API Restrictions and Limitations

The Adobe Campaign APIs are not designed or intended to be used for bulk inserts into the recipient or any other large volume table in the platform's database. Instead, the developer or marketing user should be loading flat files which have been FTP’d to Adobe Campaign server to load any data in bulk.
Other options include querying local datamart tables (using mapped tables or FDA) when Adobe Campaign is installed on-premise or use the CRM connector to pull data into the system from other sources in bulk in a technical workflow.
API calls should be used for queries, updates, or one-time inserts into the Adobe Campaign database. The API should never be used for bulk inserts.
If these best practices are not followed, the Adobe Campaign application could experience performance or stability issues and/or loss of service due to improper design of data flows into the system.

out.println("ACK CR LF") will print the string "ACK CR LF",
I think you're looking for something more like
out.writeChar(6); if you're using dataOutputStreams for example. This should write the unicode character 6 which should be ACK
either that or out.print((char)6); should probably do it if you're using some other kind of print stream...I'm not even sure you need to cast that.
Hope this helps, good luck with the robot, sounds cool!

Similar Messages

Hreap restrictions and limits

Is there any structural limit in the deployment of an hreap solution?
I mean if there is some limitation in the number of hreap ap's/sites on 440x controllers, a minimum requirement for wan bandwidth/delay and so on.
I think it's particularly interesting to know how much control bandwitdth needs to be reserved on the wan link for each remote ap.
Tnx,
Max.

Hi Max,
You are most welcome my friend! Here is some related info;
For HREAP's connected to a centralized wireless LAN controller, the WAN link must support a minimum speed of 128-kbps WAN throughput and 100-ms maximum roundtrip latency between each HREAP and the wireless LAN controller.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/prod_white_paper0900aecd804f1a23_ns337_Networking_Solutions_White_Paper.html
Hope this helps!
Rob

PI 7.1 "stateless" service interfaces prerequisites and limitations

are there any prerequisites and limitations for "stateless" Service interfaces.
We are directly implementing PI 7.1, (i.e not upgrading form 7.0 or 3.0).
so for all our service interfaces, shall we safely use tne interface pattern "statelss" instead of "Stateless(xi 3.0 compatible)".
if use the "stateless", are there any addition prerequisites or constraints/limitations.
can we use abap proxies, java proxies, providing webservices via xi, and consuming other webserivces in xi, all adapters, asynch, synch scenarios with "stateless" interface patterns.
In short, are there any things that can be done using "Stateless(xi 3.0 compatible)" and cannot be done using "stateless" interface
are there any specific requirements for using "Stateless(xi 3.0 compatible)" even in newly implemented PI 7.1
thanks in advance,
Madhu.

When it is an upgrade from 7.0 to 7.1 the default Interface pattern is Stateless (XI 30 Compatible)
Using Stateless Interface Patterns wont cause any harm/ restriction on any of the development.
The only twist will be in the way a condition is specified in the Receiver Determination.
For any Interface pattern (other than Stateless(XI30 Compatible)) you wont be able to see the message structure in the Condition Editor of Receiver Determination. All other functionality (Async, Sync, Proxy) will be available.
In such a case Condition should be specified as shown in this blog: /people/abhishek.salvi/blog/2009/07/15/sap-pi71-receiver-determination-xpath-and-you
Regards,
Abhishek.

How to set restrictions and what they mean

How to set restrictions one the different oracle users and what can they do within the set restrictions, their limitations.

What cardinality means

HT201304 It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.

Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.

There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards.

Lost all my built in apps on my Iphone3GS, i have checked restrictions and spotlight search and i do not have phone,imessage,or appstore apps anymore,please help me!

Lost my phone,imessage,and app store apps and when i try to restore it,its still showing up like this,i have checked restrictions and spotlight search but still no luck,please help!

Settings > General > Reset > Reset Home Screen Layout

What do i have to do if in my ipod i have locked restrictions and i want to unlocke it but i dont know the password.

what do i have to do if in my ipod i have locked restrictions and i want to unlocke it but i dont know the password.

You will have to restore as new

After upgrading software on my iphone 5. I am not able to in app purchases. I have tried to turn of the restrictions and it is still not letting me make purchases.

After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Bapi_pr_create not working for package number for service and limits

Hi Experts,
I am copying the existing service and limits values from the existing package number to new package number using BAPI_PR_CREATE. I am getting Some error (In case of account assignment, please enter acc. assignment data for item).
Please let me know any one get the solution for this problem. If anyone know some thing about this problem Please throw some light, so that I will check it out further.
Thanks for you help in Advance.
Regards,
Nagaraju.

Hello,
I got almost the same problem.
Im trying to copy existing PR's too, all works well until it comes to services. Functions return says to enter account data etc.
How should i copy service records?
Best regards
P.S. Old function "BAPI_REQUISITION_CREATE" doesnt work because of Unicode system.

My restrictions are on and I didn't turn them on. The code is not the one I use to unlock my ipad. How can I find out the code to turn off my restrictions and why did it turn on?

My restrictions are turned on. I didn't turn them on. The only code I've used on my ipad is to unlock it and that code won't work on my restrictions. How do I turn off restrictions and prevent them being turned on again?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

HT5492 I had disabled my restrictions and my apps are not showing again in the screen!

Hi everyone!
please help me with my probleme
I had enabled my restrictions by accidant and some of my icons apps gone missing and if I wanted to open them I have to go to the app store, then I disabled my restrictions and they are still not showing on the home screen!
please if anyone know how to make them appear again pleeaaase tell me!

iPhone apps don't work on Macs and Mac apps don't run on iOS devices like an iPhone. If you sync an iPhone to a Mac, the apps from the iPhone are stored in the Mac's iTunes app's media library as a backup.
The App Store app on a Mac is not the same as the App Store app on the iPhone. The Mac version is the Mac App Store, apps for Macs. The iPhone version is the iTunes App Store, apps for iOS devices.

HOW TO CONFIGURE GUEST NETWORK AND LIMITE BANDWIDTH

Dear all,
Please help me how to configure internet access rule and limited the bandwidth for guest network via TMG Forefront 2010.
Thanks you & best regards,
Hung Viet

Hi，
First you can create the new network set which is mapped to guest subnet, after that you can create access rule for this network set.
If you want to control bandwidth, you may need 3-party tool like this:http://www.bsplitter.com/
Best Regards
Quan Gu

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset

What are the key benefits and limitations of new pricing model of X5-2?

What are the key benefits and limitations of new pricing model that started with X5 version?

1. Elastic Configurations
Size/price hardware by the number of servers; Fixed configs no longer required
Start with 2 Database Servers and 3 Storage Servers. Incrementally add database or storage servers online.
2. Capacity-on-Demand (CoD)
Upon installation, activate 40-100% of the cores per server and reduce software licenses; Applies to Eighth Rack now too
Activate and license more cores when needed; Active cores may not be deactivated
3. OVM and Trusted Partitions
License software on Virtual CPUs within a VM; Ideal for special-purpose DB options
You can mix different combination of options for different DB on one Exadata.
OVM has no License cost; support is included with premier hardware support
Limitation:
At least 40% of usable cores on the machine must be licensed for Oracle software
Cannot use both OVM and CoD to license less than 40% of cores
A server must be virtualized or non-virtualized – not mixed
A RAC cluster can mix virtualized and non-virtualized servers
4. “Flash Drive” License Metric for EF Storage Server Software
$20K/drive; 8 flash drives/EF server vs 12 disk drives/HC server = 33% higher list
Can transfer licenses between Flash Drive (2 licenses/drive) and Disk Drive (1 license/drive) – part # is the same

Restrictive and non-restrictive procedures!

Hi all,
Wanted to knwo what are restrictive and non-restrictive procedures in oracle forms.
Thanks and Regards

I think where Frank said "one-time triggers" he meant "non_repeating TIMERS".
Here is an alternative way to get around the restricted built-in problem which does not seem to be widely known:
Create two numeric control fields, say TRIGGERING_FIELD and TRIGGERED_FIELD.
TRIGGERED_FIELD has a formula calculation property of
MY_FUNCTION(:TRIGGERING_FIELD)
MY_FUNCTION is created in the form program units and can do anything you want, including restricted built-ins. The value it actually returns is irrelevant (although you could use it as a return code if you want).
Then all you need to do is modify the value of TRIGGERING_FIELD (perhaps multiply it by -1 ) which you can do in a trigger that does not allow restricted built-ins. The calculation will see that its input parameter has changed and will recalculate, thus running the function and doing all the restricted stuff.

API Restrictions and Limitations

Similar Messages

Maybe you are looking for