APEX Web page display suddenly broken -- Cannot display page.
I came in this AM and a file system had filled up. After fixing it I tried to bring up the main APEX web page to log into the application as the Admin development user for my application workspace.
I received an error - Unable to display web page from the client.
I checked the network, database and everything else and it all looks good.
Did something get locked up that I may not be aware of that needs to be reset ?
Any ideas ?
Thanks in advance,
Anon
Hi Anon,
Maybe a session is hanging?
A quick fix would probably be to restart your database and webserver (if you use that).
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
REWARDS: Please remember to mark helpful or correct posts on the forum
Similar Messages
-
when I open my safari it will no longer go directly to my yahoo home page, says.. Safari cannot open page because too many redirects accured, how do I fix this.
Clear the cache in Safari and have another try
Cheers! -
Switching displays with broken iMac display
I have no display on the iMac. I want to back up the hard drive before it is sent for repair. So I need to use external display to do so.
Using mini DVI to VGA adapter to connect iMac to Sony Bravia 40", but the TV will not pick up the signal (Probably due to incompatible resolution settings??).
Is there a way to switch the display settings without using monitor display to see what I'm doing?
Maybe I could do it with speakable commands which luckily is enabled on the computer!?
I was able to open system preferences and then display preferences (I think).
I've searched high and low now for an answer, but have come up with nothing.I have no display on the iMac. I want to back up the hard drive before it is sent for repair. So I need to use external display to do so.
Using mini DVI to VGA adapter to connect iMac to Sony Bravia 40", but the TV will not pick up the signal (Probably due to incompatible resolution settings??).
Is there a way to switch the display settings without using monitor display to see what I'm doing?
Maybe I could do it with speakable commands which luckily is enabled on the computer!?
I was able to open system preferences and then display preferences (I think).
I've searched high and low now for an answer, but have come up with nothing. -
On our enterprise network I have found that suddenly folks cannot display PDF's in the Internet Explorer 7 browser.
The software and versions that are affected are:
Adobe Acrobat Pro 8.3.3
Adobe Acrobat Pro 9.3.3
Adobe Reader 9.3.3
Troubleshooting steps I have done:
Unchecked the option to Display PDF in Browser and rechecked it/
Completely uninstalled Adobe Pro/Reader has no effect. This includes deleting all files in c:\program files\Adobe\ and c:\program files\common files\Adobe\Acrobat\
Rebooting then manually reinstalling.
It behaves the same for Adminstrator accounts.
I have deleted the AcroExch.Document registry key and then repaired Acrobat to replace it.
Not sure what else to try. Is there a registry fix or could this be set by a Group Policy? I assumed that if it was a Group Policy then it would just uncheck the 'Display in PDF Browser' option in Adobe preferences. Even if that IS checked, PDF files still open outside of Internet Explorer.
Also note: we have Internet Explorer 7. Enable 3rd Party Browser Extensions IS disabled by a Group Policy but I think that only affects the Acrobat Toolbar from being implemented, not displaying PDF in a browser.
Any other helpful suggestions on what to try next would be appreciated.Found the problem. It was a McAfee Host Intrusion Prevention Policy that was blocking it. Once that was updated, PDF files could display in IE.
-
My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
IE browser and Web Cache and SSL - Internet Explorer cannot display the web page
When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
LokeshHello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful. -
Itunes will not install as IE link "cannot display web page"
I have been having problems with downloading podcasts and iTunes updates. So I followed Apple support suggestions including removing and (trying) to reinstall iTunes. However every time I hit the link for the download it takes me to a small pop up window with the address shown below, which does not load and tell me that "Internet Explorer cannot display the web page"
Arrhh Help anyone?!?
http://appldnld.apple.com/iTunes10/061-8246.20100901.Zxsew3/iTunesSetup.exeSystem: Win7x64
Turn off ZoneAlarm.
“Run as administrative” Firefox.
I then went to the following install page which works:
http://www.adobe.com/software/flash/about/
It installed.
The following install page does not work:
http://get.adobe.com/flashplayer/
The following thread discusses the problem with http://get.adobe.com/flashplayer/ download.
Install Flash Plugin Manually in Firefox on Vista
With so many Firefox users, Adobe needs to fix the http://get.adobe.com/flashplayer/ download for Win7 users. -
Explorer Cannot Display Web Page Desk Top 3000J1157387-A11
Originally worked fine displayed web page withOUT a problem FOR OVER A YEAR. Starting in Jan 2008 (just after warranty EXPIRED) it just reports "cannot display web page" Using my Xp computer I can get all of the web pages to respond.
Using internal checks on the Lenovo 3000J it reports everything is OK.
I can receive updates on this computer and just today I installed all updates through 4/20/2008. Windows Upgrade works fine on the Lenovo. However I cannot access the web otherwise. I am typing this message on my Xp. Computer because I have not been able to get a webpage to display on the Lenovo
I want to stay with Vista Home Premium however HOW CAN I GET THE WEB PAGE TO DISPLAY ?
VIC
Message Edited by vicflack on 04-20-2008 10:51 AMThanks for the helf. I disabled the firewall which is norton. and then rebooted still not able to display the web-page. However I may have gotten closer to the problem.
When I select "Properties" from the file menu on the "Cannot display page" I get the following address:
res://ieframe.dll/dnserror.htm#http://www.yahoo.com
Of course it cannot display this page because it does not exist. The page I tried to load was http://www.yahoo.com when I select this page on my Xp computer it loads correctly and under file- properties -address http://www.yahoo.com and all is well with the world.
For some reason on my Lenovo Vista Home Premium Computer Internet EXployer is inserting
"res://ieframe.dll/dnserror#http://www.yahoo.com
Thanks for any help
Vic -
Receive ping throw WRT54G setup but cannot display web-pages.
Hi
I have a WRT54G router, connected to the same DSL modem for 4 years and everything was fine till last week. Since last week, i cannot display any web pages, despite the fact that i am connected to my ISP (it was checked with there support team).
I have 3 different laptops and 1 desktop with different browsers and different OS (XP, VISTA) on them and same antivirus (AVAST!).
I receive pings from all the laptops and desktop to the router (ping 192.168.1.1), which mean that they connect probably to the router
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administrator" tab and then under "diagnostic" tab, But I cannot display any web pages.
Does any one might know what may be the problem?
Thank you.Thank you for the quick respond.
I connect the computer directly to the modem and it work just fine.
When I ping throw command prompt in the computer (connected to the router) I receive the next massage "bla bla bla o recevie bla bla 5 packet loss or something".
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administration" tab and then under "diagnostic" tab.
The problem was solved yesterday by updating the firmware and reseting the router with the reset button.
Very wired.
Anyone have any idea what may was the problem? -
Web dynpro abap cannot display web page
Hello
when running Test in se80 on my web dynpro application the browser says it cannot display the web page.
1. the url of the wd application is http://<hostname>.domain.ext:8000/sap/bc/webdynpro/sap/<component name>
2. rz10 says that profile NSP_DVEBMGS00_<hostname> has icm/host_name_full = <hostname>.domain.ext
3. rz11 says that icm/host_name_full = <hostname>.domain.ext
4. smicm says that icm/host_name_full = <hostname>.domain.ext
5. in etc/hosts on vista 32bit version 6002 I have put:
127.0.0.1 localhost
127.0.0.1 <hostname>.domain.ext
10.10.0.10 <hostname>.domain.ext
<empty line>
I also have
SAPGLOBALHOST <hostname>
rdisp/mshost <hostname>
and no values at all for
SAPLOCALHOST
SAPLOCALHOSTFULL
in the profiles.
The following works:
http://localhost:50013/sapmc/sapmc.html?SID=NSP&NR=00&HOST=<hostname>.
Can anyone help me? I read that many of you have solved this but, you see, I do not understand what you have done.Setting icm/host_name_full to <hostname>.domain.ext in rz10 in profile NSP_DVEBMGS00_<hostname> means:
1) I can no longer see my web dynpro view layout in se80 - instead of the view layout I get a browser screen that says the page cannot be displayed;
2) I get the same browser screen saying the page cannot be displayed when running the wd application test.
If I remove that parameter in rz10 then:
3) I can see and work with my view layouts in se80;
4) I get a 500 rabax state error when I do the wd application test;
5) I can do a successful wd application test by changing the url manually in the browser from <hostname>:8000 to localhost:8000 ... as in
http://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName(FQDN). -
I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine. Any idea what the problem may be?
You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards. -
EBS(SSL enabled) URL 12.1.3 cannot display web page though apps services are up
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring MSC_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component | process-type | pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:oafm | 10466 | Alive
OC4JGroup:default_group | OC4J:forms | 10425 | Alive
OC4JGroup:default_group | OC4J:oacore | 10062 | Alive
OC4JGroup:default_group | OC4J:oacore | 10061 | Alive
OC4JGroup:default_group | OC4J:oacore | 10060 | Alive
OC4JGroup:default_group | OC4J:oacore | 10059 | Alive
HTTP_Server | HTTP_Server | 9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks, -
"Internet Explorer Cannot Display the web Page
on August 7th
I purchased a brand new computer that has
Vista Home premium on it,
To date I have not been unable to open this program.
I have been looking for help ever since,
I have been all over the net, I have tried
Lenovo sites.
I tried to call Lenovo, unfortunately I got no help there,
as I am deaf.
I looked through this site, in the hope that someone
who might have experienced this can help.
The Welcome center comes up when I start the Computer.
when I click on Internet explorer this is what I get.
Internet Explorer Cannot Display the web Page"
Most likely Causes:
*You are not connected to the Internet.
* The web site is encountering problems.
* There might be a typing error in the address.
"What can you try"
'Diagnose Connection Problems"
I did this and this is what I got.
Windows did not find any problems with this
Computer's network connection.
I tried more suggestions, and got more of the same.
I tried everything that looks promising, to no avail;
Please help if you can, it would be much appreciated;
Regards
Victoria
Lenovo 3000 H210 53552p desktop
Vista home Priemium 64Victoria,
There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
Dennis -
IE + SVG = "Cannot display XML page" ?
Dear friends,
I am from Taiwan. I have a question about SVG display on IE.
I have a very simply SVG file as the following code. I installed Ferdora R12 with apache web server (192.168.0.8) inside my company.
I installed Tomcat 6.0 on my PC(192.168.0.100, window 7 with IE8.0). I put this SVG file on Fedora, and I can see the vector graphs through
Chrome and Firefox, but not IE(already installed SVG viewer, with the error message as following). I put this SVG file on my PC, I can see the vector graphs by IE, Chrome and Firefox through Tomcat or opening file directly. I even put this SVG file on the web server of my company, and vector graphs can be displayed well through all of IE, Chrome and Firefox.
The problem seems only happen in the situation "Fedora R12 + IE". Do you have any idea of this problem? I really need your help.
Thank you.
======= Code =============
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg id="svg00" version="1.1" xmlns="http://www.w3.org/2000/svg" >
<svg id="svg01" x="0" y="0" width="654.1" height="654.1" version="1.1" xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink">
<a xlink:href="http://www.w3.org//Graphics//SVG//Overview.htm8">
<rect x="10" y="10" width="100" height="30" rx="10" ry="10"
style="fill:lightgrey"/>
<text x="30" y="30" font-size="12">Click here</text>
</a>
<a xlink:href="http://www.ibm.com//developerworks/">
<circle cx="100" cy="100" r="50" style="fill:grey"/>
<text x="80" y="100" font-size="12">Or here</text>
</a>
<a xlink:href="http://www.ibm.com/" target="new">
<polygon
points="60 160,165 172,180 60,290 290,272 280,172 285,250 255"
style="fill:dimgrey"/>
<text x="160" y="200" font-size="12">Or even here</text>
</a>
</svg>
</svg>
==========================
The error message is in Chinese, but I translate it as possible as I can.
====== Error message ==========
Cannot display XML page
Cannot use style table (or form) to view XML input. Please correct this problem and reload this page, or try again later.
Unidentified error with processing resourse
There is something wrong with 'http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd'
=============================Hi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi -
Web Dynpro-layout preview-Error-IE cannot display-service in SICF activated
Hello,
By starting a view in web dynpro framework, i have the error in tab layout "page cannot be displayed" from IE.
Before i make the change in the DNS and system32/../etc, the layout was displayed, but the web dynpro application cannot be started.
Now after those configurations and activation of services in SICF, i can start the web application only with firefox and not internet exploer, and, that internet explorer is preconfigured for the layout preview, i recieve all times the eror "cannot display" when i start a view in the layout tab.
1. How can i change settings so that view can be displayed in layout after i actived the (hope the suitables i.e. view designer) services in SICF - Default_host...
2. Is it possible to change IE to firefox as main browser for layout tab.
Note: For virtual domain i
1. add dns "domain.com" in the DNS
2. add in system32/etc/host file to "127.0.0.1 localhost", "10.10.0.10 sysserv.domain.com"
3. and trough tr. rz10 in the instance profil input the icm/.... ....domain.com
Through this three steps i could get the web dynpro application started,
but from the other side, the layout preview do not display the view again
and just send error the message: "THIS PROGRAM CANNOT DISPLAY THE WEBPAGE"
Many thanks for helping
arnaud
Edited by: Arnaud on Jul 15, 2010 4:36 PM
Edited by: Arnaud on Jul 15, 2010 8:31 PMHi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi
Maybe you are looking for
-
I have a new ipod nano but at the moment I am unable to download music through itunes. I'm so disappointed. I have created an Apple ID, reviewed and inputted all of my data for my account and still get told to 'review account' because my ID has not '
-
My MacBook Pro Retina crashes several times a week
I have a late 2013 MacBook Pro, 15 inch, Retina, with the latest software updates installed. It crashes several times a week, usually while I'm just surfing the web. The most recent crash was different, it just fully locked up- the pointer was mov
-
Hi MM Experts I have a scenario can any one help me to map in to SAP. Purchasing Process: u2022 A long time agreement is made with Vendor u2022 Vendor can be of Monthly /Weekly/Biweekly u2022 Agreement is created based on MPS (54 weeks) u
-
Align MathType equations in InDesign
Hello Anyone know how to align mathtype equations in InDesign CS 4 automatic? I read many discussions topics here about scripts that apply equations and align, but I want to know if there are one way to use any script just to align the equations auto
-
"java.lang.OutOfMemoryError: Java heap space" when comparing files
Hi, I need to take differences between the existing jazn-data.xml and the jazn-data.xml file downloaded from ADR and keep only the required changes. For this, I copied the contents of the new jazn file into the existing one and then tried to use the