API exposed to find the device is capable to make call

Is any API is exposed to get know the device is capable for making call via network carrier. I was looking this in WinRT Universal(8.1).
So that i will work in Tab, Surface and also in WindowsPhone.
Sankar

Not at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Similar Messages

  • TS3694 mi ipod touch will not boot, it goes to the apple logo then shuts off, I tried to restore it but it shuts off while restore is going on then it saids it can not find the device

    Hello,
    I need help before i go to the apple store for help.
    My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
    It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
    I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
    What do i need to do.
    Thank you for your help.
    regards,
    Mario
    PS. The OS I am not sure do not remember exactly.

    - Reboot the computer
    - Try another USB port
    - Try another cable try another cable
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT201472 I tried to find my iPad through find my iPad device on my iPhone It says device is offline I am also given option to lock the iPad ZIf I do that will I be able to find the device? Will it need to go online  and not do so once I lock it in lost mo

    I am trying to find my lost iPad using my iPhone and the findmyipad application
    My iPad is listed but cannot be located now because it is not connected to Internet
    I have option to lock the iPad in lost mode If I do that I fear that will make it impossible for the iPad to go online and thus Renee the application to find it useless Please advise

    You cannot lock or find the device until it comes online. You can schedule a lock sequence to be sent once the device is online. That's it. Furthermore, if whoever finds the device completely erases it, then even when it comes online you will not be able to track it.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • HT1766 Where do I find the Devices tab in itunes to back up my i-phone?

    I just go the i-phone 5s and want to transfer my data and apps from my old iphone.  I can't find the device tab in itunes to download my old phone so I can transfer the date to my new one.
    thanks.

    You should check your settings, as ED3Ksuggests. I don't think the ringtones tab shows up until you add some ringtones.
    If you are using an app to make (or otherwise procure) ringtones on your iOS device, you will need to open that device in iTunes, go to the Apps tab, and scroll down to the bottom. Select the ring tone app from the list and locate the new file there first. Drag it out of iTunes or save it, and then import that file into the iTunes Library (drag it onto the iTunes icon in the Dock).

  • How can I find the devices that use my Apple ID

    I Need to find the devices that use my apple ID

    Store > View Account.  On the Account Information page, click on Manage Devices, and you will see the list.

  • Netflix wants my device code in order for me to be able to download movies. Where do I find the device code?

    Netflix is asking for my device code in order for me to be able to download movies on my iPad.  Where do I find the device code?

    You don't download movies from netflix-you stream them.
    You dont use the netflix website, go into the app store and download the netflix app and use it.

  • HT4993 I'm trying to install the "RSA SecurID" application on my new iPhone 5s, but I need the device id. Can you tell me where to find the device Id?

    I'm trying to install the "RSA SecurID" app on my new iPhone 5s, but I need the device id. Can you tell me where to find the device id?

    -> http://www.emc.com/security/rsa-securid/rsa-securid-software-authenticators/ipho ne-and-ipad.htm

  • Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • Where do I find the 'device options' or 'clock' applicatio​n on my 7130c?

    I'm wanting to set the time and date on my 'new to me' blackberry 7130c; the guide says to click 'date/time'  in the 'device options'.  Where do I find the 'device options' to perform this task??? help me please!   

    From the Home screen select Options and then Date\Time.

  • HT5622 Trying to send some  ringtone files to my new iphone 4s... thprogram tells me to go to itunes and click on my phone under devices... i can not find the device button anywhere on your home page

    Trying to send some ringtones from desk top computer to my iphone 4s.... the instructions tell me to go to itunes...click on devices and find my phone.... where would i find the device button on your home page/

    u

  • IPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar.....Help!

    iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!

    You can use iTunes, connect iPod Touch to computer iTunes.
    Select iPod Touch in iTunes under DEVICES (left panel)
    Select Books tab (right panel near the top)
    Deselect those books that you have read
    Click Sync button (bottom right)
    Have a read to get up to speed using iPod Touch
    iPod touch User Guide (For iOS 5.0 Software)

  • HT5868 I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question.  I hit Trust - yet it still doesn't seem to find the device on my computer.  It doesn't show up in my iTunes list of devi

    I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question.  I hit Trust - yet it still doesn't seem to find the device on my computer.  It doesn't show up in my iTunes list of devices.

    Hi Dalegu219,
    Thanks for visiting Apple Support Communities.
    If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
    You can use these steps to make sure iTunes is opening the library on your external drive:
    If iTunes is running, quit iTunes.
    If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
    If you're using a Mac, open iTunes and immediately hold down the Option key.
    You should see one of these screens:
    Pick Choose Library and locate the library on your external hard drive.
    From:
    iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
    If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
    iTunes: How to re-create your iTunes library and playlists - Apple Support
    Best Regards,
    Jeremy

  • I can not get my Skylanders Portal of Power to sync with my ipad. I turned on Blue Tooth in setting on the ipad and pushed the sync button on the bottom of the portal but it never finds the device. Help

    I can not get my Skylanders Portal of Power to sync with my iPad. Blue Tooth is on in the settings and I push the sync button on the bottom of portal but it never finds the device. HELP

    Has anyone found a fix to this?

  • HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

    I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

    Hello jlb1977,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Best of luck,
    Mario

  • Problems after virus disinfection, when I plug in my iPod, it asks if I want to scan and fix, but then it can't find the device

    Problems after virus disinfection, when I plug in my iPod, it asks if I want to scan and fix, but then it can't find the device. What should I try?

    I used Avast and Malwarebytes. The computer was severly infected with the FBI virus. I had to do a repair reinstall of Windows 7. The client is upset about her iPod, which at this point is the only thing still having a problem. I'm not familiar with Apple products, but I told her I would research it.

Maybe you are looking for

  • Querying Blobs in Forms

    In the publication 'Oracle 9i Developement' by Dan Hotka one of the form examples says copy from an image, say in Paint Shop Pro, and paste it into an Image item on the form. It commits ok but the image isnt displayed when i query the form. As an alt

  • Is it possible RecordSetsPerMessage with MessageTransformBean

    Hi Experts, I need to pick up large zip files from source directory and send it to CRM, I am using message transform bean for FCC in sender file adapter because source is zip file, I know normal FCC got record sets per message parameter, is it possib

  • How to keep an earlier version of AW in case update causes problems?

    I have several ideas on how to make this update less of a problem just in case I can't access older docs. Is any of these solutions workable? Is it possible to burn a useable CD of my current AW 6 folder in case the update to 6.2.9 doesn't work - or

  • Album Art - click to make bigger?

    On my fifth gen iPod video, I liked being able to play a song, click through the rewind/fast forward view, the rating view, and then the "large" cover art view. (Does that make sense?) However, with my new iPod classic, when I'm playing a song, I can

  • VPD Question

    Hi all, I have a technical question about VPD. The documentation says, VPD is working the following way: When a user issues a statement, the statement is automaticly rewritten. This is done by appending a predicate delivered by a pl/sql function to t