API access to LSM 4.2.3 User Tracking

Hey.
Is there an API access to LSM 4.2.3 User Tracking ?
Cheers,
Tor Stefan Lura

Hi Afroj,
the OID (1.3.6.1.2.17.4.3.1.1) not walk
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x.1.3.6.1.2.1.17.4.3.1.1
SNMPv2-SMI::mib-2.17.4.3.1.1 = No Such Object available on this agent at this OID
the OID (1.3.6.1.4.1.9.9.156.1.1.2.1) not walk
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x 1.3.6.1.4.1.9.9.156.1.1.2.1
SNMPv2-SMI::enterprises.9.9.156.1.1.2.1 = No Such Object available on this agent at this OID
and if tape the simply snmpwalk it's ok:
[srvlms/root-ade ~]# snmpwalk -c iptread x.x.x.x
SNMPv2-MIB::sysDescr.0 = STRING: Linux release:2.6.18-194.26.1.el5PAE machine:i686
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.1348
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (240048448) 27 days, 18:48:04.48
SNMPv2-MIB::sysContact.0 = STRING:
SNMPv2-MIB::sysName.0 = STRING: CCM-FR-SUR-PUB
SNMPv2-MIB::sysLocation.0 = STRING:
SNMPv2-MIB::sysServices.0 = INTEGER: 72
IF-MIB::ifNumber.0 = INTEGER: 3
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: tunnel(131)$
mumm strange

Similar Messages

DI API - accessing objects with Read only permissions

Scenario: I have setup a user in B1 with "Read Only permissions" on the Business Partner. When I log into the DI API as this user and try instantiating the BP object, I get a message "Loged on user does not have permissions".
Why am I getting this? Shouldnt I be able to instantiate the object and read the property values. i understand that I cannot Add or Update because of read only permissions.
Is there a way we can retreive values for users using the DI API or should the best option be to write a SQL statement.
Thanks,
Gopal

Requiring the user to have full authorization to instantiate an object is a serious limitation for the DI API. It makes it virtually useless. After all it is supposed to be OOP and all the trimmings isnt it? It also takes a lot of control away from the user.
+1
Hi,
I have confirmation from B1 product definition, the DI API access for objects with Read only permissions will not be included in the 2007A version. It will be considered for the following version after 2007A.
There is a chapter called "Authorization Checks" in the SDK Help file specifying:
"SAP Business One performs authorization checks for the business objects and the infrastructure and meta data objects. If a user does not have full authorization to access the objects in SAP Business One, the user will not have permission to access the data belonging to the business objects using the DI API."
Regards
Trinidad.
*sigh*

BingAds API: Can we configure the same email id to get API access for multiple BingAds account ?

Hi Eric,
We help our customers to analyze their marketing performance. We have configured the email id e.g. [email protected] which has the API access to one of our customer BingAds Account. Now we are able to authenticate using Oath tokens and able to access customer
data using the given developer token.
Now i need your help to clarify the below.
1) Can i have the access to my other customer BingAds account using the same email Id i.e. [email protected] or Do i need have the two different users/email ids to access different BingAds account?
2) If it is possible to configure the same emailId/usert for different BingAds accounts , then i belive my Oauth tokens will be same in this case, but how about my devloper token , do i need to maintain two seperate developer tokens?
3) If its not possible to use the same email id for two BingAds account api access, is there any alternate way to have the common oauth authentication for both the accounts?
Thanks in advance.
Regards,
Sreekanth.
Sreekanth A

Hi Eric,
I have got to know from the BingAds support that i have to switch my account to Agency type to access multiple accounts data over API. But they only assist on this for Microsoft Managed BingAds account, but it can not access the data from BingAds account which
is managed by Yahoo.
If i need to create Agency type BingAds account which can have the API access to multiple BingAds accounts managed by Yahoo, what may be the process?
Can you please guide me on this? as of now i got the news is that to contact the Yahoo Account managers, if you have any more information on this , please let me know.
Thanks,
Sreekanth.
Sreekanth A

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

Is this itunes on the iPad or on my computer? Thank you for the reply.

HT1495 My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

GRC 10.0 Access Request Creation- Data Source of User Details

Hi Experts,
I was doing GRC 10.0 Configuration and found a query which I am not able to resolve.
While creation of any kind of Access Request in GRC through NWBC> Acces Management Tab>Access Request>Access Request Creation.
In the user details section, I can see the HR records( like Pernr, position, manager) have been visible to some extent.
My question is where from these details came in GRC. What configuration we should maintain to achieve these HR records?
Hope to get a quick response as this is one of the requirement of the implementation which I am doing with my customer.
Thanks,
Atanu

Alessandro,
Thanks for your response. It helped me to know certain things.
But when I am navigating to SPRO > GRC > Access Control > Maintain Data Sources Configuration > [User Detail Data Source], it is configured with a ECC system in target connector and User data type is maintained as "SU01".
Now my question is where from in my case the GRC is pulling the HR records (PA20) like PERNR, POSITION,PERSONEL AREA etc? SU01 does not provide these information. My ECC box is integrated with HR module, so is it taking the data from HR directly?
Thanks in advance!
Atanu

API access to Java Plug-In "x: clear classloader cache" in Java Console

I am using some third-party tools in a Java application I am developing.
I am encountering an error that can be worked around manually by issuing the subject command at the appropriate time. Is there API access to this functionality, so that I can programatically invoke the workaround?
Thanks in advance for your time and consideration.

Well, I finally came to a solution that is acceptable at least to me, if not ideal. I've started using the BouncyCastle lightweight API. This makes my code somewhat more complicated, and I had to bundle up all the BouncyCastle classes that I'm using into a jar file, and download that to my applet along with my client jar file (after signing the jar files). Using this Lightweight API bypasses the Cipher.getInstance() method all together, and is a little harder to use, but at least everything is working consistently now.
I still believe this to be a bug either in the ClassLoader or the Cipher.getInstance() method. I intend to try to write a test applet that reproduces the error in a more simple way and if I can pull that off, I'll submit a bug report to Sun.
Thanks to all who responded!!
Steve

Switching to Mac from WinXP - Can't access files of PC's secondary user

This part works:
To move files by connecting your Mac to your PC on the same network:
Make sure that both computers are turned on and connected to the Internet.
In the Finder on your Mac, choose Connect to Server from the Go menu to open the window.
Type your PC's network address in the Server Address text box using this format: smb://ServerName/ShareName, or select the name of your PC in this window (if it appears).
Click Connect.
Enter your PC's workgroup name, your user name, and your password when prompted, then select the volume or folder you wish to access.
Your PC volume should appear on your Mac Desktop.
Open the volume and drag and drop files directly from it to anywhere on your Mac.
But, once I get here, there are certain files I can't see. I want to start by migrating my photos. They reside in a subfolder of my wife's documents. She is a secondary user. As far as i can tell, i have all the sharing rights granted. Please help.
MacBook Pro Mac OS X (10.4.8) PC has winxp sp2 with 2 users

You will need to log into your wife's account in order to access any files stored in her user account. You can then move them to the /Users/Shared/ folder where you can then access them from your account.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Allowing Airwatch MDM access to the Captive-Portal guest users in pre-auth role for android and BB?

Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any   alias Airwatch svc-http permit
any   alias Airwatch svc-https permit
ip access-list session Google-Play-Store
               any   alias Google-Play any permit
ip access-list session BlackBerry-Access
               any   alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play                                                                                ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.

Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence!  Thanks,Chris

We have two company user,till now there are using same URL.but they wanted to access particular URL to related company user in single server

Hi Experts,
We have two company user,till now there are using same URL.but they wanted to access particular URL to related company user in single server.
As per my knowledge ,it is possible through create new aliases with different URLs in network.
But i dont how to create. Please help on this.
Thanks in advance.
Regards,
Prasad

Hi Prasad,
Please explain in clear english as to what is your requirement. I got lost after "two company user" . I suppose it means there are users from two separate company: A and B. They were using same portal till now: http://commonportal:50000/irj/portal.
Now they need different urls - specific for each company say companyAportal.com and companyBportal.com. But still the same old common portal in the end.
If that's your requirement please search the forum with correct terms, else "Google".
Thanks,

Is it possible access to dashboards by using network users insted of obiee

Hi,
can anybody have idea about this
is it possible access to dashboard by using network users.insted of obiee users.i.ewhen you are login into presentation services it will ask user name and password. in this case it will not like that when we are log in to the sysytem by using user name and password.by using that user name and password it can directly access to the dashboard is it possible or not?means that by using network username and password can i able to login to the dashboard by cliking the presentation url.with out asking username and password again.
please help me
thanking you

Yes, you can and if your presentation services are hosted on a windows server, thats lot more easy. While the presentation server is being promoted, you can have users get authenticated using LDAP/AD and that way, you need not go through typing username/pwd once again.
Configure SSO
Set IIS authentication to “Windows authentication”:
Open IIS Manager => Select Default website => Right-click => Properties => Directory Security tab => Authentication and access contol => Edit … => deselect “Enable anonymous access” => Select “Integrated Windows authentication” => Ok => Ok => Select All => Ok
Open the instanceconfig.xml file (located in OracleBIData\web\config). Set <SSO enabled = “true”>. Save and close file.
Restart your server and start your OBIEE services.. You are good to go now.
Like others said, may be you are better off with closing your questions so others can use it.

Restricting access to link based on a user's accesslevel

I've gotten the DW login feature working for restricting
access to pages based on a user's successful login and associated
accesslevel. However, I have some links that open an Excel
spreadsheet and an Outlook calendar. Is there an easy way to
restrict access to a link so that an unauthorized user can't
navigate to the link? Here's my code for the link:
<td height="19" colspan="3"
valign="top"><a
href="STI-Intranet/XLS/PROD_SCHED.xls" title="Current Production
Schedule (Read Only)">STI Production Schedule
</a></td>
<td height="4%" valign="top"><a href="
http://server_3/public/cal_engineering/"
title="FROM INTRANET">INT</a></td>

What server side language are you using? Do the links need to
be restricted
to just one access level, or multiple levels? Should it be
blocked for only
one level or multiple?
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technologies, Inc.
=============================
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"mslee1965" <[email protected]> wrote in
message
news:e52o7e$3ak$[email protected]..
> I've gotten the DW login feature working for restricting
access to pages
> based
> on a user's successful login and associated accesslevel.
However, I have
> some
> links that open an Excel spreadsheet and an Outlook
calendar. Is there an
> easy
> way to restrict access to a link so that an unauthorized
user can't
> navigate to
> the link? Here's my code for the link:
>
> <td height="19" colspan="3"
valign="top"><a
> href="STI-Intranet/XLS/PROD_SCHED.xls" title="Current
Production Schedule
> (Read
> Only)">STI Production Schedule
</a></td>
>
> <td height="4%" valign="top"><a
href="<a target=_blank
> class=ftalternatingbarlinklarge
> href="
http://server_3/public/cal_engineering/"">http://server_3/public/cal_engin
> eering/"</a> title="FROM INTRANET"> Helvetica,
sans-serif">INT</a></td>
>
>

Bought mlbtv thru itunes. try to access mlbtv and get message that user name or password incorrect. both were correct but created new password anyway. got same message--password or user incorrect.

Bought mlbtv through itunes. Tried to access mlbtv and got message that user name or password not recognized. They were both correct. Created new password and user name anyway. Still not recognized.

Are you using the MLB.com At Bat app for iPhone/iPad?
-> https://itunes.apple.com/us/app/mlb.com-at-bat/id493619333?mt=8&ign-mpt=uo%3D4

HEY SMART GUYS-CHECK YOUR LINK TO ARTICLE: Firefox makes random sounds KB article. CAN NOT ACCESS IT UNLESS YOUR ARE REGISTERED USER!!!!

Title says it all. New article "Firefox makes random sounds KB article" on main page http://support.mozilla.com/en-US/kb/Firefox+Support+Home+Page to help users with the Pac-man and siren sounds can only be accessed by those who are registered users. Not much help to most users here asking questions!!!
FIX IT!!!!!

Sorry, we got so much traffic on the site, it was taking a few minutes for the link to go live. I don't think a sticky is needed because most people posting to the forums don't read the forums first so it won't do much good.

API access to LSM 4.2.3 User Tracking

Similar Messages

Maybe you are looking for