APEX reports User elapsed / think time per page

Could smb explaing me what is the difference between "elapsed time" and "think time" in reports at Home>Application Builder>Application XX>Application Reports>Activity>Page Views By View
is it time user spent on page vs. time it took to render the page?
Thank you, Michal.

Hi
Elapsed time is the time it took to render and think time is the time it took for the user to go from one action to another (loading the page before clicking a button for example)
Cheers
Ben

Similar Messages

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

How to make report high 3.33 inch per page(11g report)

Dear all,
How to make report high 3.33 inch per page
so if there are more than one page in the report it will start printing in the correct position on the next page,
i make generate to PDF then print
Thanks,
Sakr

Hello Sakr,
This is a good question:
You can visualize:
http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp
You can change Height that shows 11 in the visual aid.
Mark Correct or Helpful !
Edited by: New Yorker on Aug 26, 2011 11:40 AM

IN XML PUBLISHER REPORT WHICH SHOWS 5 RECORDS PER PAGE REG:-

{color:#0000ff}Dear All,
Conditionally, i want my XML Report has to be Display only 5 Records per Page..
If there are hundreds of records in XML file.
Please, could u help me out..
Waiting for ur reply..
Regards,
Sarfraz.
{color}

For 11i, pl see the XML Publisher User Guide at http://download.oracle.com/docs/cd/B25516_18/current/html/docset.html on how to achieve this
HTH
Srini

OBIEE 11g: Report not displaying maximum rows per page

I have an OBIEE report that is not displaying the maximum rows per page. When I click on the UP/DOWN arrow at the bottom of the report there is no change.

Hi,
Refer the below link.
http://satyaobieesolutions.blogspot.in/2012/08/limit-row-in-table-and-graph-in-initial.html
OR,
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1198961.1
Add the following to your instanceconfig and then restart the presentation service.
file path
D:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml just add below lines
<Views>
<Pivot>
<MaxCells>6500000</MaxCells>
<MaxVisibleColumns>100</MaxVisibleColumns>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>
<MaxCells>6500000</MaxCells>
<MaxVisiblePages>100</MaxVisiblePages>
<MaxVisibleRows>65000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>500</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>65000</DefaultRowsDisplayedInDownload>
</Table>
</Views>
Hope this help's
Thanks,
Satya

How to create a report and summarize some columns per page

Hi all,
I need to create a HTML report using the OA Framework Extension and it needs summarize some values columns highlighted similar to what can be done when using Report6i. Is there some class or package or a region or page's parameter that permits me to do that?
I also thought to summarize the values and put them in a table with a column saying that the line is a simple value or a summary and just put those values in html table. My problem still how to hightlight the html table line when the value "summary" is being fetched.
Any suggestion????
Thanks in Advance!!!

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

When downloading i can only download one link at a time per window. i used to be able to download six links at a time per page. how do i go back to this?

got a new laptop. unsure of firefox verson on old as the computer quit taking a charge.
but essentially on my old laptop if a window had six downloadable links i would be able to download all six at once. now i can only download one link at a time. this is very annoying. i do not believe it is an issue with the new laptop itself as it is a highend toshiba.

Hello cherokeeguy, go to [http://kb.mozillazine.org/About:config about:config] find [http://kb.mozillazine.org/Network.http.max-persistent-connections-per-server network.http.max-persistent-connections-per-server] right-click on it, select modify and put a greater value, try 10 or 16, click ok to save it, exit firefox and restart it.
BUT this normally should not happen !
check it also in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode], select '''''"Start in Safe Mode" '''''and see if this happen again, if not see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
also try to update to the latest firefox 16.0.1
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Restricting chart records according to Report no. of Records per page

Hi
I am calling a column chart from Report using custom Query and I am mapping the Chart Column property in Report respectively to the chart.
The Repeating frame with respect to the Reports Records 'Max. records property' is set to 2. Hence the chart and the Report records are on the 3 pages as the Total records are 6.
But the chart is plotting all the 6 records even though the Report populates only 2 records per page. I require it to plot only respective records of the Report for that page in the chart not all the 6 records.
Pl. let me know how to Proceed
Thanks
Prakash H L

Pagination settings have always been cached for the duration of the session. After changing the rows per page value in the report attributes, either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.

Restricting to Display 2 records per page simulteneously in Graph & Report

Hi
I am calling a column chart from Report using custom Query and I am mapping the Chart Column property in Report respectively to the chart.
The Repeating frame with respect to the Reports Records 'Max. records property' is set to 2. Hence the chart and the Report records are on the 3 pages as the Total records are 6.
But the chart is plotting all the 6 records even though the Report populates only 2 records per page. I require it to plot only respective records of the Report for that page in the chart not all the 6 records.
Pl. let me know how to Proceed
Thanks
Prakash H L

akshatha wrote:
i am doing small project in jsp there i have search engine
if you type anything into the search textbox( either number or character) and the search result should display 10 records per page and the 11th records should go to the next page.
i have 3 files i search data from the database through array list in servlet and forwarded to the jsp page .
in jsp page i require 3 buttons thery are print, next and previous.You need paging. Helpful Google keywords will be "paging", "pagination" in combination with "jsp". Try it.
In a nutshell: just remember 2 variables: the first row to be displayed and the row count to be displayed at once. Add at least 2 buttons which changes those variables. The Next button which increments the first row value with the row count value. The Previous button which decrements the first row value with the row count value. Fairly straightforward. If you unfortunately find it hard somehow, consider a 3rd party paging tag library, such as Displaytag. Google can find it either.
The print button can be just a plain dumb button with only Javascript's window.print() in its onclick attribute.
i am giving piece of code
if anybody knows please correct it or Almost nobody here is going to read an unformatted piece of code nor going to fix it. Use code tags and ask questions the smart way.

"Layout" option in iPhoto 09 - multiple photos per page

I am trying to printing several different photos on a single page. While I can achieve this by selecting a smaller image size and letting iPhoto arrange them automatically I would like to adjust the layout. When I selected "Layout" (under "customize") earlier I was offered layouts for One, Two, Three etc. images per page but now I can't find how to get iPhoto to offer more than One image per page. Am I doing something wrong? With several pictured selected, how do I customize the layout?
Thanks
Duncan

Thanks - That is what I figured but the strange thing is that when I clicked on "Layout" 20 minutes before I posted this question it offered me page layout options for "One", "Two" "Three" and "Four" images per page with different configurations for each......but now I can't get those options - frustrating! And thinking about it, why would it say "One" under layout if there were no other options available?
Has anyone else experienced this? Do other iPhoto 09 users get multiple images per page options under "Layout"?
Thanks
Duncan

Performance Issue - Elapsed = DB Time

Hi,
Version 11202.
Generally , DB Time is higer then DB Time when looking at awr report.
When awr report that Elapsed=DB Time , what would you suggest me to check ?
Host Name        Platform                         CPUs Cores Sockets Memory(GB)
xxxxxxx          HP-UX IA (64-bit)                  16    16       4     127.84
              Snap Id      Snap Time      Sessions Curs/Sess
Begin Snap:     26904 22-Jul-11 16:00:04       392      13.2
End Snap:     26905 22-Jul-11 17:00:17       383      13.4
   Elapsed:               60.21 (mins)
   DB Time:               63.57 (mins)
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                           Avg
                                                          wait   % DB
Event                                 Waits     Time(s)   (ms)   time Wait Class
db file sequential read           9,173,973       2,907      0   76.2 User I/O
DB CPU                                              875          22.9
direct path read                    203,093         168      1    4.4 User I/O
db file parallel read                 5,247          48      9    1.3 User I/O
SQL*Net break/reset to client        15,109          13      1     .4 ApplicatioThanks

Yoav wrote:
Generally , DB Time is higer then DB Time when looking at awr report.I'm not sure what you intended to say here. Which of the two is normally larger in your environment.
When awr report that Elapsed=DB Time , what would you suggest me to check ?It's quite reasonable for that to happen. It just means that there was, on average, one session clocking database time an any point in time during the snapshot interval. Since you have 16 CPU cores, your system should be more than capable of handling that level of activity.
Justin

Ckeck Writer(XML), more than 1 check per page

Is it possible to print more than one check per page using check writer (XML)?. Preview looks fine (3 checks per page) but the output of the process that actually prints ( Payroll File Reporter ) keeps sending 1 check per page.
Thanks in advance,
Jose

To do a multiple records per page merge you use only one set of placeholders, in the upper left position. ID will duplicate everything as many times as will fit according to the spacing you set up in the merge options.

Set Maximum Rows Per Page not working

I want to display 50 rows per page and I tried the below but still I can see the default 15 rows per page.
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
Set to = 50
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Rows Per Page Selector
Removed the check mark and still shows 15 rows per page.

Run your report. Set the Rows to 50. Press Go. Select 'Save Report' from the 'magic wheel' menu and next select 'Save as default report settings'.
It is a rather long way, but seems the only one...
Roel

How to Control with Maximum Record per Page

Hi Every one
how can I control with maximum record per page with parameter sending from Form
ex.
if I set parameter with value=15 the report will run 15 rows per page ?
Can anyone help me Please ASAP ?
Thankx

PLay around with SRW.SETMAXROW , from memory that should do the trick.
Cheers.
N.

Can the Portal Activity Report show unique users per page?

Hello all
I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
Regards,
Martin

Hi sogaard,
It shows the no of unique logons.isnt it.
Try these blogs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
Hope this helps
Regards
Vineeth

APEX reports User elapsed / think time per page

Similar Messages

Maybe you are looking for