APEX Interactive Reports - Default number of records

With the new version of APEX (3.1.2) Interface Reports are available. This is a very nice functionalilty.
The problem is that the default number of records are put to 15.
Is it possible to put the default to 1000 for all users?
Thanks for all the input
Toon Schilder

Roel,
Thank you for the quick reply.
The problem is as follows:
In stead of manually updating page for page I would like to update the default of 15 to 1000 for all users for all pages.
Of course if for some reason for one page it should be 500 I can use your method (save to default report settings).
Is there a solution?
Kind regards,
Toon

Similar Messages

Interactive report - default number of rows

I am using APEX 3.1.1 and can not find a way to change the default of 15 for the "number of rows" returned when initially displaying an interactive query. Have I missed something?
It is certainly easy enough using "Layout and Pagination - Number of Rows" for a non-interactive report region.
thanks Peter

Hi Peter,
In the report definition, there is a section headed Default Report Settings. This shows the instruction:
To create default report settings, run the report as a developer, modify the settings (like hiding columns, adding filters, etc.), select Save Report from the Actions Menu and then save As Default Report Settings.
The default row count is one of those settings - make sure you Run the report before saving.
Andy

How to set default number of records shown in report table?

How can I set the default number of records shown in a table report?

This is how report attributes page should look like and there is the number of rows where you enter whatever you need:
http://i44.tinypic.com/es95bn.gif
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

APEX Interactive Report - CSV Export Limitations?

Hello,
I have an interactive report generated for some users.
The issue I'm having right now is that the results that the users need is over 100k and the export to csv option caps out at 65,535 rows. Is this a limitation on APEX Interactive Report's side and is there anyway to get around it so we can send 100k records (or more) to the users without them splitting the report many ways?
Thanks in advance.
Ivan

Ivan,
I'm afraid that I can't answer your question. The APEX insiders will have to field that one.
As one that dislikes voluminous reports, have tried swaying your users that you now have this great interface to drill to the data you need versus downloading gobs of data and filling up their hard drives. Ask if there is something else your application can do that they would do with all that data in Excel.
Jeff

Setting the APEX interactive report items

Hi,
I need to reset the APEX interactive report items like apex_ir_APP_USER to some value.
I put the below jQuery code in the javascript header page it did not work:
<script type="text/javascript">
$document.ready(function() {
$('#apexir_APP_USER').val('NEW VALUE');
</script
Any suggestions ??
Thanks

The reason of me trying to set the apex interactive item is:
For the interactive report, we enabled the subscription service, so that users can subscribe for the selective reports.
So, when a user clicks the Actions button and selects the subscription option, then the couple of fields like email address, subject etc., are populated, with the default values.
The email address field is auto populated with the user id like abc.efg.
And, the email address field i would like to manipulate and change to [email protected]
Now i was able to change the value of the hidden variable, apexir_APP_USER with the below code but when i select subscription option i still see the same user id populated in the
email address field.
<script type="text/javascript">
$(document).ready(function() {
alert('test'+ $("#apexir_APP_USER").val());
$("#apexir_APP_USER").val("Value changed");
alert('changed value '+ $("#apexir_APP_USER").val());
</script>

How to set default number of records shown in an interactive report table?

How can I set the default number of rows shown on an interactive report?
The default seems to be 15, I can't find where this can be changed.

Hi John,
When you're logged into the development interface, run the page with the IR. Set the rows from 15 to 5 (for example) and click "GO". Now click on the Actions Menu icon (the green gear), click "Save Report". "Save as: As default report settings". Click Apply and your rows will be set.
Martin
[http://apex-smb.blogspot.com/]

Link to other pages of rows in APEX Interactive Report

In my Interactive Report I would like to add a way to click on page results other than just clicking the > to advance to the next set of results. I have my rows per page set to 15 by default and would like to keep it that way, but want a way to add links to page 4 or page 5 or page 10 as well. Has anyone done that before, and if so ideas would be greatly appreciated. I need to keep my rows per page to 15 because of parameters I send to another page, so increasing the rows per page is not an option. Thanks.

Hi,
The next button in your pagination fires a javascript function:
gReport.navigate.paginate('pgR_min_row=16max_rows=15rows_fetched=15')
You can create a page button or link containing that javascript function. Replace the number 16 by the rownumber you want to start your result set.
Kind regards,
Vincent Deelen

APEX Interactive Report not shown complete on production system

Hello,
I have a problem with my Apex 4.1.1 application on customers production server.
On our development system (Oracle 11.2.0.3) the Apex IR with the query down below delivers 1.500 rows and the page loading is finished after 3 seconds.
On our customers production system (Oracle 11.1.0.7) the same IR shows only the first 800 rows and then page loading runs endless. When i add a pagination with 500 rows everything works fine.
When i execute the Query in SQL Workshop the 1500 rows are delivered on both systems within 0,4 seconds.
What could be the problem?
kind regards
Stefan
Here the source of the Interactive Report:
select o.oid, o.obj_id, o.obj_name, f.finanzst_oid finanz_kosten_oid, 'Finanzierung' art, fst.BEZ bezeichnung, f.grundstueck_bet grundstueckskosten, f.bau_bet baukosten,f.von_datum, f.bis_datum, f.sort
from afa_objekte o, afa_finanz f, afa_finanzst fst
where o.aktiv is not null
and o.oid = f.objekte_oid
and f.finanzst_oid = fst.oid
union
select o.oid, o.obj_id, o.obj_name, k.kostenst_oid finanz_kosten_oid, 'Kosten' art, kst.BEZ bezeichnung, k.grundstueck_bet grundstueckskosten, k.bau_bet baukosten, k.von_datum, k.bis_datum, null sort
from afa_objekte o, afa_kosten k, afa_kostenst kst
where o.aktiv is not null
and o.oid = k.objekte_oid
and k.kostenst_oid = kst.oid
order by obj_id,sort nulls first,finanz_kosten_oid,von_datum;

any ideas? anyone?

Download Customization in Apex Interactive Report

Hi All,
I am using Apex 3.2.
I have some requirement, for the download the interactive data into xl sheet we can go to action menu and download the report. But in the report there is one edit link ,I dont want down load edit link data. How to avoid this edit link data.
Thanks,
pnr
Edited by: pnr on Mar 28, 2011 5:59 AM

Hello Tony,
Your suggestion on the other thread is interesting and will be helpful on some other reporting I am doing. However, I am still running into an issue. I am unable to get the 2nd interactive report query below 114 columns since I have to keep those fields together so they can look at those fields when they make computations.
I never did say 100 + columns is "Always" needed. However, it is still a needed feature in my opinion. I been using APEX for 2 years. This is the first time I needed this many columns. I am currently working with Institutional Advancement, which by next month will want to have over 200 columns available to them since not only will they be looking at constituents but, they will want to look at corporations as well. Discover isn't an option at this time.
"Maybe someone can build an ad-hoc report builder for APEX applications that can be attached to applications? We have such items in Oracle Forms application I maintain now.."
That would be delightful...
Regards,
Kelly

Interactive Report - default Filter

I'm trying to create a report which would have a default filter (filter users can uncheck) which would be based on logged user :APP_USER
in another words if user JIRI logs in and goes to a page, he can see by default all his records (one of my fields is called RECORD_OWNER), but he can also remove the filter and see all records if he wants to
is this possible to have filter based on :APP_USER ?
thank you
jiri

Jiri,
You could make a check box item on the page which says something like "only show your records". lets say that item is called P150_checkbox and returns Y or N. then in your SQL statement you could put
SELECT <columns>
FROM <table>
WHERE (RECORD_OWNER = :APP_USER AND :P150_checkbox = 'Y')
OR :P150_checkbox = 'N'
{code}
Is that What you are looking for?
Tyson

Interactive Report - Default settings

Where are the default settings for an interactive report stored?
When I run an interactive report, modify settings, save as default settings and export/import just the page to another environment, the default settings don't go for the ride. Of course, exporting/importing the entire application works but I was hoping there was a way to use Page or Component export to transfer the updated default settings.
Thanks

OK I will play around some more and see if I can narrow it down. I just wanted to make sure that IR default settings are stored in the page metadata and not in Shared Components so a page export/import should capture them.
P.S. Thanks for asking. Been busy with some big projects at work. I do lurk on the forum, glad to see that a new generation of helpful professionals have joined us old-timers in supporting the community. Looking forward to Version 4. Cheers.

APEX Interactive Report - sum multiple columns table1 X with table2 value

I have a challenge in oracle apex, were i want to sum multiple columns to give 3 extra rows namely points, Score, %score. There are more columns but chose only few for now.
Below is an example structure of my data:
Town | Sector | Outside| Inside |Available|Price
Roy-----Formal----0----------0----------1------0
Kobus Formal--0 ---------0--------- 1------0
Wika ---Formal----0----------0--------- 1------0
Mevo----Formal----1----------1---------1------0
Hoch----Formal----1----------1---------1-------1
Points--------------2----------2----------5-------1
Score-------------10---------10---------10------10
%score-----------20---------20---------50------10
Each column has a constant weighting (which serves as a factor and it can change depending on the areas) in this case the weighting for this areas are the ones in the first row for the sector Formal:
Sector |Outside| Inside |Available|Price
Formal----1----------1 ----------1-----1
Informal--1----------0 ----------2-----1
I tried using the aggregate sum function in apex but it wont work since i need the factor in the other table. Which is where my challenge started
To compute the rows below the report:
points = sum per column * weighting factor per column
Score = sum of no of shops visited (in this case its 5) * weighting factor per column
% score = points/Score * 100
The report should display as described above. With the new computed rows below.
I kindly ask anyone to assist me with this challenge as i tried searchin on the internet for solutions but havent come across any.
Thanks a lot for your support in advance!!

>
Please update your forum profile with a real handle instead of "823433".
I have a challenge in oracle apex, were i want to sum multiple columns to give 3 extra rows namely points, Score, %score. There are more columns but chose only few for now.
Below is an example structure of my data: Use <tt>\...\</tt> tags as described in the FAQ when posting code and sample data and layouts. Please edit the OP and reformat the example using <tt>\...\</tt> tags so it's clear.
Town | Sector | Outside| Inside |Available|Price
Roy-----Formal----0----------0----------1------0
Kobus --Formal----0 ---------0--------- 1------0
Wika ---Formal----0----------0--------- 1------0
Mevo----Formal----1----------1---------1------0
Hoch----Formal----1----------1---------1-------1
Points--------------2----------2----------5-------1
Score-------------10---------10---------10------10
%score-----------20---------20---------50------10Each column has a constant weighting (which serves as a factor and it can change depending on the areas) in this case the weighting for this areas are the ones in the first row for the sector Formal:
Sector |Outside| Inside |Available|Price
Formal----1----------1 ----------1-----1
Informal--1----------0 ----------2-----1I tried using the aggregate sum function in apex but it wont work since i need the factor in the other table. Which is where my challenge started
To compute the rows below the report:
points = sum per column * weighting factor per column
Score = sum of no of shops visited (in this case its 5) * weighting factor per column
% score = points/Score * 100
The report should display as described above. With the new computed rows below.
I kindly ask anyone to assist me with this challenge as i tried searchin on the internet for solutions but havent come across any.How critical to the solution is using an interactive report? It would be much easier to do this in a standard report where you've complete control over the query SQL and the report structure.
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

ApEx - Interactive Report

I have two issues with respect to Interactive Report in ApEx
1. I used the Aggegrate Function to sum up the values. Though the Values are displayed, i want to have the Wordings " Totals". How to go about that
2. In the Interactive Report, i use the Highlight option to color a set of rows based on some condition. Now after saving the report (primary), i as an end user still see the Query Part with an X. As a developer i dont want my end users to see that portion. From the end user point of view, he should be able to see the report with various colors as defined by me, but without seeing the X mark. (I got the answer to this through another forum,..thanks)
But the first one still remains...
Kindly help.
Edited by: Vraj2k on Nov 25, 2011 4:50 PM

Hello,
Do you want some customers appear twice or not in your top 10?
If not in your select you would need to specify DISTINCT (or probably look a bit more inside the query because you might have a cartesian product that makes the rows appear more than once).
Next you can order by Value and then only show the first 10. You can do that dynamically with the interactive report or directly in your query. On Asktom you see some nice examples about top n queries: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2853107469873
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum

Between operator for group by date in Apex Interactive Reports

Hi,
In the interactive reports filter, i couldn't find the 'between' operator for date field (got a 'group by date' in my sql query (source). I am just wondering, Is it beacuse of the group by date clause?. Is there any way to show the 'between' operator in the interactive reports filter.
Thanks

I just opened an existing IR style report, went to actions, filter, selected a date column and found between at the bottom of the list of values.. Are you sure the date you are trying to filter on is a true date column?
Thank you,
Tony Miller
Webster, TX
What if you really were stalking a paranoid schizophrenic... Would they know?
If this question is answered, please mark the thread as closed and assign points where earned..

APEX Interactive Report Compute Case with multiple conditions to highlight

My ultimate is to highligt a row in an interactive report based on two conditions. I didn't see a way to use the highligt feature with two conditions. So I thought I would try to create a computation based on the two conditions. Then use that result for the highligting. Though I don't seem to be a be able to use multiple conditions in my computation Case statement. Is there a different syntax?
Here is what I have:
Case
When C = 'Open' and I > 15 Then 'True'
Else 'False'
End The error I get is: Invalid computation expression. and
Application Express 4.0.2.00.07
Thanks!
Edited by: cjmartin on Jan 10, 2012 10:57 AM

I'm surprised no one responded to this. What I did to resolve this issue was create a nested case statement. I don't think this was a good solution, but I can't find anyone else giving input. I know I can create another computational column in the select statement for the report, but the 'Interactive Report' part is where this should be. I want my clients to calculate what they want. Kind of hard when you can not use an 'and' for a range criteria.

APEX Interactive Reports - Default number of records

Similar Messages

Maybe you are looking for