APEX listener 1.0.2 link downloading wrong version

on the site: http://www.oracle.com/technetwork/developer-tools/apex-listener/downloads/index.html, at the bottom when attempting to download Oracle APEX Listener 1.0.2, the link actually points to apex_listener.1.1.2.131.15.23.zip (the current version)

Similar Messages

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Downloaded wrong version

Downloaded wrong version of Elements 12 by mistake. Need Mac version, not Windows. How do I change it for the Mac version?

just download the mac version: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

Download wrong version, need mac and no windows

Hi there,
we download the wrong version, we need the mac but we have the window.
What we could do?

What product?
Mylenium

Bridge CC links to wrong version of Photoshop

When double clicking an image Bridge CC attempts to open Photoshop CS4 (which isn't even installed anymore) rather than opening Photoshop CC. I can't find anywhere in the preferences dialog, or anywhere else, how to tell Bridge where to look. Any ideas?

I can't find anywhere in the preferences dialog,
Bridge preferences / Filetype associations. Inhere find the filetype you want to open in PS CC and from the corresponding menu change it back to CC

Download wrong version of app need hd bad pig

How to exchange app

There is no exchange for accidental purchases.
If you havent abused anything in the past, you may get lucky with a O-T-E.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Apex Listener Configuration Issue.

Hi there,
As I wanted to try the latest Restful services in apex 4.2, I decided to install Apex Listener 2.0. I downloaded the file and followed the steps as in the installation notes. As a pre-requisite, I configured the Restful services successfully in apex 4.2 along with Oracle 11g Express Edition. However, the installation of listener seems to be not compleated successfully with the following installation feed back.
D:\software\apex_listener>java -jar apex.war
This Listener instance has not yet been configured.
Please complete the following prompts
Enter the location to store configuration data:d:\apexlistnerconf
Dec 27, 2012 3:34:47 PM oracle.dbtools.common.config.cmds.ConfigDir execute
INFO: Set config.dir to d:\apexlistnerconf in: D:\software\apex_listener\apex.war
Dec 27, 2012 3:34:49 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: D:\apexlistnerconf\apex
Enter the name of the database server [localhost]:
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:2
Enter the database SID [xe]:
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Password must not be empty
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:3
Dec 27, 2012 3:37:03 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:
Enter the APEX static resources location or Enter to skip:D:\software\apex42en\apex\images
Enter the HTTP port [8080]:
Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute
INFO: NOTE:
Standalone mode is designed for use in development and test environments. It isnot supported for use in production environments.
Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute
INFO: Starting standalone Web Container in: d:\apexlistnerconf\apex
Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy
INFO: Will deploy application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml
Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy
INFO: Deployed application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml
Dec 27, 2012 3:41:18 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: D:\apexlistnerconf\apex
Default Database connection not configured properly
Dec 27, 2012 3:41:20 PM oracle.dbtools.rt.web.SCListener contextInitialized
INFO: Oracle Application Express Listener initialized
Application Express Listener version : 2.0.0.354.17.06
Application Express Listener server info: Grizzly/1.9.49
Dec 27, 2012 3:41:20 PM com.sun.grizzly.Controller logVersion
INFO: GRIZZLY0001: Starting Grizzly Framework 1.9.49 - 12/27/12 3:41 PM
Dec 27, 2012 3:41:20 PM com.sun.grizzly.SelectorHandlerRunner handleSelectException
SEVERE: doSelect IOException
java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
        at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
        at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
        at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
        at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
Dec 27, 2012 3:41:20 PM com.sun.grizzly.http.SelectorThread$3 onException
SEVERE: Exception during starting the controller
java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
        at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
        at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
        at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
        at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
        at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
        at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
        at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
        at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
Dec 27, 2012 3:41:20 PM oracle.dbtools.standalone.Standalone execute
INFO: http://localhost:8080/apex started.It simply hangs at the last line and I couldn't make any further progress.
Can you please help to find out what went wrong?
Thanks in advance.
Regards,
Natarajan

Thank you Probodh for your quick help. I set the port 8080 to apex listener and it does not give that error now.
However, it still says "Default Database Connection not configured properly"
I gave the SID name as xe which is the default one, and that is the correct SID for my DB also.
Any possible mistakes in there?
D:\software\apex_listener>java -jar apex.war
Dec 27, 2012 7:29:45 PM oracle.dbtools.standalone.Standalone execute
INFO: NOTE:
Standalone mode is designed for use in development and test environments. It is
not supported for use in production environments.
Dec 27, 2012 7:29:45 PM oracle.dbtools.standalone.Standalone execute
INFO: Starting standalone Web Container in: d:\apexlistnerconf\apex
Dec 27, 2012 7:29:45 PM oracle.dbtools.standalone.Deployer deploy
INFO: Will deploy application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xm
l
Dec 27, 2012 7:29:46 PM oracle.dbtools.standalone.Deployer deploy
INFO: Deployed application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml
Dec 27, 2012 7:29:46 PM oracle.dbtools.common.config.file.ConfigurationFolder lo
gConfigFolder
INFO: Using configuration folder: D:\apexlistnerconf\apex
Default Database connection not configured properly
Dec 27, 2012 7:29:48 PM oracle.dbtools.rt.web.SCListener contextInitialized
INFO: Oracle Application Express Listener initialized
Application Express Listener version : 2.0.0.354.17.06
Application Express Listener server info: Grizzly/1.9.49
Dec 27, 2012 7:29:48 PM com.sun.grizzly.Controller logVersion
INFO: GRIZZLY0001: Starting Grizzly Framework 1.9.49 - 12/27/12 7:29 PM
Dec 27, 2012 7:29:48 PM oracle.dbtools.standalone.Standalone execute
INFO: http://localhost:8080/apex started.Regards,
Natarajan

OIM 11g install error INST-07286 mw_home has wrong version weblogic

Hi gurus,
I have been trying to install OIM 11g from past few days
1. I have installed Oracle 10.2.0.5
2.I installed weblogic 10.3.3 by downloading from Oracle website , wls1033_dev.zip
3.I ran Rcu utlity 11.1.1.3.3
4. I installed SOA 11.1.1.2.0.
I am trying to upgrade soa to 11.1.1.3.0 using ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
It gives me error
INST-07286 Specified Oracle Middle ware home does not contain weblogic version 10.3.3 , upgrade to crrect version and then retry
It does not let me further.
Can some one please help /advise ?
Thanks,
Pandu

Hi Gurus,
I think I found the answer.
I downloaded wrong version of weblogic
I had linux 32 , and wanted weblogic 10.3.3, So I went here ( row 3 , column 2)
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
file name = wls1033_dev.zip
well I was wrong it was not 10.3.3 or something was wrong. SOA installer did not recognise it as 10.3.3.
Who is to blame. I wasted 3 days I hope Oracle keeps right versions in its website for download.
I got the right one from edelievry
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493750
and download =
Download Oracle WebLogic Server 11gR1 (10.3.3) for Linux x86 V21014-01 703M
Hope this helps some one.
Thanks!

APEX listener - empty page ??

Hi,
I have installed tomcat / APEX listener on Oracle Enterprise Linux 5 (with 11gR2 database)
The configuration seems to be done ... but the page: http://oel52server:8080/apex/apex give me an empty page ?
do you know what's wrong ?
Cyryl

Thanks for the answers.
I have a similar problem-- but I believe it may not be because of JDK ver. (becaue I already use ver. 6.0).
Although I am able to see the Apex login page. http://localhost:8888/apex/, but no images are displayed. Moreover it asks for Workspace, Username, Password which I am unaware of (it did not ask for any such information while installing apex). It looks like none of the buttons/links are active. Did I do anything wrong while installing apex?
This is how I installed Apex.
1. Downloaded and installed tomcat application server and Apex Listener as per the instructions given in the link:
http://www.oracle.com/technology/products/database/application_express/html/apex_listener_install_web.html
(section B. Installing with Apache Tomcat in the installation )
2. The images are copied to the following location (as given in the instruction):
C:\apache-tomcat-6.0.24\webapps\ROOT\images
3. Started both oracle db server and tomcat app. server
4. Opened the page http://localhost:8888/apex/Config
at this point I get the login page with no images and inactive links/buttons.
Appreciate any help.
Thank you,
Pravy

Error when print report from apex using apex listener 2

Hi
Apex 4.2
I want print report to pdf from apex using apex listener 2.
The print server 'Oracle APEX listener' has been defined at the instance-level.
ACL has been configured.
I attempt to download a report in PDF mode, it appears that it downloads,
but when I go to open it up I get an error that the file is of the wrong type or possibly corrupt.
Upon opening the file in Text editor, there is an error as below
%PDF-1.4
1 瀛楄妭鐨?UTF-8 搴忓垪鐨勫瓧鑺?1 鏃犳晥銆?

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

APEX LIstener administration via SQLDeveloper 3.2.2 error

Hi,
I configured the APEX Listener 2 on my server and everything works fine.
I also configured the Restful webservices that also works fine in APEX.
Now , I would like to be able to configure the APEX Listener via SQLDeveloper 3.2.2
I changed the defaults.xml file to allow a non HTTPS connection and configured the adminlistener password.
When I try to connect to the APEX Listener via SQLDeveloper to retrieve the configuration, I get the following error :
Error occured retrieving Administration Settings from Listener.
Unexpected Content-Type:application/json; charset=UTF-8
APEX Listener is installed on Windows (french version).
Thanks
Francis.

Hi Francis, I'm getting the same error.
(I do note however that SQLDev does make the connection - and even though I get the UTF8 error, I can upload/download config files. This would appear to be a warning/info message. But still annoying.)
I am using CentOS 5.8 Linux, Glassfish 3.1.2, SQLDev 3.2.20.09, ApEx 4.2. DB is 11.2.0.3, AL32UTF8. So this problem is not unique to Windows or French.
Wayne
Edited by: cawli2 on Nov 6, 2012 10:54 AM
Edited by: cawli2 on Nov 6, 2012 12:36 PM

Apex Listener return blank pages with no configuration errors!

- I set up an Apex Listener "Version:1.1.3.243.11.40" at "10.0.114.11" in standalone mode.
- I configured Apex Listener via http://10.0.114.11:8585/apex/listenerConfigure and return with no errors.
- I get http://10.0.114.11:8585/apex/listenerStatus, it returned this:
Current Time:     Tue Dec 13 17:06:32 ICT 2011
Server Uptime:     0 Days 01:10:14.101
Total Accesses:     38.0
Total Traffic:     161.34K
Total Errors:     0
Total File Downloads:     0
Total Processing Time:     0 Days 00:00:09.354
Processing Time in milliseconds:     Minimum: 20 Average: 246 Median: 64 Maximum: 3062
Database Time in milliseconds:     Minimum: 14 Average: 61 Median: 50 Maximum: 204
Active Requests:     0
Connections in the pool apex:
Active: 0 Available: 1
But when I go to "http://10.0.114.11:8585/apex" or "http://10.0.114.11:8585/apex/apex_admin", I got blank pages.
The page displays "Application Express Login" or "Application Express Administration Services" in the tab at the top of IE, but nothing else. Anyone have any ideas what could be happening here ?
thanks so much,

Hi Udo!
I run apex_listener with this below command and the output is that:
java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war
INFO: Starting: /source_install/apex_listener.1.1.3.243.11.40/apex.war
See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: /tmp/apex
INFO: Using classpath: file:/tmp/apex/apex/____embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar:file:/tmp/apex/apex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:
INFO: Starting Embedded Web Container in: /tmp/apex
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: Will deploy application path=/tmp/apex/apex/WEB-INF/web.xml
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: deployed application path=/tmp/apex/apex/WEB-INF/web.xml
Using config file: /tmp/apex/apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.3.243.11.40
APEX Listener server info: Grizzly/1.9.18-o
Dec 13, 2011 6:40:23 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Tue Dec 13 18:40:23 ICT 2011
INFO: http://localhost:8585/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
I don't know how to "could you please check if you configured the directory for the static contents ("images") correctly"
because the Installation Guide of Oracle about Install Apex in standalone mode do not tell me to configure images any more. I just run apex listener with above command "java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war".
Thank you for your reply,Udo!

Apex listener, POST, internal body-variable

Hello,
I am using Apex-Listener 1.1.2.131.15.23 on SUSE Linux 11.3./Oracle XE 10. I created a Resource Template with POST-methode and the following pl/sql-block:
declare
l_nuLen1 number;
l_nuLen2 number;
begin
l_nuLen1 := length(:body);
l_nuLen2 := dbms_lob.getLength(:body);
:status := triple.coxSmsAt.fSetResponse(:contentType || '(' || to_char(length(:contentType)) || ')',to_char(l_nuLen1) || '/' || to_char(l_nuLen2),:body);
end;
In my STF on the database there is no problem to get the value of :contentType. But if I want to access to the :body-variable most of the tries ended in a server-error. With the PL/SQL-block above there is no server-error but the result is l_nuLen1 = 5, l_nuLen2 = 0 and no value apears in the fSetResponse-StoredFunction for :body.
Can someone help me?
Thanks
Martin

Well the idea behind APEX (Application Express ) is that you can develop mostly declarativly. This is what a RAD tool/framework should do. You seem to think that your requirements somehow force you to send your own constructed code to the listener. Why? Apex in general is very good at hiding this logic from you. Maybe instead of asking a deeply technical question, start by explaining what you want to achieve (business language not technical explaination!). Then lets talk how to use Apex in a normal way to achieve the same result. This might even help you to develop better stuff in faster time.
Edited by: Sven W. on Sep 10, 2012 4:20 PM - typo corrections
Your requirement would violate several standard design principles. One should not do so without good reasoning.
Consider this link: http://effectivesoftwaredesign.com/2012/02/05/separation-of-concerns/
Edited by: Sven W. on Sep 10, 2012 4:24 PM

Apex Listener in standalone mode, how to set/reset db connection.

Sometime ago I installed Apex Listener for testing, then I removed it.
Now I downloaded last version, installed it in standalone mode and try to set the DB connection.
However when I try to edit in listenerAdmin page the db connection parameters I can't : they are greyed and report the connection informations I gave in my first test installation.
How can I change them ?
How can I avoid all fields in listenerAdmin greyed ?
Tks
Tullio

Hello Tullio,
you can run /listenerConfigure/ only as long as there is no configuration available. The database parameters can only be setup when the APEX Listener is not connected due to the state of its connection pool. Once it is established, you can only configure it offline by editing the apex-config.xml . That's why the parameters are greyed out in /listenerAdmin/.
You probably only removed the war file of your test installation, but not the apex.home including the apex-config.xml that is stored in there. So your new installation found the old home and reused the connection.
You could either edit the apex-config.xml or delete the apex.home and rerun /listenerConfigure/
If you run on a windows system, you'll find the apex.home in your users TEMP, usually located in the temp folder underneath the local settings of your user profile. The directory to locate is now called "apex".
-Udo

Apex listener images deployement

Hi
I installed the APEX listener recently. I have a question. Can I deploy the images in a different way other than jar them and then deploy to WLS. I have a lot of custom images/javascripts reside under the /i/ virtual path (e.g. /i/extjs). The images and javascripts change frequently. I guess that every time this happens I have to create a new i.war and redeploy which is not so convenient. Is there any other way to do that (e.g. copy them directly to a directory as I was doing with OHS/modplsql)
Thanx
George

Hi George,
you could do this by locating the directory where the WLS has unpacked the deployment to. But the more I think about this, the more I think you shouldn't do that, because staging etc. makes this very complex again.
Instead of deploying the images as war file, you could add a virutal directory mapping, which is far easier.
It should be possible to do that in the weblogic.xml of the apex.war (unpack the war, edit the file, repack the war, similar to what you'll do if you edit the web.xml, e.g. to change to config.dir parameter). See the [url http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webapp/weblogic_xml.html#1039396]corresponding part of the WLS documentation for details on that parmaeter. The result could be a weblogic.xml as follows
<weblogic-web-app xmlns="http://www.bea.com/ns/weblogic/weblogic-web-app">
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
<virtual-directory-mapping>
<local-path>/opt/oracle/apex/images</local-path>
<url-pattern>/i/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>if your images are stored in */opt/oracle/apex/images* .
Not that this can cause node specific dependencies if you have a clustered WLS, and that you'll have to undeploy the i-application before you can redeploy the apex.war.
-Udo

APEX listener 1.0.2 link downloading wrong version

Similar Messages

Maybe you are looking for