APEX is running. I'm at the login page. Now I can't remember my admin username and password

After hours upon hours of finding fixes to get Oracle Application Express running, I am now on the verge of finally getting the test environment setup. In the frustration, I have now forgotten my username and password that I had when I created the thing.
Help?
BTW, is my default workspace called "Internal?"

login with sys account over installation folder..
e.g C:\apex>sqlplus
connect:sys/xe@xe as sysdba
SQL:>@apxchpwd
You can reset ADMIN password(e.g Apex_4.2)

Similar Messages

I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

Try this:
http://support.apple.com/kb/HT2519

So, I made my account a while ago before I had an iPhone so I can get music. The result of that I can't remember my security questions, and it tells me to send a rescue email an alert, but it doesn't show you how to get to that page. Can someone help me?

So, I made my account a while ago before I had an iPhone so I can get music. The result of that I can't remember my security questions, and it tells me to send a rescue email an alert, but it doesn't show you how to get to that page. I am getting quite annoyed because apples hours arent the best fitted to my scedule since I have school and work, so I cant call and ask how to get fixed. Please help me all I want to do is buy some music...

Click here and fill out the form.
(90729)

HT201441 hi freinds i bought a 4g iphone second-hand i earsed the phone but now when i open it requsting an email and password of the privous owner to be active what can i do in this case i don't now the the iphone's owner please help

hi freinds i bought a 4g iphone second-hand i earsed the phone but now when i open it requsting an email and password of the privous owner to be active what can i do in this case i don't now the the iphone's owner please help

Then there's nothing you can do. Only the previous owner can help you. They must either provide the ID and password, or erase the phone and remove it from their account as explained in the article you were reading. There's no way around this.

HT4061 just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password and cannot activate without it. How can I get past this?

Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?

Forgot iCloud username: http://iforgot.apple.com/appleid
Forgot iCloud password: http://iforgot.apple.com

Firefox 7.0.1 does not remember/fill in username and password in Mac version although on Windows it works, so it's not the website preventing password being saved. what is up and how can this be fixed ?

There are several sites where I now have to type in my username and password each time I return, such as turnitin.com. (I'm a teacher and use this for grading). Friefox used to be able to remember this for that site and it still works at my office where I have a windows machine. Not working on my Mac OS 10.6.8 and it is really annoying to have to retype every single time; it's not a financial site or anything so why can't the Firefox browser remember and re enter my info?
And no, turnitin does not currently support Firefox 7 but it is only up to firefox 4 and up until now firefox at least worked to remember passwords.
I looked at http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered and I have checked all the recommended browser settings and am not set to private browsing; the sites where this happens are not set in exceptions to remembering, and they are not set to be cleared automatically
So, what's up and why doesn't Firefox remember passwords and usernames any longer?

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

Need help resetting or changing my admin username and password without the installation disc

I accidentally clicked on the check box that is located in system preferences in accounts that says "Allow user to administer this computer" and unchecked it. So the account that I set up the user name and password to is not the administer anymore and I don't know what account is. So now every time I want to make changes to anything and click on the lock button it will not accept my username and password. So how do I reset my username and password for the administer without the installation disc and without losing any files or folders????
Message was edited by: ashkonnor8808

Those changes require an installation DVD. However, see:
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself

How can I change the admin username and password

how can I change the default admin adminadmin username and password for the server

What version of Creator are you use?
In Creator 2 Update 1, using Application Server version 8.2, you can do the following..
1) Log into the Admin Console using the default UID/PWD
2) Expand the tree view by following this path:
Application Server > Configuration > Security > Realms > admin-realm
3) Click on "Manage Users"
4) Click on the UserID "admin"
5) enter the new password that you would like
6) Click on the "Save" button on the upper right side of the page.
That should do it for you.
Good luck

My admin status has been changed to standard after the yosemite software update,now i have no admin and can't tso anything as before doing anything it asks for admin username and password,which i don't know as there is no admin!

admin status changed to standard,currently no admin,what to do!?

Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no administrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always possible.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
          Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
          Select the user account
and select
          System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
           ▹ Restart...
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
           ▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
          Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup.

I have a new PC (my old one crashed). I can't remember my old username/pword. I tried to set up a new acct. and my I Pod is erased! How can I get the songs back?

My old PC crashed, I bought a new one. When in I tunes on my new PC, I could not remember my old username and password. I created new ones. Then I was instructed to connect my I Pod to my PC via USB, Then I was asked if it was OK for I Tunes to erase all my data on my I Pod, Yes or Cancell. I pressed Cancell. All my 2,700 songs were promptly erased!
How can I retrieve them? I can't remember my original username and password.
PLease Help!
NB

Unfortunately, if the iPod data has been erased by iTunes, there is no way you can retrieved them.
Do send your issue to iTunes. feedback.

Where do I apply this CSS file in the login page to get the required output

Hi,
I am an apex beginner. I got this html text from a 'Google Blank Search' for beautifying the login page. I have no idea where to copy and paste this CSS file in the 'login' edit page. If I open 'Edit Page template option, I can see page 'Definition' , 'Header' and 'Footer' and so many codes. In which part of these areas I Should copy this script to get the output.
Thanks in advance...
Please find the script below.
html, body {
     font:normal 12px verdana;
     padding:0;
     border:0 none;
     overflow:hidden;
     height:100%;
     body {
     padding: 0px;
     background-image:url(&LOGIN_BACKGROUND_IMAGE.);
     background-repeat:repeat;
     background-position:center;
     background-attachment: fixed;
     text-align:center;
     margin:0 auto;
     vertical-align:middle;
     #Messages {
     width:345px;
     margin-left:-180px;
     position:absolute;
     top:50%;
     left:50%;
     margin-top:-35px;
     #BoxBody {
     width:345px;
     margin-left:-170px;
     position:absolute;
     top:50%;
     left:50%;
     margin-top:30px;
Edited by: user13561710 on Jan 9, 2011 5:32 PM
Edited by: user13561710 on Jan 9, 2011 5:33 PM
Edited by: user13561710 on Jan 9, 2011 5:37 PM

Hi,
Edit the page and add the styles into the HTML Header setting. Also ensure that the styles are enclosed within STYLE tags:
<style type="text/css">
html, body {
margin-top:30px;
</style>Andy

Changing DB username and Password for APEX

Hello Guys:
My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
Thank You For Your Help
Adel

Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
Thank You
Adel

Username and Password for access apex 4.2

Hello,
I have installed apex 4.2.
Then i have execute java -jar apex.war to instlla listener
Then i have execute
http://localhost:7779/apex
at this point the server ask
Autentication Required
The server http://localhost:7779/apex requires a username and password
The server says XDB
??? Witch are le Username and Password ??
Thank You

I understand now. You are in the Embedded Web Server and can not access the Admin settings. In order to reset the password back to defaults, we will need to restore the Network defaults on the printer, then reconfigure the printer for your wireless network again. You can use the steps below to restore the network defaults on the printer;
Touch the little wrench (settings) icon you see in the top right hand corner of the printer touch screen.
Touch the Wireless Menu.
Navigate to Restore Network Defaults.
Once restored, go to the Wireless Setup Wizard in the Wireless Menu and reconfigure the settings.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

You do not have access to the printer. use a different username and password - is there a fix?

Purchased this last night. Difficulty installing and now able to install. Get to the part where you need to put in your username and password. Then I get the you don't have access to printer error. my username and password is correct as I can sign in just fine.
Windows 7 Pro
AD014301562
Advise with a fix as I need to get work done. Not sure why this has been do difficult. If this cannot be resolved I need a refund.
Thanks
Tom

Hi tseymour65,
Please refer to this FAQ link:Adobe CreatePDF Desktop Printer is no longer available
Regards,
Florence

What is the Username and Password of the localhost:8080 to login to Apex?

I just installed the Oracle Application Express to or above SQL of Oracle DB 11g Enterprise Edition. It said it was successfull installation. But when I login to Apex admin, using Firefox browser, (localhost:8080/apex/apex_admin), the firefox browser ask for my Username and Password. I used SYS and my password when I installed Oracle DB 11g, it didn't work.
Please help me solve this problem so that I continue learning Apex. Now I'm stuck.

Hi,
Does it ask XDB password?
If yes, did you unlock ANONYMOUS account?
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CHDEIGGI
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

APEX is running. I'm at the login page. Now I can't remember my admin username and password

Similar Messages

Maybe you are looking for