APEX Listener 2.0.1 does not restart on power-up of system

APEX Listener 2.0.1
APEX 4.2.2
Oracle EE 11gR2
Linux RHEL 6.3
GlassFish 3.1.0
After rebooting my Linux server with the above configuration, the APEX Listener is down and needs to be restarted via GlassFish. What may be causing this? How can I get the APEX Listener via GlassFish to restart on system power-up?
NOTE: I did not have this issue when using APEX Listener 1.4 with the same GlassFish server.
Thank you.

Found the issue. chkconfig was starting GlassFish before the database was up and running. Changed chkconfig parameters in startup scripts. Works fine.

Similar Messages

APEX Listener 2.0.1 does not restart on power-up

APEX Listener 2.0.1
APEX 4.2.2
Oracle EE 11gR2
Linux RHEL 6.3
GlassFish 3.1.0
After rebooting Linux server with the above configuration, the APEX Listener needs to be restart via Glassfish. What may be causing this? How can I get Glassfish/APEX Listener to restart on system power-up?
I did not have this issue with APEX Listener 1.4
Thank you.

Please use the APEX Listener forum for APEX Listener related questions.

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device?

I have a MacPro with 10.7.2 installed. I want to create a new partition and install 10.5. When I put in the install DVD and restart the computer, it does not restart. What can I do?

I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drives

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

My Mac OS X does not restart while trying to update/install

My Mac OS X does not restart while trying to update/install iTunes. It allows me to click on Restart button, then just the screen saver shows up, waited 10 -15mins and nothing happens. Had to force shut to try again, same thing happens.

As a test, try opening the PDFs using Preview and see if they will print correctly from that application. If so, then it is likely an Acrobat problem. If they still don't print correctly, it is like a file problem.
You can also try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

IS there any app to listen FM radio which does not need internet.

IS there any app to listen FM radio which does not need internet. Because my previous nokia phone had it and I can listen to local FM stations without connecting to internet.

To think outside the box, you could get a headset with FM:
Sony Ericsson MW600 Bluetooth Stereo Headset with FM Radio
Sony Ericsson MH907ch Bluetooth Stereo Headset with FM Radio
I use the first one with my Sony Ericsson phone, which although it does have a FM radio, doesn't work unless I have wired headphones plugged in. And the streaming apps are choppy for me due to the weak 3G signal in my area. (Constant rebuffering.) So with these headsets, I have FM radio and can answer the phone without having to change earbuds and without having having to use up my cellphone's battery power to power the FM radio or the app.

10.9.1 installs, then system turns off and does not restart.

10.9.1 installs, then system turns off and does not restart. When I eventually turn it back on, it installs again, then turns off.. Endless Cycle.. I have booted to restore disk, found errors that needed to be repaired and tried to repair them but system told me, after a few minutes, its not possible to repair. When I restart back to main disk, it shows the install AGAIN and then turns off. Much appreciate any Ideas?

All I can tell you is that:
Antivirus software, aside from being next to useless on Macs, is a common source of problems with Mavericks.
Google Drive was incompatible with Mavericks last time I looked.
WD hard drives have software that comes on the drives that is incompatible with Mavericks, software that comes with the drives that they want you to install on your mac which is incompatible with Mavericks, and in some cases firmware in the hardware of the drive enclosure itself which is incompatible with Mavericks. And all of this software is completely unnecessary. The good folks at WD have really worked hard to ensure that their products won't work with Mavericks. Bless their little pointy corporate heads. I'll bet that's the last WD drive you'll buy.
Basically you would need to get all this stuff uninstalled from your hard drive before it will reliably work with Mavericks. But even then, it might not work, because old/bad/incompatible software can alter your OS and the kernel such that uninstalling it won't help- the OS/kernel may be damaged such that you have no alternatives other than to erase the HD and start over. And anyway, currently you can't boot your HD to be able to access the Finder so unless you're going to spend a weekend with the Terminal you won't be able to uninstall that stuff in the first place. If I were you I'd just go ahead and erase the HD and install Mavericks from scratch.
10.9.1 doesn't come on a CD. If you had another (working) mac you could make a bootable installer flash drive with DiskMaker X and an 8 GB key drive DiskMaker X (formerly Lion DiskMaker) , but then you'd still have the same problem, the incompatible software would still be on your HD, unless you erase it first before you try installing Mavericks again. So there's really nothing to gain by having the Mavericks installer on a disk.
If you have a third party utility like Techtool Pro 7 you might be able to boot from the TechTool disk and repair your HD enough for it to boot.
Message was edited by: arthur

Mac pro does not restart

Mac Pro on OS X 10.7 does not restart. Grey screen, no apple, nothing happens.

cmd-r brought it to life, than restarted and it was ok.
Tnx for helping out.
If you could tell me why this network screen doesn't give wifi or airport options, i'd really be grateful.
Newly installed Lion, router is fine.

Xperia Z1 keeps shutting down does not restarts,and automatically stops and starts charging randomly

My Sony Xperia Z1 keeps shutting down due to high temperature even though its not overheated, or i am not running any app. It does not restarts even after i give it some time to cool down as it soon again displays the same messege (SHUTTING DOWN DUE TO HIGH TEMPERATURE), then when i connect a charger it automatically starts charging and discharging (even though if the charger is connected and ON) the cell phone
I request you to kindly look into the matter, expedite the situation and suggest me any possible solution asap
also i would request you to not to release any OS updates unless they are fully stable and functional, i have bought this device 6 months back and it has already malfunctioned 3 times which is a serious concern. I cannot keep on updating and repairing my cell phone after every month or so which i feel is very irritating.
Please stop treating these devices as developers guinea pigs

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to create a looping music player that does not restart when you go to other pages

Hello
I am new to web design. I apologize if I do not use the write
terminology. I am designing a website. I want to have a song that
loops continuously throughout the site and does not restart when
you click on the different pages. I have included a link to a site
that I found that does what I want to do. (Hopefully this link will
give you a better idea of what I am trying to describe)
http://www.marcuscoleministries.com/index2.html
Thanks for your time and consideration

You will have to use frames which in itself is a bad idea.
IMO music that
plays automatically is a terrible idea. It is likely to drive
away many
visitors and is unlikely to retain even a single visitor.
Avoid frames. Drop the music. You'll be happy you did.
Walt
"dbone1" <[email protected]> wrote in
message
news:fn36v6$de7$[email protected]..
> Hello
>
> I am new to web design. I apologize if I do not use the
write terminology.
> I
> am designing a website. I want to have a song that loops
continuously
> throughout the site and does not restart when you click
on the different
> pages.
> I have included a link to a site that I found that does
what I want to do.
> (Hopefully this link will give you a better idea of what
I am trying to
> describe)
http://www.marcuscoleministries.com/index2.html
>
> Thanks for your time and consideration
>
>

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

APC UPS (uninterruptible power supply) not restarting after power restored

I just bought an APC UPS 1500VA Smart-UPS (model SUA1500) to protect:
-- iMac 20" 2.16 GHz Intel Core 2 Duo with 2GB memory and 500GB internal disk
-- (2) external Seagate FreeAgent Pro 750GB USB drives
-- (1) external MacGurus Burly Firewire enclosure with (4) 1TB Seagate Barracuda 7200.11 drives
-- DSL modem
-- Ethernet hub
-- Airport Express (b/g-model, not the new n model)
The UPS is connected to my Mac via USB cable. The UPS shows up in System Profiler as "Smart-UPS 1500 FW:601.3.D USB FW:8.1". It also appears in System Preference Energy Saver pane.
I have configured the Energy Saver preferences pane to shut down the computer when 75% of the UPS battery remains. And to restart after power failure (both on power adapter and on UPS).
So I cut the power to the UPS and the computer properly shuts down when the battery reaches 75%. A couple of minutes later, the UPS turns itself off. All good so far.
PROBLEM 1: When utility power is restored, the UPS does not restart. APC's documentation says it should. Is the Mac sending some sort of shut-down command to the UPS over the USB cable that is preventing the USB from restarting?
PROBLEM 2: After I manually start the UPS (by turning it on after utility power is restored), the Mac ignores its setting to "automatically restart after power failure." I want the machine to restart itself because it is my backup server, music server, and provides file sharing access for other computers on my home-office network.
Anyone else having trouble getting their UPS or Mac to restart after a power failure? Any thoughts? Any configuration settings I'm not getting right?
Many thanks.

The "Restart automatically after a power failure" option only restarts if the computer was running when power failed. Since you had it shutdown before the power failed, it's not going to restart. Maybe Mac servers, or the server version of OSX, have more options.
Instead of shutting down when the UPS battery is almost dead, you could just stop all the applications that write to disk, so there won't be any disk operations in progress, then wait for the power to fail. It will then restart when the power come back. You should have something running to monitor the UPS, in case power returns, and the UPS doesn't shut off its output. In that case you should have it restart your applications.

HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J

APEX Listener 2.0.1 does not restart on power-up of system

Similar Messages

Maybe you are looking for