-group 2 block-unknown-source
    no bridge-group 2 source-learning
    no bridge-group 2 unicast-flooding
    bridge-group 2 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    hold-queue 80 in
    interface FastEthernet0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface FastEthernet0.2
    encapsulation dot1Q 2
    no ip route-cache
    bridge-group 2
    no bridge-group 2 source-learning
    bridge-group 2 spanning-disabled
    interface BVI1
    ip address 192.168.10.54 255.255.255.0
    no ip route-cache
    ip default-gateway 192.168.10.1
    no ip http server
    no ip http secure-server
    bridge 1 route ip
    line con 0
    line vty 0 4
    login local
    end

    Yeah!! even i have come across multiple issue with MAC and Cisco.. these are the below settings which i normally do on the cisco gears and most of the times this solved the issue..
    on the IOS AP disable Aironet Extentions and set the poer local and ofdm to max
    no dot11 extension aironet
    power local cck max
    power local ofdm max
    end
    On the WLC, disable Aironet IE..
    lemme know if this answered your question..
    Regards
    Surendra
    ====
    Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

  • Elements 9 and Apple Mac Lion - Exit Code 24 on installation

    When trying to install Elements 9 on a new Apple Mac with Lion Server (10.7) , I get the following error:
    Exit Code: 24
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 19 error(s), 0 warning(s)
    ERROR: Set payload canceled status
    ERROR: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action "install" but no resultState
    ERROR: Payload {1A7439BF-B037-4580-9F31-618CCACCC482} has an action "install" but no resultState
    ERROR: Payload {3B332541-D3E1-436D-826E-48520EE14FF4} has an action "install" but no resultState
    ERROR: Payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} has an action "install" but no resultState
    ERROR: Payload {5A60CD44-B38B-47CD-BE38-219C81AE3345} has an action "install" but no resultState
    ERROR: Payload {6A2E619B-E4AC-433B-A648-D458CE543A96} has an action "install" but no resultState
    ERROR: Payload {6F3A624B-1B72-4081-96E8-23261F389C5C} has an action "install" but no resultState
    ERROR: Payload {75063C76-E858-455B-9C26-89E55D26F276} has an action "install" but no resultState
    ERROR: Payload {796659A8-114A-4E16-9994-14DF6A1B1683} has an action "install" but no resultState
    ERROR: Payload {903301C1-EF16-4DF9-880E-BCD8502FA6A6} has an action "install" but no resultState
    ERROR: Payload {A44863BF-8DB8-4D22-88DB-5A02BE319840} has an action "install" but no resultState
    ERROR: Payload {ACEE1B66-83B6-4b2e-888B-38307A3F156B} has an action "install" but no resultState
    ERROR: Payload {BD0D6363-E961-410F-8BF4-ECD8795F3923} has an action "install" but no resultState
    ERROR: Payload {E088661B-6334-4426-A1E0-A3373C9DE657} has an action "install" but no resultState
    ERROR: Payload {F0915E53-C75D-4FF2-ADCB-4D4DB79927F6} has an action "install" but no resultState
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe Player for Embedding: User canceled installation
    ERROR: User cancelled the operation
    This occurs just after it says that it is calculating the time remaining.
    I have enabled JavaScript as per the website, but this does not resolve the issue
    Any help would be appreciated.  Also - how do you get to request Adobe help - have tried almost every page on their website!!

    Click my support at the top of this page.
    Click contact support.
    Select your country or region and click Go.
    Click ask a new question.
    Scroll down to Get Support and choose the technical support tab.
    Choose your issue from the dropdown menu and enter brief details of your problem.
    Submit your request (you will be prompted for your Adobe ID if not logged in)
    Make a note of your case number and await reply - or where available click on-line chat.
     

  • Final cut pro 4 and Apple Mac Pro

    Hi !
    I intend to buy a new Apple Mac Pro 2.66GHz computer.
    Will I be able to work with Final Cut Pro 4 ? and After Effects 6.5 ?
    Can someone please help ?

    FCP 4, not really. You need FCP 5.1.
    AE 6.5 - perhaps. It will run under Rosetta and there has to be a whole bunch of info on tweaking the settings to get it to run reasonably.
    fwiw - Adobe just announced the CS3 suite which will include a UB version of AE. You will likely want to go for that.
    good luck.
    x

  • Iphone 4S and Apple Mac

    I have just purchased an Iphone 4S. When I plug into my Apple Mac the phone is not recognised on Itunes. All I get is an error message saying that the Iphone needs to have Itunes Software version 10.3 or higher. It doesn't recognise the phone to check the software on the Mac.
    If I plug it into my windows laptop then it says that the software is version 6 and that this is up to date.
    Any ideas how I get the phone software to work on the Apple Mac ?

    iTunes 10.6.1 will not sync to an iPhone running iOS 6, as all new iPhones now do. Upgrade to iTunes 10.7 or iTunes 11 and see if that corrects the problem.
    Regards.

  • Bluetooth, N80 and Apple Mac's...

    I am currently unable to use the bluetooth function in boths directions between my phone and my Mac, not for lack of trying....
    I undersdtand that there is a new firmware version that addresses this but I have no idea how to access this.
    I have spoken to the CPW people and they all say "we have not received training as yet so are unable to help, we can send it off to Nokia, but don't expect it back in any time under 2 weeks"...
    There are some other posts in forums that refer to upgrading the firmware yourself, but no specific instructions...
    Anyone?
    If it isn't fun you are doing it wrong
    N95, N80, N73, P990, P910, P900, 6230i, K750i, 8210

    read this for a solution (workaround actually) for bluetooth transferring
    http://discussions.europe.nokia.com/discussions/board/message?board.id=connectivity&message.id=2076#...
    in essence: go to Bluetooth tab in the menu, and select "Browse Device..."
    The rest should be self explanatory.
    As for iSync, check out http://discussions.apple.com/thread.jspa?messageID=1950262숶
    You have to modify the metaclass file, and it works fine... so far
    v 4.0623.0.41, 26-07-2006, RM-92, Nokia N80 (01)

  • N73 and apple mac

    dos anybody no if the n73 works with apple g5 series comps .i was told it would by the dealer but am having no joy at all.any advice would be welcome cheersMessage Edited by river14 on 30-Nov-2006
    08:59 PM

    You can transfer music files and sync your phone via Bluetooth on a Mac with the 6288.
    If you don't have Bluetooth, you could take out the memory card from your phone and transfer music files via a card reader.
    You can get a plugin for the 6288 from here.
    http://www.mactomster.de/isync/
    It's mostly in German, but pretty easy to work out.

  • 3710 fold and Apple Mac OS)_

    For anyone out there who wants to synchronize contacts and calendar between a Nokia 3710 fold and Mac OS X Address Book and iCal, SynchMate (http://mac.eltima.com/) is free for these tasks and works fine. (Apple's iSync doesn't support this phone at present.)
    Unfortunately none of the Nokia software for Mac OS X (e.g. Multimedia Transfer) supports the 3710 fold at present.

    None of the Nokia Software for Windows works properly at the minute either:
    Message
    Just to confirm the additional problems relating to the software on the Nokia 3710 fold (4.30 firmware).
    As part of the diagnostic process, I tried connecting the 3710 to an XP machine  (having previously backed it up, software upgraded and re-installed on a Vista machine).
    The 3710 'connects' on an XP machine, but it cannot sync Messages, Contacts or Photos (in OVI) - strangely it does sync Music - also it cannot 'back-up' in OVI - the OVI software recognises the 3701 as connected, but cannot transfer or back-up data.
    It is the same problem using Nokia PC Suite - the 3710 shows as connected, but cannot be backed up, and the phone contents cannot be displayed - even though the software recognises the phone as 'connected'.
    I tried connecting my old 6131 to the XP machine and PC Suite recognised it immediately, the phone performed a syncronisation without prompting and I was able to view Contacts, Messages (including my Message Folders), Photos and Music (Ringtones) - the 6131 could also be Backed-Up with PC suite on the XP machine.
    OK, so thats another problem to add to the list - the 3710 (S40 Firmware 4.3) software is badly written and doesn't function in many areas, and I've now found that it doesn't work with a Windows XP Machine - even though it should.

  • SMB 3.0 and Apple mac (osx)

    Hello!
    Im thinking about mac and SMB 3.0 today i tested a mac and smb 3,0 and unplug the ethernet cable and the plugged it in again and it wont restart the file transfer
    can you help?

    Hello!
    Im thinking about mac and SMB 3.0 today i tested a mac and smb 3,0 and unplug the ethernet cable and the plugged it in again and it wont restart the file transfer
    can you help?
    You need to have multiple physical uplinks and configured SMB Multichannel to have transparent failover, fault tolerance and redundancy. See:
    SMB Multichannel
    http://blogs.technet.com/b/josebda/archive/2012/06/28/the-basics-of-smb-multichannel-a-feature-of-windows-server-2012-and-smb-3-0.aspx
    Hope this helped :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Adobe Prem Pro and Apple MAC

    Hi
    Can anyone advise which if any versions if any of PP are supported on the MAC platform please, or is it necessary to run the MS operating system on the MAC?
    Thanks

    Cookie,
    Adobe is committed to being a cross-platform company.  Production Premium which includes Premiere is available on the Mac for the same price with the same list of products included as the PC.
    I primarily use Production Premium on my Mac.
    Dennis

  • I have several Windows machines and several Macs ...

    I have several Windows machines and several Macs here at the office, plus the several iPhones ...
    Do you know of an Address Book program for Windows (XP and up) ... so I can manulally (or automatically) import / export contacts from Windows to iCloud, then on to iPhone(s) & Macs ?? ... OR directly transfer files between WinPCs and Apple Mac Address Book.
    I would really like to avoid Win-Outlook, et al and use some third party software for this.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
    Check if there is an update available for your graphics display card driver.
    * Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

  • Install APEX 4.0 on Apple Mac

    Hi,
    Can someone please let me know if it's possible to use an Apple Mac Mini as a dedicated Oracle Apex Server?
    I'm just looking for the simplest way to install Apex on a Mac Mini
    I would ideally like to use OSX operating system but failing that I would be prepared to dual boot the Mac Mini with Windows and install Apex on that.
    Anyway, the OTN website states the following:
    Note: Oracle Application Express 4.0 is supported on all Editions (SE1, SE, EE, and XE)
    of the Oracle database, 10.2.0.3 or higher. Application Express 4.0 can also be used
    with Oracle Database 10g Express Edition. We specifically support the following platforms:
    - Mac OS X ServerThis seems good news. The thing I do not understand is can I install Oracle SE or EE on OSX? I do not believe XE is available on OSX.
    Would I need OSX Server or would OSX Leopard be enough?
    Sorry for all the questions hopefully someone can point me in the right direction.

    You need to concentrate on the steps required for installing Oracle on your Mac OS.
    If you can install Oracle you can install Apex . Apex lives inside the Oracle instance ( if i may say so ). Apex is just a small little bunch ( a few hundred thousand lines ) of pl/sql code in packages, procedures and functions .
    Just go ahead and install Oracle RDBMS, follow the Apex installation step and you will be ok and ready for more Apex "how to" posts ;-)
    Regards,

  • How to connect and use Stor.E TV with Apple Mac

    Hi,
    I just bought the Stor.E tv but I use Apple mac.
    Is there a program that I can download or just some way I can connect my Stor.E to my computer?
    Right now it's locked.
    Thank you :)

    Hi
    Im not quite sure if you could use this since there is no special software for MAC OS leopard.
    But the TOSHIBA StorE TV supports an common USB port and can be connected to the mac/notebook using the common USB plug an play cable
    Maybe the MAC will recognize this external USB device automatically and you will not need to install any software or drivers

  • I have a Apple Mac desktop and recently was unable to access any YouTube, movies, videos, etc because a "Blocked Plug-in" message comes up with no error message. It asks to upload Abode Reader, but upon completion of this the message is the same.

    I have a Apple Mac desktop and recently can no longer access Youtube, videos, movies, etc because I get a message reading "Blocked Plug-in". There's no error message but it does say to upload Abode Flash Player and the problem will be solved. I do this but it doesn't fix the problem. What am I doing wrong?

    if you already downloaded the adobe flash player onto your mac and still getting that message that means you need to finish the installation of the flash player
    you do this by opening a finder window and going to your downloads, find the flash player in here and then double click on it and follow the prompts to complete the installation.
    after this is completed you will need to completely quit out of the web browser you're using then reopen it for the change to take affect and your issue should be resolved. if it's not you need to contact adobe their number is 800 642-3623.

Maybe you are looking for